Plastic instability: Criteria and computational approaches

Archives of Computational Methods in Engineering

Volumn 4, Issue 2, 1997, Pages 111-151

  Petryk, H ^a  

^a INSTITUTE OF FUNDAMENTAL TECHNOLOGICAL RESEARCH   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0031517544     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF03020127     Document Type: Article

References (290)

1. Abeyratne, R. and Triantafyllidis, N. (1981), "The emergence of shear bands in plane strain", Int. J. Solids Structures, 17, 1113-1134.
2. Aifantis, E.C. (1984), "On the microstructural origin of certain inelastic models", ASME J. Engng. Mat. Techn., 106, 326-330.
3. Aifantis, E.C. (1987), "The physics of plastic deformation", Int. J. Plasticity, 3, 211-247.
4. An, L. and Schaeffer, D. (1992), "The flutter instability in granular flow", J. Mech. Phys. Solids, 40, 683-698.
5. Anand, L. and Spitzig, W.A. (1980), "Initiation of localized shear bands in plane strain", J. Mech. Phys. Solids, 28, 113-128.
6. Anand, L. and Spitzig, W.A. (1982), "Shear band orientations in plane strain", Acta Metall., 30, 553-561.
7. Ariaratnam, S.T. and Dubey, R.N. (1969), "Some cases of bifurcation in elastic-plastic solids in plane strain", Q. Appl. Math., 3, 349-358.
8. Armero, F. and Garikipati, K. (1995), "Recent advances in the analysis and numerical simulation of strain localization in inelastic solids", In: Computational Plasticity: Fundamentals and Applications (D.R.J. Owen and E. Oñate, Eds.), Vol. I, pp. 547-573, Pineridge Press, Swansea.
9. Asaro, R.J. (1979), "Geometrical effects in the inhomogeneous deformation of ductile single crystals", Acta Metall., 27, 445-453.
10. Asaro, R.J. (1983), "Micromechanics of crystals and polycrystals", Adv. Appl. Mech., 23, 1-115, Acad. Press, New York.
11. Asaro, R.J. and Rice, J.R. (1977), "Strain localization in ductile single crystals", J. Mech. Phys. Solids, 25, 309-338.
12. Bardet, J.P. (1990), "Finite element analysis of surface instability in hypoelastic solids", Comp. Meth. Appl. Mech. Engng., 78, 273-296.
13. Bardet, J.P. (1991), "Analytical solutions for plane strain bifurcation of compressible solids", ASME J. Appl. Mech., 58, 651-657.
14. Bassani, J.L., Durban, D. and Hutchinson, J.W. (1980), "Bifurcations at a spherical hole in an infinite elastoplastic medium", Math. Proc. Camb. Phil. Soc., 87, 339-356.
15. Bassani, J.L., Hutchinson, J.W. and Neale, K.W. (1979), "On the prediction of necking in anisotropic sheets", In: Metal Forming Plasticity (H. Lippmann, Ed.), pp. 1-13, Springer-Verlag, Berlin Heidelberg.
16. Batdorf, S.B. (1949), "Theories of plastic buckling", J. Aeronaut. Sci., 16, 405-408.
17. Batdorf, S.B. and Budiansky, B. (1949), "A mathematical theory of plasticity based on the concept of slip", NACA TN , No. 1871.
18. Bažant, Z.P. (1988), "Stable states and paths of structures with plasticity or damage", ASCE J. Engng. Mech., 114, 2013-2034.
19. Bažant, Z.P., Belytschko, T. and Chang, T.P. (1984), "Continuum theory for strain softening", J. Eng. Mech. ASCE, 110, 1666-1692.
20. Bažant, Z.P. and Cedolin, L. (1991), Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories, Oxford Univ. Press, New York.
21. Bažant, Z.P. and Lin, F.-B. (1988), "Non-local yield limit degradation", Int. J. Num. Meth. Engng., 26, 1805-1823.
22. Bažant, Z.P. and Pijaudier-Cabot, G. (1988), "Nonlocal continuum damage, localization instability and convergence", ASME J. Appl. Mech., 55, 287-293.
23. Belytschko, T., Fish, J. and Bayliss, A. (1990), "The spectral overlay on finite elements for problems with high gradients", Comp. Meth. Appl. Mech. Engng., 81, 71-89.
24. Belytschko, T., Fish, J. and Engelmann, B. (1988), "A finite element with embedded localization zones", Comp. Meth. Appl. Mech. Engng., 70, 59-89.
25. Belytschko, T., Lasry, D. (1989), "A study of localization limitiers for strain softening in statics and dynamics", Comput. Struct., 33, 707-715.
26. Belytschko, T. and Lu, Y.Y. (1992), "A curvilinear spectral overlay method for high gradient problems", Comp. Meth. Appl. Mech. Engng., 95, 383-396.
27. Benallal, A., Billardon, R. and Geymonat, G. (1989), "Conditions de bifurcation à l'intérieur et aux frontières pour une classe de matériaux non-standards", C. R. Acad. Sci. Paris, Série II, t. 308, 893-898.
28. Benallal, A., Billardon, R. and Geymonat, G. (1990), "Phénomènes de localisation à la frontière d'un solide", C. R. Acad. Sci. Paris, Série II, t. 310, 679-684.
29. Benallal, A. and Tvergaard, V. (1995), "Nonlocal continuum effects on bifurcation in the plane strain tension-compression test", J. Mech. Phys. Solids, 43, 741-770.
30. Bigoni, D. (1995), "On flutter instability in elastoplastic constitutive models", Int. J. Solids Structures, 32, 3167-3189.
31. Bigoni, D. and Hueckel, T. (1991), "Uniqueness and localization - Part I and II", Int. J. Solids Structures, 28, 197-213, 215-224.
32. Bigoni, D. and Zaccaria, D. (1992), "Loss of strong ellipticity in non-associative elastoplasticity", J. Mech. Phys. Solids, 40, 1313-1331.
33. Bigoni, D. and Zaccaria, D. (1992), "Strong ellipticity of comparison solids in elastoplasticity with volumetric non-associativity", Int. J. Solids Structures, 29, 2123-2136.
34. Bigoni, D. and Zaccaria, D. (1994), "On the eigenvalues of the acoustic tensor in elastoplasticity", Eur. J. Mech. A/Solids, 13, 621-638.
35. Biot, M.A. (1965), Mechanics of Incremental Deformations, John Wiley & Sons, New York.
36. Borre, G. and Maier, G. (1989), "On linear versus nonlinear flow rules in strain localization analysis", Meccanica, 24, 36-41.
37. Borst, R. de (1988), "Bifurcations in finite element models with a non-associated flow law", Int. J. Num. Anal. Methods Geomech., 12, 99-116.
38. Borst, R. de (1991), "Simulation of strain localization: a reappraisal of Cosserat continuum", Eng. Comput, 8, 317-332.
39. Borst, R. de (1992), "Gradient-dependent plasticity: formulation and algorithmic aspects", Int. J. Num. Meth. Engng., 35, 521-539.
40. 2-flow theory for polar continua", Comp. Meth. Appl. Mech. Engng., 103, 347-362.
41. Borst, R. de and Mühlhaus, H.-B. (1992), "Gradient-dependent plasticity: formulation and algorithmic aspects", Int. J. Num. Meth. Engng., 35, 521-539.
42. Borst, R. de and Sluys, L.J. (1991), "Localisation in a Cosserat continuum under static and dynamic loading conditions", Comp. Meth. Appl. Mech. Engng., 90, 805-827.
43. Bruhns, O.T. (1982), "Bounds to the critical stresses in bifurcation of cylindrical specimens in the case on non-associated flow laws", Stability in the Mechanics of Continua (F.H. Schroeder, Ed.), pp. 46-56, Springer, Berlin.
44. Bruhns, O. and Thermann, K. (1974), "Stabilitätsprobleme elastoplastischer Kontinua", ZAMM 54, T73-T75.
45. Budiansky, B. (1959), "A reassessment of deformation theories of plasticity", ASME J. Appl. Mech., 26, 259-264.
46. Burke, M.A. and Nix, W.D. (1979), "A numerical study of necking in the plane tension test", Int. J. Solids Structures, 15, 379-393.
47. Chambon, R. (1989), "Une classe de lois de comportement incrémantalement nonlinéaires pou les sols non visqueux - résolution de quelques problèmes de cohérence", C. R. Acad. Sci. Paris, Série II, t. 308, 1571-1576.
48. Chambon, R. and Desrues, J. (1985), "Bifurcation par localization et non linéarité incrémentale: un example heuristique d'analyse complète", Plastic Instability, Proc. Considère Memorial, pp. 101-113, Ecole Nat. Ponts Chauss. Press, Paris.
49. Chau, K.-T. and Rudnicki, J.W. (1990), "Bifurcations of compressible pressure-sensitive materials in plane strain tension and compression", J. Mech. Phys. Solids, 38, 875-898.
50. Chen, W.H. (1971), "Necking of a bar", Int. J. Solids Structures, 7, 685-717.
51. Cheng, S.Y., Ariaratnam, S.T. and Dubey, R.N. (1971), "Axisymmetric bifurcation in an elastic-plastic cylinder under axial load and lateral hydrostatic pressure", Quart. Appl. Math., 29, 41-51.
52. Cheng, Y.S. and Lu, W.D. (1993), "Uniqueness and bifurcation in elastic-plastic solids", Int. J. Solids Structures, 30, 3073-3084.
53. Christoffersen, J. and Hutchinson, J.W. (1979), "A class of phenomenological corner theories of plasticity", J. Mech. Phys. Solids, 27, 465-487.
54. Chu, C.-C. (1979), "Bifurcation of elastic-plastic circular cylindrical shells under internal pressure", ASME J. Appl. Mech. 46, 889-894.
55. Coleman, B.D. and Hodgon, M.L. (1985), "On shear bands in ductile materials", Arch. Rat. Mech. Anal., 90, 219-247, 1985.
56. Cowper, G.R., Onat, E.T. (1962), "The initiation of necking and buckling in plane plastic flow", Proc. 4th U.S. Nat. Congr. Appl. Mech., 2, pp. 1023-1029, ASME, New York.
57. Crisfield, M.A. (1981), "A fast incremental/iterative solution procedure that handles snap-through", Computers & Structures, 13, 55-62.
58. Crisfield, M.A. and Shi, J. (1991), "A review of solution procedures and path-following techniques in relation to the non-linear finite element analysis of structures", In: Nonlinear Computational Mechanics (P. Wriggers and W. Wagner, Eds.), pp. 47-68, Springer, Berlin.
59. Darve, F., Flavigne, E. and Rojas, E. (1986), "A class of incrementally non-linear constitutive relations and applications to clays", Comp. Geotechnics, 2, 43-66.
60. Darve, F. and Labanieh, S. (1982), "Incremental constitutive law for sands and clays: simulations of monotonic and cyclic tests", Int. J. Numer. Anal. Methods Geomech., 6, 243-275.
61. Desrues, J. and R. Chambon, (1989), "Shear band analysis for granular materials: the question of incremental nonlinearity", Ing.-Archiv, 59, 187-196.
62. Dietrich, L. (1980), "Analysis of necking in cylindrical bar of hardening materials", Arch. Mech., 32, 389-402.
63. Dietsche, A., Steinmann, P. and Willam, K. (1992), "Micropolar elastoplasticity and its role in localization analysis", Int. J. Plasticity, 8, 361-384.
64. Dowaikh, M.A. and Ogden, R.W. (1990), "On surface waves and deformations in a pre-stressed incompressible elastic solid", IMA J. Appl. Math., 44, 261-284.
65. Dowaikh, M.A. and Ogden, R.W. (1991), "Interfacial waves and deformations in pre-stressed elastic media", Proc. R. Soc. London, A 433, 313-328.
66. Drucker, D.C. (1950), "Some implications of work hardening and ideal plasticity", Q. Appl. Math., 7, 411-418.
67. Drucker, D.C. (1951), "A more fundamental approach to plastic stress-strain relations", Proc. 1-st U.S. Nat. Congr. Appl. Mech., pp. 487-491, ASME.
68. Drucker, D.C. (1959), "A definition of stable inelastic material", J. Appl. Mech., 26, 101-106.
69. Drucker, D.C. (1964), "On the postulate of stability of material in the mechanics of continua", J. Méc., 3, 235-249.
70. Dubey, R.N. and Ariaratnam, S.T. (1969), "Bifurcation in elastic-plastic solids in plane stress", Q. appl. Math., 3, 381-390.
71. Duszek, M.K. and Perzyna, P. (1988), "Influence of kinematic hardening on plastic flow localization in damaged solids", Arch. Mech., 40, 595-609.
72. Fedelich, B. and Ehrlacher, A. (1989), "Sur un principe de minimum concernant des matériaux à comportement indépendant du temps physique", C. R. Acad. Sci. Paris, Série II, t. 308, 1391-1394.
73. Fish, J. and Belytschko, T. (1988), "Elements with embedded localization zones for large deformation problems", Comput. Struct., 30, 247-256.
74. Fleck, N.A. and Hutchinson, J.W. (1993), "A phenomenological theory for strain gradient effects in plasticity", J. Mech. Phys. Solids, 41, 1825-1857.
75. Gotoh, M. (1985), "A class of plastic constitutive equation with vertex effect - I, II", Int. J. Solids Structures, 21, 1101-1116, 1117-1129.
76. Gotoh, M. (1985), "A class of plastic constitutive equation with vertex effect - III. Applications to calculation of FLD of metal sheets", Int. J. Solids Structures, 21, 1131-1145.
77. Gotoh, M. (1985), "A class of plastic constitutive equation with vertex effect - IV. Applications to prediction of forming limit strains of metal sheets under nonproportional loadings", Int. J. Solids Structures, 21, 1149-1163.
78. Gudehus, G. and Tejchman, J. (1991), "Some mechanisms of a granular mass in a silo-model tests and a numerical Cosserat approach", Advances in Continuum Mechanics, pp. 178-193, Springer, Berlin.
79. Gurson, A.L. (1977), "Continuum theory of ductile rupture by void nucleation and growth, Part I: Yield criteria and flow rules for porous ductile materials", ASME J. Eng. Mat. Techn., 99, 2-15.
80. Hadamard, J. (1903), Leçons sur la Propagation des Ondes et les Equations de l'Hydrodynamique, Hermann, Paris.
81. Hill, R. (1952), "On discontinuous plastic states, with special reference to localized necking in thin sheets", J. Mech. Phys. Solids , 1, 19-30.
82. Hill, R. (1956), "New horizons in the mechanics of solids", J. Mech. Phys. Solids, 5, 66-74.
83. Hill, R. (1957), "On the problem of uniqueness in the theory of a rigid-plastic solid", J. Mech. Phys. Solids, 5, 153-161, 302-307.
84. Hill, R. (1957), "Stability of rigid-plastic solids", J. Mech. Phys. Solids, 6, 1-8.
85. Hill, R. (1958), "A general theory of uniqueness and stability in elastic-plastic solids", J. Mech. Phys. Solids, 6, 236-249.
86. Hill, R. (1959), "Some basic principles in the mechanics of solids without a natural time", J. Mech. Phys. Solids, 7 , 209-225.
87. Hill, R. (1961), "Bifurcation and uniqueness in non-linear mechanics of continua", In: Problems of Continuum Mechanics, N. I. Muskhelishvili Anniversary Volume, pp. 155-164, SIAM, Philadelphia.
88. Hill, R. (1962), "Acceleration waves in solids", J. Mech. Phys. Solids, 10, 1-16.
89. Hill, R. (1962), "Uniqueness criteria and extremum principles in self-adjoint problems of continuum mechanics", J. Mech. Phys. Solids, 10, 185-194.
90. Hill, R. (1966), "Generalized constitutive relations for incremental deformation of metal crystals by multislip", J. Mech. Phys. Solids, 14, 95-102.
91. Hill, R. (1967), "On the classical constitutive laws for elastic/plastic solids", In: Recent Progress in Applied Mechanics, The Folke Odkvist Volume (B. Broberg et al. Eds.), pp. 241-249, Almqvist & Wiksell, Stockholm.
92. Hill, R. (1967), "The essential structure of constitutive laws for metal composites and polycrystals", J. Mech. Phys. Solids, 15, 79-95.
93. Hill, R. (1967), "Eigenmodal deformations in elastic/plastic continua", J. Mech. Phys. Soids, 15, 371-386.
94. Hill, R. (1968), "On consitutive inequalities for simple materials", J. Mech. Phys. Solids, 16, 229-242, 315-322.
95. Hill, R. (1970), "Constitutive inequalities for isotropic elastic solids under finite strain", Proc. Roy. Soc. Lond., A 314, 457-472.
96. Hill, R. (1978), "Aspects of invariance in solids mechanics", Advances in Applied Mechanics, Vol. 18, pp. 1-75, Acad. Press, New York.
97. Hill, R. (1979), "On the theory of plane strain in finitely deformed compressible materials", Math. Proc. Camb. Phil. Soc., 86, 161-178.
98. Hill, R. (1983), "On intrinsic eigenstates in plasticity with generalized variables", Math. Proc. Camb. Phil. Soc., 93, 177-189.
99. Hill, R. (1988), "Path sensitivity of material response at intrinsic eigenstates in classical plasticity", Math. Proc. Camb. Phil. Soc., 103, 371-381.
100. Hill, R. (1991), "A theoretical perspective on in-plane forming of sheet metal", J. Mech. Phys. Solids, 39, 295-307.
101. Hill, R. and Hutchinson, J.W. (1975), "Bifurcation phenomena in the plane tension test", J. Mech. Phys. Solids, 23, 239-264.
102. Hill, R. and Hutchinson, J.W. (1992), "Differential hardening in sheet metal under biaxial loading: a theoretical framework", ASME J. Appl. Mech., 59, S1-S9.
103. Hill, R. and Rice, J.R. (1972), "Constitutive analysis of elastic- plastic crystals at arbitrary strain", J. Mech. Phys. Solids, 20, 401-413.
104. Hill, R. and Sewell, M.J. (1960), "A general theory of inelastic column failure - I", J. Mech. Phys. Solids, 8, 105-111.
105. Hill, R. and Sewell, M.J. (1960), "A general theory of inelastic column failure - II", J. Mech. Phys. Solids, 8, 112-118.
106. Horii, H. and Nemat-Nasser, S. (1982), "Instability of a half-space with frictional materials", ZAMP 33, 1-16.
107. Hove, L. van (1947), "Sur l'extension de la condition de Legendre du calcul des variations aux intégrales multiples à plusieurs fonctions inconnues", Proc. Kon. Ned. Acad. Wet., 50, 18-23.
108. Hutchinson, J.W. (1970), "Elastic-plastic behaviour of polycrystalline metals and composites", Proc. Roy. Soc. Lond., A 319, 247-272.
109. Hutchinson, J.W. (1973), "Post-bifurcation behavior in the plastic range", J. Mech. Phys. Solids, 21, 163-190.
110. Hutchinson, J.W. (1973), "Imperfection sensitivity in the plastic range", J. Mech. Phys. Solids, 21, 191-204.
111. Hutchinson, J.W. (1974), "Plastic buckling", Advances in Applied Mechanics, Vol. 14, pp. 67-144, Acad. Press, New York.
112. Hutchinson, J.W. and Budiansky, B. (1976), "Analytical and numerical study of the effects of initial imperfections on the inelastic buckling of a cruciform column", In: Buckling of Structures (B. Budiansky, Ed.), pp.98-105, Springer, Berlin.
113. Hutchinson, J.W. and Miles, J.P. (1974), "Bifurcation analysis of the onset of necking in an elastic/plastic cylinder under uniaxial tension", J. Mech. Phys. Solids, 22, 61-71.
114. Hutchinson, J.W. and Neale, K.W. (1978), "Sheet necking - II: Time-independent behavior", Mechanics of Sheet Metal Forming, (D.P. Koistinen and N.M. Wang, Eds.), pp. 127-150. Plenum, New York - London.
115. Hutchinson, J.W., Neale, K.W. and Needleman, A. (1978), "Sheet necking - I. Validity of plane stress assumptions of the long-wavelength approximation", Mechanics of Sheet Metal Forming, (D.P. Koistinen and N.M. Wang, Eds.), pp. 111-126, Plenum, New York - London.
116. Hutchinson, J.W. and Tvergaard, V. (1980), "Surface instabilities on statically strained plastic solids", Int. J. Mech. Sci., 22, 339-354.
117. Hutchinson, J.W. and Tvergaard, V. (1981), "Shear band formation in plane strain", Int. J. Solids Structures, 17, 451-470.
118. Iwakuma, T. and Nemat-Nasser, S. (1982), "An analytical estimate of shear band initiation in a necked bar", Int. J. Solids Structures, 18, 69-83.
119. Kitagawa, H. and Matsushita, H. (1987), "Flow localization in elastic-plastic material developing from stress-free surface", Int. J. Solids Structures, 23, 351-368.
120. Kleiber, M. (1984), "Numerical study of necking-type bifurcations in void-containing elastic-plastic materials", Int. J. Solids Structures, 20, 191-210.
121. Kleiber, M. (1986), "On plastic localization and failure in plane strain and round void containing tensile bars", Int. J. Plasticity, 2, 205-221.
122. Kleiber, M. (1993), "Shape and non-shape structural sensitivity analysis for problems with any material and kinematic non-linearity", Comp. Meth. Appl. Mech. Engng., 108, 73-97.
123. Klushnikov, V.D. (1959), "On a possible way of constructing the plastic deformation laws (in Russian)", Prikl. Mat. Mekh., 23, 282-291.
124. Klushnikov, V.D. (1959), "New concepts in plasticity and the deformation theory (in Russian)", Prikl. Mat. Mekh., 23, 722-731.
125. Klushnikov, V.D. (1980), Stability of Elastic-Plastic Systems (in Russian), Nauka, Moscow.
126. Koiter, W.T. (1953), "Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface", Quart. Appl. Math., 11, 350-353.
127. Kolymbas, D. (1981), "Bifurcation analysis for sand samples with a non-linear constitutive equation", Ing.-Archiv, 50, 131-140.
128. Kolymbas, D. (1987), "A novel constitutive law for soils", In: Constitutive Laws for Engineering Materials (S.C. Desai et al., Eds.), pp. 319-326, Elsevier, New York.
129. Kolymbas, D. (1991), "An outline of hypoplasticity", Arch. Appl. Mech., 61, 143-151.
130. Kolymbas, D. and Rombach, G. (1989), "Shear band formation in generalized hypoplasticity", Ing.-Archiv, 59, 177-186.
131. Larsson, M., Needleman, A., Tvergaard, V. and Storåkers, B. (1982), "Instability and failure of internally pressurized ductile metal cylinders", J. Mech. Phys. Solids, 30, 121-154.
132. Larsson, R., Runesson, K. and Akesson, M. (1995), "Embedded localization band based on regularized strong discontinuity", In: Computational Plasticity: Fundamentals and Applications (D.R.J. Owen and E. Oñate, Eds.), Vol. I, pp. 599-610, Pineridge Press, Swansea.
133. Larsson, R., Runesson, K. and Ottosen, N.S. (1993), "Discontinuous displacement approximation for capturing plastic localization", Int. J. Num. Meth. Engng., 36, 2087-2105.
134. Larsson, R., Runesson, K. and Sture, S. (1991), "Numerical simulation of localized plastic deformation", Arch. Appl. Mech., 66, 305-317.
135. Leblond, J.B., Perrin, G. and Devaux, J. (1994), "Bifurcation effects in ductile metals with nonlocal damage", ASME J. Appl. Mech., 61, 236-242.
136. Leger, A. and Potier-Ferry, M. (1993), "Elastic-plastic post-buckling from a heterogeneous state", J. Mech. Phys. Solids, 41, 783-807.
137. Leroy, Y.M. and Molinari, A. (1993), "Spatial patterns and size effects in shear zones: a hyperelastic model with higher-order gradients", J. Mech. Phys. Solids, 41, 631-663.
138. Leroy, Y. and Ortiz, M. (1990), "Finite element analysis of strain localization in frictional solids", Int. J. Numer Anal. Methods Geomech., 14, 93-124.
139. Lian, J., Barlat, F. and Baudelet, B. (1989), "Plastic behaviour and stretchability of sheet metals. Part II: Effect of yield surface shape on sheet forming limit", Int. J. Plasticity, 5, 131-147.
140. Lin, T.H. (1971), "Physical theory of plasticity", Advances in Applied Mechanics, Vol. 11, pp. 255-311, Acad. Press, New York.
141. Loret, B. (1987), "Non-linéarité incrémentale et localisation des déformations: quelque remarques", J. Méc. Théor. Appl., 6, 423-459.
142. Loret, B. (1992), "Does deviation from deviatoric associativity lead to the onset of flutter instability?", J. Mech. Phys. Solids, 40, 1363-1375.
143. Loret, B., Harireche, O. (1991), "Acceleration waves, flutter instabilities and stationary discontinuities in inelastic porous media", J. Mech. Phys. Solids, 39, 569-606.
144. Loret, B., Martins, J.A.C. and Simões, F.M.F. (1995), "Surface boundary conditions trigger flutter instability in non-associative elastic-plastic solids", Int. J. Solids Structures, 32, 2155-2190.
145. Loret, B., Prevost, J.H. and Harireche, O. (1990), "Loss of hyperbolicity in elastic-plastic solids with deviatoric associativity", Eur. J. Mech. A/Solids, 9, 225-231.
146. Maier, G. and Hueckel, T. (1979), "Non-associated and coupled flow rules of elastoplasticity for rock-like materials", Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 16, 77-92.
147. Mandel, J. (1965), "Generalisation de la théorie de plasticité de W.T. Koiter", Int. J. Solids Structures, 1, 273-295.
148. Mandel, J. (1966), "Conditions de stabilité et postulat de Drucker", Rheology and Soil Mechanics (J. Kravtchenko, Ed.), pp.58-67, Springer, Berlin.
149. Marciniak, Z. (1965), "Stability of plastic shells under tension with kinematic boundary conditions", Arch. Mech. Stos., 17, 577-592.
150. Marciniak, Z. and Kuczyński, K. (1967), "Limit strains in the processes of stretch-forming sheet metal", Int. J. Mech. Sci , 9, 609-620.
151. Marciniak, Z. and Kuczyński, K. and Pokora, T. (1973), "Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension", Int. J. Mech. Sci., 15, 789-805.
152. Mear, M.E. and Hutchinson, J.W. (1985), "Influence of yield surface curvature on flow localization in dilatant plasticity", Mech. Mater., 4, 395-407.
153. McMeeking, R.M. and Rice, J.R. (1975), "Finite-element formulations for problems of large elastic-plastic deformation", Int. J. Solids Structures, 11, 601-616.
154. Miles, J.P. (1969), "Bifurcation in rigid-plastic materials under spherically symmetric loading conditions", J. Mech. Phys. Solids, 17, 303-313.
155. Miles, J.P. (1973), "Fluid-pressure eigenstates and bifurcation in tension specimens under lateral pressure", J. Mech. Phys. Solids, 21, 145-162.
156. Miles, J.P. (1975), "The initiation of necking in rectangular elastic/plastic specimens under uniaxial and biaxial tension", J. Mech. Phys. Solids, 23, 197-213.
157. Mróz, Z. (1963), "Non-associated flow laws in plasticity", J. Mécanique, 2, 21-42.
158. Mróz, Z. (1966), "On forms of constitutive laws for elastic-plastic solids", Arch. Mech. Stos., 18, 1-35.
159. Mühlhaus, H.B. (1986), "Sherfugenanalyse bei granularem Material im Rahmen der Cosserat-Theorie", Ing.-Archiv, 56, 389-399.
160. Mühlhaus, H.B. (1989), "Application of Cosserat theory in numerical simulations of limit load problems", Ing.-Archiv, 59, 124-137.
161. Mühlhaus, H.B. and Aifantis, E.C. (1991), "A variational principle for gradient plasticity", Int. J. Solids Structures, 28, 845-857.
162. Mühlhaus, H.B. and Vardoulakis, I. (1987), "The thickness of shear bands in granular materials", Géotechnique, 37, 271-283.
163. Nacar, A., Needleman, A. and Ortiz, M. (1989), "A finite element method for analyzing localization in rate dependent solids at finite strains", Comp. Meth. Appl. Mech. Engng., 73, 235-258.
164. Needleman, A. (1972), "A numerical study of necking in circular cylindrical bars", J. Mech. Phys. Solids, 20, 111-127.
165. Needleman, A. (1973), "A numerical study of uniaxial compression in circular elastic-plastic columns", Int. J. Solids Structures, 9, 981-998.
166. Needleman, A. (1975), "Bifurcation of elastic-plastic spherical shells subject to internal pressure", J. Mech. Phys. Solids, 23, 357-367.
167. Needleman, A. (1975), "Postbifurcation behavior and imperfection sensitivity of elastic-plastic circular plates", Int. J. Mech. Sci., 17, 1-13.
168. Needleman, A. (1976), "Necking of pressurized spherical membranes", J. Mech. Phys. Solids, 24, 339-359.
169. Needleman, A. (1979), "Non-normality and bifurcation in plane strain tension and compression", J. Mech. Phys. Solids, 27, 231-254.
170. Needleman, A. and Ortiz, M. (1991), "Effect of boundaries and interfaces on shear band localization", Int. J. Solids Structures, 28, 859-877.
171. Needleman, A. and Rice, J.R. (1978), "Limits to ductility set by plastic flow localization", Mechanics of Sheet Metal Forming (D.P. Koistinen, N.-M. Wang, Eds.), pp. 237-264, Plenum, New York.
172. Needleman, A. and Tvergaard, V. (1976), "An analysis of the imperfection sensitivity of square elastic-plastic plates under axial compression", Int. J. Solids Structures, 12, 185-201.
173. Needleman, A. and Tvergaard, V. (1977), "Necking of biaxially stretched elastic-plastic circular plates", J. Mech. Phys. Solids, 25, 159-183.
174. Needleman, A. and Tvergaard, V. (1982), "Aspects of plastic postbuckling behavior", In: Mechanics of Solids, The Rodney Hill 60-th Anniversary Volume (H.G. Hopkins and M.J. Sewell, Eds.), pp. 453-498, Pergamon Press, Oxford.
175. Needleman, A. and Tvergaard, V. (1984), "Finite element analysis of localization in plasticity", In: Finite Elements: Special Problems in Solid Mechanics (J.T. Oden and G.F. Carey, Eds.), Vol. V, pp. 94-157, Prentice-Hall, Englewood Cliffs.
176. Needleman, A. and Tvergaard, V. (1992), "Analyses of plastic flow localization in metals", Appl. Mech. Rev., 45, no 3, part 2, S3-S18.
177. Nguyen, Q.S. (1984), "Bifurcation et stabilité des systèmes irréversibles obéissant au principe de dissipation maximale", J. Méc. Theor. Appl., 3, 41-61.
178. Nguyen, Q.S. (1987), "Bifurcation and post-bifurcation analysis in plasticity and brittle fracture", J. Mech. Phys. Solids, 35, 303-324.
179. Nguyen, Q.S. (1990), "Stabilité et bifurcation des systèmes dissipatifs standarts à comportement indépendant du temps physique", C. R. Acad. Sci. Paris, t. 310, Série II, 1375-1380.
180. Nguyen, Q.S. (1993), "Bifurcation and stability of time-independent standard dissipative systems", In: CISM Lecture Notes No. 327 (Q.S. Nguyen, Ed.), pp. 45-94, Springer, Wien - New York.
181. Nguyen, Q.S. (1994), "Bifurcation and stability in dissipative media (plasticity, friction, fracture)", Appl. Mech. Rev., 47, no 1, Part 1, 1-31.
182. Nguyen, Q.S. and Radenkovic, D. (1975), "Stability of equilibrium in elastic plastic solids", Lecture Notes in Mathematics, Vol. 503, pp. 403-414, Springer, Berlin.
183. Nguyen, Q.S. and Triantafyllidis, N. (1989), "Plastic bifurcation and postbifurcation analysis for generalized standard continua", J. Mech. Phys. Solids, 37, 545-566.
184. Norris, D.M., Moran, B., Soudder, J.K. and Quiñones, D.F. (1978), "A computer simulation of the tension test", J. Mech. Phys. Solids, 26, 1-19.
185. Olivier, J. (1995), "Continuum modelling of strong discontinuities in solid mechanics", In: Computational Plasticity: Fundamentals and Applications (D.R.J. Owen and E. Oñate, Eds.) Vol. I, pp. 455-479, Pineridge Press, Swansea.
186. Onat, E.T. and Drucker, D.C. (1953), "Inelastic instability and incremental theories of plasticity", J. Aero. Sci., 20, 181-186.
187. Ortiz, M., Leroy, Y. and Needleman, A. (1987), "A finite element method for localized failure analysis", Cornp. Meth. Appl. Mech. Engng., 61, 189-214.
188. Ortiz, M. and Quigley, J.J. (1991), "Adaptive mesh refinement in strain localization problems", Comp. Meth. Appl. Mech. Engng., 90, 781-804.
189. Ottosen, N.S. and Runesson, K. (1991), "Properties of discontinuous bifurcation solutions in elasto-plasticity", Int. J. Solids Structures, 27, 401-421.
190. Ottosen, N.S. and Runesson, K. (1991), "Acceleration waves in elasto-plasticity", Int. J. Solids Structures, 28, 135-159.
191. Papanastasiou, P.C. and Vardoulakis, I.G. (1992), "Numerical treatment of progressive localization in relation to borehole stability", Int. J. Numer Anal. Methods Geomech., 16, 389-424.
192. Parmar, A. and Mellor, P.B. (1978), "Predictions of limit strains in sheet metal using a more general yield criterion", Int. J. Mech. Sci., 20, 385-391.
193. Pastor, M., Peraire, J. and Zienkiewicz, O.C. (1991), "Adaptive remeshing for shear band computations", Arch. Appl. Mech., 61, 30-39.
194. Peirce, D. (1983), "Shear band bifurcations in ductile single crystals", J. Mech. Phys. Solids, 31, 133-153.
195. Peirce, D., Asaro, R.J. and Needleman, A. (1982), "An analysis of nonuniform and localized deformation in ductile single crystals", Acta Metall., 30, 1087-1119.
196. Perić, D., Yu, J. and Owen, D.R.J. (1994), "On error estimates and adaptivity in elastoplastic solids: applications to the numerical simulation of strain localization in classical and Cosserat continua", Int. J. Num. Meth. Engng., 37, 1351-1379.
197. Perrin, G. and Leblond, J.B. (1993), "Rudnicki and Rice's analysis of strain localization revisited", ASME J. Appl. Mech., 60, 842-846.
198. Petryk, H. (1982), "A consistent energy approach to defining stability of plastic deformation processes", In: Stability in the Mechanics of Continua, Proc. IUTAM Symp. Nümbrecht 1981 (F.H. Schroeder, Ed.), pp. 262-272, Springer, Berlin - Heidelberg.
199. Petryk, H. (1985), "On stability and symmetry conditions in time-independent plasticity", Arch. Mech., 37, 503-520, 1985.
200. Petryk, H. (1985), "On energy criteria of plastic instability", In: Plastic Instability, Proc. Considère Memorial, pp. 215-226, Ecole Nat. Ponts Chauss., Paris.
201. Petryk, H. (1989), "On constitutive inequalities and bifurcation in elastic-plastic solids with a yield-surface vertex", J. Mech. Phys. Solids, 37, 265-291.
202. Petryk, H. (1991), "The energy criteria of instability in time-independent inelastic solids", Arch. Mech., 43, 519-545.
203. Petryk, H. (1992), "On stability of time-independent materials at finite strain", In: Finite Inelastic Deformations - Theory and Applications (D. Besdo and E. Stein, Eds.), pp. 189-196, Springer-Verlag, Berlin Heidelberg.
204. Petryk, H. (1992), "Material instability and strain-rate discontinuities in incrementally nonlinear continua", J. Mech. Phys. Solids, 40, 1227-1250.
205. Petryk, H. (1993), "Theory of bifurcation and instability in time-independent plasticity", In: CISM Lecture Notes No. 327 (Q.S. Nguyen, Ed.), pp. 95-152, Springer, Wien - New York.
206. Petryk, H. (1993), "Stability and constitutive inequalities in plasticity", CISM Lecture Notes No. 336 (W. Muschik, Ed.), pp. 259-329, Springer, Wien - New York.
207. Petryk, H. (1995), "Thermodynamic stability of equilibrium in plasticity", J. Non-Equil. Thermodyn., 20, 132-149.
208. Petryk, H. and Thermann, K. (1985), "Second-order bifurcation in elastic-plastic solids", J. Mech. Phys. Solids, 33, 577-593.
209. Petryk, H. and Thermann, K. (1992), "On discretized plasticity problems with bifurcations", Int. J. Solids Structures, 29, 745-765.
210. Petryk, H. and Thermann, K. (1992), "On post-bifurcation paths in plastic deformation processes", In: Computational Plasticity: Fundamentals and applications (D.R.J. Owen et al., Eds.), Vol. I, 593-604, Pineridge Press, Swansea.
211. Petryk, H. and Thermann, K. (1995), "On plastic strain localisation in the non-elliptic range under plane stress", In: Computational Plasticity: Fundamentals and Applications (D.R.J. Owen and E. Oñate, Eds.), Vol. I, pp. 647-658, Pineridge Press, Swansea.
212. Petryk, H. and Thermann, K. (1996), "Post-critical plastic deformation of biaxially stretched sheets", Int. J. Solids Structures, 33, 689-705.
213. Pietruszczak, St. and Mróz, Z. (1981), "Finite element analysis of deformation of strain-softening materials", Int. J. Num. Meth. Engng., 17, 327-334.
214. Pijaudier-Cabot, G. and Bažant, Z.P. (1987), "Nonlocal damage theory", ASCE J. Eng. Mech., 113, 1512-1533.
215. Pijaudier-Cabot, G. and Benallal, A. (1993), "Strain localization and bifurcation in a nonlocal continuum", Int. J. Solids Structures, 30, 1761-1775.
216. Potier-Ferry, M. (1985), "Towards a catastrophe theory for the mechanics of plasticity and fracture", Int. J. Engng. Sci., 23, 821-837.
217. Prager, W. (1954), "Three dimensional plastic flow under uniform stress", Rev. Fac. Sci. Univ. Istanbul, 19, 23-26.
218. Raniecki, B. (1979), "Uniqueness criteria in solids with non-associated plastic flow laws at finite deformations", Bull. Acad. Polon. Sci., Sér. Sci. Techn., 27, 391-399.
219. Raniecki, B. and Bruhns, O.T. (1985), "Bounds to bifurcation stresses in solids with non-associated plastic flow law at finite strain", J. Mech. Phys. Solids, 29, 153-172.
220. Rasmussen, S.N. (1982), "Effect of rounded vertices in the yield surface on localized necking in biaxially stretched sheets", Int. J. Mech. Sci., 12, 729-739.
221. Rice, J.R. (1977), "The localization of plastic deformation", In: Theoretical and Applied Mechanics (W.T. Koiter, Ed.), pp. 207-220, North- Holland, Amsterdam.
222. Rice, J.R. and Rudnicki, J.W. (1980), "A note on some features of the theory of localization of deformation", Int. J. Solids Structures, 16, 597-605.
223. Riks, E. (1979), "An incremental approach to the solution of snapping and buckling problems", Int. J. Solids Structures, 15, 529-551.
224. Rosochowski, A. (1985), "Shear band localization in ductile porous materials", Plastic Instability, Proc. Considère Memorial, pp. 135-146, Ecole Nat. Pouts Chauss. Press, Paris.
225. Rudnicki, J.W. and Rice, J.R. (1975), "Conditions for the localization of deformation in pressure-sensitive dilatant materials", J. Mech. Phys. Solids, 23, 371-394.
226. Ryzhak, E.I. (1987), "Necessity of Hadamard conditions for stability of elastic-plastic solids (in Russian)", Mekh. Tv. Tela, No. 4, 101-104.
227. Ryzhak, E.I. (1993), "On stable deformation of 'unstable' materials in a rigid triaxial testing machine", J. Mech. Phys. Solids, 41, 1345-1356.
228. Saje, M., Pan, J. and Needleman, A. (1982), "Void nucleation effects on shear localization in porous plastic solids", Int. J. Fracture, 19, 163-182.
229. Sanders, J.L. (1954), "Plastic stress-strain relations based on linear loading functions", Proc. 2nd U.S. Nat. Congr. Appl. Mech., pp. 455-460, Univ. of Michigan, Ann Arbor.
230. Sandler, I.S. and Rubin, D. (1987), "The consequences of non-associated plasticity in dynamic problems", In: Constitutive Laws for Engineering Materials, (S.C. Desai et al., Eds.) pp. 345-352, Elsevier, New York.
231. Schreyer, H.L. (1990), "Analytical solutions for nonlinear strain-gradient softening and localization", ASME J. Appl. Mech., 57, 522-528.
232. Schreyer, H.L. and Chen, Z. (1986), "One-dimensional softening with localization", ASME J. Appl. Mech., 53, 791-797.
233. Sewell, M.J. (1963), "A general theory of elastic and inelastic plate failure - I", J. Mech. Phys. Solids, 11, 377-393.
234. Sewell, M.J. (1967), "On configuration-dependent loading", Arch. Rat. Mech. Anal., 23, 327-351.
235. Sewell, M.J. (1972), "A survey of plastic buckling", In: Stability (H.H.E. Leipholz, Ed.), pp. 85-197, Univ. of Waterloo Press, Ontario.
236. Sewell, M.J. (1973), "A yield surface corner lowers the buckling stress of an elastic-plastic plate under compression", J. Mech. Phys. Solids, 21, 19-45.
237. Shanley, F.R. (1946), "The column paradox", J. Aero. Sci., 13, 678.
238. Shanley, F.R. (1947), "Inelastic column theory", J. Aero. Sci. 14, 261-267.
239. Simo, J.C. (1991), "Nonlinear stability of the time-discrete variational problem of evolution in nonlinear heat conduction, plasticity and viscoplasticity", Comp. Meth. Appl. Mech. Engng., 88, 111-131.
240. Simo, J.C., Olivier, J. and Armero, F. (1993), "An analysis of strong discontinuities induced by strain softening in rate-independent inelastic solids", Comput. Mech., 12, 277-296.
241. Sowerby, R. and Duncan, J.L. (1971), "Failure in sheet metal in biaxial tension", Int. J. Mech. Sci., 13, 217-229.
242. Steif, P.S. (1985), "Growth of interface imperfections in layered plastic solids", In: Plastic Instability, Proc. Considère Memorial, pp. 175-183, Ecole Nat. Ponts Chauss., Paris.
243. Stein, E., Wagner, W. and Wriggers, P. (1990), "Numerical procedures for the computation of singular points and postcritical branches", In: Inelastic Solids and Structures, Antoni Sawczuk Memorial Volume (M. Kleiber and J.A. König, Eds.), pp. 145-164, Pineridge Press, Swansea.
244. Steinmann, P., Miehe, C. Stein, E. (1994), "On the localization analysis of orthotropic Hill type elastoplastic solids", J. Mech. Phys. Solids, 42, 1969-1994.
245. Storåkers, B. (1975), "On uniqueness and stability of elastic-plastic deformation", Arch. Mech., 27, 821-839.
246. Storåkers, B. (1977), "On uniqueness and stability under configuration-dependent loading of solids with or without a natural time", J. Mech. Phys. Solids, 25, 269-287.
247. Stören, S. and Rice, J.R. (1975), "Localized necking in thin sheets", J. Mech. Phys. Solids, 23, 421-441.
248. Strifords, H. and Storåkers, B. (1973), "Uniqueness and stability of rigid-plastic spherical shells subjected to finite deformation under hydrostatic pressure", J. Mech. Phys. Solids, 21, 125-134.
249. Suo, Z., Ortiz, M. and Needleman, A. (1992), "Stability of solids with interfaces", J. Mech. Phys. Solids, 40, 613-640.
250. Tejchman, J. and Wu, W. (1993), "Numerical study on patterning of shear bands in a Cosserat continuum", Acta Mech., 99, 61-74.
251. Thomas, T.Y. (1961), Plastic Flow and Fracture in Solids, Acad. Press, New York.
252. Tomita, Y. (1994), "Simulation of plastic instabilities in solid mechanics", Appl. Mech. Rev., 47, no 6, Part 1, 171-205.
253. Tomita, Y. and Shindo, A. (1985), "Bifurcation behaviour of thin square elastic-plastic orthotropic plates subjected to diagonal tension", In: Plastic Instability, Proc. Considère Memorial, pp. 203-213, Ecole Nat. Ponts Chauss., Paris.
254. Tomita, Y. and Shindo, A. (1988), "Onset and growth of wrinkles in thin square plates subjected to diagonal tension", Int. J. Mech. Sci., 30, 921-931.
255. Tomita, Y, Shindo, A., Kim, Y.S. and Michiura, K. (1986), "Deformation behaviour of elastic-plastic tubes under external pressure and axial load", Int. J. Mech. Sci., 28, 263-274.
256. Tomita, Y, Shindo, A. and Kitagawa, H. (1981), "Bifurcation and post-bifurcation behaviour of internally pressurized elastic-plastic circular tubes under plane strain conditions", Int. J. Mech. Sci., 23, 723-732.
257. Tomita, Y., Shindo, A. and Nagai, M. (1984), "Axisymmetric deformation of circular elastic-plastic tubes under axial tension and internal pressure", Int. J. Mech. Sci., 26, 437-444.
258. Triantafyllidis, N. (1980), "Bifurcation phenomena in pure bending", J. Mech. Phys. Solids, 28, 221-245.
259. Triantafyllidis, N. (1983), "On the bifurcation and postbifurcation analysis of elastic-plastic solids under general prebifurcation conditions", J. Mech. Phys. Solids, 31, 499-510.
260. Triantafyllidis, N. (1985), "The localization of deformation in finitely strained shells", In: Plastic Instability, Proc. Considère Memorial, pp. 115-124, Ecole Nat. Ponts Chauss., Paris.
261. Triantafyllidis, N. and Aifantis, E.C. (1986), "A gradient approach to localization of deformation - I. Hyperelastic materials", J. Elasticity, 16, 225-238.
262. Triantafyllidis, N., Needleman, A. and Tvergaard, V. (1982), "On the development of shear bands in pure bending", Int. J. Solids Structures, 18, 121-138.
263. Tsay, J.J. and Arora, J.S. (1990), "Nonlinear structural design sensitivity analysis in nonlinear structural mechanics. Part I: General theory", Comp. Meth. Appl. Mech. Engng., 81, 183-208.
264. Tvergaard, V. (1976), "Effect of thickness inhomogeneities in internally pressurized elastic-plastic spherical shells", J. Mech. Phys. Solids, 24, 291-304.
265. Tvergaard, V. (1977), "Buckling behavior of plate and shell structures", Theoretical and Applied Mechanics (W.T. Koiter, Ed.), pp. 233-247, North-Holland, Amsterdam.
266. Tvergaard, V. (1977), "Buckling of elastic-plastic cylindrical panel under axial compression", Int. J. Solids Structures, 13, 957-970.
267. Tvergaard, V. (1978), "On the burst strength and necking behaviour of rotating disks", Int. J. Mech. Sci., 20, 109-120.
268. Tvergaard, V. (1978), "Effect of kinematic hardening on localized necking in biaxially stretched sheets", Int. J. Mech. Sci., 20, 651-658.
269. Tvergaard, V. (1980), "Bifurcation and imperfection-sensitivity at necking instabilities", ZAMM, 60, T26-T34.
270. Tvergaard, V. (1982), "Ductile fracture by cavity nucleation between larger voids", J. Mech. Phys. Solids, 30, 265-286.
271. Tvergaard, V. (1982), "Influence of void nucleation on ductile shear fracture at a free surface", J. Mech. Phys. Solids, 30, 399-425.
272. Tvergaard, V. (1987), "Effect of yield surface curvature and void nucleation on plastic flow localization", J. Mech. Phys. Solids, 35, 43-60.
273. Tvergaard, V. (1990), "Bifurcation in elastic-plastic tubes under internal pressure", Eur. J. Mech. A/Solids, 9, 21-35.
274. Tvergaard, V. (1993), "Necking in tensile bars with rectangular cross-section", Comp. Meth. Appl. Mech. Engng, 103, 273-290.
275. Tvergaard, V. and van der Giessen, E. (1991), "Effect of plastic spin on localization predictions for a porous ductile material", J. Mech. Phys. Solids, 39, 763-781.
276. Tvergaard, V. and Needleman, A. (1975), "On the buckling of elastic-plastic columns with asymmetric cross-sections", Int. J. Mech. Sci., 17, 419-424.
277. Tvergaard, V., Needleman, A. and Lo, K.K. (1981), "Flow localization in plane strain tensile test", J. Mech. Phys. Solids, 29, 115-142.
278. Vardoulakis, I. (1980), "Shear band inclination and shear modulus of sand in biaxial tests", Int. J. Num. Anal. Methods Geomech., 4, 103-119.
279. Vardoulakis, I. (1989), "Shear banding and liquefaction in granular materials on the basis of a Cosserat continuum theory", Ing.-Archiv, 59, 106-113.
280. Vardoulakis, I. and Aifantis, E.C. (1991), "A gradient flow theory of plasticity for granular materials", Acta Mech., 87, 197-217.
281. Vardoulakis, I. and Frantziskonis, G. (1992), "Micro-structure in kinematic-hardening plasticity", Eur. J. Mech. A/Solids, 11, 467-486.
282. Vardoulakis, I. and Graf, B. (1985), "Calibration of constitutive models for granular materials using data from biaxial experiments", Géotechnique, 35, 299-317.
283. Venneer, P.A. and Brinkgreve, R.B.J. (1994), "A new effective non-local strain-measure for softening plasticity", In: Localisation and Bifurcation Theory for Soils and Rocks (R. Chambon, J. Desrues and I. Vardoulakis, Eds.), pp. 89-100, Balkema, Rotterdam.
284. Vidal, A.A. and Haber, R.B. (1993), "Design sensitivity analysis for rate-independent elastoplasticity", Comp. Meth. Appl. Mech. Engng., 107, 393-431.
285. Wriggers, P. and Simo, J.C. (1990), "A general procedure for the direct computation of turning and bifurcation points", Int. J. Num. Meth. Engng., 30, 155-176.
286. Yamamoto, H. (1978), "Conditions for shear localization in the ductile fracture of void-containing materials" Int. J. Fracture, 14, 347-365.
287. Young, N.J.B. (1976), "Bifurcation phenomena in the plane compression test", J. Mech. Phys. Solids, 24, 77-91.
288. Zbib, H.M. and Aifantis, E.C. (1988), "On the localization and postlocalization behavior of plastic deformation", I, II and III. Res. Mechanica, 23, 261-305.
289. Zhou, Z. and Murray, D.W. (1994), "An incremental solution technique for unstable equilibrium paths of shell structures", Computers & Structures, 55, 749-759.
290. Zubelewicz, A. and Mróz, Z. (1983), "Numerical simulation of rock burst process treated as problems of dynamic stability", Rock Mechanics and Rock Engineering, 16, 253-274.