Differences in patellar tracking and knee kinematics among three different total knee designs

Clinical Orthopaedics and Related Research

Volumn 345, Issue , 1997, Pages 87-98

  Chew, Jeffrey T H ^a   Stewart, Nathaniel J ^a   Hanssen, Arlen D ^a   Luo, Zong Ping ^a   Rand, James A ^a   An, Kai Nan ^a  

^a MAYO CLINIC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONFERENCE PAPER; GEOMETRY; HUMAN; HUMAN TISSUE; IMPLANT; KINETICS; PATELLA; PRIORITY JOURNAL; REOPERATION; SURGICAL ANATOMY; TOTAL KNEE REPLACEMENT;

EID: 0031468408     PISSN: 0009921X     EISSN: 15281132     Source Type: Journal    
DOI: 10.1097/00003086-199712000-00013     Document Type: Conference Paper

References (46)

1. Ahmed AM, Shi S, Hyder A, et al: The effect of quadriceps tension characteristics on the patellar tracking pattern. Trans Orthop Res Soc 13:280, 1988.
2. Anouchi YS, Whiteside LA, Kaiser AD, Milliano M: The effects of axial rotational alignment of the femoral component on knee stability and patellar tracking in total knee arthroplasty demonstrated on autopsy specimens. Clin Orthop 287:170-177, 1993.
3. Bayley JC, Scott RD, Ewald FC, Holmes Jr GB: Failure of the metal-backed patellar component after total knee replacement. J Bone Joint Surg 70A:668-674, 1988.
4. Bindelglass DF, Cohen JL, Dorr LD: Patellar tilt and subluxation in total knee arthroplasty. Relationship to pain, fixation, and design. Clin Orthop 286:103-109, 1993.
5. Boyd Jr AD, Ewald FC, Thomas WH, Poss R, Sledge CB: Long-term complications after total knee arthroplasty with or without resurfacing of the patellar. J Bone Joint Surg 75A:674-681, 1993.
6. Briad JL, Hungerford DS: Patellofemoral instability in total knee arthroplasty. J Arthroplasty 4 (Suppl): 87-97, 1989.
7. Brick GW, Scott RD: The patellofemoral component of total knee arthroplasty. Clin Orthop 231:163-178, 1988.
8. Cepulo AJ, Srahurski TM, Moran JM, Matejczyk MB, Greenwald AS: Mechanical characteristics of patello-femoral replacements. Trans Orthop Res Soc 8:41, 1983.
9. Eijden TMGJ, Kouwenhoven E, Verburg J, Weijs WA: A mathematical model of the patellofemoral joint. J Biomech 19:219-229, 1986.
10. Ficat RP, Hungerford DS: Disorders of the Patello-Femoral Joint. Baltimore, Williams and Wilkins 1977.
11. Freeman MA, Samuelson KM, Elias SG, et al: The patellofemoral joint in total knee prostheses. Design considerations. J Arthroplasty 4 (Suppl):S69-74, 1989.
12. Gomes LSM, Bechtold JE, Gustilo RB: Patellar prosthesis positioning in total knee arthroplasty. A roentgenographic study. Clin Orthop 236:72-81, 1988.
13. Grace JN, Rand JA: Patellar instability after total knee arthroplasty. Clin Orthop 237:184-189, 1988.
14. Gunston FH, MacKenzie RI: Complications of polycentric knee arthroplasty. Clin Orthop 120:11-17, 1976.
15. Hefzy MS, Hsieh Y, Raftopoulos D, et al: The effects of tibial rotations on patello-femoral contact areas. Trans Orthop Res Soc 16:573, 1991.
16. Hirokawa S: Three dimensional mathematical model analysis of the patellofemoral joint. J Biomech 24:659-671, 1991.
17. Hoffman GO, Hagena FW: Pathomechanics of the femoropatellar joint following total knee arthroplasty. Clin Orthop 224:251-259 1987.
18. Hsu HP, Walker PS: Wear and deformation of patellar components in total knee arthroplasty. Clin Orthop 246:260-265, 1989.
19. Huberti HH, Hayes WC: Patellofemoral contact pressures. The influence of Q-angle and tendofemoral contact. J Bone Joint Surg 66A:715-724, 1984.
20. Insall JN, Lachiewicz PF, Burstein AH: The posterior stabilized condylar prosthesis: a modification of the total condylar design. Two to four-year clinical experience. J Bone Joint Surg 64A:1317-1323, 1982.
21. Jankiewicz JJ, Ranawat CS, Sculco TP, et al: A prospective randomized study of patellofemoral complications in two posterior cruciate-substituting total knee systems. Orthop Trans 18:182-183, 1994.
22. Josefchak RG, Finlay JB, Bourne RB, Rorabeck C: Cancellous bone support for patellar resurfacing. Clin Orthop 220:192-199, 1987.
23. Kim W, Rand JA, Chao EYS: Biomechanics of the Knee. In Rand JA (ed). Total Knee Arthroplasty. New York, Raven Press 9-57, 1993.
24. Laskin RS, Bucknell A: The use of metal-backed patellar prostheses in total knee arthroplasty. Clin Orthop 260:52-55, 1987.
25. Leblanc J: Patellar complications in total knee arthroplasty. Orth Rev 18:296-304, 1989.
26. Luo ZP, Hsu HC, Rand JA, An KN: Importance of soft tissue integrity on biomechanical studies of the patella after TKA. J Biomech Eng 118:130-132, 1996.
27. Lynch AF, Rorabeck CH, Bourne RB: Extensor mechanism complications following total knee arthroplasty. J Arthroplasty 2:135-140, 1987.
28. Manuouel M, Pearlman HS, Belakhlef A: Miniature implantable piezoelectric polymer transducer for in-vitro measurement of dynamic contact pressure distribution in the patellofemoral joint. Trans Orthop Res Soc 16:570, 1991.
29. Marmor L: Technique for patellar resurfacing in total knee arthroplasty. Clin Orthop 230:166-167, 1988.
30. Merkow RL, Soudry M, Insall JN: Patellar dislocation following total knee replacement. J Bone Joint Surg 67A:1321-1327, 1985.
31. Mochizuki RM, Schurman DJ: Patellar complications following total knee arthroplasty. J Bone Joint Surg 67A:879-883, 1979.
32. Nagamine R, Otani T, White SE, McCarthy DS, Whiteside LA: Patellar trackins measurement in the normal knee. J Orthop Res 13:115-122, 1995.
33. Nagamine R, White SE, McCarthy DS, Whiteside LA: Effect of rotational malposition of the femoral component on knee stability kinematics after total knee arthroplasty. J Arthroplasty 10:265-270, 1995.
34. Petersilge WJ, Oishi CS, Kaufman KR, Irby SE, Colwell CW: The effect of trochlear design on patellofemoral shear and compressive forces in total knee arthroplasty. Clin Orthop 309:124-130, 1994.
35. Rand JA: Patellar resurfacing in total knee arthroplasty. Clin Orthop 260:110-117, 1990.
36. Rand JA, Gustilo RB: Technique of patellar resurfacing in total knee arthroplasty. Tech Orthop 3:57-66, 1988.
37. Reider B, Marshall JL, Ring B: Patellar tracking. Clin Orthop 157:143-148, 1981.
38. Reithmeier E, Plitz W: A theoretical and numerical approach to optimal positioning of the patellar surface replacement in a total knee endoprosthesis. J Biomechanics 23:883-892, 1990.
39. Reuben JD, McDonald CL, Woodard PL, Hennington J: Effect of patellar thickness on patella strain following total knee arthroplasty. J Arthroplasty 6: 251-258, 1991.
40. Rhoads DD, Noble PC, Reuben JD, Tullos HS: The effect of femoral component position on the kinematics of total knee arthroplasty. Clin Orthop 286: 122-129, 1993.
41. Rosenherg AG, Andriacchi TP, Barden R, Galante JO: Patellar component failure in cementless total knee arthroplasty. Clin Orthop 236:106-114, 1988.
42. Sakai N, Luo ZP, Rand JA, An KA: The effects of tibial rotation on patellar position. The Knee 1:133-138, 1994.
43. Scott RD: Mechanisms of Failure in the Patellofemoral Compartment of Total Knee Arthroplasty: In Goldberg VM (ed). Controversies of Total Knee Arthroplasty. New York, Raven Press 1991.
44. Stulberg SD, Stulberg BN, Hamati Y, Tsao A: Failure mechanisms of metal-backed patellar components. Clin Orthop 236:88-105, 1988.
45. Van Kampen A, Huiskes R: The three dimensional tracking pattern of the human patella. J Orthop Res 8:372-382, 1990.
46. Yoshii I, Whiteside LA, Anouchi YS: The effect of patellar button placement and femoral component design on patellar tracking in total knee arthroplasty. Clin Orthop 275:211-219, 1992.