Estimation of the complete stress tensor to 8 km depth in the KTB scientific drill holes: Implications for crustal strength

Journal of Geophysical Research: Solid Earth

Volumn 102, Issue B8, 1997, Pages 18453-18475

  Brudy, M ^a   Zoback, M D ^b   Fuchs, K ^a   Rummel, F ^a,c   Baumgartner J ^d,e  

^a UNIVERSITY OF KARLSRUHE   (Germany)

^b STANFORD UNIVERSITY   (United States)

^c RUHR UNIVERSITY BOCHUM   (Germany)

^d Soc de Coop Miniere et Indust   (France)

^e SOCOMINE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CRUSTAL STRENGTH; DEEP DRILLING; HYDRAULIC FRACTURING; KTB BOREHOLE; ROCK MECHANICS; STRESS TENSOR;

GERMANY, BAVARIA, KTB SITE;

EID: 0031409822     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1029/96jb02942     Document Type: Article

References (90)

1. Angelier, J., Tectonic analysis of fault slip data sets, J. Geophys. Res., 89, 5835-5848, 1984.
2. Barton, C., and M.D. Zoback, Stress perturbations associated with active faults penetrated by boreholes: Possible evidence for near-complete stress drop and a new technique for stress magnitude measurement, J. Geophys. Res., 99, 9373-9390, 1994.
3. Barton, C.A., M.D. Zoback, and K.L. Burns, In-situ stress orientation and magnitude at the Fenton Hill geothermal site, New Mexico, determined from wellbore breakouts, Geophys. Res. Lett., 15, 467-470, 1988.
4. Barton, C.A., L.G. Tesler, and M.D. Zoback, Interactive image analysis of borehole televiewer data, in Automated Pattern Analysis in Petroleum Exploration, edited by I. Palaz and S.K. Sengupta, pp. 223-248, Springer-Verlag, New York, 1992.
5. Baumann, H., In situ stress in the German KTB pilot hole deduced from differential strain analysis, Sci. Drill., 3, 263-270, 1993.
6. Baumgärtner, J., F. Rummel, and M.D. Zoback, Hydraulic fracturing in situ stress measurements to 3 km depth in the KTB pilot hole VB, KTB Rep. 90-6a, pp. 353-399, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1990.
7. Brace, W.F., and D.L. Kohlstedt, Limits on lithospheric stress imposed by laboratory experiments, J. Geophys. Res., 85, 6248-6252, 1980.
8. Brudy, M., and M.D. Zoback, Compressive and tensile failure of boreholes arbitrarily-inclined to principal stress axes: Application to the KTB boreholes, Germany, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 1035-1038, 1993.
9. Brudy, M., K. Fuchs, and M.D. Zoback, Stress orientation profile to 6 km depth in the KTB main borehole, KTB Rep. 93-1, pp. 281-300, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1993.
10. Brudy, M., Determination of in situ stress magnitude and orientation to 9 km depth at the KTB site, Ph.D. thesis, Karlsruhe Univ., Karlsruhe, Germany, November 1995.
11. Brudy, M., M.D. Zoback, K. Huber, H. Bässler, J. Kück, and K. Fuchs, Stress orientation profile to mid-crustal depth in the KTB main borehole, KTB-Rep. 94-1, pp. 327-350, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1995.
12. Byerlee, J.D., Friction of rocks, Pure Appl. Geophys., 116, 615-629, 1978.
13. Cheatham, J.B., A new hypothesis to explain stability of borehole breakouts, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 1095-1101, 1993.
14. Clauser, C., U. Harms, E. Huenges, T. Kohl, H. Lehmann, and L. Rybach, Heat transport processes at the KTB, KTB Rep. 94-2, pp. A117-A134, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1994.
15. Clauser, C., et al., The thermal regime of the crystalline crust: Implications from the KTB, J. Geophys. Res., this issue.
16. de Wall, H., J. Duyster, G. Hirschmann, A. Kontny, S. Lich, and E. Spangenberg, Die Störungszone in 7 km Tiefe - Ursachen eines seismischen Reflektors, KTB-Report 94-3, pp. 83-96, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1994.
17. Duyster, J., H. de Wall, and G. Zulauf, 9101 m profile in the superdeep well KTB. Where are the depth-dependent gradients?, KTB Rep. 94-2, pp. A15-A24, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1994.
18. Ekstrom, M.P., C.A. Dahan, M.Y. Chen, P.M. Lloyd, and D.J. Rossi, Formation imaging with microelectrical scanning arrays, Log Anal., 28, 294-306, 1987.
19. Emmermann, R., and J. Lauterjung, The German Continental Deep Drilling Program KTB: Overview and major results, J. Geophys. Res., this issue.
20. Engeser, B., E. Huenges, W. Kessels, J. Kück, and L. Wohlgemuth, The 6000 m hydrofrac test in the KTB main borehole - design, implementation and preliminary results, KTB Rep. 93-1, pp. 301-336, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1993.
21. Gartung, E., Einaxiale Druckversuche an Gesteinsproben, Bautechnik, 56, 217-220, 1979.
22. Gephart, J.W., and D.W. Forsyth, An improved method for determining the regional stress tensor using earthquake focal mechanism data: application to the San Fernando earthquake sequence, J. Geophys. Res., 89, 9305-9320, 1984.
23. Götze, C., and B. Evans, Stress and temperature in the bending lithosphere as constrained by experimental rock mechanics, Geophys. J. R. Astron. Soc., 59, 463-478, 1979.
24. Haimson, B.C. (Ed.), Hydraulic fracturing stress measurements, special issue, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1989.
25. Haimson, B.C., Scale effects in rock stress measurements, in Scale Effects in Rock Masses, edited by P. da Cunha, pp. 89-101, A.A. Balkema, Rotterdam, Netherlands, 1990.
26. Haimson, B., and C. Fairhurst, Initiation and extension of hydraulic fractures in rocks, Soc. Pet. Eng. J., 7, 310-318, 1967.
27. Haimson, B.C., and I. Song, Laboratory study of borehole breakouts in Cordova Cream: a case of shear failure mechanism, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 1047-1056, 1993.
28. Harjes, H.-P., et al., Origin and nature of crustal reflections: Results from integrated seismic measurements at the KTB superdeep drilling site, J. Geophys. Res., this issue.
29. Hirschmann, G., On the geological interpretation of the 3-d seismic data with special regard to the information from the KTB boreholes, KTB-Report 92-5, pp. 351-373, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1992.
30. Hirschmann, G., Zur Geologie der KTB-Lokation Oberpfalz, Z. Geol. Wiss., 21, 105-116, 1993.
31. Hoskins, E.R., Field and laboratory experiments in rock mechanics, Ph.D. thesis, Austr. Nat. Univ., Canberra, 1967.
32. Hubbert, M.K., and D.G. Willis, Mechanics of hydraulic fracturing, Trans. Am. Inst. Min. Metall. Pet. Eng., 210, 153-163, 1957.
33. Huenges, E., B. Engeser, J. Erzinger, W. Kessels, and J. Kück, The permeable crust: Geohydraulic properties down to 9100 m depth, J. Geophys. Res., this issue.
34. International Society of Rock Mechanics, Suggested methods for determining the uniaxial compressive strength and deformability of rock materials, Comm. Stand. Lab. and Field Tests, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 16, 135-140, 1979.
35. Jaeger, J.C., and N.G.W. Cook, Fundamentals of Rock Mechanics, Chapman and Hall, New York, 1979.
36. Kirsch, G., Die Theorie der Elastizität und die Bedürfnisse der Festigkeitslehre, VDI Z, 42, 797-807, 1898.
37. Kohlstedt, D.L., B. Evans, and S.J. Mackwell, Strength of the lithosphere: Constraints imposed by laboratory experiments, J. Geophys. Res., 100, 17587-17602, 1995.
38. Lee, M., and B.C. Haimson, Laboratory study of borehole breakouts in Lac du Bonnet Granite: A case of extensile failure mechanism, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 1039-1045, 1993.
39. Lee, M.Y., and B.C. Haimson, Statistical evaluation of hydraulic fracturing stress measurement parameters, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 26, 447-456, 1989.
40. Leydecker, G., Erdbeben in der Bundesrepublik Deutschland mit Randgebieten fuer die Jahre 1000 bis 1981, Geol. Jahrb., Reihe E, 36, 3-83, 1986.
41. Li, F., Improvements on hydrofracturing technology and its interpretation of data, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 26, 681-685, 1989.
42. Lich, S., and J. Duyster, Shape and fracture analysis on cuttings - KTB Hauptbohrung, KTB Rep. 93-2, pp. 223-225, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1993.
43. Mastin, L.G., B. Heinemann, A. Krammer, K. Fuchs, and M.D. Zoback, Stress orientation in the KTB pilot hole determined from wellbore breakouts, Sci. Drill., 2, 1-12, 1991.
44. McGarr, A., Some constraints on levels of shear stress in the crust from observations and theory, J. Geophys. Res., 85, 6231-6238, 1980.
45. McGarr, A., and N.C. Gay, State of stress in the earth's crust, Annu. Rev. Earth Planet. Sci., 6, 405-436, 1978.
46. Mogi, K., The influence of the dimensions of specimens on the fracture strength of rocks, Bull. Earthquake Res. Inst. Univ. Tokyo, 40, 175-185, 1966.
47. Mogi, K., Effect of the triaxial stress system on the failure of dolomite and limestone, Tectonophysics, 11, 111-127, 1971.
48. Mohr, O., Abhandlungen aus dem Gebiet der technishen Mechanik, 2nd ed., Ernst und Sohn, Berlin, 1914.
49. Moos, D., and M.D. Zoback, Utilization of observations of well bore failure to constrain the orientation and magnitude of crustal stresses: Application to Continental, Deep Sea Drilling Project, and Ocean Drilling Program boreholes, J. Geophys. Res., 95, 9305-9325, 1990.
50. Müller, B., M.L. Zoback, K. Fuchs, L. Mastin, S. Gregersen, N. Pavoni, O. Stephansson, and C. Ljunggren, Regional patterns of tectonic stress in Europe, J. Geophys. Res., 97, 11783-11803, 1992.
51. Nowacki, W., Thermoelasticity, Addison-Wesley, Reading, Mss., 1962.
52. Peska, P., and M.D. Zoback, Compressive and tensile failure of inclined wellbores and determination of in situ stress and rock strength, J. Geophys. Res., 100, 12791-12811, 1995.
53. Pine, R.J., P. Ledingham, and C.M. Merrifield, In-situ stress measurement in the Cammenellis Granite, II, Hydrofracture tests at Rosemanowes Quarry to depths of 2000 m, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 20, 63-72, 1983.
54. Rauen, A., E. Huenges, C. Bücker, K.E. Wolter, and J. Wienand, Tiefbohrung KTB-Oberpfalz VB, Ergebnisse der geowissenschaftlichen Bohrungsbearbeitung im KTB-Feldlabor, Teufenbereich von 3500 4000.1 m: D. Geophysik, KTB-Report 90-2, pp. D1-D64, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1990.
55. Ritchie, R.H., and A.Y. Sakakura, Asymptotic expansions of solutions of the heat conduction equation in internally bounded cylindrical geometry, J. Appl. Phys., 27, 1453-1459, 1956.
56. Röckel, T., and O. Natau, Tiefbohrung KTB Oberpfalz VB - Erste Ergebnisse felsmechanischer Indexversuche bis 1998 m, KTB Rep. 89-2, pp. H1-H22, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1989.
57. Röckel, T. and O. Natau, Rock Mechanics, Depth Interval 0 - 6000 m, In KTB Rep. 92-2, edited by Emmermann, R., H.-G. Dietrich, J. Lauterjung, and T. Wöhrl, pp. E1-E7, Hannover, Germany, 1992.
58. Röckel, T., O. Natau, and H.-G. Dietrich, Core reorientation by comparison of core instabilities and borehole instabilities, KTB Rep. 92-2, pp. F1-F17, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1992.
59. Rummel, F., Stresses and tectonics of the upper continental crust - A review, paper presented at International Symposium on Rock Stress and Rock Stress Measurements, Int. Soc. Rock Mech., Stockholm, 1986.
60. Rummel, F., Fracture mechanics approach to hydraulic fracturing stress measurements, in Fracture Mechanics of Rock, edited by B.K. Atkinson, pp. 217-240, Academic, San Diego, Calif., 1987.
61. Rummel, F., G. Möhring-Erdmann, and J. Baumgärtner, Stress constraints and hydrofracturing stress data for the continental crust, Pure Appl. Geophys., 124, 875-895, 1986.
62. Schmitt, D.R., and M.D. Zoback, Poroelastic effects in the determination of the maximum horizontal principal stress in hydraulic fracturing tests - A proposed breakdown equation employing a modified effective stress relation for tensile failure, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 26, 499-506, 1989.
63. Scholz, C.H., The Mechanics of Earthquakes and Faulting, , Cambridge Univ. Press, New York, 1990.
64. Shamir, G., and M.D. Zoback, Stress orientation profile to 3.5 km depth near the San Andreas Fault at Cajon Pass, California, J. Geophys. Res., 97, 5059-5080, 1992.
65. Sibson, R.H., Frictional constraints on thrust, wrench and normal faults, Nature, 249, 542-544, 1974.
66. Skinner, B.J., Thermal expansion, in Handbook of Physical Constants, pp. 76-96, Geol. Soc. of Am., Boulder, Colo., 1966.
67. Stephansson, O., L.-O. Dahlstrom, K. Berstrome, P. Sarkka, A. Vaatainen, A. Myrvang, O. Fjeld, and T.H. Hansen, Fennoscandian rock stress data base-FRSDB, Res. Rep. LULEA 1987:06, 120 pp., Lulea Univ., Lulea, Sweden, 1987.
68. Stephens, G., and B. Voight, Hydraulic fracturing theory for conditions of thermal stress, Int. J. Rock Mech. Min. Sci., 19, 279-284, 1982.
69. Stock, J.M., J.H. Healy, S.H. Hickman, and M.D. Zoback, Hydraulic fracturing stress measurements at Yucca Mountain, Nevada, and relationship to the regional stress field, J. Geophys. Res., 90, 8691-8706, 1985.
70. Vernik, L., and M.D. Zoback, Estimation of maximum horizontal principal stress magnitude from stress induced well bore breakouts in the Cajon Pass scientific research borehole, J. Geophys. Res., 97, 5109-5119, 1992.
71. Vernik, L., D. Lockner, and M.D. Zoback, Anisotropic strength of some typical metamorphic rocks from the KTB pilot hole, Germany, Sci. Drill., 3, 151-160, 1992a.
72. Vernik, L., M.D. Zoback, and M. Brudy, Methodology and application of the wellbore breakout analysis in estimating the maximum horizontal stress magnitude in the KTB pilot hole, Sci. Drill., 3, 161-169, 1992b.
73. Wiebols, G.A., and N.G.W. Cook, An energy criterion for the strength of rock in polyaxial compression, Int. J. Rock Mech. Min. Sci., 5, 529-549, 1968.
74. Wolter, K., T. Röckel, C. Bücker, H. Dietrich, and H. Berckhemer, Core disking in the KTB drill cores and the determination of the in situ stress orientation, KTB-Report 90-8, pp. GI-GI2, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1990.
75. Zang, A., K. Wolter, and H. Berkhemer, Strain recovery, microcracks and elastic anisotropy of drill cores from KTB deep well, Sci. Drill., 1, 115-126, 1989.
76. Zang, A., H. Berckhemer, and K. Wolter, Inferring the in-situ state of stress from stress relief microcracking in drill cores, KTB-Report 90-8, pp. F1-F20, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1990.
77. Zemanek, J., E.E. Glenn, L.J. Norton, and R.L. Caldwell, Formation evaluation by inspection with the borehole televiewer, Geophysics, 35, 254-269, 1970.
78. Zheng, Z., J. Kemeny, and N.G.W. Cook, Analysis of borehole breakouts, J. Geophys. Res., 94, 7171-7182, 1989.
79. Zoback, M.D. and B.C. Haimson (Ed.), Workshop on Hydraulic Fracturing Stress Measurements, U.S. Nat. Comm. for Rock Mech., Monterey, Calif., 1983.
80. Zoback, M.D., and H.-P. Harjes, Injection-induced earthquakes and crustal stress at 9 km depth at the KTB deep drilling site, J. Geophys, Res., this issue.
81. Zoback, M.D., and J.H. Healy, Friction, faulting and in situ stress, Ann. Geophys., 2, 689-698, 1984.
82. Zoback, M.D., and J.H. Healy, In situ stress measurements to 3.5 km depth in the Cajon Pass scientific research borehole: Implications for the mechanics of crustal faulting, J. Geophys. Res., 97, 5039-5057, 1992.
83. Zoback, M.D., and S. Hickman, In situ study of the physical mechasnisms controlling induced seismicity at Monticello reservoir, South Carolina, J. Geophys. Res., 87, 6959-6974, 1982.
84. Zoback, M.D., and M.L. Zoback, Tectonic stress field of North America and relative plate motions, in Neotectonics of North America, Decade Map, vol. 1, edited by D.B. Slemmons, E.R. Engdahl, M.D. Zoback, and M.D. Blackwell, pp. 339-366, Geol. Soc. of Am., Boulder, Colo., 1991.
85. Zoback, M.D., D. Moos, and L. Mastin, Wellbore breakouts and in situ stress, J. Geophys. Res., 90, 5523-5530, 1985.
86. Zoback, M.D., et al., Upper-crustal strength inferred from stress measurements to 6 km depth in the KTB borehole, Nature, 365, 633-635, 1993.
87. Zoback, M.L., First and second order patterns of stress in the lithosphere: The World Stress Map Project, J. Geophys. Res., 97, 11703-11728, 1992.
88. Zoback, M.L., and M.D. Zoback, State of stress in the conterminous United States, J. Geophys. Res., 85, 6113-6156, 1980.
89. Zoback, M.L., et al., Global patterns of tectonic stress, Nature, 341, 291-298, 1989.
90. Zoth, G., Temperature measurements during the 6000 m logging campaign in the KTB-Oberpfalz HB, KTB Rep. 93-1, pp. 215-217, Niedersächsisches Landesamt für Bodenforsch., Hannover, Germany, 1993.