Exit Effects in Circulating Fluidized Bed Risers

Canadian Journal of Chemical Engineering

Volumn 75, Issue 6, 1997, Pages 1001-1010

  Pugsley, Todd ^a   Lapointe, Diane ^a   Hirschberg, Bernd ^b   Werther, Joachim ^b  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

^b HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

CFB; Circulating fluidized beds; Exit effects; Fluidization; Hydrodynamics

Indexed keywords

CATALYTIC CRACKING; CIRCULATING MEDIA; FLUIDIZED BEDS; HYDRODYNAMICS;

CIRCULATING FLUIDIZED BEDS; FLUID CATALYTIC CRACKING;

FLUIDIZED BED PROCESS;

CONTRACTION; FLUIDIZED BED; HYDRODYNAMICS; PRESSURE DROP;

EID: 0031394058     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450750602     Document Type: Article

References (28)

1. Aguillón, J., K. Shakourzadeh, and P. Guigon, "A New Method for Local Solid Concentration Measurement in Circulating Fluidized Bed", Powder Technol. 86, 251-255 (1996).
2. Bader, R., J. Findlay, and T. M. Knowlton, "Gas/Solid Flow Patterns in a 30.5 cm Diameter Circulating Fluidized Bed", in "Circulating Fluidized Bed Technology II", P. Basu and J.F. Large, Eds., Pergamon Press, New York, NY (1988), pp. 123-127.
3. Bai, D. -R., Y. Jin, Z. -Q. Yu, and J. -X. Zhu, "The Axial Distribution of the Cross-Sectionally Averaged Voidage in Fast Fluidized Beds", Powder Technol. 71, 51-58 (1992).
4. Bernard, J. R., "Hydrodynamics of Riser Units and their Impact on FCC Operation", presented at "Chemical Reactor Engineering for Sustainable Processes and Products", Banff, AB, June 8 to 13 (1997).
5. Berruti, F., J. Chaouki, L. Godfroy, T.S. Pugsley, and G.S. Patience, "Hydrodynamics of Circulating Fluidized Bed Risers: A Review", Can. J. Chem. Eng. 73, 579-302 (1995).
6. Bi, H. T., J. R. Grace, and J. Zhu, "Regime Transitions Affecting Gas-Solids Suspensions and Fluidized Beds", Trans. IChem E, 73 (part A), 154-161 (1995).
7. Brereton, C. M. H. and J. R. Grace, "End Effects in Circulating Fluidized Bed Hydrodynamics", in "Circulating Fluidized Bed Technology IV", A.A. Avidan, Ed., AIChE, New York, NY (1994), pp. 137-144.
8. Contractor, R. M., G. S. Patience, D. I. Garnett, H. S. Horowitz, G.M. Sisler, and E. Bergna, "A New Process for n-Butane Oxidation to Maleic Anhydride Using a Circulating Fluidized Bed Reactor", in "Circulating Fluidized Bed Technology IV", A. A. Avidan, Ed., AIChE, New York, NY, (1994), pp. 387-391.
9. Dry, R. J., R. B. White, and T. Joyce, "Correlation of Solids Circulation Rate in Circulating Fluidized Bed Systems" in "Circulating Fluidized Bed Technology IV", A. A. Avidan, Ed., AIChE, New York, NY (1994), pp. 621-627.
10. Grace, J. R., "Riser Geometry Influence on CFB Particle and Fluid Dynamics", in "Pre-prints of the Fifth International Conference on Circulating Fluidized Bed Technology", Beijing, P. R. China (1996), pp. PL2-1-PL2-16.
11. Hartge, E.-U., D. Rensner, and J. Werther, "Solids Concentration and Velocity in Circulating Fluidized Beds", in "Circulating Fluidized Bed Technology II", P. Basu and J. F. Large, Eds., Pergamon Press, New York, NY (1988), pp. 165-180.
12. King, D., "Fluidized Catalytic Crackers: An Engineering Review", in "Fluidization VII", O. E. Potter and D. J. Nicklin, Eds., Engineering Foundation, New York, NY (1992), pp. 15-26.
13. Knowlton, T. M. and I. Hirsan, "L-Valves Characterized for Solids Flow", Hydrocarbon Proc. 57 (3), 149-156 (1978).
14. Kruse, M. and J. Werther, "2D Gas and Solids Flow Prediction in Circulating Fluidized Beds Based on Suction Probe and Pressure Profile Measurements", Chem. Eng. and Proc. 34, 185-203 (1995).
15. Li, Y. and M. Kwauk, "The Dynamics of Fast Fluidization," in "Fluidization", J.R. Grace and J.M. Matsen, Eds., Plenum Press, New York, NY (1980), pp. 537-544.
16. Martin, M. P., P. Turlier, J. R. Bernard, and G. Wild, "Gas and Solid Behavior in Cracking Circulating Fluidized Beds", Powder Technol. 70, 249-258 (1992).
17. Matsen, J. M., "Some Characteristics of Large Solids Circulation Systems", in "Fluidization Technology", D. L. Keairns, Ed., Hemisphere, New York, NY (1976), pp. 135-149.
18. Nieuwland, J. J., R. Meijer, J. A. M. Kuipers, and W. P. M. van Swaaij, "Measurements of Solids Concentration and Axial Solids Velocity in Gas-Solid Two Phase Flows", Powder Technol. 87, 127-139 (1996).
19. Patience, G. S., J. Chaouki, F. Berruti, and R. Wong, "Scaling Considerations for Circulating Fluidized Bed Risers", Powder Technol. 72, 31-37 (1992).
20. Pugsley, T. S. and Berruti, F., "A Fully Predictive Hydrodynamic Model for Circulating Fluidized Bed Risers", Powder Technol. 89, 57-69 (1996).
21. Reh, L., "Fluidized Bed Processing", Chem. Eng. Prog. 67(2), 58-63 (1971).
22. Senior, R. C. and C. Brereton, "Modelling of Circulating Fluidized Bed Solids Flow and Distribution", Chem. Eng. Sci. 47(2), 281-296 (1992).
23. Shingles, T. M. and A. F. McDonald, "Commercial Experience with Synthol CFB Reactors", in "Circulating Fluidized Bed Technology II", P. Basu and J. F. Large, Eds., Pergamon Press, New York, NY. (1988), pp. 43-50.
24. Squires, A. M., "The Story of Fluid Catalytic Cracking: The First Circulating Fluid Bed", in "Circulating Fluidized Bed Technology", P. Basu, Ed., Pergamon Press, New York, NY, (1986) pp. 1-19.
25. Werther, J., "Fluid Mechanics of Large Scale CFB Units", in "Circulating Fluidized Bed Technology IV", A. A. Avidan, Ed., AIChE, New York, NY (1994), pp. 1-14.
26. Yerushalmi, J., D. H. Turner and A. M. Squires, "The Fast Fluidized Bed", Ind. Eng. Chem. Proc. Des. Dev. 15(1), 47-53 (1976).
27. Zheng, Q.-Y. and H. Zhang, "Experimental Study of the Effect of Bed Exits with Different Geometric Structure on Internal Recycling of Bed Material in CFB Boilers", in "Circulating Fluidized Bed Technology IV", A. A. Avidan, Ed., AIChE, New York, NY (1994), pp, 145-151.
28. Zheng, Q.-Y., "Understanding the End Effect of Bed Exit in CFB", presented at the Workshop II on Modelling and Control of Fluidized Bed Systems, June 1, (1996), Beijing, P.R. China.