-
1
-
-
84996243097
-
Analysis of central bursting defects in extrusion and wire drawing
-
Avitzur, B. Analysis of central bursting defects in extrusion and wire drawing. Trans. ASME, J. Engng for Industry, 1968, 90, 79-86.
-
(1968)
Trans. ASME, J. Engng for Industry
, vol.90
, pp. 79-86
-
-
Avitzur, B.1
-
2
-
-
0014737694
-
Analysis of the effects of strain hardening on central bursting defects in drawing and extrusion
-
Zimerman, Z. and Avitzur, B. Analysis of the effects of strain hardening on central bursting defects in drawing and extrusion. Trans. ASME, J. Engng for Industry, 1970, 92(1), 135-145.
-
(1970)
Trans. ASME, J. Engng for Industry
, vol.92
, Issue.1
, pp. 135-145
-
-
Zimerman, Z.1
Avitzur, B.2
-
3
-
-
0042857337
-
Selection of operating parameters to prevent central bursting defects during cold extrusion
-
(Ed. A. L. Haffmanner), Cleveland, Ohio, October Plenum Press, London
-
Zimerman, Z., Darlington, H. and Kottcamp Jr, E. H. Selection of operating parameters to prevent central bursting defects during cold extrusion. In Proceedings of Symposium on The Relation between Theory and Practice of Metal Forming (Ed. A. L. Haffmanner), Cleveland, Ohio, October 1970, pp. 47-62 (Plenum Press, London).
-
(1970)
Proceedings of Symposium on the Relation between Theory and Practice of Metal Forming
, pp. 47-62
-
-
Zimerman, Z.1
Darlington, H.2
Kottcamp Jr., E.H.3
-
4
-
-
0017468863
-
Stress and deformation analysis of the metal extrusion process
-
Lee, E. H., Mallet, R. L. and Yang, W. H. Stress and deformation analysis of the metal extrusion process. Comput. Meth. Appl. Mech. Engng, 1977, 10, 339-353.
-
(1977)
Comput. Meth. Appl. Mech. Engng
, vol.10
, pp. 339-353
-
-
Lee, E.H.1
Mallet, R.L.2
Yang, W.H.3
-
5
-
-
0017690626
-
Stress and deformation analysis of metal forming processes
-
(Eds R. F. Jones Jr, H. Armen and J. T. Fond), PVP-PB-025, American Society of Mechanical Engineers, New York
-
Lee, E. H., Mallet, R. L. and McMeeking, R. M. Stress and deformation analysis of metal forming processes. In Numerical Model for Manufacturing Processes (Eds R. F. Jones Jr, H. Armen and J. T. Fond), PVP-PB-025, 1977, pp. 19-33 (American Society of Mechanical Engineers, New York).
-
(1977)
Numerical Model for Manufacturing Processes
, pp. 19-33
-
-
Lee, E.H.1
Mallet, R.L.2
McMeeking, R.M.3
-
6
-
-
0022470233
-
The analysis of void growth that leads to central burst during extrusion
-
Aravas, N. The analysis of void growth that leads to central burst during extrusion. J. Mech. Phys. Solids, 1986, 34(1), 55-79.
-
(1986)
J. Mech. Phys. Solids
, vol.34
, Issue.1
, pp. 55-79
-
-
Aravas, N.1
-
7
-
-
0021974107
-
An improved finite element method for the analysis of damage and ductile fracture in cold forming processes
-
Gelin, J. C., Oudin, J. and Ravalard, Y. An improved finite element method for the analysis of damage and ductile fracture in cold forming processes. Ann. CIRP, 1985, 34(1), 209-213.
-
(1985)
Ann. CIRP
, vol.34
, Issue.1
, pp. 209-213
-
-
Gelin, J.C.1
Oudin, J.2
Ravalard, Y.3
-
8
-
-
0023416105
-
On modelling damage evolution during the drawing of metals
-
Mathur, K. K. and Dawson, P. R. On modelling damage evolution during the drawing of metals. Mechanics of Mater., 1987, 6, 179-196.
-
(1987)
Mechanics of Mater.
, vol.6
, pp. 179-196
-
-
Mathur, K.K.1
Dawson, P.R.2
-
9
-
-
0042857335
-
Simulation of cold extrusion process: A numerical-experimental comparison
-
Eds S. K. Ghosh and A. Niku-Lari, Pergamon, Oxford
-
Chevalier, L. and Le Nevez, P. Simulation of cold extrusion process: a numerical-experimental comparison. In CAD/CAM in Metal Working (Eds S. K. Ghosh and A. Niku-Lari), 1985, pp. 25-34 (Pergamon, Oxford).
-
(1985)
CAD/CAM in Metal Working
, pp. 25-34
-
-
Chevalier, L.1
Le Nevez, P.2
-
10
-
-
0027148930
-
Central bursting defects in drawing and extrusion: Numerical and ultrasonic evaluation
-
Alberti, N., Barcellona, A., Masnata, A. and Micari, F. Central bursting defects in drawing and extrusion: numerical and ultrasonic evaluation. Ann. CIRP, 1993, 42(1), 269-272.
-
(1993)
Ann. CIRP
, vol.42
, Issue.1
, pp. 269-272
-
-
Alberti, N.1
Barcellona, A.2
Masnata, A.3
Micari, F.4
-
11
-
-
0025628929
-
Extrusion analysis and workability prediction using finite element method
-
Liu, T. S. and Chung, N. L. Extrusion analysis and workability prediction using finite element method. Computs and Structs, 1990, 36(2), 369-377.
-
(1990)
Computs and Structs
, vol.36
, Issue.2
, pp. 369-377
-
-
Liu, T.S.1
Chung, N.L.2
-
12
-
-
0020750887
-
On the plastic and viscoplastic constitutive equations - Part I: Rules developed with internal variable concept
-
Chaboche, J. L. and Rousselier, G. On the plastic and viscoplastic constitutive equations - Part I: rules developed with internal variable concept. Trans. ASME, J. Pressure Vessel Technol., 1983, 105, 153-158.
-
(1983)
Trans. ASME, J. Pressure Vessel Technol.
, vol.105
, pp. 153-158
-
-
Chaboche, J.L.1
Rousselier, G.2
-
13
-
-
85024588547
-
On the plastic and viscoplastic constitutive equations - Part II: Application of internal variable concept to the 316 stainless steel
-
Chaboche, J. L. and Rousselier, G. On the plastic and viscoplastic constitutive equations - Part II: application of internal variable concept to the 316 stainless steel. Trans. ASME, J. Pressure Vessel Technol., 1983, 105, 159-164.
-
(1983)
Trans. ASME, J. Pressure Vessel Technol.
, vol.105
, pp. 159-164
-
-
Chaboche, J.L.1
Rousselier, G.2
-
14
-
-
0020783910
-
How to use damage mechanics
-
Lemaitre, J. How to use damage mechanics. Nucl. Engng Des., 1984, 80, 233-245.
-
(1984)
Nucl. Engng Des.
, vol.80
, pp. 233-245
-
-
Lemaitre, J.1
-
15
-
-
0002419282
-
Limits to ductility set by plastic flow localization
-
Eds D. P. Koistinen and N. M. Wang, Plenum Press, New York
-
Needleman, A. and Rice, J. R. Limits to ductility set by plastic flow localization. In Mechanics of Sheets Metal Forming (Eds D. P. Koistinen and N. M. Wang), 1978, pp. 237-267 (Plenum Press, New York).
-
(1978)
Mechanics of Sheets Metal Forming
, pp. 237-267
-
-
Needleman, A.1
Rice, J.R.2
-
16
-
-
0042857328
-
Consideration for a 'complete' continuum theory of multiaxial inelasticity for ductile metals
-
Cachan, France, 1-4 September
-
McDowell, D. L., Matin, E., Lee, Y. K., Miller, M. P. and Bertincelli, P. Consideration for a 'complete' continuum theory of multiaxial inelasticity for ductile metals. In Proceedings of MECAMAT '92, International Seminar on Multiaxial Plasticity, Cachan, France, 1-4 September 1992.
-
(1992)
Proceedings of MECAMAT '92, International Seminar on Multiaxial Plasticity
-
-
McDowell, D.L.1
Matin, E.2
Lee, Y.K.3
Miller, M.P.4
Bertincelli, P.5
-
21
-
-
0029772634
-
The effect of volume fraction of reinforcement on the elastic-viscoplastic response of metal-matrix composites
-
Lim, L. G. and Dunne, F. P. E. The effect of volume fraction of reinforcement on the elastic-viscoplastic response of metal-matrix composites. Int. J. Mech. Sci., 1996, 38(1), 19-39.
-
(1996)
Int. J. Mech. Sci.
, vol.38
, Issue.1
, pp. 19-39
-
-
Lim, L.G.1
Dunne, F.P.E.2
-
22
-
-
0030079885
-
Modelling void nucleation and growth processes in a particulate reinforced metal matrix composite material
-
Lim, L. G. and Dunne, F. P. E. Modelling void nucleation and growth processes in a particulate reinforced metal matrix composite material. Comput. Mater. Sci., 1996, 5, 177-186.
-
(1996)
Comput. Mater. Sci.
, vol.5
, pp. 177-186
-
-
Lim, L.G.1
Dunne, F.P.E.2
-
23
-
-
0026238032
-
An analysis of the effect of matrix void growth on deformation and ductility in metal-ceramic components
-
Llorca, J., Needleman, A. and Suresh, S. An analysis of the effect of matrix void growth on deformation and ductility in metal-ceramic components. Acta Metall. Mater., 1991, 39(10), 2317-2335.
-
(1991)
Acta Metall. Mater.
, vol.39
, Issue.10
, pp. 2317-2335
-
-
Llorca, J.1
Needleman, A.2
Suresh, S.3
-
24
-
-
0017417249
-
Continuum theory of ductile rupture by void nucleation and growth: Part I - Yield criterion and flow rules for porous ductile media
-
Gurson, A. L. Continuum theory of ductile rupture by void nucleation and growth: Part I - yield criterion and flow rules for porous ductile media. Trans. ASME, J. Engng Mater. Technol., 1977, 99, 2-15.
-
(1977)
Trans. ASME, J. Engng Mater. Technol.
, vol.99
, pp. 2-15
-
-
Gurson, A.L.1
-
26
-
-
0002277291
-
Some aspects of non-isotropic workhardening in finite strain plasticity
-
(Eds E. H. Lee and R. L. Mallet), Process Research Workshop, Standford, July
-
Nagtegaal, J. C. and De Jong, J. E. Some aspects of non-isotropic workhardening in finite strain plasticity. In Plasticity of Metals at Finite Strain: Theory, Experiment and Computation (Eds E. H. Lee and R. L. Mallet), Process Research Workshop, Standford, July 1981, pp. 65-101.
-
(1981)
Plasticity of Metals at Finite Strain: Theory, Experiment and Computation
, pp. 65-101
-
-
Nagtegaal, J.C.1
De Jong, J.E.2
-
27
-
-
0026392823
-
Stress analysis of axisymmetric extrusion in the presence of strain-induced anisotropy modeled as combined isotropic-kinematic hardening
-
Suh, Y. S., Agah-Tehrani, A. and Chung, K. Stress analysis of axisymmetric extrusion in the presence of strain-induced anisotropy modeled as combined isotropic-kinematic hardening. Comput. Meth. Appl. Mech. Engng, 1991, 93, 127-150.
-
(1991)
Comput. Meth. Appl. Mech. Engng
, vol.93
, pp. 127-150
-
-
Suh, Y.S.1
Agah-Tehrani, A.2
Chung, K.3
-
28
-
-
0024985962
-
The plastic spin in viscoplasticity
-
Dafalias, Y. F. The plastic spin in viscoplasticity. Int. J. Solids Struct., 1990, 26(2), 149-163.
-
(1990)
Int. J. Solids Struct.
, vol.26
, Issue.2
, pp. 149-163
-
-
Dafalias, Y.F.1
|