Understanding the potential and pH dependency of high-strength β-titanium alloy environmental crack initiation

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 12, 1997, Pages 2645-2656

  Kolman, D G ^a,c   Scully, J R ^a,b  

^a UNIVERSITY OF VIRGINIA   (United States)

^b LOS ALAMOS NATIONAL LABORATORY   (United States)

^c University of Virginia   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; DISSOLUTION; HYDROGEN EMBRITTLEMENT; HYDROLYSIS; METALLIC FILMS; PH EFFECTS; PLASTIC DEFORMATION; SODIUM CHLORIDE; STRAIN RATE;

ENVIRONMENT ASSISTED CRACKING (EAC); OPEN CIRCUIT POTENTIALS (OCP);

TITANIUM ALLOYS;

EID: 0031373359     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0021-x     Document Type: Article

References (63)

1. L.M. Young, O.A. Young, Jr., J.R. Scully, and R.P. Gangloff: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1257-72.
2. R.J.H. Wanhill: Br. Coir. J., 1975, vol. 10 (2), pp. 69-78.
3. B.P. Somerday, J.P. Grandie, and R.P. Gangloff: Proc. Tri-Service Conf. on Corrosion, T. Naguy, ed., Materials Laboratory, Wright Patterson Air Force Base, OH, 1994, pp. 375-92.
4. D.N. Fager and W.F. Spurr: Trans. ASM, 1968, vol. 61, pp. 283-92.
5. (a) M.J. Blackburn, J.A. Feeney, and T.R. Beck: Advances in Corrosion Science and Technology, M.G. Fontana and R.W. Staehle, eds., Plenum Press, New York, NY, 1972, pp. 67-292;
6. (b) I. Azkarate and A. Pelayo: Presented at the INASMET Conf., San Sebastain, Spain, 1992;
7. D.M. Aylor: Corrosion/94, National Association of Corrosion Engineers, Baltimore, MD, 1994, paper no. 94484.
8. J.A. Feeney and M.J. Blackburn: Metall. Trans., 1970, vol. 1, pp. 3309-23.
9. T.R. Beck: in The Theory of Stress Corrosion Cracking, J.C. Scully, ed., NATO Scientific Affairs Division, Brussels, 1971, pp. 64-85.
10. D.A. Meyn and P.S. Pao: in Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM STP 1210, R.D. Kane, ed., ASTM, Philadelphia, PA, 1993, pp. 158-69.
11. G. Sanderson and J.C. Scully: Corr. Sei., 1966, vol. 6, pp. 541-42.
12. D. Hardie: in Environment-Induced Cracking of Metals, R.P. Gangloff and M.B. Ives, eds., NACH, Houston, TX, 1990, pp. 347-61.
13. J.A.S. Green and A.J. Sedriks: Corrosion, 1972, vol. 28 (6), pp. 226230.
14. I.I. Phillips, P. Poole, and L.L. Shrier: Corr. Sei., 1972, vol. 12, p. 855.
15. D.N. Williams: J. Inst. Met., 1962-63, vol. 91, pp. 147-52.
16. H.G. Nelson: 1st Thermal Structures Conf., E. Thornton, ed., University of Virginia, Charlottesville, VA, 1990, pp. 301-11.
17. A.D. McQuillan: Proc. R. Soc. London, Ser. A, 1950, vol. 204, pp. 309-23.
18. G.A. Young: Scripta Metall, 1993, vol. 28, pp. 507-12.
19. O.A. Young, Jr. and J.R. Scully: in Beta Titanium Alloys in the 1990 's, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 147-58.
20. (a) O.A. Young, Jr. and J.R. Scully: Corrosion, 1994, vol. 50, pp. 919-33;
21. (b) M.A. Gaudett and J.R. Scully: Scripta Mater., 1997, vol. 36 (5), pp. 565-72.
22. J.E. Costa, D. Banerjee, and J.C. Williams: in Beta Titanium Alloys in the 80's, R.R. Boyer and H.W. Rosenberg, eds., TMS, Warrendale, PA, 1984, pp. 69-84.
23. B.G. Pound: Corr. J., 1991, vol. 47, pp. 99-104.
24. T.R. Beck: Proc. Conf., Fundamental Aspects of Stress Corrosion Cracking, R.W. Staehle, A.J. Forty, and D. VanRooyen, eds., NACE, Houston, TX, 1969, p. 608.
25. T.R. Beck: in Passhity of Metals, R.P. Frankenthal and J. Kruger, eds., The Electrochemical Society, Pennington, NJ, 1978, pp. 1035-52.
26. R.W. Schutz and D.E. Thomas: in ASM Handbook, vol. 13, Corrosion, ASM INTERNATIONAL, Metals Park, OH, 1992, pp. 669-706.
27. Z.A. Foroulis: Titanium '80 Science and Technology, Proc. 4th Int. Conf. on Titanium, H. Kimura and O. Izumi, eds., TMS, Warrendale, PA, 1980, vol. 4, p. 2705.
28. D.T. Powell and J.C. Scully: Corrosion, 1968, 24, p. 151.
29. B.F. Brown, C.T. Fujii, and E.P. Dahlberg: J. Electrochem. Soc., 1969, vol. 116, p. 218.
30. (a) R.W. Schutz and L.C. Covington: Corrosion, 1981, vol. 37, pp. 585-91;
31. (b) I. Dugdale and J.B. Cotton: Con. Sei., 1964, vol. 4, pp. 397-411;
32. R.W. Schutz: in Beta Titanium Alloys in the 1990's, D. Eylon, R.R. Boyer, and D.A. Koss, eds. TMS, Warrendale, PA, 1993, pp. 75-91;
33. J.P. Simpson: in Biological and Biomechanical Performances of Biomaterials, P. Christel, A. Meunier, and A J.C. Lee, Elsevier Scientific Publishers, Amsterdam, 1956;
34. (e) S. Yu and J.R. Scully: University of Virginia, Charlottesville, VA, private communication, 1996.
35. D.O. Kolman and J.R. Scully: J. Electrochem. Soc., 1993, vol. 140, pp. 2771-79.
36. T.J. Headley and H.J. Rack: Metall. Trans. A, 1979, vol. 10A, pp. 909-20.
37. J.R. Wood, J.G. Ferrero, P.A. Russo, and R.W. Schutz: in Beta Titanium Alloys in the 1990's, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, p. 463.
38. P.O. Gartland: STF16-A88085, SINTEF, Trondheim, Norway, 1988.
39. D.O. Kolman and J.R. Scully: J. Electrochem. Soc., 1995, vol. 142, pp. 2179-88.
40. D.O. Kolman and J.R. Scully: J. Electrochem. Soc., 1996, vol. 143, pp. 1847-60.
41. D.G. Kolman, Ph.D. Dissertation, UVa. Jan. 1996. Passivity and Bare Surface Electrode Kinetics on β-Ti in Aqueous Chloride Solutions and Their Relevancy to Environmentally Assisted Cracking.
42. (a) C.F. Shih: J. Mech. Phys. Solids, 1981, vol. 29, pp. 305-26;
43. (b) B.P. Somerday, Ph.D. Thesis, UVA, Aug. 1997. Metallurgical and Crack-Tip Mechanics Effects on Environment-Assisted Cracking of.
44. A. Turbull: in Embrittlement by the Localized Crack Environment, R.P. Gangloff, ed., TMS, Warrendale, PA, 1984, pp. 3-31.
45. R.P. Gangloff and A. Tumbull: in Modeling Environmental Effects on Crack Growth Processes, R.H. Jones and W.W. Gerberich, eds., IMS, Warrendale, PA, 1986, p. 55.
46. B.F. Brown: in Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, R.W. Staehle, J. Hochmann, R.D. McCright, and J.E. Slater, eds., NACE, Houston, TX, 1977, pp. 747-50.
47. D.G. Kolman and J.R. Scully: J. Electrochem. Soc., 1994, vol. 141, pp. 2633-41.
48. T.R. Beck: Electrochim. Ada, 1973, vol. 18, pp. 807-14.
49. J.R. Ambrose and J. Kruger: J. Electrochem. Soc., 1974, vol. 121, pp. 599-604.
50. D. Laser, M. Yaniy, and S. Gottesfeld: J. Electrochem. Soc., 1978, vol. 125, p. 358.
51. C.F. Baes, Jr. and R.E. Mesmer: The Hydrolysis of Cations, Krieger Publishing Co., Malabar, FL, 1986.
52. D.W. Johnson, S.H. Pack, and J.W. DeFord: J. Appl. Phys., 1975, vol. 46, p. 1026.
53. J.L. Waisman, G. Sines, and L.B. Robinson: Metall. Trans. A, 1973, vol. 4A, pp. 291-302.
54. R.J. Wasilewski and G.L. Kehl: Metallurgia, 1954, vol. 50, pp. 225-30.
55. R.C. Newman: Corrosion, 1994, vol. 50 (9), pp. 682-86.
56. J.A.S. Green, and A.J. Sedriks: Metall. Trans. A, 1971, vol. 2A, pp. 1807-12.
57. R.VV. Schutz: in Beta Titanium Alloys in the 1990's, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 75-91.
58. D.G. Kolman and J.R. Scully: in Effects of the Environment on the Initiation of Crack Growth, ASTM STP 1298, W.A. Van der Sluys, R.S. Piascik, and R. Zawierucha, eds., ASTM, West Conshocken, PA.
59. P.K. Subramanyan: in Comprehensive Treatise of Electrochemistry, vol. 4, Electrochemical Materials Science, J.O'M. Bockris, B.E. Conway, E. Yeager, and R.E. White, eds., Plenum Press, New York, NY, 1981, pp. 411-62.
60. E.J. Kelly and H.R. Bronstein: J. Electrochem. Soc., 1984, vol. 131, pp. 2232-38.
61. T. Ohtsuka, M. Masudo, and N. Sato: J. Electrochem. Soc., 1987, vol. 134, pp. 2406-10.
62. A. Turnbull and M. Saenz de Santa Maria: Metall. Trans. A, 1988, vol. 19A, pp. 1795-1806.
63. R.D. McCright: in Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, R.W. Staehle, J. Hochmann, R.D. McCright, and J.E. Slater, eds., NACE, Houston, TX, 1977, pp. 306-25.