The effect of processing on the hot workability of Ti-48Al-2Nb-2Cr alloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 12, 1997, Pages 2543-2553

  Fuchs, G E ^a  

^a LOCKHEED MARTIN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTING; HOT ISOSTATIC PRESSING; INGOTS; METAL EXTRUSION; METALLOGRAPHIC MICROSTRUCTURE; STRAIN RATE; TITANIUM POWDER METALLURGY;

INGOT METALLURGY; TITANIUM ALUMINIDE;

TITANIUM ALLOYS;

EID: 0031362893     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0012-y     Document Type: Article

References (40)

1. H.A. Lipsitt: MRS Symp. Proc., 1985, vol. 39, pp. 341-64.
2. Y.-W. Kim: J. Met., 1989, vol. 41, pp. 24-30.
3. Y.-W. Kirn and D.M. Dimiduk: J. Met., 1991, vol. 43, pp. 4(M7.
4. Y.-W. Kirn: J. Met., 1994, vol. 46, pp. 30-40.
5. Y.-W. Kim: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1995, pp. 637-54.
6. V. Seetharaman and C.M. Lombard: Proc. Microstmcture/Property Relationships in Titanium Aluminides and Alloys, TMS-AIME, Warrendale, PA, 1991, pp. 237-51.
7. D.S. Shih and O.K. Skarr: MRSSymp. Proc., 1991, vol. 213, pp. 72732.
8. D. Zhao, K.G. Anand, J.J. Valencia, and S.J. Wolff: MRS Symp. Proc., 1992, vol. 273, pp. 113-18.
9. S.L. Semiatin, N. Frey, C.R. Thompson, J.D. Bryant, S. El-Soudani, and R. Tisler: Scripta Metall. Mater., 1990, vol. 24, pp. 1403-08.
10. S.L. Semiatin, N. Frey, S. El-Soudani, and J.D. Bryant: Metall. Trans. A, 1992, vol. 23A, pp. 1719-35.
11. V. Seetharaman, J.C. Malas, and C.M. Lombard: MRS Symp. Proc., 1991, vol. 213, pp. 889-94.
12. V. Seetharaman, R.L. Goetz, and S.L. Semiatin: MRS Symp. Proc., Pittsburgh, PA, 1991, vol. 213, pp. 895-900.
13. D. Watkins, H.R. Piehler, V. Seetharaman, C.M. Lombard, and S.L. Semiatin: Metall. Trans. A, 1992, vol. 23A, pp. 2669-72.
14. S.L. Semiatin, P.A. McQuay, M. Stucke, W.R. Kerr, and Y.-W. Kim: MRSSymp. Proc., 1991, vol. 213, pp. 883-88.
15. K. Wurzwallner, H. Clemens, P.S. Schretter, A. Bartels, and C. Koeppe: MRS Symp. Proc., 1993, vol. 288, pp. 867-72.
16. SX. Semiatin, D.C. Vollmer, S. El-Soudani, and C. Su: Scripta Metall. Mater., 1990, vol. 24, pp. 1409-13.
17. J. Beddoes, L. Zhao, J.-P. Immarigeon, and W. Wallace: Mater. Sei. Eng., 1994, vol. A183, pp. 211-22.
18. S.L. Semiatin, G.R. Cornish, and E. Eylon: Mater. Sei. Eng., 1994, vol. A185, pp. 45-53.
19. A. Szaruga, L. Rothenflue, R. Srinivasan, and H.A. Lipsitt: Scripta Metall. Mater., 1992, vol. 26, pp. 1565-70.
20. J.P. Singh, E. Tuval, I. Weiss, and R. Srinivasan: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS-AIME, Warrendale, PA, 1995, pp. 547-54.
21. J.D. Bryant, S.L. Semiatin, J.R. Maisano, D.T. Winter, and A.R.H. Barren: MRSSymp. Proc., 1991, vol. 190, pp. 59-64.
22. S.L. Semiatin and P.A. McQuay: Metall: Trans. A, 1992, vol. 23A, pp. 149-61.
23. R.M. Nekkanti, P.A. McQuay, and S.L. Semiatin: Scripta Metall., 1992, vol. 26, pp. 1089-94.
24. G.E. Fuchs: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS-AIME, Warrendale, PA, 1993, pp. 195-203.
25. G.E. Fuchs: MRS Symp. Proc., 1992, vol. 288, pp. 847-52.
26. P.L. Martin: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS-AIME, Warrendale, PA, 1993, pp. 177-86.
27. P.L. Martin: Proc. ISGTA-I, TMS-AIME, Warrendale, PA, 1995, pp. 727-36.
28. J.W. Edington: Metall. Trans. A, 1982, vol. 13A, pp. 703-15.
29. T.G. Langdon: Metall. Trans. A, 1982, vol. 13A, pp. 689-701.
30. D.A. Woodford: Trans. ASM, 1969, vol. 62, pp. 291-98.
31. T.G. Langdon: Scripta Metall, 1977, vol. 11, pp. 997-1003.
32. S.L. Semiatin and G.D. Lahoti: Metall. Trans. A, 1981, vol. 12A, pp. 1705-17.
33. P. Dadras and J.F. Thomas, Jr.: Metall. Trans. A, 1981, vol. 12A, pp. 1867-73.
34. C.M. Young and O.D. Sherby: in Metal Forming-Interrelation between Theory and Practice, A.L. Hoffrnanner, ed., Plenum Press, New York, NY, 1971, pp. 429-51.
35. R.L. Athey and J.B. Moore: Powder Metallurgy for High Performance Applications, Proc. 18th Sagamore Army Materials Research Conf., J.J. Burke and V. Weiss, eds., Syracuse University Press, New York, NY, 1972, pp. 281-301.
36. L.N. Moskowitz, R.M. Pelloux, and N. Grant: SuperalloysProcessing, Proc. 2nd Int. Conf., MCIC Report No. 72-10, Section Z, Metals and Ceramics Information Center, Battelle's Columbus Laboratories, Columbus, OH, 1972.
37. INCO International Data Book, High-Temperature, High-Strength, Ni-Base Alloys, The International Nickel Company, Inc., New York, NY, 1977.
38. J.P.A. Immarigeon and O.H. Floyd: Metall. Trans. A, 1981, vol. 12A, pp. 1177-86.
39. T.E. Howson, W.H. Couts, Jr., and J.E. Coyne: Proc. Superalloys 1984, TMS-AIME, Warrendale, PA, 1984, pp. 275-84.
40. C. Koeppe, A. Bartels, H. Clemens, P. Schretter, and W. Glatz: Mater. Sei. Eng., 1995, vol. A201, pp. 182-93.