Laboratory studies of erosion-corrosion processes under oxidising and oxidising/ sulphidising conditions

Materials at High Temperatures

Volumn 14, Issue 3, 1997, Pages 289-306

  Nicholls, J R ^a  

^a CRANFIELD UNIVERSITY   (United Kingdom)

Author keywords

Coal fired power generation; Erosion corrosion processes; Oxidising and sulphidising conditions

Indexed keywords

COAL FIRED BOILERS; COAL GASIFICATION PLANTS; CORROSIVE EFFECTS; EROSION; FLUIDIZED BED COMBUSTORS; OXIDATION; SULFONATION;

CORROSION TEST; SULFIDATION;

CORROSION;

EID: 0031360115     PISSN: 09603409     EISSN: None     Source Type: Journal    
DOI: 10.1080/09603409.1997.11689555     Document Type: Article

References (128)

1. Stringer, J. and Wright, I. G. J. Mater. Energy Syst 8, 319-331 (1986).
2. Anderson, J., Carls, E. L., Mainhardt, D. T., Swift, W. M., Wheeldon, J. M., Brooks, S., Minchener, A. J. and Stringer, J. Trans. ASME, J. Eng. Gas Turbines Power 109, 298-304 (1987).
3. Raask E. Erosion Wear in Coal Utilisation. Hemisphere (1988).
4. Stringer, J. Wear 186-7, 11-27 (1995).
5. Wright, I. G. Materials at High Temperature, this issue pxx-yy (1997).
6. Levy A. (ed.) Corrosion-Erosion of Coal Conversion System Materials Berkeley, USA (1979).
7. Field, J. E. 5th Int., Conf on Erosion by Liquid and Solid Impacts ELSI V, Cambridge, England (1979).
8. Levy A. (ed.) Conf on Corrosion-Erosion-Wear of Materials in Emerging Fossil Energy Systems, Berkeley, USA (1982).
9. Field J. E. and Corney N. S. (eds) 6th Int. Conf. on Erosion by Solid and Liquid Impact ELSI VI, Cambridge, England (1983).
10. Levy A. (ed.) Conf on Corrosion-Erosion-Wear of Materials at Elevated Temperatures. Berkeley, USA (1986).
11. J. P. Mouston (ed.) Proc. 9th Int. Conf. on Fluidised-Bed Combustion. ASTM, New York (1987).
12. Field J. E. and Dear J. P. (eds) 7th Int. Conf. on Erosion by Liquid ang Solid Impacts, ELSI VII, Cambridge, England (1987).
13. Manaker A. M. (ed.) Proc. 10th Int. Conf. on Fluidised Bed Combustion. ASME, New York (1989).
14. Levy A. (ed.) 2nd Int. Conf. on Corrosion-Erosion-Wear of Materials at Elevated Temperatures. Berkeley, USA, (1990).
15. Anthony E. J. (ed.) Proc. 11th Int. Fluidised Bed Combustion Conf. Clean Energy for the World. ASME, New York, (1991).
16. Norton J. F. and Bakker, W. T. Proc. 1st. Int. Workshop on Materials for Coal Gasification Power Plant Petten, Netherlands, published by Butterworth-Heinemann (1993).
17. Hutchings I. M. and Little J. A. (eds) 8th Int. Conf on Erosion by Solid and Liquid Impacts, ELSI VIII, published as Wear, 186 and 187 (1995).
18. A. J. Minchener in 5th Conf. on Materials for Coal Conversion and Utilisation. NBS, Gaithersburg USA (1980).
19. Minchener, A. J., Lloyd D. M. and Stringer J. Conf on Corrosion in Coal Conversion Systems. London, UK (1982).
20. Krause, H. H., Vaughan, D. A., Wright I. G. and Carlton, H. E. Materials Performance, pp. 52-58 (1982).
21. Rademakers, P. L. F., Bos, L., Van Wortel, J. C. and Kolster, B. H. in 3rd Int. Conf on Fluidised Combustion: is it achieving its promise. London, UK (1984).
22. Rademakers, P. L. F. and Kettunen, P. O. in Proc. Conf. High Temperature Alloys for Gas Turbines and Other Applications. Liege, Belgium (1986).
23. Minchener, A. J., Lloyds, D. M. and Stringer, J. in Proc. Int. Conf on Fluidised-Bed Combustion, pp. 812-819 J. P. Mustonen (ed.) ASME, (1987).
24. Anderson, J. S., Carls, E. L., Mainhardt, D. T., Swift, W. M., Wheeldon, J. M., Brooks, S., Minchener, A. J. and Stringer, J. Trans. ASME, J. Eng. for Gas Turbines and Power (1987).
25. Tossaint, H. H. J., Rademakers, P. L. F. and Van Norden, P. P. in Proc. EPRI Workshop on Wastage of In-Bed Surfaces in Fluidised Bed Combustors, Argonne USA (1987)
26. Witherall, C. E. in Proc. 10th Int. Conf. on Fluidised Bed Combustion, p. 937 A. M. Manaker (ed.), ASME, San Francisco (1989).
27. Holtzer, G. J. and Rademakers, P. L. F. in Proc. 1991 Conf on Fluidised Bed Combustion, pp. 743-753 E. J. Anthony (ed.) ASME, (1991).
28. Ninham, A. J., Entwisle, M. J., Hutchings, I. M. and Little J. A. in Proc. 10th Int. Conf on Fluidised Bed Combustion. pp. 583-590, A. M. Manaker (ed.) ASME, New York, (1989).
29. Ninham, A. J., Hutchings, I. M. and Little, J. A Corrosion 46, 296-301 (1990).
30. Ninham, A. J., Little, J. A., Hutchings, I. M., Meadowcroft, D. B., Aokui, J. and Simms, N. J. in Proc. Conf. on Erosion-Corrosion Wear of Materials at Elevated Temperatures A. V. Levy (ed.), NACE, (1990).
31. Hutchings, I. M., Little, J. A. and Ninham, A. J. in Proc. 4th Berkeley Conf on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, NACE (1991) paper 14.
32. Rogers, P. M., Hutchings, I. M. and Little, J. A. Wear, 154, 269-285 (1992).
33. Rogers, P. M. Hutchings, I. M. and Little, J. A. Wear 186-187. 238-246 (1995).
34. Rogers, P. M., Howes, T. E., Hutchings, I. M. and Little, J. A. Wear 186-187, 305-315, (1995).
35. Howes, T. E., Rogers, P. M., Little, J. A. and I.M. Hutchings, Wear 186-187, 316-324 (1995).
36. Jansson, S. A. Proc. EPRI Workshop on Fluidised-Bed Combustor Materials Issues. Port Hawkesbury, Nova Scotia (1985).
37. Stott, F. H., Green, S. W. and Wood, G. C. Mater Sci. Engg. A121, 611-617 (1989).
38. Scott, F. H., Stack, M. M., and Wood, G. C. Proc. Conf on Corrosion-Erosion-Wear of Materials at Elevated Temperatures. pp. 1-16. A. Levy (ed.), NACE, Houston, (1990).
39. Stack, M. M., Stott, F. H. and Wood, G. C. Mat. Sci. Tech. 7, 1128-1137 (1991).
40. Stack, M. M., Stott, F. H. and Wood, G. C. Corrosion Science 33, 965-983 (1992).
41. Stack, M. M., Stott, F. H. and Wood, G. C. J. de Phys IV, Colloq. C9, Suppl. 3, 687-694 (1993).
42. Chacon-Nava, J. G., Stott, F. H. and Stack, M. M. Corrosion Science 35, 1045-1051 (1993).
43. Stack, M. M., Chacon-Nava, J. G. and Stott, F. H. Mater. Sci. Tech, 11, 1180-1185 (1995).
44. Stack, M. M., Chacon-Nava, J. and Stott, F. H. Wear 180, 91-95 (1995).
45. Stott, F. H., Jordan, M. P., Lekatos, S., Stack, M. M. and Wood, G. C. Wear, 186-187, 291-298 (1995).
46. Hall D. J. and Saunders, S. R. J. Proc. Conf. High Temperature Materials for Power Engineering p. 157, E. Bachelet et al. (eds), Liege, 1, (1990).
47. Klower, J. Proc. 2nd Int. Conf. on Heat Resisting Materials, pp. 148-152 Gatlinburg, USA, (1995).
48. MacAdam, S. S., Stringer, J. and Levy, A. Proc. 10th Int. Conf on Fluidised Bed Combustion, A. M. Manaker (ed.) ASME, New York, p. 937 (1989).
49. MacAdam, S. S. and Stringer, J. Wear 135, 403 (1990).
50. MacAdam, S. S. and Stringer, J. in Corrosion/92 NACE, Opryland, paper 141 (1992).
51. MacAdam, S. S. and Stringer, J. Wear, 186-187, 325-331 (1995).
52. Stringer, J. and Wright, I. G. Proc. Workshop on Wastage of In-Bed Surfaces in Fluidised Bed Combustors, EPRI, Palo Alto, CA, Paper 1.1, (1987).
53. Corey, R. G. and Sethi, V. K. NACE-Corrosion '86 NACE, Houston, YX, paper no. 114 (1986)
54. Sethi, V. K., Corey, R. G. and Spencer, D. K. 3rd Berkeley Conf. on Corrosion-Erosion-Wear, A. Levy (ed.), Berkeley, (1986)
55. Sethi V. K. and Corey R. G. in Proc 7th Int. Conf. on Erosion of Solid and Liquid Impacts ELSI, I. E. Field and J. P. Dear (eds), Cambridge, UK, paper 73 (1987).
56. Wright, I. G., Sethi, V. K. and Stringer, J. Proc. 2nd Int. Conf. on Heat-Resistant Materials, pp. 127-135 Gatlinburg, Tenessee, (1995).
57. ASTM G76-89, Standard Practice for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets, ASTM, Philadelphia, (1992).
58. DIN 50332, Strahlverscheipprufing, DIN, Berlin (1984) (in German).
59. Burnett, A. J., De Silva, S. R. and Reed, A. R. Wear 186-7, 168-178 (1995).
60. Nicholls, J. R., Jaslier, Y. and Rickerby, D. S. Proc. Conf on High Temperature Corrosion and Protection of Materials, Les Embiez (1996).
61. D. J. Stephenson and J. R. Nicholls, Corrosion Science, 35, 1015-1026 (1993).
62. Stephenson, D. I, Nicholls, J. R. and Hancock, P. Wear, 111, 15-29 (1986).
63. Stephenson, D. J., Nicholls, J. R. and Hancock, P. Wear, 111, 31-39 (1986).
64. Hancock, P., Nicholls, J. R. and Stephenson, D. J. Surface and Coatings Technology, 32, 285-304 (1987).
65. Stephenson, D. J. and Nicholls, J. R. Plant Corrosion-Prediction of Materials Performance, pp. 313-324. J. E. Strutt and J. R. Nicholls (eds). Ellis Norwood Ltd, Chichester, England (1987).
66. Shipway, P. H. and Hutchings, I. M. Wear 174, 169-174 (1994).
67. Levy, A. V., Yan, J. and Patterson, J. Wear, 108, 43-60 (1986).
68. Levy, A. V. and Man, J. F. Wear, 111, 173-186 (1986).
69. Geny, G. Q., Hou, P. Y., Wang, B. Q. and Levy, A. V. Wear, 150, 89-105 (1991).
70. Wang, B. Q., Geny, G. Q. and Levy, A. V. Wear 150, 107-124 (1991).
71. Levy, A. V. and Crook, P. Wear 151, 337-350 (1991).
72. Liebhard, M. and Levy, A. V. Proc. 1st. Int. Conf. on Heat Resisting Materials, pp. 429-437. Fontana, Wisconsin, USA, (1991).
73. Wang, B. Q. and Geng, G. Q. Wear 155, 137-147 (1992).
74. Wright, I. G., Nagarajan, V. and Merz, W. E. EPRI, Report No. Cs3504 (1984).
75. Barkalow, H. and Pettit, F. S. Proc. 5th Conf on Erosion by Solid and Liquid Impacts, ELSI, Cambridge paper 44 (1979).
76. Barkalow, R. H. and Pettit, F. S. Proc. Conf on Corrosion/Erosion of Coal Conversion System Materials, pp. 139-163. Berkeley, USA, NACE, (1979).
77. Kang, C. T., Pettit, F. S. and Birks, N. Met. Trans. 18A, 1785, (1987).
78. Rishel, D. M., Pettit, F. S. and Birks, N. Proc. Conf on Corrosion-Erosion Wear of Materials at Elevated Temperatures, Levy, A.V. (ed.) NACE, Houston
79. Kang, C. T., Chang, S. L., Pettit, F. S. and Birks, N. Proc. Conf on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, pp. 61-76. A.V.Levy (ed.), NACE, Houston, (1991).
80. Peterson, B., Rishel, D. M., Birks, N. and Pettit, F. S. Wear 186-7, 56-63 (1995).
81. Zhou, J. and Bahadur, S. Proc. Conf on Corrosion and Particle Erosion at High Temperatures, pp. 315-333. V. Srinivasan and K. Vedula (eds) TMS-AMS Warrendale, (1989).
82. Zhou, J. and Bahadur, S. Proc. Conf. on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, 13.1-13.32 A. V. Levy (ed.), NACE, Berkeley, Ca. (1991).
83. Chinnadurai, S. and Bahadur, S, Wear, 186-7, 299-305 (1995).
84. Restall, J. E. and Stephenson, D. J. Mater. Sci. Eng. 88, 273-282 (1987).
85. Nicholls, J. R. and Stephenson, D. J. Wear 186-7, 64-77 (1995).
86. Simms, N. J., Oakey, J. E., Stephenson, D. J., Smith P. and Nicholls, J. R. Wear, 186-7, 247-255 (1995).
87. Suckling, M. and Allen, C. Wear 186-7, 266-272, (1995).
88. Engman, U. Wear of Materials, p. 319. ASME, New York (1983).
89. Engman, U. Wear 186-7, 215-223 (1995).
90. Tilly, G. P. Wear 14, 63 (1969).
91. Tilly G. P. and Sage, W. Wear U16U, 447 (1970).
92. Tilly, G. P. Wear 23, 87 (1973).
93. Stott, F. H., Lekatos, S., Jordan, M. P., Wood, G. C., and Stack, M. S. Materials and Corrosion 46, 261-270 (1995).
94. Stott, F. H., Jordan, M. P., Lekatos, S., Stack, M. M. and Wood, G. C. Wear 186-7, 291-298 (1995).
95. Oakey, J. E., Simms, N. J., Nicholls, J. R., Stephenson, D. J., Stott, F. H., Persoon, R., Saunders S., R. J., and Norton, J. F. Erosion/Corrosion of Advanced Materials for Coal-Fired Combined Cycle Power Generation Summary Report, JOUF-0022, Commission of European Communities (1994).
96. Hamzah, R., Stephenson, D. J. and Strutt, J. E. Wear 186-7, 493-496 (1995).
97. Oakey, J. E., Simms, N. J., Fantom, I. R., and Nicholls, J. R. in Materials for Advanced Power Engineering, Part II D. Cousouradis et al. (eds), 1453-1466, Kluwer Academic Publishers, Netherlands (1994).
98. McCarron, R. L. and Grey, D. A. Review of the information of gas turbine materials in coal combustion environments. EPRI Rep. CS-1469, Electric Power Research Institute (1980).
99. Davidson, B. J., Meadowcroft, D. B. and Stringer, J. High Temperature Alloys for Gas Turbines and Other Applications, pp. 219-244. W. Betz et al. (ed.), Reidel Publishers, (1986)
100. Meadowcroft, D. B. and Stringer, J. Mat. Sci. Tech., 3, 562 (1987).
101. Hamed, A. and Tabakoff, W. Proc. 7th Int. Conf. on Erosion by Liquid and Solid Impacts Paper 77. ELSI, J. E. Field and J. P. Dear (eds) Cambridge, England (1987).
102. Tabakoff, W. and Hamed, A. Proc. 6th Int. Conf on Erosion by Solid and Liquid Impacts, paper 54 ELSI, Cambridge, UK (1983).
103. Hancock, P. and Nicholls, J. R. Int. Conf. on Metallurgical Coatings, San Diego, USA (1980).
104. Hancock P. and Nicholls J. R. 2nd Int. Conf on Advanced Materials for Alternate Fuel Capable Heat Engines, Monterey, USA EPRI, RD-2369-SR(1981).
105. Saunders, S. R. J. and Nicholls, J. R. Thin Solid Films 119, 247-269 (1984).
106. Nicholls, J. R., Stephenson, D. J., Hancock, P., Wood, M. I and Restall, J. E. in US/UK Workshop on Gas Turbine Materials in a Marine Environment, session II, paper (1984).
107. Stephenson, D. J., Nicholls, J. R. and Hancock, P. Corrosion Science 26, 757-767 (1986).
108. Nicholls, J. R. and Saunders, S. R. J. High Temperature Technology 7, 193-201 (1989).
109. Tabakoff, W. and Wakeman T. in Conf. on Erosion-Prevention and Useful Applications, pp. 123-135. ASTM STP664, (1979).
110. Tabakoff, W. Hamed, A. and Ramachandran, J. J. Engg. Power 102, 148-152 (1980).
111. Tabakoff, W. Proc. 7th Int. Conf. on Erosion by Solid and Liquid Impacts, ELSI, Cambridge, UK, Paper 52 (1987).
112. W. Tabakoff, Prof 6th Int. Conf. on Erosion of Solid and Liquid Impacts, ELSI, Cambridge, UK paper 55 (1983).
113. W. Tabakoff, Surf. Coatings Tech. 52, 65-79 (1992).
114. W. Tabakoff, Wear 186-7, 224-229, (1995).
115. Ratzer-Scheibe H. J. in Materials for Advanced Power Engineering, D. Coutsouradis et al. (eds). Kluwer Academic, Netherlands part II, 1243-1252.
116. Kolkman, H. J. Werkstoffe und Korrosion 33, 546 (1982).
117. Kolkman H. J. Proc. 6th Int. Conf on Erosion by Solid and Liquid Impacts ELSI, Cambridge, UK paper 45. (1983).
118. Lowell, C. E., Levine, S. R. and Grisaffe, S. J. Proc. Conf on Gas Turbine Materials in a Marine Environment MCIC-75-27, 535-554 (1974).
119. Donachie, M. J., Sprague, R. A., Russell, R. N., Boll, K. G. and Bradley, E. F. ASTM 421 85-104 (1967).
120. Goebel, J. A., Felten, E. J. and Pettit, F. S. Proc. Conf on Gas Turbine Materials in a Marine Environment, MCIC-75-27, pp. 93-114 (1974).
121. Corey, R. G., Barkalow, R. H., Khan, A. S. and Hecht, R. J. Proc. 2nd Conf. on Advanced Materials for Alternate-Fuel-Capable Heat Engines, EPRI, RD-2369-SR, paper 7.17-27 (1982).
122. Celland, J., Taylor A. F., and Wartley, L. in Proc. Conf. on Gas Turbine Materials in a Marine Environment pp. 397-428. MCIC-75-27, (1974).
123. Goebel, J. A., Giggins, C. S., Krasij, M. and Stringer, J. Proc. 2nd Conf on Advanced Materials for Alternate-Fuel-Capable Heat Engines, paper 7.1-16. EPRI RD-2369-SR, (1982).
124. Oakey, J. E. Private communication (1997).
125. Stephenson, D. J. and Nicholls, J. R. Wear 186-7, 284-290 (1995).
126. Stack, M. M. Lekatos, S. Stott, F. H. Tribology International 28 445-451 (1995).
127. Sundararajan, G. Proc. Conf. Corrosion-Erosion-Wear of Materials at Elevated Temperatures, paper 11.1-33. A. Levy (ed.) Berkeley USA, NACE (1990).
128. Sethi, V. H. and Wright, I. G. A Description of Erosion-Oxidation Based on Scale Removal and Regrowth' ibid, paper 18 (or Observations on the Erosion Oxidation Behaviour of Alloys' pp. 245-263 in Corrosion and Particle Erosion at High Temperatures, V, Srinivasan and K. Vedule, (eds)., TMS Warrendale, PA (1989).