Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced AI composite

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 12, 1997, Pages 2741-2753

  Shi, N ^a   Bourke, M A M ^b   Roberts, J A ^a   Allison, J E ^c  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b IBM   (United States)

^c FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; DIFFUSION IN SOLIDS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); MORPHOLOGY; NEUTRON DIFFRACTION; RESIDUAL STRESSES; STRAIN MEASUREMENT; STRESS RELAXATION; THERMAL STRESS; TITANIUM CARBIDE;

HOOKE'S LAW; LATTICE ELASTIC MEAN PHASE (LEMP) STRAIN; PARTICULATE REINFORCED ALUMINUM COMPOSITE;

METALLIC MATRIX COMPOSITES;

EID: 0031352406     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0031-8     Document Type: Article

References (41)

1. H.C. Cox: Br. J. Appl. Phys., 1952, vol. 3, pp. 72-79.
2. A. Dollar and P. Steif: Int. J. Solids Struct., 1988, vol. 24, pp. 789-803.
3. D.C. Dunand and A. Mortensen: Acta Metall. Mater., 1991, vol. 39, pp. 1405-16.
4. S.J. Zhou and W.A. Curtin: Acta Metall. Mater., 1995, vol. 43, pp. 3093-3104.
5. K. Tanaka and T. Mori: Acta Metall, 1970, vol. 18, pp. 931-41.
6. P.J. Withers, W.B. Stobbs, and O.B. Pedersen: Acta Metall., 1989, vol. 37, pp. 3061-84.
7. J.D. Eshelby: Proc. R. Soc. Ser. A, 1957, vol. 241 A, pp. 376-96.
8. N. Shi and R.J. Arsenault: Ann. Rev. Mater. Sci., 1994, vol. 24, pp. 321-57.
9. R.J. Arsenault, L. Wang, and C.R. Feng: Acta Metall. Mater., 1991, vol. 39, pp. 47-57.
10. S.V. Kamat, J.P. Hirth, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 2395-2402.
11. T. Christman, A. Needleman, and S. Suresh: Acta Metall, 1989, vol. 37, pp. 3029-50.
12. W.S. Miller and F.J. Humphreys: Scripta Metall, 1991, vol. 25, pp. 33-38.
13. J. Llorca, A. Martin, J. Ruiz, and M. Elices: Metall. Trans. A, 1991, vol. 22A, pp. 1575-88.
14. R.J. Arsenault and M. Taya: Ada Metall., 1987, vol. 35, pp. 651-59.
15. A.J. Alien, M.T. Hutchings, C.G. Windsor, and C. Andreani: Adv. Phys., 1985, vol. 34, pp. .445-73.
16. D.S. Kupperman: Ann. Rev. Mater. Sci., 1994, vol. 24, pp. 265-91.
17. I.C. Noyan and J.B. Cohen: Residual Stress-Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987.
18. N. Shi, R.J. Arsenault, A.D. Krawitz, and L.F. Smith: Metall. Trans. A, 1993, vol. 24A, pp. 187-96.
19. P.B. Prangnell, T. Downes, P.J. Withers, and T. Lorentzen: Mater. Sci. Eng., 1995, vol. 197A, pp. 215-21.
20. A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361-73.
21. G.L. Povirk, M.G. Stout, M.A.M. Bourke, J.A. Goldstone, A.C. Lawson, M. Lovato, S.R. Nutt, and A. Needleman: Acta Metall. Mater., 1992, vol. 40, pp. 2391-2412.
22. R.K. Viswanadham, S.K. Mannan, and B. Sprissler: Annual Report of Martin Marietta Lab, MML TR 87-66C, Martin Marietta Corporation, Bethesda, MD, 1987.
23. G.M. Vyletel, D.C. Van Aken, and J.E. Allison: Scripta Metall. Mater., 1991, vol. 25, pp. 2405-10.
24. R. Mitra, M.E. Fine, and J.R. Weertman: J. Mater. Res., 1993, vol. 8, pp. 2370-79.
25. Measurement of Residual and Applied Stress Using Neutron Diffraction, M.T. Hutchings and A.D. Krawitz, eds. NATO ASI Series 216E, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1992.
26. R.B. von Dreele, J.D. Jorgenen, and C.G. Windsor: J. Appl. Crystallogr., 1982, vol. 15, pp. 581-89.
27. Z. Hashin and B.W. Rosen: J. Appl. Mech., 1964, vol. 31, pp. 223-32.
28. Y.L. Shen, M. Finot, A. Needleman, and S. Suresh: Ada Metall. Mater., 1994, vol. 42, pp. 77-97.
29. Metals Handbook, Vol. 2-Properties and Selection: Nonferrous Alloys and Pure Metals, ASM, Metals Park, OH, 1979, pp. 86-88.
30. CRC Materials Science and Engineering Handbook, 2nd ed., J.F. Shackelford, W. Alexander, and J.S. Park, eds., CRC Press, Boca Raton, FL, 1994.
31. M.A.M. Bourke: LORD Progress Report No. LA-13110-PR, Los Alamos National Laboratory, Los Alamos, NM, 1995, pp. 168-70.
32. ABAQUS/Standard User's Manual, v. 5.5, Hibbitt, Karlsson & Sorensen, Inc., Providence, RI, 1995.
33. L.F. Smith, A.D. Krawitz, P. Clarke, S. Saimoto, N. Shi, and R.J. Arsenault: Mater. Sci. Eng., 1992, vol. A159, pp. L13-L15.
34. T. Ericsson, J.L. Lebrun, P. Sainfort, B. Chenal, and P. Jarry: 2nd Int. Conf. on Residual Stresses, G. Beck, S. Denis, and A. Simon, eds., Eisevier Science Publishers Ltd., London, 1989, pp. 561-67.
35. L.C. Davis and J.E. Allison: Metall. Trans. A, 1993, vol. 24A, pp. 2487-96.
36. A.S. Khan and S. Huang: Continuum Theory of Plasticity, John Wiley & Sons, Inc., New York, NY, 1995, pp. 157-58.
37. J. Rosier, G. Bao, and A.G. Evans: Acta Metall. Mater., 1991, vol. 39. pp. 2733-38.
38. Y.L. Shen, M. Finot, A. Needleman, and S. Suresh: Acta Metall. Mater., 1995, vol. 43, pp. 1701-22.
39. N. Shi, B. Wilner, and R.J. Arsenault: Acta Metall. Mater., 1992, vol. 40. pp. 2841-54.
40. N. Shi: Los Alamos National Laboratory, Los Alamos, NM, unpublished results, 1996.
41. N. Shi, M.A.M. Bourke, J.A. Roberts, and J.E. Allison: in Modeling of Composites, S.P. Chen and M.P. Anderson, eds., TMS, Warrendale, PA, 1996, pp. 47-56.