Nonlinear kinematic hardening rule parameters - Direct determination from completely reversed proportional cycling

International Journal of Plasticity

Volumn 13, Issue 6-7, 1997, Pages 633-668

  Moosbrugger, J C ^a   Morrison, D J ^a  

^a Clarkson University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

MATHEMATICAL MODELS; NONLINEAR EQUATIONS; PLASTICITY; STRESSES; VISCOPLASTICITY;

NONLINEAR KINEMATIC HARDENING; PROPORTIONAL CYCLING;

KINEMATICS;

EID: 0031351799     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(97)00031-4     Document Type: Article

References (59)

1. Abdul-Latif, A., Clavel, M., Ferney, V. and Saanouni, K. (1994) On the modeling of nonproportional cyclic plasticity of waspaloy. ASME J. Eng. Mat. Techn. 116, 35.
2. Armstrong, P. J. and Frederick, C. O. (1966) A Mathematical Representation of the Multiaxial Bauschinger Effect. C.E.G.B. RD/B/N 731.
3. Benallal, A. and Marquis, D. (1987) Constitutive equations for nonproportional elasto-viscoplasticity. ASME J. Eng. Mat. Tech. 109, 326.
4. Bower, A. F. (1989) Cyclic hardening properties of hard-drawn copper and rail steel. J. Mech. Phys. Solids 37, 455.
5. Chaboche, J. L. (1977) Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of solids. Bul. de l'Acad. Pol. des Sci., Ser. Sci. et Tech. 25, 33.
6. Chaboche, J. L. (1989a) A New Constitutive Framework to Describe Limited Ratchetting Effects. Proc. Plasticity '89, Pergammon Press.
7. Chaboche, J. L. (1989e) Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5, 247.
8. Chaboche, J. L. (1991) On some modifications of kinematic hardening to improve the description of ratchetting effects. Int. J. Plasticity 7, 661.
9. Chaboche, J. L. (1993) Cyclic viscoplastic constitutive equations, part I: a thermodynamically consistent formulation. ASME J. Appl. Mech. 60, 813.
10. Chaboche, J. L. and Nouailhas, D. (1989a) Constitutive modeling of ratchetting effects - part I: experimental facts and properties of classical models. ASME J. Eng. Mat. Tech. 111, 384.
11. Chaboche, J. L. and Nouailhas, D. (1989e) Constitutive modeling of ratchetting effects-part II: possibilities of some additional kinematic rules. ASME J. Eng. Mat. Tech. 111, 409.
12. Chaboche, J. L. and Roussellier, G. (1983) On the plastic and viscoplastic constitutive equations - part I: rules developed with internal variable concept. ASME J. Pres. Ves. Tech. 105, 159.
13. Chaboche, J. L., Dang-Van, K. and Cordier, G. (1979) Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. Proc. of 5th Int. Conf. on Struc. Mech. In Reactor Techn., Berlin, L11 (3).
14. Chan, K. S., Bodner, S. R. and Lindholm, U. S. (1988) Phenomenological modeling of hardening and thermal recovery in metals. ASME J. Eng. Mat. Tech. 110, 1.
15. Doong, S. H. and Socie, D. F. (1991) Constitutive modeling of metals under nonproportional cyclic loading. ASME J. Eng. Mat. Techn. 113, 23.
16. Drucker, D. C. and Palgen, L. (1981) On stress-strain relations suitable for cyclic and other loading. ASME J. Appl. Mech. 48, 479.
17. Jiang, Y. and Sehitoglu, H. (1994a) Cyclic ratchetting of 1070 under multiaxial stress state. Int. J. Plasticity 10, 579.
18. Jiang, Y. and Sehitoglu, H. (1994e) Multiaxial ratchetting under multiple step loading. Int. J. Plasticity 10, 849.
19. Jiang, Y. and Sehitoglu, H. (1996a) Modeling of cyclic ratchetting plasticity, part I: development of constitutive relations. ASME J. Appl. Mech. 63, 720.
20. Jiang, Y. and Sehitoglu, H. (1996b) Modeling of cyclic ratchetting plasticity, part II: comparison of model simulations with experiments. ASME J. Appl. Mech. 63, 726.
21. Kanazawa, K., Brown, M. W. and Miller, K. J. (1979) Cyclic deformation of 1% Cr-Mo-V steel under out-of-phase loads. Fat. Eng. Mat. Struc. 2, 217.
22. Krempl, E. and Lu, H. (1984) The hardening and rate-dependent behavior of fully annealed aisi type 304 stainless steel under in phase and out-of-phase strain cycling at room temperature. ASME J. Eng. Mat. Tech. 106, 376.
23. Kuhlmann-Wilsdorf, D. and Laird, C. (1979) Dislocation behavior in fatigue II. Friction stress and back stress as inferred from an analysis of hysteresis loops. Mater. Sci. Eng. 37, 111.
24. Kurtyka, T. and Zyczkowski, M. (1996) Evolution equations for distorsional plastic hardening. Int. J. Plasticity 12, 191.
25. Lamba, H. S. and Sidebottom, O. M. (1978) Cyclic plasticity for nonproportional paths: part 1 - cyclic hardening, erasure of memory, and subsequent strain hardening effects. ASME J. Eng. Mat. Tech. 100, 96.
26. Lubliner, J. (1990) Plasticity Theory, Macmillan, New York.
27. Mahnken, R. and Stein, E. (1996) Parameter identification for viscoplastic models based on anaytical derivatives of a least-squares functional and stability investigations. Int. J. Plasticity 12, 451.
28. Marquis, D. (1979) Etude theorique et verification experimentale d'un modèle de plasticité cyclique. Thèse, Université Paris VI.
29. McDowell, D. L. (1983) On the path dependence of transient hardening and softening to stable states under complex biaxial cyclic loading. Proc. of Int. Conf. on Constitutive Laws for Eng. Mat., Tuscon, AZ.
30. McDowell, D. L. (1985) An experimental study of the structure of constitutive equations for nonproportional cyclic plasticity. ASME J. Eng. Mat. Tech. 107, 307.
31. McDowell, D. L. (1987) An evaluation of recent developments in hardening and flow rules for nonproportional cyclic plasticity. ASME J. Appl. Mech. 54, 323.
32. McDowell, D. L. (1992) A nonlinear kinematic hardening theory for cyclic thermoplasticity and thermoviscoplasticity. Int. J. Plasticity 8, 695.
33. McDowell, D. L. (1995) Stress state dependence of cyclic ratchetting behavior of two rail steels. Int. J. Plasticity 11, 397.
34. McDowell, D. L. and Miller, M. P. (1992) Stress state dependence of finite strain inelasticity. In Microstructural Characterization in Constitutive Modeling of Metals and Granular Media, Vol. 32, p. 27. ASME MD.
35. McDowell, D. L. and Moosbrugger, J. C. (1992) Continuum slip foundations of elasto-viscoplasticity. Acta Mechanica 93, 73.
36. Miller, M. P. and McDowell, D. L. (1996) The effect of stress state on the large strain inelastic deformation behavior of 304L stainless steel. ASME J. Eng. Mat. Techn. 118, 28.
37. Moosbrugger, J. C. (1988) A rate-dependent bounding surface model for nonproportional cyclic viscoplasticity. Ph. D. thesis, Georgia Institute of Technology, Atlanta, GA.
38. Moosbrugger, J. C. (1991) Some developments in the characterization of material hardening and rate sensitivity for cyclic viscoplasticity models. Int. J. Plasticity 7, 405.
39. Moosbrugger, J. C. (1992) Nonisothermal constitutive model for the small strain behavior of 9Cr-1Mo-V-Nb pressure vessel steel. ASME J. Eng. Mat. Techn. 114, 354.
40. Moosbrugger, J. C. (1993) Experimental parameter estimation for nonproportional cyclic viscoplasticity: nonlinear kinematic hardening rules for two waspaloy microstructures at 650°C. Int. J. Plasticity 9, 345.
41. Moosbrugger, J. C. and McDowell, D. L. (1989) On a class of kinematic hardening rules for nonproportional cyclic plasticity. ASME J. Eng. Mat. Tech. 111, 87.
42. Moosbrugger, J. C. and McDowell, D. L. (1990) A rate-dependent bounding surface model with a generalized image point for cyclic nonproportional viscoplasticity. J. Mech. Phys. Sol. 38, 627.
43. Morrison, D. J. and Moosbrugger, J. C. (1996) Effects of grain size on cyclic plastcity and fatigue crack initiation in nickel, accepted for Int. J. Fatigue (in press).
44. Moosbrugger, J. C. and Morrison, D. J. (1996) Nonlinear kinematic hardening rule parameters-relationship to substructure evolution in polycrystalline nickel. In preparation for Int. J. Plasticity.
45. Morrison, D. J. and Chopra, V. (1994) Cyclic stress-strain response of polycrystalline nickel. Mat. Sci. Eng. A177, 29.
46. Morrison, D. J. (1994) Influence of grain size and texture on the cyclic stress-strain response of nickel. Mat. Sci. Eng. A187, 11.
47. Mughrabi, H. (1981) Cyclic plasticity of matrix and persistent slip bands in fatigued metals. In Continuum Models of Discrete Systems 4, p. 241. North-Holland, Amsterdam.
48. Nouailhas, D. and Chaboche, J. L. (1991) Anisotropic constitutive modeling for single crystal superalloys using a continuum phenomenological approach. TIRE A PART No. 1991-6, Office Nationale d'Etudes et de Recherches Aerospatiales, France.
49. Nouailhas, D. and Culie, J.-P. (1991) Development and application of a model for single crystal superalloys. TIRE A PART No 1991-214, Office Nationale d'Etudes et de Recherches Aerospatiales, France.
50. Nouailhas, D. and Freed, A. D. (1992) A viscoplastic theory for anisotropic materials. ASME J. Eng. Mat. Techn. 114, 97.
51. Ohno, N. (1982) A constitutive model of cyclic plasticity with a non-hardening strain region. ASME J. Appl. Mech. 49, 721.
52. th Int. Conf. on Struc. Mech. in Reactor Techn., Tokyo, L22/1.
53. Ohno, N. and Wang, J.-D. (1991b) Transformation of a nonlinear kinematic hardening rules to a multisurface form under isothermal and nonisothermal conditions. Int. J. Plasticity 7, 879.
54. Ohno, N. and Wang, J.-D. (1993) Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior. Int. J. Plasticity 9, 375.
55. Ohno, N. and Wang, J.-D. (1993) Kinematic hardening rules with critical state of dynamic recovery, part II: applications to experiments of ratchetting behavior. Int. J. Plasticity 9, 391.
56. Pedersen, O. B. (1990) Mechanism maps for cyclic plasticity and fatigue of single phase materials. Acta. Metall. Mater. 38, 1221.
57. Phillips, A. and Lu, W.-y. (1984) An experimental investigation of yield surfaces and loading surfaces of pure aluminum with stress-controlled and strain-controlled paths of loading. ASME J. Eng. Mat. Techn. 106, 349.
58. Shrivistava, S. C., Jonas, J. J. and Canova, G. (1982) Equivalent strain in large deformation torsion testing: theoretical and practical considerations. J. Mech. Phys. Solids 30, 75.
59. Wang, J. -D. and Ohno, N. (1991) Two equivalent forms of nonlinear kinematic hardening: application to non-isothermal plasticity. Int. J. Plasticity 1, 637.