Fracture toughness of type 304 and 316 stainless steels and their welds

International Materials Reviews

Volumn 42, Issue 2, 1997, Pages 45-82

  Mills, W J ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; CRACKS; FRACTURE MECHANICS; FRACTURE TOUGHNESS; HEAT AFFECTED ZONE; MICROSTRUCTURE; NEUTRON IRRADIATION; STATISTICAL METHODS; THERMAL EFFECTS; WELDS;

STAINLESS STEEL 304; STAINLESS STEEL 316;

STAINLESS STEEL;

EID: 0031347334     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/imr.1997.42.2.45     Document Type: Review

References (190)

1. W. J. MILLS: J. Test. Eval., 1981, 9, 56-62.
2. J. N. ROBINSON: Int. J. Fract., 1976, 12, 723-737.
3. J. N. ROBINSON and A. S. TETELMAN: in 'Fracture toughness and slow-stable cracking', STP 559, 139-158; 1974, Philadelphia, PA, ASTM.
4. C. G. CHIPPERFIELD: Int. J. Fract., 1976, 12, 873-886.
5. S. A. PARANJPE and S. BANERJEE: Eng. Fract. Mech., 1979, 11, 43-53.
6. P. H. DAVIES: in 'Elastic-plastic fracture: Second symposium', Vol. II 'Fracture resistance curves and engineering applications', STP 803, II-611-II-631; 1983, Philadelphia, PA, ASTM.
7. D. T. READ and R. P. REED: in 'The metal science of stainless steel', (ed. E. W. Collings and H. W. King), 92-121; 1979, New York, AIME.
8. H. KOBAYASHI, H. NAKAMURA, and H. NAKAZAWA: in 'Elastic-plastic fracture: Second symposium', Vol. II 'Fracture resistance curves and engineering applications', STP 803, II-420-II-438; 1983, Philadelphia, PA, ASTM.
9. M. I. de VRIES and B. SCHAAP: in 'Elastic-plastic fracture test methods: The user's experience', STP 856, 183-195; 1985, Philadelphia, PA, ASTM.
10. N. NAKAJIMA, S. SHIMA, H. NAKAJIMA, and T. KONDO: Nucl. Eng. Des., 1986, 93, 95-106.
11. G. T. M. JANSSEN, J. V. D. EIKHOFF, and H. J. M. van RONGEN: in 6th Int. Conf. on 'Structural mechanics in reactor technology', Paris, 1981, International Association for Structural Mechanics in Reactor Technology, Vol. L, Paper L5/2; North-Holland.
12. G. S. KRAMER and V. PAPASPYROULOS: in 'Nonlinear fracture mechanics', Vol. II 'Elastic-plastic fracture', STP 995, 433-453; 1989, Philadelphia, PA, ASTM.
13. W. J. MILLS: J. Pressure Vessel Technol. (Trans. ASME), 1987, 109, 440-448.
14. P. BALLADON, J. HERITIER, and P. RABBE: in 'Fracture mechanics: Fourteenth symposium', STP 791, II-496-II-513; 1983, Philadelphia, PA, ASTM.
15. P. BALLADON, J. HERITIER, and C. JARBOUI: in 'Fracture mechanics: Sixteenth symposium', STP 868, 293-307; 1985, Philadelphia, PA, ASTM.
16. P. BALLADON and J. HERITIER: in 'Fracture mechanics: Seventeenth volume', STP 905, 661-682; 1986, Philadelphia, PA, ASTM
17. F. FAURE, p. OULD, and p. BALLADON: in 'International trends in welding science and technology', 563-568; 1993, Materials Park, OH, ASM International.
18. R. A. HAYS, M. G. VASSILAROS, and J. P. GUDAS: in 'Fracture mechanics: Eighteenth symposium', STP 945, 134-150; 1988, Philadelphia, PA, ASTM.
19. W. J. MILLS: in 'Fracture mechanics: Nineteenth symposium', STP 969, 330-355; 1988, Philadelphia, PA, ASTM.
20. W. J. MILLS: 'Effect of specimen size on the fracture toughness of type 304 stainless steel - interim report', Westinghouse Hanford Report HEDL-TME 81-52, Richland, WA, 1982.
21. R. M. HORN, H. S. MEHTA, W. R. ANDREWS, and S. RANGANATH: 'Evaluation of the toughness of austenitic stainless steel pipe weldments', EPRI NP-4668, Electric Power Research Institute, Palo Alto, CA, June 1986.
22. P. C. PARIS, H. TADA, A. ZAHOOR, and H. A. ERNST: in 'Elastic-plastic fracture', STP 668, 5-36; 1979, Philadelphia, PA, ASTM.
23. M. G. VASSILAROS, R. A. HAYS, and J. P. GUDAS: in Twelfth water reactor safety research information meeting', NUREG/CP-0058, 1984, Vol.4, 176-189, US Nuclear Regulatory Commission, Washington, DC.
24. D. E. MCCABE and W. A. LOGSDON: in Trans. 7th Int. Conf. on 'Structural mechanics in reactor technology', Chicago, IL, 1983, International Association for Structural Mechanics in Reactor Technology, Vol. E, Paper E8/4, 333-340; North-Holland.
25. G. M. WILKOWSKI, C. W. MARSCHALL, and M. P. LANDOW: in 'Fracture mechanics: Twenty-first symposium', STP 1074, 56-84; 1990, Philadelphia, PA, ASTM.
26. M. NAKAGAKI, C. W. MARSCHALL, and F. W. BRUST: in 'Nonlinear fracture mechanics'. Vol. II 'Elastic-plastic fracture', STP 995, 214-243; 1989, Philadelphia, PA, ASTM.
27. H. A. ERNST: in 'Elastic-plastic fracture: Second symposium', Vol.I 'Inelastic crack analysis', STP 803, I-191-I-213; 1983, Philadelphia, PA, ASTM.
28. P. K. LIAW and J. D. LANDES: in 'Fracture mechanics: Eighteenth symposium', STP 945, 622-646; 1988, Philadelphia, PA, ASTM.
29. W. H. CULLEN, A. L. HISER, J. R. HAWTHORNE, G. R. CASKEY, Jr, and G. A. ABRAMCZYK: in 'Properties of stainless steels in elevated temperature service', PVP-Vol. 132, 129-156; 1987, New York, ASME.
30. W. J. MILLS: Eng. Fract. Mech., 1988, 30, 469-492.
31. J. E. PAWEL, D. J. ALEXANDER, M. L. GROSSBECK, A. W. LONGEST, A. F. ROWCLIFFE, G. E. LUCAS, S. JITSUKAWA, A. HISHINUMA, and K. SHIBA: J. Nucl. Mater., 1994, 212-215, 442-447.
32. W. H. BAMFORD and J. A. BEGLEY: Techniques for evaluating the flaw tolerance of reactor coolant piping', Paper 76-PVP-48, New York, ASME, 1976.
33. W. H. BAMFORD and A. J. BUSH: in 'Elastic-plastic fracture', STP 668, 553-577; 1979, Philadelphia, PA, ASTM.
34. J. A. BEGLEY, A. A. SHEINKER, and W. K. WILSON: 'Crack propagation testing for LMFBR piping - Phase II final report', Westinghouse Research Report 76-8E7-Elbow-R2, 1976.
35. J. DUFRESNE, B. HENRY, and H. LARSSON: in 'Effects of radiation on structural materials', STP 683, 511-528; 1979, Philadelphia, PA, ASTM.
36. R. HERRERA and J. D. LANDES: 'Fracture mechanics: Twenty-first symposium', STP 1074, 24-43; 1990, Philadelphia, PA, ASTM.
37. M. F. KANNINEN, A. ZAHOOR, G. WILKOWSKI, I. ABOU-SAYED, C. MARSHALL, D. BROEK, S. SAMPATH, H. RHEE, and J. AHMAD: 'Instability predictions for circumferentially cracked type-304 stainless steel pipes under dynamic loading', Vol. 1, EPRI NP-2347, Battelle-Columbus Laboratories, 1982.
38. M. A. KHAN, T. SHOJI, H. TAKAHASHI, and H. NIITSUMA: in 'Elastic-plastic fracture: Second symposium', Vol. II 'Fracture resistance curves and engineering applications', STP 803, II-506-II-528; 1983, Philadelphia, PA, ASTM.
39. J. D. LANDES; in 'Proc. of US Nuclear Regulatory Commission CSNI specialists meeting tearing instability', Report NUREG/CP-0010, 194-225, 1979, US Nuclear Regulatory Commission, Washington, DC.
40. J. D. LANDES, D. E. McCABE, and H. A. ERNST: 'Elastic-plastic methodology to establish R curves and instability criteria', Eighth Semiannual Report, EPRI Contract No. RP1238-2, Westinghouse R&D Center, Pittsburgh, PA, July 1984.
41. R. L. SINDELAR, G. R. CASKEY, Jr, J. K. THOMAS, J. R. HAWTHORNE, A. L. HISER, R. A. LOTT, J. A. BEGLEY, and R. P. SHOGAN: in 'Effects of radiation on materials: 16th international symposium', STP 1175, 714-746; 1993, Philadelphia, PA, ASTM.
42. R. L. SINDELAR and G. R. CASKEY, Jr: in 'Microstructures and mechanical properties of aging materials', 361-369; 1993, Warrendale, PA, TMS.
43. G. M. WILKOWSKI, J. O. WAMBAUGH, and K. PRABHAT: in 'Fracture mechanics: Fifteenth symposium', STP 833, 553-576; 1984, Philadelphia, PA, ASTM.
44. G. M. WILKOWSKI, J. AHMAD, C. R. BARNES, F. BRUST, D. GUERRIERI, J. KIEFNER, G. KRAMER, G. KULHOWVICK, M. LANDOW, C. W. MARSCHALL, W. MAXEY, M. NAKAGAKI, P. PAPASPYROPOULOS, V. PASUPATHI, and P. SCOTT. 'Degraded piping program - phase II', NUREG/CR-4082, Vol. 4, Mar. 1986, US Nuclear Regulatory Commission, Washington, DC.
45. C. O. CHIPPERFIELD: in Proc. Int. Conf. on 'Dynamic fracture toughness; 1977, London, The Welding Institute and American Society for Metals.
46. C. G. CHIPPERFIELD: in Proc. Conf. Tolerance of flaws in pressurised components', 1978, C/92/8/78, 145; London, The Institution of Mechanical Engineers.
47. R. L. TOBLER: in 'Fourth Int. Conf. on Fracture', 839-845; 1977, Waterloo, University of Waterloo Press.
48. P. BALLADON: in 'Ductile fracture test methods', 110-114; 1983, Paris, Organization for Economic Cooperation and Development.
49. J. W. CARDINAL and M. F. KANNINEN: in "Nonlinear fracture mechanics', Vol. II 'Elastic-plastic fracture', STP 995, 320-329; 1989, Philadelphia, PA, ASTM.
50. M. I. de VRIES: 'Influence of radiation on material properties: 13th Int. Symp. (Part II)', STP 956, 162-173; 1986, Philadelphia, PA, ASTM.
51. W. J. MILLS, L. A. JAMES, and L. D. BLACKBURN: 'Results of fracture mechanics tests on PNC SUS 304 plate', Westinghouse Hanford Report HEDL-7544, Richland, WA, Aug. 1985.
52. W. J. MILLS: Nucl. Technol., 1988, 82, 290-303.
53. N. MIURA, K. KASHIMA, K. MICHIBA, and T. SHIMAKAWA: in 'Fatigue, fracture, and risk - 1991', PVP-Vol. 215, 81-86; 1991, New York, ASME.
54. P. SCOTT, R. J. OLSON, and G. M. WILKOWSKI: in 'Fatigue, flaw evaluation and leak-before-break assessments', 135-151:1994, New York, ASME.
55. P. SCOTT, R. J. OLSON, M. WILSON, and G. M. WILKOWSKI; in 'Fatigue, flaw evaluation and leak-before-break assessments', 183-197; 1994, New York, ASME.
56. J. BERNARD and G. VERZELETTI: in 'Effects of radiation on materials: Twelfth Int. Symp.', STP 870, 619-641; 1985, Philadelphia, PA, ASTM.
57. F. J. LOSS and R. A. GRAY, Jr: 'Toughness of irradiated type 316 forging and weld metal using the J integral', NRL Memorandum Report 2875, 23-30; Naval Research Laboratory, Washington, DC, July 1974.
58. I. J. O'DONNELL, H. HUTHMANN, and A. A. TRAVASSOLI: Int. J. Pressure Vessels Piping, 1996, 65, 209-220.
59. V. KUMAR, M. D. GERMAN, and C. F. SHIH: 'An engineering approach for elastic-plastic fracture analysis', EPRI Report NR-1931, Palo Alto, CA, July 1981.
60. V. KUMAR, M. D. GERMAN, W. W. WILKENING, W. R. ANDREWS, H. G. de LORENZI, and D. F. MOWBRAY: 'Advances in elastic-plastic fracture analysis', EPRI Report NR-3607, Palo Alto, CA, Aug. 1984.
61. V. KUMAR and M. D. GERMAN: 'Elastic-plastic fracture analysis of through-wall and surface flaws in cylinders', EPRI Report NR-5596, Palo Alto, CA, Jan. 1988.
62. A. ZAHOOR: 'Ductile fracture handbook', Vol. 1 'Circumferential throughwall cracks', EPRI Report NP-6301-D, Palo Alto, CA, June 1989.
63. P. C. PARIS and H. TADA: 'The application of fracture proof design methods using tearing instability theory to nuclear piping postulating circumferential through wall cracks', Report NUREG/CR-3464, Sept 1983, US Nuclear Regulatory Commission, Washington DC.
64. F. W. BRUST: 'Approximate methods for fracture analyses of through-wall cracked pipes', Report NUREG/CR-4853, Feb. 1987, US Nuclear Regulatory Commission, Washington, DC.
65. S. YUKAWA: in 'Fracture mechanics - applications and new materials', PVP-Vol. 260, 115-125; 1993, New York, ASME.
66. D. J. ALEXANDER, K. B. ALEXANDER, M. K. MILLER, and R. K. NANSTAD: in 'Microstructures and mechanical properties of aging materials', 263-269; 1993, Warrendale, PA, TMS.
67. D. J. ALEXANDER, K. B. ALEXANDER, M. K. MILLER, and R. K. NANSTAD: in 'Fatigue, degradation, and fracture - 1990', PVP-Vol. 195, 187-192; 1990, New York, ASME.
68. F. M. HAGGAG, W. R. CORWIN, and R. K. NANSTAD: Nucl. Eng. Design, 1990, 124, 129-141.
69. J. M. VITEK, S. A. DAVID, D. J. ALEXANDER, J. R. KEISER, and R. K. NANSTAD: Acta. Metall. Mater., 1991, 39, 503-516.
70. D. J. ALEXANDER, J. M. VITEK, and S. A. DAVID: in 'International trends in welding science and technology', 557-561; 1993, Materials Park, OH, ASM International.
71. B. JOSEFSSON and U. BERGENLID: J. Nucl. Mater., 1994, 212-215, 525-529.
72. A. B. POOLE, J. A. CLINARD, R. L. BATTISTE, and W. R. HENDRICH: Nucl. Eng. Design, 1994, 152, 57-65.
73. S. M. GRAHAM, W. R. LLOYD, and W. G. REUTER: in 'Elastic-plastic fracture test methods: The user's experience (second volume)', STP 1114, 213-224; 1991, Philadelphia, PA, ASTM.
74. F. M. HAGGAG: 'Effects of radiation on materials: 16th int. symp.', STP 1175, 363-370; 1993, Philadelphia, PA, ASTM.
75. D. E. McCABE: 'Fracture evaluation of surface cracks embedded in reactor vessel cladding', NUREG/CR-5207, Sept. 1988, US Nuclear Regulatory Commission, Washington, DC
76. D. J. ALEXANDER and G. M. GOODWIN. Adv. Cryogenic Eng. (Mater.), 1992, 38, 101-107.
77. G. M. GOODWIN: Weld. J., 1985, 64, 19-26.
78. H. I. McHENRY and T. A. WHIPPLE: 'Weldments for liquid helium service', Materials Studies for Magnetic Fusion Energy Applications at Low Temperatures III, Report NBSIR 80-1627; 155-165; 1980, Washington, DC, NBS.
79. T. A. WHIPPLE, H. I. MCHENRY, and D. T. READ: Weld. J., 1981, 60, 72s-78s.
80. T. A. WHIPPLE and D. J. KOTECKI: in 'Materials studies for magnetic fusion energy applications at low temperatures IV', Report NBSIR 81-1645, 303-321; 1981, Washington, DC, NBS.
81. C. N. McCOWAN and T. A. SIEWERT: Adv. Cryogenic Eng. (Mater.), 1988, 34, 335-342.
82. C. N. McCOWAN and T. A. SIEWERT: Adv. Cryogenic Eng. (Mater.), 1990, 36, 1331-1337.
83. 1-R curve characteristic of piping material and welds', Proc. US Nuclear Regulatory Commission Ninth Water Reactor Safety Research Information Meeting, NUREG/CP-0024, Mar. 1982., Washington, DC.
84. D. J. MICHEL and R. A. GRAY: in Proc. Conf. 'Environmental degradation of engineering materials III', Pennsylvania State University, PA, 1987, 619-626.
85. P. OULD, P. BALLADON, and Y. MEYZAUD: in Int. Colloq. on 'Stainless steels', Mons, Belguim, Bull. Cercle Etud. Métaux. 1988, 15, 31.1-31.12.
86. P. M. SCOTT and J. AHMAD: 'Experimental and analytical assessment of circumferentially surface-cracked pipes under bending'. NUREG/CR-4872, Apr. 1987, US Nuclear Regulatory Commission, Washington, DC.
87. T. A. WHIPPLE and H. I. MCHENRY: in 'Materials studies for magnetic fusion energy applications at low temperatures IV, Report NBSIR 81-1645, 273-287; 1981, Washington, DC, NBS.
88. T. A. SIEWERT and C. N. McCOWAN: Adv. Cryogenic Eng. (Mater.), 1992, 38, 109-115.
89. V. P. KUJANPAA, S. A. DAVID, and C. L. WHITE: Weld. J., 1987, 66, 221s-228s.
90. J. C. LIPPOLD, W. A. BAESLACK, III, and I. VAROL: Weld. J., 1992, 71, 1s-4s.
91. N. S. TSAI and T. W. EAGAR: J. Mater. Energy Systems, 1984, 6, 33-37.
92. W. J. MILLS: in 'Fracture mechanics: Perspectives and directions (Twentieth symposium)', STP 1020, 459-475; 1989, Philadelphia, PA, ASTM.
93. S. J. GARWOOD: in 'Fracture mechanics: Fifteenth symposium', STP 833, 333-359; 1984, Philadelphia, PA, ASTM.
94. F. H HUANG: Int. J. Fracture, 1984, 25, 181-193.
95. W. F. BROWN, Jr and J. E. SRAWLEY: in 'Plane strain crack toughness testing of high strength metallic materials', STP 410, 46-51; 1966, Philadelphia, PA, ASTM.
96. W. F. BROWN, Jr and J. E. SRAWLEY: in 'Review of developments in plane strain fracture toughness testing', STP 463, 216-248; 1970, Philadelphia, PA, ASTM.
97. J. G. KAUFMAN and P. E. SCHILLING: in 'Progress in flaw growth and fracture toughness testing', STP 536, 312-319; 1973, Philadelphia, PA, ASTM.
98. C. W. MARSCHALL, M. P. LANDOW, G. M. WILKOWSKI, and A. R. ROSENFIELD: Int. J. Pressure Vessels Piping, 1995, 62, 49-58.
99. K. J. STONER, R. L. SINDELAR, N. G. AWADALLA, J. R. HAWTHORNE, A. L. HISER, and W. H. CULLEN: in 'Fatigue, degradation, and fracture 1990', PVP-Vol. 195, 149-156; 1990, New York, ASME.
100. B. WEISS and R. STICKLER: Metall. Trans., 1972, 3, 851-866.
101. Y. MINAMI, H. KIMURA, and Y. IHARA: Mater. Sci. Technol., 1986, 2, 795-806.
102. J. M. VITEK and S. A. DAVID: Weld. J., 1986, 65, 106s-111s.
103. J. M. VITEK and S. A. DAVID: in 'Properties of stainless steels in elevated temperature service', PVP-Vol. 132, 157-171; 1987, New York, ASME.
104. P. J. GROBNER: Metall. Trans., 1973, 4, 251-260.
105. A TRAUTWEIN and W. GYSEL: in 'Stainless steel casting', STP 756, 165-189; 1982, Philadelphia, PA, ASTM.
106. M. K. MILLER, J. M. HYDE, M. G. HETHERINGTON, A. CEREZO, G. D. W. SMITH, and C. M. ELLIOTT: Acta Metall. Mater., 1995, 43, 3385-3401.
107. D. J. ALEXANDER and R. K. NANSTAD: in Proc. 7th Int. Symp. on 'Environmental degradation of materials in nuclear power systems - Water reactors', 747-758; 1995, Houston, TX, NACE.
108. J. A. HORAK, V. K. SIKKA, and D. T. RASKE: in Proc. International Atomic Energy Agency Specialists Meeting on 'Mechanical properties of structural materials including environmental effects', IWGFR-49, Chester, UK, 1983, Vol. 1, 179-213.
109. C. E. SPAEDER, Jr and K. G. BRICKNER: in 'Advances in the technology of stainless steels and related alloys', STP 369, 43; 1964, Philadelphia, PA, ASTM.
110. N. L. MOCHEL, C. W. AHLMAN, G. C. WIEDERSUM, and R. H. ZONG: in Proc. 'American power conference', 1966, Vol. 28, 556-568.
111. C. L. CLARK, J. J. B. RUTHERFORD, A. B. WILDER, and M. A. CORDOVI: J. Eng. Power (Trans. ASME), 1962, 258-288.
112. J. R. HAWTHORNE and H. E. WATSON: Weld. J., 1973, 255s-260s.
113. T. D. PARKER: in 'Source book on stainless steel', 80-99; 1976, Metals Park, OH, ASM.
114. J. J. SMITH and R. A. FARRAR: Int. Mater. Rev., 1993, 38, 25-51.
115. W. H. BAMFORD, E. I. LANDERMAN, and E. DIAZ: J. Eng. Mater. Technol., 1985, 107, 53-60.
116. P. J. MAZIASZ: J. Nucl. Mater., 1993, 205, 118-145.
117. P. J. MAZIASZ and C. J. MCHARGUE: Int. Mater. Rev., 1987, 32, 190-219.
118. F. A. GARNER: in 'Materials science and technology', (ed. R. W. Cahn et al.), Vol. 10A, 419-543; 1994, VCH Publishers.
119. E. E. BLOOM: in 'Radiation damage in metals', 295-329; 1976, Metals Park, OH, ASM.
120. M. L. GROSSBECK, P. J. MAZIASZ, and A. F. ROWCLIFFE: J. Nucl. Mater., 1992, 191-194, 808-812.
121. P. J. MAZIASZ: in 'MiCon 86: Optimization of processing, properties, and service performance through microstructural control', STP 979, 116-161; 1988, Philadelphia, PA, ASTM.
122. T. M. WILLIAMS: in 'Effects of radiation on materials: Eleventh conference', STP 782, 166-185; 1982, Philadelphia, PA, ASTM.
123. E. A. KENIK, T. INAZUMI, and G. E. C. BELL: J. Nucl. Mater., 1991, 183, 145-153.
124. E. A. KENIK: J. Nucl. Mater., 1992, 187, 239-246.
125. A. D. MARWICK: J. Phys. F, Met. Phys., 1978, 8, 1849-1861.
126. P. R. OKAMOTO and L. E. REHN: J. Nucl. Mater., 1979, 83, 2-23.
127. R. L. SIMONS and L. A. HULBERT: in 'Effects of radiation on materials' Twelfth international symposium', STP 870, 820-839; 1985, Philadelphia, PA, ASTM.
128. R. L. FISH, J. L. STRAALSUND, J. L. HUNTER, and J. J. HOLMES: in 'Effects of radiation on substructure and mechanical properties of metals and alloys', STP 529, 149-164; 1973, Philadelphia, PA, ASTM.
129. M. L. GROSSBECK, J. O. STIEGLER, and J. J. HOLMES: in 'Radiation effects in breeder reactor structural materials', (ed. M. L. Bleiberg and J. W. Bennett), 95-116; 1977, New York, AIME.
130. D. KRAMER, H. R. BRAGER, C. G. RHODES, and A. G. PARD: J. Nucl. Mater., 1968, 25, 121-131.
131. D. G. DORAN: Nucl. Sci. Eng., 1972, 49, 130-144.
132. C. PICKER, A. L. STOTT, and H. COCKS: in Proc. IAEA Specialists Meeting on 'Mechanical properties of fast reactor structural materials', Chester, UK, 1983, Paper IWGFR 49/440-4.
133. L. D. BLACKBURN, A. L. WARD, and J. M. STEICHEN: in 'Radiation effects in breeder reactor structural materials', (ed. M. L. Bleiberg and J. W. Bennett), 317-326; 1977, New York, AIME.
134. J. A. BEGLEY and J. D. LANDES: in 'Fracture toughness', STP 514, 1-20; 1974, Philadelphia, PA, ASTM.
135. C. W. HUNTER, R. L. FISH, and J. J. HOLMES: Trans. Am. Nucl. Soc., 1972, 15, 254-255.
136. Y. NAKAJIMA, Y. IINO, and M. SUZUKI: Eng. Fract. Mech., 1989, 33, 295-307.
137. F. H. HUANG: 'Fracture properties of irradiated alloys', 219-246; 1995, Richland, WA, Avante Publishing.
138. F. H. HUANG: in 'Dimensional stability and mechanical behaviour of irradiated metals and alloys', Vol. 1, 135-138; 1983, London, British Nuclear Energy Society.
139. M. L. HAMILTON, F. H. HUANG, W. J. S. YANG, and F. A. GARNER: in 'Influence of radiation in material properties: 13th int. symp. (Part II)', STP 956, 245-270; 1987, Philadelphia, PA, ASTM.
140. D. J. MICHEL and R. A. GRAY: J. Nucl. Mater., 1987, 148, 194-203.
141. J. W. CHAN, J. GLAZER, Z. MEI, and J. W. MORRIS, Jr: Adv. Cryogenic Eng. (Mater.), 1989, 36, 1299-1306.
142. J. W. CHAN, D. CHU, A. J. SUNWOO, and J. W. MORRIS, Jr: Adv. Cryogenic Eng. (Mater.), 1992, 38, 55-58.
143. H. KRAUTH and A. NYILAS: in 'Fracture and fatigue', Proc. 3rd Colloq. on Fracture, London, 1980,119-128; 1980, New York, Pergamon Press.
144. R. L. TOBLER, D. T. READ, and R. P. REED: in 'Fracture mechanics: Thirteenth conference', STP 743, 250-268; 1980, Philadelphia, PA, ASTM.
145. R. L. TOBLER and R. P. REED: Adv. Cryogenic Eng. (Mater.), 1982, 28, 83-92.
146. R. L. TOBLER and R. P. REED: in 'Materials studies for magnetic fusion energy applications at low temperatures III', Report NBSIR 80-1627, 17-48; 1980, Washington, DC, NBS.
147. I. S. HWANG, M. M. MORRA, R. G. BALLINGER, H. NAKAJIMA, S. SHIMAMOTO, and R. L. TOBLER: J. Test. Eval., 1992, 20, 248-258.
148. R. P. REED, N. J. SIMON, P. T. PURTSCHER, and R. L. TOBLER: in 'Materials studies for magnetic fusion energy applications at low temperatures IX', Report NBSIR 89-3050, 15-26; 1986, Washington, DC, NBS.
149. M. SHIMADA: Adv. Cryogenic Eng. (Mater.), 1990, 36, 1217-1224.
150. D. T. READ and R. P. REED: Cryogenics, 1981, 21, 415-417.
151. T. OGATA, K. ISHTKAWA, T. YURI, R. L. TOBLER, P. T. PURTSCHER, R. P. REED, T. SHOJI, K. NAKANO, and H. TAKAHASHI: Adv. Cryogenic Eng. (Mater.), 1988, 34, 259-266.
152. T. OGATA, K. NAGAI, K. ISHIKAWA, K. SHIBATA, and E. FUKUSHIMA: Adv. Cryogenic Eng. (Mater.), 1990, 36, 1053-1060.
153. T. OGATA, K. NAGAI, and K. ISHIKAWA: Adv. Cryogenic Eng. (Mater.), 1994, 40, 1191-1198.
154. E. S. DREXLER, N. J. SIMON, and R. P. REED: Adv. Cryogenic Eng. (Mater.), 1994, 40, 1199-1206.
155. W. J. MUSTER and J. ELSTER: Cryogenics, 1990, 30, 799-802.
156. A. NYILAS and H. YANAGI: Cryogenics, 1989, 29, 191-195.
157. P. T. PURTSCHER, R. P. WALSH, and R. P. REED: Adv. Cryogenic Eng. (Mater.), 1988, 34, 191-198.
158. T. A. SIEWERT, D. GORNI, and G. KOHN: Adv. Cryogenic Eng. (Mater.), 1988, 34, 343-350.
159. M. SHIMADA and S. TONE: Adv. Cryogenic Eng. (Mater.), 1988, 34, 131-139.
160. M. SHIMADA, R. L. TOBLER, T. SHOJI, and H. TAKAHASHI: Adv. Cryogenic Eng. (Mater.), 1988, 34, 251-257.
161. N. J. SIMON and R. P. REED: in 'Materials studies for magnetic fusion energy applications at low temperatures IX', Report NBSIR 89-3050, 27-42; 1986, Washington, DC, NBS.
162. P. T. PURTSCHER and R. P. REED: in 'Materials studies for magnetic fusion energy applications at low temperatures IX', NBSIR 89-3050, 53-76; 1986, Washington, DC, NBS.
163. K. YOSHIDA, H. NAKAJIMA, M. OSHIRIKI, R. L. TOBLER, S. SHIMAMOTO, R. MIURA, and J. ISHIZAKA: Adv. Cryogenic Eng. (Mater.), 1988, 34, 225-232.
164. R. P. REED, P. T. PURTSCHER, and L. A. DELGADO: in 'High manganese high nitrogen austenitic steels', 13-22; 1993, Materials Park, OH, ASM.
165. R. L. TOBLER and M. SHIMADA: J. Test. Eval., 1991, 19, 312-320.
166. H. NAKAJIMA, K. YOSHIDA, S. SHIMAMOTO, R. L. TOBLER, P. T. PURTSCHER, and R. P. REED: Adv. Cryogenic Eng. (Mater.), 1988, 34, 241-249.
167. S. TONE, M. SHIMADA, T. HORIUCHI, Y. KASAMATSU, H. NAKAJIMA, and S. SHIMAMOTO: Adv. Cryogenic Eng. (Mater.), 1984, 30, 145-152.
168. S. TONE, M. HIROMATSU, J. NUMATA, T. HORIUCHI, H. NAKAJIMA, and S. SHIMAMOTO: Adv. Cryogenic Eng. (Mater.), 1986, 32, 89-96.
169. R. OGAWA and J. W. MORRIS, Jr: Adv. Cryogenic Eng. (Mater.), 1984, 30, 177-184.
170. R. L. TOBLER and D. MEYN: Metall. Trans., 1988, 19A, 1626-1631.
171. H. TAKAHASHI, T. SHOJI, and R. L. TOBLER: Adv. Cryogenic Eng. (Mater.), 1988, 34, 387-395.
172. W. A. LOGSDON, J. M. WELLS, and R. KOSSOWKSY: 'Fracture mechanics properties of austenitic stainless steels for advanced cryogenic applications', Westinghouse Research Laboratories Scientific Paper 75-9D4-CRYMT-P3, Pittsburgh, PA, Dec. 1975.
173. N. YAMAGAMI, Y. KOHSAKA, and C. OUCHI: Adv. Cryogenic Eng. (Mater.), 1988, 34, 359-366.
174. P. T. PURTSCHER, M. C. MATAYA, L. M. MA, and R. P. REED: Adv. Cryogenic Eng. (Mater.), 1990, 36, 1291-1298.
175. E. FUKUSHIMA, S. KOBATAKE, M. TANAKA, and H. OGIWARA: Adv. Cryogenic Eng. (Mater.), 1988, 34, 367-370.
176. J. W. CHAN, D. CHU, C. TSENG, and J. W. MORRIS, Jr: Adv. Cryogenic Eng. (Mater.), 1994, 40, 1215-1221.
177. B. FULTZ and J. W. MORRIS, Jr: Acta Metall. Maler., 1986, 34, 379-384.
178. H. I. MCHENRY, D. T. READ, and P. A. STEINMEYER: 'Evaluation of stainless steel weld metals at cryogenic temperatures', Report NBSIR 79-1609, NBS, Washington, DC, 1979.
179. D. T. READ, H. I. MCHENRY, P. A. STEINMEYER, and R. D. THOMAS, Jr: Weld. J., 1980, 59, 104s-113s.
180. J. W. ELMER, H. I. MCHENRY, and T. A. WHIPPLE: in "Materials studies for magnetic fusion energy applications at low temperatures IV', Report NBSIR 81-1645, 289-302; 1981, Washington, DC, NBS.
181. C. N. MCCOWAN, T. A. SIEWERT, and R. L. TOBLER: J. Eng. Mater. Technol., (Trans. ASME), 1986, 108, 340-343.
182. R. L. TOBLER, R. E. TREVISAN, and R. P. REED: Cryogenics, 1985, 25, 447-451.
183. R. L. TOBLER, R. E. TREVISAN, T. A. SIEWERT, H. I. MCHENRY, P. T. PURTSCHER, C. N. MCCOWAN, and T. MATSUMOTO: Adv. Cryogenic Eng. (Mater.), 1988, 34, 351-358.
184. R. L. TOBLER, R. P. REED, I. S. HWANG, M. M. MORRA, R. G. BALLINGER, H. NAKAJIMA, and S. SHIMAMOTO: J. Test. Eval., 1991, 19, 34-40.
185. R. L. TOBLER, A. BUSSIBA, J. F. GUZZO, and I. S. HWANG: Adv. Cryogenic Eng. (Mater.), 1992, 38, 217-223.
186. H. NAKAJIMA, K. YOSHIDA, H. TSUJI, R. L. TOBLER, I. S. HWANG, M. M. MORRA, and R. G. BALLINGER: Adv. Cryogenic Eng. (Mater.), 1992, 38, 207-215.
187. K. NOHARA and Y. HABU: in 'High manganese high nitrogen austenitic steels', 33-42; 1992, Metals Park, OH, ASM.
188. H. I. MCHENRY: in 'Materials studies for magnetic fusion energy applications at low temperatures VI', Report NBSTR 83-1690, 127-155; 1983, Washington, DC, NBS.
189. S. D. WASHKO and G. AGGEN: in 'Metals handbook', 10th edn, Vol. 1, 841-907; 1990, Materials Park, OH, ASM.
190. M. ROUBY and P. BLANCHARD: in 'Stainless steels', 111-158; 1993, Les Ulis, Editions de Physique.