Predicting flow boiling heat transfer of refrigerants in microfin tubes

Journal of Enhanced Heat Transfer

Volumn 4, Issue 4, 1997, Pages 257-268

  Kandlikar, Satish G ^a   Raykoff, Taavo ^a  

^a Kate Gleason College of Engineering   (United States)

Author keywords

Enhanced flow boiling; Evaporation; Flow boiling augmentation; Flow boiling correlation; Microfin tube

Indexed keywords

CONDENSERS (LIQUEFIERS); CORRELATION METHODS; EVAPORATION; HEAT TRANSFER COEFFICIENTS; PIPE FLOW; REFRIGERANTS; REFRIGERATION; REYNOLDS NUMBER;

FLOW BOILING; FLOW BOILING AUGMENTATION; FLOW BOILING CORRELATION; MICROFIN TUBE; SINGLE PHASE FLOW;

HEAT TRANSFER;

EID: 0031337514     PISSN: 10655131     EISSN: None     Source Type: Journal    
DOI: 10.1615/jenhheattransf.v4.i4.20     Document Type: Article

References (29)

1. Chiang, R. (1993) "Heat Transfer and Pressure Drop During Evaporation and Condensation of R-22 in 7.5 mm and 10 mm Diameter Axial and Helical Grooved Tubes," AIChE Symposium Series, Heat Transfer Atlanta, 89(295), pp. 205-210.
2. Chamra, L. M. and Webb, R. L. (1995) "Condensation and Evaporation in Micro-fin Tubes at Equal Saturation Temperatures," Journal of Enhanced Heat Transfer, 2(3), pp. 219-229.
3. Cohen, M. and Carey, V. P. (1989) "A Comparison of the Flow Boiling Performance Characteristics of Partially-Heated Cross-Ribbed Channels with Different Rib Geometries," International Journal of Heat and Mass Transfer, 32(12), pp. 2459-2479.
4. Eckels, S. J., Pate, M. B. and Bemisderfer, C. H. (1992) "Evaporation Heat Transfer Coefficients for R-22 in Micro-fin Tubes of Different Configurations," ASME HTD 22, Enhanced Heat Transfer, pp. 117-125.
5. Eckels, S. J. and Pate, M. B. (1991) "Evaporation of HCFC-134a and CFC-12 in a smooth Tube and a Micro-fin Tube 1991," ASHRAE Transactions, 97(2), pp. 77-91.
6. Gallagher, J., McLinden, M., Morrison, G. and Huber, M. (1993) "NIST Thermodynamic Properties of Regrigerants and Refrigerant Mixtures Database (REFPROP)," US standard Reference Database 23, U. S. Department of Commerce, Gaithersberg, MD.
7. Ha, S. and Bergles, A. E. (1993) "The Influence of Oil on Local Evaporation Heat Transfer inside a Horizontal Microfin Tube," ASHRAE Transactions, 99, pp. 1244-1255.
8. Ito, M. and Kimura, H. (1979) "Boiling Heat Transfer and Pressure Drop in Internal Spiral-Grooved Tubes." Bulletin of JSME, 22(171), pp. 1251-1257.
9. Kandlikar, S. G. (1990) "A General Correlation for Predicting the Two-Phase Flow Boiling Heat Transfer Coefficient Inside Horizontal and Vertical Tubes," Transactions of the ASME, Journal of Heat Transfer, 112, pp. 219-228.
10. Kandlikar, S. G. (1991a) "A Model for Predicting the Two-Phase Flow Boiling Heat Transfer Coefficient in Augmented Tubes and Compact Evaporator Geometries," Transactions of the ASME, Journal of Heat Transfer, 113, pp. 966-972.
11. Kandlikar, S. G. (1991b) "Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids Inside Circular Tubes," Transactions of the ASME, Journal of Heat Transfer, 113, pp. 190-200.
12. th UIT National Conference 1996, Rome, Italy, pp. 241-248.
13. Khanpara, J. C., Bergles, A. E. and Pate, M. B. (1986) "Augmentation of R-113 In-tube Evaporation with Microfin Tubes," ASHRAE Transactions, 92, Part II, pp. 506-524.
14. Khanpara, J. C., Bergles, A. E. and Pate, M. B. (1987) "A Comparison of In-tube Evaporation of Refrigerant R-113 in Electrically Heated and Fluid Heated Smooth and Microfin Tubes," Advances in Enhanced Heat Transfer, ASME HTD, 68, pp. 35-46.
15. Khanpara, J. C., Pate, M. B. and Bergles, A. E. (1987) "Local Evaporation Heat Transfer in a Smooth Tube and Microfin Tube Using Refrigerants 22 and 113," Boiling and Condensation in Heat Transfer Equipment, ASME HTD, 85, New York, pp. 31-39.
16. Koyama, S., Yu. J., Momoki, S., Fuji, T. and Honda, H. (1995) "Forced Convective Flow Boiling Heat Transfer of Pure Refrigerants inside a Horizontal Microfin Tube," Paper presented at the Engineering Foundation Conference on Convective Flow Boiling, ASME, Banff, Canada.
17. Murata, K. and Hashizume, K. (1993) "Forced Convective Boiling of Nonazeotropic Refrigerant Mixtures Inside Tubes," Transactions of the ASME, Journal of Heat Transfer, 115, pp. 680-689.
18. Ravigururajan, T. S. and Gudimeta, B. R. (1995) "Single Phase Turbulent Flow Heat Transfer Enhancement in Micro-fin Tubes," Paper presented at the International Mechanical Engineering Congress and Exposition, San Francisco, ASME Book No. H01033, pp. 53-62.
19. Reid, R. S., Pate, M. B. and Bergles, A. E. (1991). "A Comparison of Augmentation Techniques during In-tube Evaporation of R-113," Transactions of the ASME, Journal of Heat Transfer, 113, pp. 451-458.
20. Robertson, J. M. and Lovegrove, P. C. (1983) "Boiling Heat Transfer With Freon 11 (R-11) in Brazed Aluminum Plate-Fin Heat Exchangers," Transactions of the ASME, Journal of Heat Transfer, 105, pp. 605-610.
21. Schlager, L. M., Pate, M. B. and Bergles, A. E. (1990) "Evaporation and Condensation Heat Transfer and Pressure Drop in Horizontal, 12.7 mm Microfin Tubes with Refrigerant 22," Transactions of ASME, Journal of Heat Transfer, 112, pp. 1041-1047.
22. Shinohara, Y. and Tobe, M. (1985) "Development of an Improved Thermofin Tube," Hitachi Cable Review, No. 4, pp. 47-50, (from Webb, 1994).
23. Singh, A. (1995) "Electrohydrodynamic (EHD) Enhancement of in-Tube Boiling and Condensation of Alternate (Non-CFC) Refrigerants," Ph.D. Dissertation, University of Maryland, College Park, August.
24. Singh, A., Ohadi, M. M. and Dessiatoun (1996) "Flow Boiling Heat Transfer Coefficients of R-134a in a Microfin Tube," Transactions of the ASME, Journal of Heat Transfer, 118, pp. 497-499.
25. Takamatsu, H., Momoki, H. S. and Fujii, T. (1993), "A Correlation for Forced Convective Boiling Heat Transfer of Pure Refrigerants in a Horizontal Smooth Tube," International Journal of Heat and Mass Transfer, 36(14), pp. 3351-3360.
26. Thors, P. and Bogart, J. (1994) "In-Tube Evaporation of HCFC-22 with Enhanced Tubes," Enhanced Heat Transfer, 1(4), pp. 365-377.
27. Webb, R. L. (1994) Principles of Enhanced Heat Transfer, John Wiley and Sons, Inc., NY.
28. Yasuda, K., Ohizumi, K., Hori, M. and Kawamata, O. (1990) "Development of Condensing Thermofin-HEX-C Tube," Hitachi Cable Review, No. 9, pp. 27-30, (from Webb, 1994)
29. Yoshida, S., Matsunaga, T. and Hong, H. P. (1987) "Heat Transfer to Refrigerants in Horizontal Evaporator Tubes with Internal, Spiral Grooves," Proceedings of the 1987 ASME-JSME Thermal Engineering Joint Conference, 5, P. J. Marto Ed., pp. 165-172.