Opportunities in abrasive water-jet machining

CIRP Annals - Manufacturing Technology

Volumn 46, Issue 2, 1997, Pages 697-714

  Hoogstrate, A M ^a   Van Luttervelt, C A ^a   Gosger, P ^b   Momber, A W ^c   Tonshoff H K ^d   Louis, H ^d   Klocke, F ^e   Riviere, D ^f   Magnusson, Ales C ^f   Gardner, J ^g   Rajurkar, K P ^h   Kim, T J ⁱ   Konacevic, R ^j   Ryd, J ^b   Henning, A ^k   Ojmertz, C ^l   Kruth, J P ^m   Meijer, J ⁿ   Leu, M C ^o  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b Extrude Hone ^*

^c WOMA Apparatenbau GmbH

^d LEIBNIZ UNIVERSITY HANNOVER   (Germany)

^e RWTH AACHEN UNIVERSITY   (Germany)

^f LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^g Boride Products Inc

^h UNIVERSITY OF NEBRASKA LINCOLN   (United States)

ⁱ UNIVERSITY OF RHODE ISLAND   (United States)

^j UNIVERSITY OF KENTUCKY   (United States)

^k FhG IPA   (Germany)

^l CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^m UNIVERSITY OF LEUVEN   (Belgium)

ⁿ UNIVERSITY OF TWENTE   (Netherlands)

^o USA NSF   (United States)

more..

Author keywords

[No Author keywords available]

Indexed keywords

ABRASIVE CUTTING; ABRASIVES; MILLING (MACHINING); TURNING;

ABRASIVE WATERJET CUTTING (AWJC); ABRASIVE WATERJET MACHINING; ABRASIVE WATERJET MILLING (AWJM); MATERIAL REMOVAL PROCESSES;

MACHINING;

EID: 0031332839     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)90008-6     Document Type: Article

References (46)

1. Alkire, T.D., 1996, Developmental trends of three-dimensional abrasive waterjet cutting systems for production applications, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct. Sardinia, Italy, pp 629-641
2. Bitter, J.G.A., A study of Erosion Phenomena - Part I, Wear, Vol. t, 1963, pp 169-190
3. Bloomfield, E.J., Yeomans, M.J., 1991, DIAJET - a review of progress, Proceedings of the 1th Asian Conference on Recent Advantages in Jetting technology, Singapore, pp 21-30
4. Brandt, C., Louis, H., et. al., 1996, Process control of abrasive water suspension jets, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct., Sardinia, Italy, pp 563-581
5. Chao, J., et al., 1995, Charcteristics of abrasive waterjet generated surfaces and effects of cutting parameters and structure vibration, ASME J. of Eng. for Industry, nov. 1995, pp 516-525
6. Chen, L., 1997, A study of surface striation formation mechanisms applied to abrasive waterjet process, CIRP Int. symp. Advanced Design and Manufacture in the Global Manufacturing Era, Aug 21-22, Hong Kong, pp 570-575
7. Finnie, I., 1958, The mechanism of erosion of doctile metals, Proceedings of the 3th National Congress of Applied Mechanics, ASME, pp 527-532
8. Geskin, E.S., 1996, Development of icejet machining technology, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct. Sardinia, Italy, pp 725-734.
9. [9) Hasish, M., 1987, Prediction of depth of cut in abrasive-waterjet (AWJ) machining, Modeling of materials processing, the winter annual meeting of the ASME, Boston, Mass., pp 65-82
10. Hasish, M., 1994, Agile machining with an intelligent abrasive-waterjet system, PED-Vol. 68-2, Manufacturing Science and Engineering, Vol. 2, ASME, New York, pp 887-891
11. Hasish, M., 1996, Deep hole drilling in metals using abrasive waterjets, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct., Sardinia, Italy, pp 691-707.
12. Hoogstrate, A.M., et al, 1998, A procedure for process optimisation in abrasive waterjet cutting of monolithic and layered materials, Proceedings of the 5th Pacific Rim Conference, New Delhi, India (to be published)
13. Hoogstrate, A.M., et al, 1998, Abrasive waterjet cutting of hybrid laminated metal materials, Proceedings of the 5th Pacific Rim Conference, New Delhi, India (to be published)
14. Jong, J. de, 1997, Optimalisatie van de snedekwaliteit van het hoge druk abrasief waterstraalsnijden, Internal report TUDelft, PT97.023
15. Kovacevic, R., 1994, Apparatus and method of high-pressure waterjet assisted cooling/lubricaton in machining, US Patent no 5.288.186
16. Kovacevic, R., 1994, Sensing the abrasive water jet nozzle wear, Int. J. of water jet technology, Vol. 2, no. 1
17. Luttervelt, C.A. van, 1989, On the selection of manufacturing methods illustrated by an overview of separation techniques for sheet materials, Annals of the CIRP vol. 38/2 pp 587-607
18. Mohan, R.S., Momber, A.W., 1995, et al., Detection of energy absorbtion during abrasive water jet machining using acoustic emission technique, International Mechan. Engineering Congress and Exhibition, San Fransisco
19. Monno, M., 1997, Selection of process parameters for abrasive water jet (AWJ) cutting, Proceedings of the International Conference of Cutting Technology, Hannover
20. Nanduri, M., Kim, T.J. et al., 1996, Wear patterns in abrasive waterjet nozzles, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct., Sardinia, Italy, pp 27-43
21. Öjmertz, K.M.C., 1994, Abrasive Waterjet Machining, Licentiate Thesis, Chalmers University of Technology
22. Öjmertz, K.M.C., Jonasson, M., 1996, Analysis of surfaces produced by abrasive waterjet milling techniques, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct., Sardinia, Italy, pp 753-768
23. Paul, S., Hoogstrate, A.M., 1997, An experimental investigation of rectangular pocket milling with abrasive water jet, Journal of Materials Processing Technology, (In Press), Code Nr. P 888
24. Paul, S., Hoogstrate, A.M., Luttervelt, C.A. van, 1997, Analytical and experimental modelling of abrasive water jet cutting of ductile materials, to be published in Journal of Materials Processing Technology, Code No. P 889
25. Pott, G.T., Hueting, D.J., Maassen, W.A.H., Deursen, J.H. van, 1997, Upgraded flax fibers als reinforcement of plastic composites, Materialen no 3 pp 11-14 (in Dutch)
26. Powell, J. et al., 1995, The profiling of sharp corners by abrasive water jet cutting, Int.J. of Water Jet Technology, vol.2, no. 2, pp 119-125
27. Product information of ABB-IR, 1991, Sweden
28. Product information of Allfi AG, 1997
29. Product information of Boride Products Inc., USA, 1996
30. Product information of Extrude Hone, 1997
31. Product information of Flow Inc, 1990-1997, different leaflets
32. Product information of Ingersoll Rand, 1994-1997,different leaflets
33. Product information of Synova, SA, Lausanne, CH, 1997
34. Product information of Trumpf, 1997
35. Raissi, K. et al., 1996, Mixing tube geometry influence on abrasive water jet flow, Proceedings of the 13th International Conference on Jetting Technology, 29-31 Oct., Sardinia, Italy, pp 247-267
36. Raju, S.P., Ramulu, M., 1994, Predicting Hydro-abrasive erosive wear during abrasive waterjet cutting, PED-Vol. 68-1, Manufacturing Science and Engineering, Vol. 1, ASME, pp 339-351
37. Sato, H., 1996, A view on east and west through a researcher's experience, Liber Amicorum Prof. Paul Vanherck., Katholieke Universiteit Leuven, pp 145-155
38. Schmelzer, M., 1994, Mechanismen der Strahlerzeugung beim Wasser-Abrasivstrahlschneiden, Dissertation, Technische Hochschule Aachen
39. Schumacher, C.E., 1995, M~achining head for a waterjet cutting machine and aiming device intended to equip such head, US Patent no 5.469.768
40. Siores, E. et al., 1996, Enhancing Abrasive waterjet cutting of ceramics by head oscillation techniques, Annals of the CIRP Vol. 45/1, pp 327-330
41. Summers, D.A., 1995, Waterjetting technology, Chapman & Hall
42. Tönshoff, H.K., Kroos, F., 1994, Increasing fatigue strength by water peening, International Conference on Residual Stress, Baltimore, Maryland, USA
43. Yong, Z., Kovacevic, R., 1996, Simulation of effects of water-mixture film on impact contact with abrasive waterjet machining, accepted for the International Journal of Mechanical Sciences
44. Zeng, J., Kim, T.J., 1996, An erosion model in polycrystalline ceramics in abrasive waterjet cutting, Wear 193, pp 207-217
45. Zwaag, S. van der, 1997, Design of new materials, Materialen no 3 pp 17-26 (in Dutch)
46. Anom, 1997, Separation techniques, part 1 Principles, part 2 Selection, Guideline for the Metalworking Industry (in Dutch)