Evaluation of the detectability and quantification of respirable crystalline silica by X-ray powder diffraction methods

Powder Diffraction

Volumn 12, Issue 4, 1997, Pages 200-227

  Smith, Deane K ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR QUALITY; AMORPHOUS MATERIALS; CRYSTALLINE MATERIALS; CRYSTALLITE SIZE; FILTRATION; QUARTZ; SILICA; SILICATE MINERALS; X RAY DIFFRACTION;

AIR QUALITY MONITORING; CRYSTALLINE SILICA; DETECTION AND QUANTIFICATIONS; POTENTIAL INTERFERENCES; SIMPLE MODIFICATIONS; SIZE AND SIZE DISTRIBUTIONS; STANDARD PROCEDURES; STANDARDIZED PROCEDURE;

X RAY POWDER DIFFRACTION;

EID: 0031321805     PISSN: 08857156     EISSN: 19457413     Source Type: Journal    
DOI: 10.1017/S0885715600009775     Document Type: Article

References (206)

1. Abell, M. T., and Dollberg, D. D. (1978). "A Quantitative Analysis Software Package for Use with the APD3500," Norelco Rep. 25, 21-25. (Automation)
2. Abell, M. T., Dollberg, D. D., and Crable, J. V. (1981a). "Quantitative Analysis of Dust Samples from Occupational Environments Using Computer-Automated X-ray Diffraction." Adv. X-Ray Anal. 24, 37-48. (Automation)
3. Abell, M. T., Dollberg, D. D., Lange, B. A., Hornung, R. W., and Haartz, J. C. (1981b). "Absorption Corrections in X-ray Diffraction Dust Analysis; Procedures Employing Silver Filters," in Electron Microscopy and X-ray Applications 2, p115 (Ann Arbor Science Publications, Ann Arbor, Vol. 2, p. 115. (Filter)
4. Alexander, L. E., and Klug, H. P. (1948). "Basic Aspects of X-ray Absorption in Quantitative Diffraction Analysis of Powder Mixtures." Anal. Chem. 20, 886-894, reprinted Powder Diffr. 4, 66-99. (Theory)
5. Alexander, L. E., and Klug, H. P. (1948). "Basic Aspects of X-ray Absorption in Quantitative Diffraction Analysis of Powder Mixtures." Anal. Chem. 20, 886-894, reprinted Powder Diffr. 4, 66-99. (Theory)
6. Alexander, L. E., Klug, H. P., and Kammer, E. (1948). "Statistical Factors Affecting the Intensity of X-rays Diffracted by Crystalline Powders," J. Appl. Phys. 19, 742-753. (Theory)
7. Allen, G., Samimi, B., Ziskind, M., and Weill, H. (1974). "X-ray Diffraction Determination of α-Quartz in Respirable and Total Dust Samples from Sand-Blasting Operations," Am. Ind. Hyg. Assoc. J. 35, 711-717. (Filter)
8. Altree-Williams, S. (1977). "Quantitative X-ray Diffractometry on Milligram Samples Prepared on Silver Filters," Anal. Chem. 49, 429-432. (Filter)
9. Williams, S. (1978). "Calculated X-ray Diffraction Data and Quantitative X-ray Diffractometry," Anal. Chem. 50, 1272-1276. (Theory)
10. Altree-Williams, S., Lee, J., and Mezin, N. (1977). "Quantitative X-ray Diffractometry on Respirable Dust Collected on Nuclepore Filters," Ann. Occup. Hyg. 20, 109-126. (Filter)
11. Altree-Williams, S., Byrnes, J. G., and Norman, M. B. (1981a). "Reference Material for the Quantitation of alpha-Quartz in Respirable Dust by X-ray Diffraction," Ann. Occup. Hyg. 24. 347-356. (Calibration)
12. Altree-Williams, S., Byrnes, J. G., and Jordan, B. (1981b). "Amorphous Surface and Quantitative X-ray Powder Diffractometry," Analyst (Cambridge, U.K.) 106, 69-75. (Amorphous)
13. Anderson, P. L. (1975). "Free Silica Analysis of Environmental Samples - A Critical Literature Review," Am. Ind. Hyg. Assoc. J. 36, 767-776. (Review)
14. Babyak, B. S., and Kaschak, B. S. (1975, 1978). "Free Silica - A Bibliography," Industrial Health Foundation, Inc., 5231 Centre Ave., Pittsburgh, PA. (Review)
15. Bartley, D. L., and Doemeny, L. J. (1986). "Critique of 1985 ACGIH Report on Particle Size-Selective Sampling in the Workplace," Am. Ind. Hyg. Assoc. J. 47, 443. (Particles)
16. Bayliss, P. (1986). "Quantitative Analysis of Sedimentary Minerals by Powder X-ray Diffraction," Powder Diffr. 1, 37-39. (Bulk Anal.)
17. Bish, D. L., and Howard, S. A. (1988). "Quantitative Phase Analysis Using the Rietveld Method," J. Appl. Crystallogr. 21, 86-91. (Bulk Anal.)
18. Bish, D. L., and Reynolds, R. C. (1989). "Sample Preparation for X-ray Diffraction," in Modern Powder Diffraction, edited by D. L. Bish, and J. E. Post, (Mineralogical Society of America, Washington, DC). (Sample Prep.)
19. Blount, A. (1989). Personal communication to P. A. Carr, Rutgers University, NJ. (Filter)
20. Bradley, A. A. (1967). "The Determination of Quartz in Very Small Samples by an X-ray Technique," J. Sci. Instrum. 44, 287-288. (Bulk Anal.)
21. Brindley, G. W. (1945). "The Effect of Grain or Particle Size on X-ray Reflections from Mixed Powders or Alloys," Philos. Mag. 36, 347-369. (Particles)
22. Brindley, G. W. (1980). "Quantitative X-ray Mineral Analysis of Clays," Chapter 5 in Crystal Structures of Clay Minerals and Their X-ray Identification, edited by G. W. Brindley and G. Brown, (Mineralogical Society, London, UK). (Particles)
23. Brindley, G. W., and Udagawa, S. (1959). "Sources of Errors in the X-ray Determination of Quartz," J. Am. Ceram. Soc. 42, 643-644. (Particles)
24. Buhrke, V., Jenkins, R., and Smith, D. K. (1997). Specimen Preparation for X-ray Analysis (Wiley-Interscience, New York) (Sample Prep.)
25. Bumsted, H. E. (1973). "Determination of Alpha-Quart/ in the Respirable Portion of Airborne Particulates by X-ray Diffraction," Am. Ind. Hyg. Assoc. J. 34, 150-158. (Filter)
26. Bumsted, H. E. (ND). "Free Silica Determination with an Automated X-ray Diffractometer," presented at the American Indian Hygiene Conference Houston, TX. (Automation)
27. Calvert, L. D., Sirianni, A. F., Gainsford, G. J., and Hubbard, C. R. (1982). "A Comparison of Methods for Reducing Preferred Orientation," Adv. X-Ray Anal. 26, 105-110. (Sample Prep.)
28. Carsey, T. (1987). "LISA: A New Aerosol Generation System for Sampler Evaluation," Am. Ind. Hyg. Assoc. J. 48, 710-717. (Sampling)
29. Carter, J. R., Hatcher, M. T., and Di Carlo, L. (1987). "Quantitative Analysis of Quartz and Cristobalite in Bentonite Clay-Based Products by X-ray Diffraction," Anal. Chem. 59, 513-519. (Bulk Anal.)
30. Casciani, G., and G. Ripanucci, (1984). "Optimization of Environmental Sampling of Quartz Containing Dust in Relation to the Limits and Nonlinearity of the Diffractometric Response," Med. Lav. 75, 200-206. (Filter)
31. Chung, F. H. (1974a). "Quantitative Interpretation of X-ray Diffraction Patterns of Mixtures. I. Matrix-Flushing; Method for Quantitative Multicomponent Analysis," J. Appl. Crystallogr. 7, 519-525. (Theory)
32. Chung, F. H. (1974b). "Quantitative Interpretation of X-ray Diffraction Patterns of Mixtures. II. Adiabatic Principle of X-ray Diffraction Analysis of Mixtures," J. Appl. Crystallogr. 7, 526-531. (Theory)
33. Chung, F. H. (1975). "Quantitative Interpretation of X-ray Diffraction Patterns. III. Simultaneous Determination of a Set of Reference Intensi-ties," J. Appl. Crystallogr. 8, 17-19. (Theory)
34. Chung, F. H. (1982). "Synthesis and Analysis of Crystalline Silica," Environ. Sci. Technol. 16, 796-799. (Calibration)
35. Chung, F. H. (1978). "Imaging and Analysis of Airborne Dust for Silica," Environ. Sci. Technol. 12, 1208-1210. (Evaluation)
36. Clark, G. L., and Reynolds, D. H. (1936). "Quantitative Analysis of Mine Dusts: An X-ray Diffraction Method," Ind. Eng. Chem. (Anal. Ed.) 8, 36-42. (Bulk Anal.)
37. Clelland, D. W., Cumming, W. M., and Ritchie, P. D. (1952). "PhysicoChemical Studies on Dusts. I. A. High Solubility Layer on Siliceous Dust Surfaces," J. Appl. Chem. 2, 31-41. (Amorphous)
38. Clelland, D. W., Cumming, W. M., and Ritchie, P. D. (1952). "PhysicoChemical Studies on Dusts. II. Nature and Regeneration of the High Solubility Layer on Siliceous Dusts," J. Appl. Chem. 2, 42-48. (Amorphous)
39. Cline, J. P. (1986). "A Study of Quantitative Analysis by X-ray Powder Diffraction," Ph.D. thesis, Alfred University. (Theory)
40. Cline, J. P., and Snyder, R. L. (1983). "The Dramatic Effect of Crystallite Size on X-ray Intensities," Adv. X-Ray Anal. 26, 111-117. (Theory)
41. Cline, J. P., and Snyder, R. L. (1985). "Powder Characteristics Affecting Quantitative Analysis," in Advances in Materials Characterization, edited by R. L. Snyder, R. A. Condrate, and P. F. Johnson, (Plenum, New York), Vol. II, pp. 131-144. (Theory)
42. Cline, J. P., and Snyder, R. L. (1987). "The Effects of Extinction on X-ray Powder Diffraction Intensities," Adv. X-Ray Anal. 30, 447-456. (Theory)
43. Collins, G. C. S., and Nicholas, D. (1976). "X-ray Analysis of Paniculate Matter Collected in an Environmental Monitoring Device," Analyst, Lond. 101, 901-911. (Filter)
44. Copeland, L. E., and Bragg, R. H. (1958). "Quantitative X-ray Diffraction Analysis," Anal. Chem. 30, 196-206. (Bulk Anal.)
45. Crosby, M. T., and Hamer, P. S. (1971). "The Determination of Quartz in Personal Sampler Filters by X-ray Diffraction," Am. Occup. Hyg. 14, 65-70. (Filter)
46. Davis, B. L. (1984). "Reference Intensity Quantitative Analysis using Thin-Layer Aerosol Samples," Adv. X-Ray Anal. 27, 339-348. (Filter)
47. Davis, B. L. (1986a). "A Tubular Aerosol Suspension Chamber for the Preparation of Powder Samples for X-ray Diffraction Analysis," Powder Diffr. 1, 240-243. (Samples)
48. Davis, B. L. (1986b). "Reference Intensity Method of Quantitative X-ray Diffraction Analysis," South Dakota School of Mines. (Theory)
49. Davis, B. L. (1988). "The Estimate of Limits of Detection in RIM Quanti-tative X-ray Diffraction Analysis," Adv. X-Ray Anal. 31, 317-323. (Filter)
50. Davis, B. L., and Johnson, L. R. (1982a). "On the Use of Various Filter Substrates for Quantitative Particulate Analysis by X-ray Diffraction," Atmos. Environ. 16, 273-282. (Filter)
51. Davis, B. L., and Johnson, L. R. (1982b). "Sample Preparation and Methodology for X-ray Quantitative Analysis of Thin Aerosol Layers Deposited on Glass Fiber and Membrane Filters," Adv. X-Ray Anal. 25, 295-300. (Sample Prep.)
52. Davis, B. L., and Johnson, L. R. (1987). "The Use of Mass Absorption in Quantitative X-ray Diffraction Analysis," Adv. X-Ray Anal. 30, 333-342. (Theory)
53. Davis, B. L., Johnson, L. R., and Mebrahtu, T. (1986). "X-ray Quantitative Analysis of Coal by the Reference Intensity Method," Powder Diffr. 1, 244-254. (Filter)
54. Dempster, P. B., and Ritchie, P. D. (1952). "Surface of Finely Grained Silica," Nature (London) 169, 538-539. (Amorphous)
55. Dobreva, M., Lukanova, R., Werner, I., and Petrov. S. (1982). "Evaluation of the Various Methods for the Determination of Crystalline Silicon Dioxide by Comparing the Results of the Analysis of Industrial Dusts," Z. Gesamte Hyg. Ihre Grenzgeb. 28, 317-320. (Evaluation)
56. Dollberg, D. D., Abell, M. T., and Lange, B. A. (1980). "Occupational Health Analytical Chemistry Quantitation Using X-ray Powder Diffraction," ASC Symposium Series, No. 120, pp. 43-46. (Filter)
57. Donovan, D. T., Knauber, J. W., and VonderHeiden, F. H. (1972). "Silica Analysis of Industrial Hygiene Samples by X-ray Diffraction, Interim Report." Fourteenth Eastern Analytical Symposium, Atlantic City, NJ. (Filter)
58. Dragoo, A. L. (1986). "Standard Reference Materials for Powder Diffraction, Part 1 - Overview of Current and Future Standard Materials," Powder Diffr. 1, 294-298. (Calibration)
59. Drees, L. R., Wilding, L. P., Smeck, N. E., and Senkayi, A. L. (1989). "Silica in Soils: Quartz and Disordered Silica Polymorphs," in Minerals in Soil Environments, 2nd ed. (Soil Science of America, Madison, WI), pp. 913-974. (Minerals)
60. Edmonds, J. M., Henslee, W. W., and Guerra, R. E. (1977). "Particle Size Effects in the Determination of Respirable α-Quartz by X-ray Diffraction." Anal. Chem. 49, 2196-2203. (Particles)
61. Edwards, G. H. (1965). "Comparison of X-ray Diffraction, Chemical (Phosphoric Acid), and Dispersion Staining Methods for the Determination of Quartz in Dust," Am. Ind. Hyg. Assoc. J. 26, 532-536. (Evaluation)
62. Elton, N. J., Salt, P. D., and Adams, J. M. (1992). "The Determination of Low Levels of Quartz in Commercial Kaolins by X-ray Diffraction," Powder Diffr. 7. (in press) (Bulk Anal.)
63. Emig, J. A., and Smith, D. K. (1989). "The Detection and Quantification of Low Concentrations of Quartz in Dolostone by X-ray Powder Diffraction," Powder Diffr. 4, 209-213. (Bulk Anal.)
64. Fluerence, A. M., Loisel, M., and Pusset, M. (1969). "Quantitative Analysis of Raw Materials and Ceramic Products by X-ray Diffraction," Ind. Ceram. 616, 183. (Bulk Anal.)
65. Foster, R. D., and Walker, R. F. (1984). "Quantitative Determination of Crystalline Silica in Respirable Size Dust Samples by Infrared and Spectrophotometry," Analyst, London 109, 1117-1128. (Filter)
66. Freedman, R. W., Toma, S. Z., and Lang, H. W. (1974). "On-Filter Analysis of Quartz in Respirable Coal Dust by Infrared Absorption and X-ray Diffraction," Am. Ind. Hyg. Assoc. J. 35, 411-418. (Filter)
67. Frevel, L. K., and Roth, W. C. (1982). "Semimicro Assay of Crystalline Phases by X-ray Powder Diffractometry," Anal. Chem. 54, 677-682. (Filter)
68. C. Frondel, (1962). "Dana's System of Mineralogy, 7th Ed. Vol. III. Silica Minerals," J (Wiley, New York) (Minerals)
69. Garbauskas, M. F., and Goehner, R. P. (1982). "Complete Quantitative Analysis Using Both X-ray Fluorescence and X-ray Diffraction," Adv. X-Ray Anal. 25, 283-288. (Bulk Anal.)
70. Gephardt, R. F. (1975). "Respirable Dust Regulations and Measurement." Portland Cement Association Meeting, Tuscon, AZ. (Review)
71. Goehner, R. (1982). "X-ray Diffraction Quantitative Analysis Using Intensity Ratios and External Standards," Adv. X-Ray Anal. 25, 309-313. (Bulk Anal.)
72. Gordon, R. L., and Harris, G. W. (1956). "Effect of Particle Size on the Determination of Quartz by X-ray Diffraction," Nature 175, 1135-1137. (Particle)
73. Hamilton, R. D., and Peletis, N. G. (1991). "The Determination of Quartz in Perlite by X-ray Diffraction," Adv. X-Ray Anal. 33, 493-498. (Bulk Anal.)
74. Hamilton, R. D., Peletis, N. G., and Miles, W. J. (1990). "Detection and Measurement of Crystalline Silica in Minerals and Chemicals," in Regulation of Crystalline Silica, Washington, DC. (Manville Corporation, Denver, CO). (Evaluation)
75. Henslee, W. W., and Guerra, R. E. (1977). "Direct Quantitative Determination of Silica by X-ray Diffraction on PVC Membrane Filters," Adv. X-Ray Anal. 20. 139-152. (Filter)
76. Hill, R. J., and Howard, C. J. (1987). "Quantitative Phase Analysis From Neutron Powder Diffraction Data Using the Rietveld Method," J. Appl. Crystallogr. 20, 467-474. (Bulk Anal.)
77. Howard, S. A., and Snyder, R. L. (1982). "An Evaluation of Some Profile Models and the Optimization Procedures in Profile Fitting," Adv. X-Ray Anal. 26, 73-80. (Theory)
78. Huhbard, C. R. (1982). "New Standard Reference Materials for X-ray Powder Diffraction," Adv. X-Ray Anal. 26, 45-51. (Calibration)
79. Hubbard, C. R., Evans, E. H., and Smith, D. K. (1976). "The Reference Intensity Ratio, I/Ic, for Computer Simulated Powder Patterns," J. Appl. Crystallogr. 9, 169-174. (Theory)
80. Hubbard, C. R., Robbins, C. R., and Snyder, R. L. (1983). "XRD Quantitative Analysis Using the NBS*QUANT82 System," Adv. X-Ray Anal. 26, 149-157 (Automation)
81. Hubbard, C. R., and Smith, D. K. ( 1977). "Experimental and Calculated Standards for Quantitative Analysis by Powder Diffraction," Adv. X-Ray Anal. 20, 27-39. Theory)
82. Hubbard, C. R., and Snyder. R. L. (1988). "Reference Intensity Ratios -Measurement and Use in Quantitative XRD," Powder Diffr. 3, 74-78. (Theory)
83. Hutchison, C. S. (1974). Laboratory Handbook of Petrographic Techniques (Wiley. New York). (Sample Prep.)
84. Janko, M., McCrae, R. E., O'Donnell, J. F., and Austria, R. J. (1989). "Occupational Exposure and Analysis of Macrocrystalline Cristobalite in Mullite," Am. Hyg. Assoc. J. 50, 460-465. (Filter)
85. Jenkins, R., Fawcett, T. G., Smith, D. K., Visser, J. W., Morris, M. C., and Frevel, L. K. (1986). "JCPDS - International Centre for Diffraction Data Sample Preparation Methods in X-ray Powder Diffraction," Powder Diffr. 1, 51-63. (Sample Prep.)
86. Jenkins, R., and Snyder, R. L. (1996). Introduction to X-ray Powder Diffractometry (Wiley-Interscience, NY), pp. 403. (Theory)
87. Jephcott, C. M., and Wall, H. F. W. (1955). "Determination of Quartz of Various Particle Sizes in Quartz-Silicate Mixtures," AMA Arch. Ind. Health 11, 425-430. (Particles)
88. Johnson, L. R., and Davis, B. L. (1982). "X-ray Diffraction Quantitative Analysis using the Reference Intensity Method," Norelco Reporter 29, 28-34. (Sample Prep)
89. Jones, J. B., Sanders, J. V., and Segnit, E. R. (1964). "Structure of Opal," Nature 204, 990-991. (Minerals)
90. Jordan, B., O'Connor, B. H., and Deyu, L. (1990). "Use of Rietveld Pattern Fitting to Determine the Weight Fraction of Crystalline Material in Natural Low Quartz Specimens," Powder Diffr. 5, 64-69. (Amorphous)
91. Kacsmar, P. M., and Tomb, T. F. (1984). "Comparison of Alpha Quartz Materials Used as Calibration Standards," Coal Mines Dust Conference, West Virginia University, Morgantown, WV, pp. 144-149. (Calibration)
92. Kamarchik, P., Jr. (1980). "Quantitative Crystalline Pigment Analysis by X-ray Diffraction," J. Coatings Technol. 52, 79-82. (Bulk Anal.)
93. Karlak, R. F., and Burnett, D. S. (1966). "Quantitative Phase Analysis by X-ray Diffraction," Anal. Chem. 38, 1741-1745. (Theory)
94. Klug, H. P., Alexander, L. E., and Kammer, E. (1948). "X-ray Diffraction Analysis of Crystalline Dusts," J. Ind. Hyg. Toxicol. 30, 166-171. (Bulk Anal.)
95. Klug, H. P., and Alexander, L. E. (1974). X-ray Diffraction Procedures, 2nd. ed. (Wiley, New York). (Theory)
96. Knight, G. (1971). "Determination of Respirable Quartz in Mine Air Using Personnel Samplers and X-ray Diffraction," Proceedings of the 18th Spectroscopy Symposium and Exposition, Spectroscopic Society of Canada, pp. 86-92. (Filter)
97. Knight, G. (1972). "X-ray Diffraction Analysis of Quartz in Respirable Dust, Brief Description and Procedure," in Proceedings Roundtable Discussion, Analytical Techniques for Quartz, J. V. Crable, Ed., Amer. Conf. Govt. Ind. Hyg., Cincinnati, OH. Pp30-38. (Bulk Anal.)
98. Knight, G. (1973). "Comments." in "Proceedings of a Roundtable Discussion on Analytical Techniques for Quartz," American Conference on Governmental Industrial Hygienists, Cincinnati, OH, p67. (Evaluation)
99. Knight, G. (1984). "Interlaboratory Crosscheck of Quartz Analysis on Mine Airborne Dust Samples," Am. Ind. Hyg. Assoc. J. 45, 655-660. (Evaluation)
100. Knight, G., Stefanich, W., and Ireland, G. (1972). "Laboratory Calibration of a Technique for Determination of Respirable Quartz in Mine Air," Am. Ind. Hyg. Assoc. J. 33, 469-475. (Calibration)
101. Knight, G., Kowaichuk, R., and Yourt, R. (1974). "Development of a Dust Sampling System for Hardrock Mines Based on Gravimetric Quartz Assessment," Am. Ind. Hyg. Assoc. J. 35, 671-680. (Sampling)
102. Knight, G. (1984). "The Use of an On-line Computer to Control Quantitative XRD Analysis," in Proceedings of the Fourth Symposium on Electron Microscopy and X-ray Applications to Environmental and Occupational Analysis (1980), edited by P. A. Russell, Butterworths (pp. 171-185. Bulk Anal.)
103. Knight, G. (1986). "CAMPEDS - A Dust Sampling and Assessment System for Use in Hard Rock Mines," Ann. Occup. Hyg. 30, 139. (Filter)
104. Knight, G., and Zawadski, W. (1989). "X-ray Diffraction Analysis of Mine Airborne Dust-An Interference Problem at Helmo Gold Mine," Aina J. 50, 293-297. (Filter)
105. Kohyama, N. (1985). "A New Diffraction Method for the Quantitative Analysis of Free Silica in Airborne Dust in Working Environments.," Ind. Health 23, 221-234 (Filer).
106. Kolk, A. L. V. (1975). "Quartz Analysis of Respirable Dust by X-ray Diffraction," Proceedings of the Symposium on Silica, Ind. Health Found., Inc., Pittsburgh, PA, pp 56-68. (Evaluation).
107. Kudo, M. (1982). "Determination of Free Silicon Dioxide Content in Deposited Dusts by X-ray Diffraction Method," Sangyo Igaku 24, 392-393. (Filter)
108. Kupel, R. E., Kinser, R. E., and Mauer, P. A. (1968). "Separation and Analysis of Less Than 10-Micron Fractions of Industrial Dusts," Am. Ind. Hyg. Assoc. J. 29, 364. (Filter)
109. Kupka, F. (1967). "Quantitative Determination of Cristobalite by X-ray Diffraction Analysis," Silicaty 11, 56-62. (Bulk Anal.)
110. Lazarov L., and Petrov, K. (1969). "X-ray Determination of Free Silicon Dioxide," Rudodobiv Mit. 24, 20-22. (Bulk Anal.)
111. Leroux, J. (1969). "Preparation of Thin Dust Layers for X-ray Emission and Diffraction Analysis," Staub, Reinhalt, Luft 29, (Filter)
112. Leroux, J., Perault, G., and Davey, A. B. C. (ND). "Particle Size and Its Effect on X-ray Diffraction Precision Analysis of Fine Quartz Layers," Can. J. Spectrosc. 96, 527-529. (Particles)
113. Leroux, J., and Powers, C. A. (1969a). "Quantitative analysis of Quartz in Dust on Silver Filter Membrane Filters," Staub. 29, 197-200. (Filter)
114. Leroux, J., and Powers, C. A. (1969b). "Direct X-ray Diffraction Quantitative Analysis of Quartz in Industrial Dust Films Deposited on Si Silver Membrane Filters," Staub-Reinhalt. Luft 26, 26-31. (Filter)
115. Leroux, J. And Davey, A. B. C. (1976). "Quartz in Airborne Dust," Proceedings Symposium on Silica, Ind. Health Foundation, Pittsburgh, PA, 69-90. (Filter)
116. Leroux, J., Davey, A. B. C., and Paillard, A. (1973). "Proposed Standard Methodology for the Evaluation of Silicosis Hazards," Am. Ind. Hyg. Assoc. J. 34, 409-417. (Filter)
117. Leroux, J., Davey, A. B. C., and Paillard, A. (1972). "Sampling and Analytical Conditions for the Health Hazard Assessment of Siliceous-Type Dusts," Staub-Reinhalt. Luft 32, 491. (Filter)
118. Leroux, J., Lennox, D. H., and Kay, K. (1953). "Direct Quantitative X-ray Analysis by Diffraction Absorption Technique," Anal. Chem. 25, 740-743. (Filter)
119. Leroux, J., and Varga, I. (1971). "Average Composition of Particulate Pollutants as Disclosed by X-ray Techniques," Int. Environ. Anal. Chem. 1, 131-140. (Filter)
120. Lippman, M. (1983). "Sampling Aerosols by Filtration," in Air Sampling Instruments for the Evaluation of Atmospheric Contaminents, 6th. edited by F. Chap, P. J. Lioy, and M. J. Y. Lioy (Americal Conference of Governmental Industrial Hygienists, Cinninnati, OH). (Filter)
121. Lorberau, C. D., Carsey, T. P., Fischbach, T. J., and Mulligan, K. J. (ND). "Evaluation of Direct-on-Filter Methods for the Determination of Respirable α-Quartz," Appl. Occup. Environ. Hyg. (Filter)
122. Madsen, I. D., and Hill, R. J. (1988). "QPDA - A User-Friendly, Interactive Program for Quantitative Phase and Crystal Size/Strain Analysis of Powder Diffraction Data," Powder Diffr. 5, 195-199. (Automation)
123. Malik, O. P., and Viswanathan, P. C. (ND). "Measurement of Respirable Airborne Silica by X-ray Diffraction: An Aid to Evaluating the Potential Silicosis Hazard in the Workplace." Science and Industry, 34-37. (Automation)
124. Mark, D. (1971). "Problems Associated with the Use of Membrane Filters for Dust Sampling when Compositional Analysis is Required," Ann. Occup. Hyg. 17, 35-40. (Evaluation)
125. Martinez-Fidalgo, M., Gonzalez-Feramdez, A., and Menendez-Guiterez, R. A. (1985). "Technical Prevention of Dust in Coal Mines. Monitoring of Silica," Med. Segur. Trab. 31, 9-12. (Evaluation)
126. McGlynn, J. (1968). "A review of Physical and Chemical Methods for the Determination of Quartz." Proceedings of the First Australian Pneumoconiosis Conference, Joint Coal Board, Sydney, 529-541. (Evaluation)
127. Miles, W. J. (1994). "Crystalline Silica Analysis of Wyoming Bentonite By X-ray Diffraction after Phosphoric Acid Digestion," Anal. Chim. Acta 286, 97-105.
128. Miola, W., and Ramani, R. V. (1991). "Quartz Analysis in Bulk Samples: Sample Preparation Procedure." Proceedings of the Symposium on Environmental Management for the 1990's, Lootens, D. J., Greenslade, W. M. and Barker, J. M., Eds., SME Annual Meeting, Denver, CO. (Bulk Sample)
129. Nagelschmidt, G. (1956). "Interlaboratory Trials on the Determination of Quartz Dusts of Respirable Size," Analyst (London) 81, 210-219. (Evaluation)
130. Nagelschmidt, G., Gordon, R. L., and Griffin, O. G. (1952). "Surface of Finely-Grained Silica," Nature (London) 169, 539-540. (Amorphous)
131. Nakamura, T., Sameshima, K., Okunaga, K., Susuva, Y., and Sato, J. (1989). "Determination of Amorphous Phase in Quartz Powder by X-ray Powder Diffractometry," Powder Diffr. 4, 9-13. (Amorphous)
132. Nenadic, C. M., and Crable, J. V. (1971). "Application of X-ray Diffraction to Analytical Problems of Occupational Health," Am. Ind. Hyg. Assoc. J. 32, 529. (Toxicology)
133. O'Connor, B. H., and Rowan, M. D. (1988). "Application of the Rietveld Refinement Procedure in Assaying Powdered Mixtures," Powder Diffr. 3, 2-6. (Bulk Anal.)
134. O'Connor, B. H., and Joklevic, J. M. (1981). "Characterization of Ambient Aerosol Particulate Samples from the St. Louis Area by X-ray Powder Diffractometry," Atmos. Environ. 15, 1681-1690. (Filter)
135. O'Connor, B. H., and Chang, W.-J. (1986). "The Amorphous Character and Particle Size Distributions of Powders Produced with the Micronizing Mill for Quantitative X-ray Powder Diffractometry," X-Ray Spectrom. 15, 267-270. (Amorphous)
136. Orberg, M. (1968). "Evaluation of Quartz in Airborne Dust in the 0.5 to 2-micron Size Range," Environ. Sci. Technol. 10, 795. (Filter)
137. Ostrovsky, I. A. (1967). "Some Sources of Error in Phase-Equilibrium at Superhigh Pressure. Phase Diagram for Silica," J. Geol. 5, 321-328. (Minerals)
138. Pawloski, G. A. (1985). "Quantitative Determination of Mineral Content of Geological Samples by X-ray Diffraction," Am. Mineral. 70, 663-667. (Bulk Anal.)
139. PDF (1991). "Powder Diffraction File," International Center for Diffraction Data, Swarthmore, PA. (Minerals)
140. Pickard, K. J., Walker, R. F., and West, N. A. (1985). "A Comparison of X-ray Diffraction and Infra-red Spectrophotometric Methods for the Analysis of α-Quartz in Airborne Dusts," Ann. Occup. Hyg. 29. 149-167. (Evaluation)
141. Plowman, C. (1978). "Determination of Minimum Detectable Amounts of Atmospheric participates by X-ray Diffractometry," Analyst, London 103, 982-985. (Filter)
142. Pollack, S. S. (1975). "X-ray Diffraction from Micrograms of Quartz on Filters Using a Rotating Anode," Am. Ind. Hyg. Assoc. J. 73-75. (Filter)
143. Popovic, S., and Grzeta, B. (1989). "Dilution and Addition Methods in Quantitative Diffraction Phase Analysis," in X-ray Neutron Structure Analysis in Materials Science, in Proc. Int. Conf. Adv. Methods: X-ray Neutron Struct. Anal. Of Mater., edited by J. Hasek (Plenum, New York), pp. 29-41. (Bulk Anal.)
144. Raab, G. A. (1988). "Semiquantitative Analysis by X-ray Powder Diffraction (SQXRD) of the <2 mm to 0.002 mm and <0.002 mm factors of Soil," Powder Diffr. 3, 144-152. (Automation)
145. Renault, J. (1987). "Quantitative Phase Analysis by Linear Regression of Chemistry on X-ray Diffraction Intensity," Powder Diffr. 2, 96-98. (Theory)
146. Rietveld, H. M. (1969). "A Profile Refinement Method for Nuclear and Magnetic Structures," J. Appl. Crystallogr. 2, 65-71. (Theory)
147. Ripanucci, G. (1983). "Evaluation of the Matrix Effect in X-ray Diffraction Analysis of Powders. (Applications in the Determination of Free Crystalline Silica)," Rev. Infort. Mal. Prof. 70, 289-304. (Filter)
148. Rius, J., Plana, F., and Palanques, A. (1987). "A Standerdless X-ray Diffraction Method for the Quantitative Analysis of Multiphase Mixtures," J. Appl. Crystallogr. 20, 457-460. (Theory)
149. Samimi, B. (1973). "Silica Dust in Sand Blasting Operations," Ph.D. thesis, Tulane University, New Orleans, LA. (Filter)
150. Schliephake, R. W. (1956). "X-ray Determination of Quartz in Mine Dusts," Bergbau Arch. 19, 1-2. (Bulk Anal.)
151. Schliephake, R. W. (1961). "Present Development of a Quantitative X-ray Crystallographic Method for Determining Quartz in Coal Mine Dusts. I," Staub 21, 1-5. (Bulk Anal.)
152. Schliephake, R. W. (1962). "Present Development of a Quantitative X-ray Crystallographic Method for Determining Quartz in Coal Mine Dusts. II," Staub 22, 364-372. (Bulk Anal.)
153. Schliephake, R. W. (1963). "Verfahrung zur routinemaessigen Roentgenographischen Quarzbestimmung in Grubenstaeuben des Steinkahlenberghus." (Procedure for the Routine X-ray Determination of Quartz in Mine Dusts from Bitumenous Coal Mines.) Glueckauf 99, 79-83. (Filter)
154. Schliephake, R. W. (1967). "Direct Determination of the Mass Absorption Coefficient for X-ray Phase Analysis," Neues. Jahrb. Mineral. Abh. 103, 192-203. (Bulk Anal.)
155. Schliephake, R. W. (1970). "X-ray Phase Analysis with Electronic Data Processing," Neues. Jahrb. Mineral. Abh. 112, 302-319. (Automation)
156. Schliephake, R. W. (1971). "Sample Holder for X-ray Diffraction Surveys of Very Thin Powder Samples," Neues. Jahrb. Mineral. Monatsch. 1, 24-26. (Sample Prep.)
157. Schliephake, R. W. (1971). Ergbn. Unters. Geb. Staub-u. Silikosebekampf Steinkohlenbergau 8, 77. (Bulk Anal.)
158. Schmelzer, L. L. (1951). "A Rapid X-ray Diffraction Method for the Determination of Quartz in Industrial Dusts," A. M. A. Arch. Ind. Hyg. Occup. Med. 3, 121-128. (Bulk Anal.)
159. Schmelzer, L. L. (1955). "The Origin of Industrial Dusts - An X-ray Method for Determining," Am. Ind. Hyg. Assn. Q. 16, 68-72. (Bulk Anal.)
160. Schreiner, W. N. (1990). "0.01% Silica Detection," Quantitative Analysis Workshop, Denver X-ray Conference, July 31. (Bulk Anal.)
161. Schriener, W. N., and Jenkins, R. (1982). "Profile Fitting for Quantitative Analysis in X-ray Powder Diffraction," Adv. X-Ray Anal. 26, 141-147. (Theory)
162. Smith, D. K. (1992). "Advances in Qualitative and Quantitative XRD Analysis by Whole-Pattern Methods," Adv. X-Ray Anal. 35, 1-14. (Theory)
163. Smith, D. K., and Gorter, S. (1991). "Powder Diffraction Program Information 1990 Program List," J. Appl. Crystallogr. 24, 369-402. (Automation)
164. Smith, D. K., and Barrett, C. S. (1979). "Special Handling Problems in X-ray Diffractometry," Adv. X-Ray Anal. 22, 1-12. (Sample Prep.)
165. Smith, D. K., Nichols, M. C., and Zolensky, M. E. (1982). "POWD10. A FORTRAN IV Program for Calculating X-ray Powder Diffraction Patterns - Version 10," The Pennsylvania State University, University Park, PA., pp.103 (Theory)
166. Smith, D. K., Johnson, Jr, G. G. and Ruud, C. O. (1986). "Clay Mineral Analysis by Automated Powder Diffraction Analysis Using the Whole Diffraction Pattern," Adv. X-Ray Anal. 29, 217-224. (Bulk Anal.)
167. Smith, D. K., Johnson, Jr., G. G., Scheible, A., Wims, A. M., Johnson, J. L., and Ullmann, G. (1987). "Quantitative X-ray Powder Diffraction Method using the Full Diffraction Pattern," Powder Diffr. 2, 73-77. (Bulk Anal.)
168. Smith, D. K., Johnson, Jr., G. G., and Wims, A. W. (1988). "Use of Full Diffraction Pattern Spectra, Both Experimental and Calculated, in Quantitative Powder Diffraction Analysis," Aust. J. Phys. 41, 311-321. (Theory)
169. Smith, D. K., Johnson, Jr., G. G., Kelton, M. J., and Anderson, C. A. (1989). "Chemical Constraints in Quantitative X-ray Powder Diffraction for Mineral Analysis of Sand-Silt Fraction of Sedimentary Rocks," Adv. X-Ray Anal. 32, 489-496. (Bulk Anal.)
170. Smith, D. K., Sterner, S. M., Kerrick, D. M., and Meddaugh, W. S. (1984). "Multiphase Quantitative Analysis of Colorado Oil Shales Involving Overlap of the Diffraction Peaks," Adv. X-Ray Anal. 27, 355-362. (Bulk Anal.)
171. Smith, S. T., and Snyder, R. L. (1979a). "Minimization of Preferred Orientation in Powder by Spray Drying," Adv. X-Ray Anal. 22, 77-88. (Sample Prep.)
172. Smith, S. T., and Snyder, R. L. (1979b). "Quantitative Phase Analysis of Devonian Shales by Computer-Controlled X-ray Diffraction of Spray-Dried Samples," Adv. X-Ray Anal. 22, 181-191. (Bulk Anal.)
173. Snyder, R. L. (1991). "The Use of Reference Intensity Ratios in Quantitative Analysis," Conference on Applied Crystallography, Prague, August 1990, Czechoslovakia Academy of Sciences. (Theory)
174. Snyder, R. L., and Bish, D. L. (1989). "Quantitative Analysis," in "Modern Powder Diffraction," edited by L. Bish and J. E. Post, Mineralogical Society of America, Short Course Notes 20, p101-144. (Bulk Anal.)
175. Snyder, R. L., Hubbard, C. R., and Panagiotopolous, N. C. (1981). "AUTO: A Real Time Diffractometer Control System." NBSIR 81-2229, National Institute of Standards and Technology, Gaithersburg, MD. (Automation)
176. Snyder, R. L., Hubbard, C. R., and Panagiotopolous, N. C. (1982). "A second Generation Automated Powder Diffraction Control System," Adv. X-Ray Anal. 25, 245-260. (Automation)
177. Snyder, R. L., and Hubbard, C. R. (1984). "NBS*QUANT84: A System for Quantitative Analysis by Automated X-ray Powder Diffraction," NBS Special Publication. (Automation)
178. Sosman, R. B. (1955). "New and Old Phases of Silica," Trans. Brit. Ceram. Soc. 54, 655-670. (Minerals)
179. SRM-1878 (1983). "Respirable Quartz," National Institute for Standards and Technology, Office of Standard Reference Data, Certificate Analysis. (Calibration)
180. SRM-1879 (1983). "Respirable Cristobalite," National Institute for Standards and Technology, Office of Standard Reference Data. Certificate of Analysis. (Calibration)
181. Stefanov, D. D. (1972). "Quantitative X-ray Phase Analysis of Quartz and Cristobalite," Mineral. Petrog. Mitt. 21, 49-62. (Bulk Anal.)
182. Stevanov, D., and Dobreva, M. (1972). Trans. Sci. Res. Inst. Prot. Lab., Ind. Div. Sof. 23, 190. (Bulk Anal.)
183. Swallow, G. L. (1978). Annual AIHA Meeting, Los Angeles, 1978, and AIHA Accreditation News & Notes, Aug. 1978, American Hygiene Assoc., Akron, OH. (Evaluation)
184. Swallow, G. L. (1980). Laboratory Directors' Meeting, Houston, 1980, and AIHA Accreditation News & Notes, Aug. 1980. American Hygiene Assoc., Akron, OH. (Evaluation)
185. Talvitie, N. A., and Brewer, L. W. (1962). "X-ray Diffraction
186. Taylor, M. (1978). "Methods for the Quantitative Determination of Asbestos and Quartz in Bulk Samples Using X-ray Diffraction," Analyst. London 103, 1009-1020. (Bulk Anal.)
187. Taylor, J. C. (1991). "Computer Programs for Standardless Quantitative Analysis of Minerals Using the Pull Powder Diffraction Profile," Powder Diffr. 6, 2-9. (Automation)
188. Tossavainen, A. (1979). "Determination of Quartz on Membrane Filters by X-ray Diffraction," Scand. J. Work Environ. Health 5, 379-385. (Filter)
189. Trostel, L. L., and Wynne, D. L. (1940). "Determination of Quartz (Free Silica) in Refractory Clays," J. Am. Ceram. Soc. 23, 18-22. (Bulk Anal.)
190. Visser, J. W., and de Wolff, P. M. (1964). "Absolute Intensities," Rep. 641.109, Technische Physische Dienst, Delft, Netherlands. Reprinted Powder Diffr. 3, 202-204. (Theory)
191. Volborth, A. (1963). "Total Instrumental Analysis of Rocks," Rep. 5, Nevada Bureau of Mines, pp85. (Bulk Anal.)
192. Waersted, K. R. (1986). "Quantitative X-ray Diffraction Analysis of Calcium Sulfates and Quartz in Wet-Process Phosphoric Acid Filter Cakes," Adv. X-Ray Anal. 29, 211-216. (Bulk Anal.)
193. Wang, H. (1988). "A Method for Quantitative X-ray Phase Analysis Without Standards," Powder Diffr. 3, 165-167. (Theory)
194. Wang, S., and Pu, X. (1991). "General Expression of Quantitative Phase Analysis for Samples Containing Amorphous Phase," Powder Diffr. 6, 62-65. (Theory)
195. Warner, P. O., Saad, L., and Jackson, J. O. (1972). "Identification and Quantification Analysis of Particulate Air Contaminants by X-ray Diffraction Spectrometry," J. Air Pollut. Cont. Assn. 22, 887-890. (Bulk Anal.)
196. Werner, P.-E., Salome, S., Malmros, G., and Thomas, J. D. (1979). "Quantitative Analysis of Multicomponent Powders by Full-Profile Refinement of Guinier-Hagg X-ray Film Data," J. Appl. Crystallogr. 12, 107-109. (Bulk Anal.)
197. Wiles, D. R., and Young, R. A. (1981). "A New Computer Program for Rietveld Analysis of X-ray Powder Diffraction Patterns," J. Appl. Crystallogr. XX, 149-151. (Automation)
198. Williams, P. P. (1959). "Direct Quantitative Diffractometric Analysis," Anal. Chem. 31, 1842-1844. (Bulk Anal.)
199. de Wolff, P. M. (1958). "Particle Statistics in X-ray Diffractometry," Appl. Sci. Res., Sect. B 7, 102-112. (Theory)
200. deWolt'f, P. M., Taylor, J. M., and Parrish, W. (1959). "Experimental Study of Effect of Crystallite Size Statistics on X-ray Diffractometer Intensities," J. Appl. Phys. 30, 63-69. (Theory)
201. Wong, E., Yeko, J., Engler, P., and Gerron, R. A. (1983). "SCRIP - FORTRAN IV Software for Quantitative XRD," Adv. X-Ray Anal. 26, 157-162. (Automation)
202. Wright, G. W. (1978). "The Pulmanory Effects of Inhaled Inorganic Dust," in Industrial Hygiene and Toxicology, edited by C. D. Clayton and F. E. Clayton (Wiley Interscience, New York) Chap. 7. (Toxicology)
203. Zevin, L. (1977). "A Method of Quantitative Phase Analysis without Standards," J. Appl. Crystallogr. 10, 147-150. (Theory)
204. Zevin, L., and Zevin, S. (1989). "Standardless Quantitative X-ray Phase Analysis - Estimation of Precision," Powder Diffr. 4, 196-200. (Theory)
205. Zevin, L. S., and Kimmel, G. (1995). Quantitative X-ray Diffractometry (Springer-Verlag, New York), pp. 372. (Theory)
206. Zenker, F. A. (1867). "Uber Staubinhalationkrankhieten der Lungen" (Diseases of the Lung Due to Excessive Inhalation of Dust.). Deut. Arch. Klin. Med. 2, 116. (Toxicology)