The role of the fibre in the structural hierarchy of paper

Fundamentals of Papermaking Materials

Volumn 1, Issue , 1997, Pages 351-399

  Kortschot, M T ^a  

^a UNIVERSITY OF TORONTO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

FIBERS; LIGNIN; MATERIALS SCIENCE; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; MOLECULES; STRUCTURE (COMPOSITION); NATURAL FIBERS;

POLYMER FILM; STRUCTURAL HIERARCHY;

PAPER;

FIBERS; LIGNINS; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; MOLECULES; PAPER; PAPER INDUSTRY; PAPER PROPERTIES; STRUCTURES;

EID: 0031319067     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (144)

1. FRC-1: Fundamentals of Papermaking Fibres, ed. F. Bolam, British Paper and Board Makers Assoc. London, (1958).
2. FRC-2: The Formation and Structure of Paper, ed. F. Bolam, British Paper and Board Makers Assoc., London (1962).
3. FRC-3: Consolidation of the Paper Web, ed. F. Bolam, British Paper and Board Makers Assoc., London (1966).
4. FRC-5 The Fundamental Properties of Paper Related to Its Uses, ed. F. Bolam, British Paper and Board Ind., London (976).
5. FRC-6: Fibre Water Interactions in Papermaking, ed. Fund.Res.Committee, British Paper and Board Ind., London (1978).
6. FRC-8: Papermaking Raw Materials, ed. V.W. Punton, Mechanical Engineering Publications, London (1985).
7. FRC-9: Fundamentals of Papermaking, ed. C.F. Baker and V.W. Punton, Mechanical Engineering Publications, London (1989).
8. FRC-10: Products of Papermaking, ed. C.F. Baker, Pira International, Leatherhead, U.K., (1993).
9. Rance, H.F., "Introduction to symposium.", in FRC-2, p. 1-11, (1962).
10. Bristow, J.A., Kolseth, P, Preface to Paper Structure and Properties, Marcel Dekker, New York, pp. iii-vi, (1986).
11. The New Penguin English Dictionary, Middlesex, Penguin, (1986).
12. Retulainen, E. "Fibre properties as control variables in papermaking? Part 1. Fibre properties of key importance in the network.", Paperi ja Puu, 78, pp. 187-194 (1996).
13. Lakes, R., "Materials with structural hierarchy.", Nature, 361, pp. 511-515, (1993).
14. Frey-Wyssling, A., "The general structure of fibres.", in FRC-1, p. 1-6 (1958).
15. Emerton, H.W., "The fibrous raw materials of paper" in Handbook of Paper Science V1, ed. H.F. Rance, Elsevier, Amsterdam, pp. 91-138 (1982).
16. Ashby, M.F., Jones, D.R.H., Engineering Materials 2, Pergammon, Oxford (1986).
17. Ashby, M.F., Jones, D.R.H, Engineering Materials 1, Pergammon, Oxford (1980).
18. Page, D.H., "A Theory for the Tensile Strength of Paper," Tappi J., 52 (4), pp. 674-681, (1969).
19. Ramasubramanian, M. K., Perkins, R. W., "Computer Simulation of the Uniaxial Elastic-Plastic Behavior of Paper," Journal of Engineering Materials and Technology, 110, pp. 117-123, (1988).
20. Feldman, H., Jayaraman, H., Kortschot, M.T., "A Monte Carlo Simulation of Paper Deformation and Failure.", J. Pulp and Paper Science., 22(10), pp. J386-J391 (1996).
21. Van den Akker, J.A. "Some theoretical considerations on the mechanical properties of fibrous structures.", in FRC-2, pp. 205-241 (1962).
22. Shallhorn, P., Karnis, A., "Tear and Tensile Strength of Mechanical Pulps," Transactions of the Technical Section - CPPA, 5(4), pp. TR92-TR99 (1979).
23. Salmen, L., "The Cell Wall as a Composite Structure.", in Paper Structure and Properties, ed. J. A. Bristow, P. Kolseth, Marcel Dekker, New York, pp. 51-74 (1986).
24. Wong, L., Kortschot, M.T., Dodson, C.T.J., "Effect of Formation on Local Strain Fields and Fracture of Paper.", J. Pulp and Paper Science, 22(6), pp. J213-J219 (1996).
25. Pommier, J.C., Poustis, J., Fourcade, E., Morlier, P., "Determination of the critical load of a corrugated cardboard box submitted to vertical compression forces by finite element methods.", Proc. 1991 International Paper Physics Conference, Kona, Hawaii, Sept. 22-26, pp. 437-447, (1991).
26. Nissan, A.H., Batten, G.L. Jr., "On the primacy of the hydrogen bond in paper mechanics.", Tappi J., 73(2), pp. 159-164 (1990).
27. Nissan, A.H., Byrd, V.L., Batten, G.L. Jr., Ogdon, R.W., "Paper as an H-bond dominated solid in the elastic an plastic regines.", Tappi J., 68(9), pp. 118-123 (1985).
28. Dodson, C.T.J., Herdman, P.T., "Mechanical properties of paper.", in Handbook of Paper Science V2, ed. H.F. Rance, Elsevier, Amsterdam, pp. 71-126, (1982).
29. Page, D.H., "The rheology of paper in terms of its molecular structure.", Tappi J., 46(12), pp. 750-756 (1963).
30. Chan, K., Kortschot, M.T., Dodson, C.T.J., "A Look-up Table Approach for Simulating Two-Dimensional Fibre Networks.", J. Pulp and Paper Science, 21, pp. J92-J95 (1995).
31. Kibblewhite, R.P., "Effects of pulp drying and refining on softwood fibre wall structural organsations.", in FRC-9, pp. 121-152 (1989).
32. Page, D.H., "The beating of chemical pulps - the action and the effects.", in FRC-9, pp. 1-38, (1989).
33. Kolseth, P., De Ruvo, A., "The cell wall components of fibers" in Paper Structure and Properties, Marcel Dekker, New York, pp. iii-vi, (1986).
34. Clark, J.d'A., Pulp Technology and Treatment for Paper, 2nd ed., Miller Freeman, San Francisco (1985).
35. Casey, J., Pulp and Paper Chemistry and Chemical Technology, 2nd ed., Interscience, New York (1960).
36. Ranby, B.G., "The fine structure of cellulose fibrils.", in FRC-1, pp. 55-82. (1958).
37. Hirst, E.L., "Chemical structure in the hemicellulose group.", in FRC-1, pp. 93-105, (1958).
38. Jarasek, L., "Toward a three-dimensional model of lignin structure.", J. Pulp and Paper Science, 21(8), pp. J274-J279 (1995).
39. Lignin properties and materials, ed. W.G. Glasser, S. Sarkanen, ACS Symposium Series 397, American Cheical Society, Washington (1989).
40. Attala, R.H., Studies of Polymorphy in Native Cellulose, in FRC-8, pp. 59-75, (1985).
41. Wood and Cellulose Chemistry, ed. D.N.-S. Hon, N. Shiraishi, Marcel Dekker, New York (1991).
42. Mark, R.E., "Fiber structure." in Handbook of Physical and Mechanical Testing of Paper and Paperboard, V2, ed. R.E. Mark, Marcel Dekker, New York, pp. 445-484 (1985).
43. Page, D.H, Seth, R.S., El-Hosseiny, F., "Strength and chemical composition of wood pump fibres.", in FRC-8, pp. 77-91 (1985).
44. Frey-Wysling, A., Discussion Session comment, in FRC-1, pg. 27, (1958).
45. Karnis, A., "The mechanism of fibre development in mechanical pulping.", J. Pulp and Paper Science 20(10), pp. J280-J288 (1994).
46. Jayme, G., and Hunger, G., "Electron Microscope 2- and 3-dimensional classification of fibe bonding.", in FRC-2, pp. 135-170, 1962.
47. Atack, D., "Advances in Beating and refining.", in FRC-6, pp. 261-295 (1977).
48. Scallan, A.M., "The accommodation of water within pulp fibres.", in FRC-6, pp. 9-27 (1978).
49. Giertz, H.W., "The effects of beating on individual fibres.", in FRC-1, pp. 389-409 (1958).
50. Steenburg, B., "Beating and the mechanical properties of paper, a critical review.", in FRC-1, pp. 229-240 (1958).
51. Buchanan, J.G, and Lindsay, R.A., "A note on structure of paper as revealed by the scanning electron microscope.", in FRC-2, pp. 101-108, (1962).
52. Scallan, A.M., "The structure of the cell wall of wood - a consequence of anisotropic inter-microfibrillar bonding.", Wood Science, 6(3), pp. 266-271 (1974).
53. Jayme, G., Hunger, G., "The rearrangement of microfibrils in dried cellulose and the implication of this structure alteration on pulp properties.", in FRC-1, pp. 263-270, (1957).
54. Linstrom, T., "The porous lamellar structure of the cell wall.", in Paper Structure and Properties, Marcel Dekker, New York, pp. 99-119 (1986).
55. Weise, U., Paulapuro, H., "Changes of fibre dimensions during drying.", Proc. of the 1995 International Paper Physics Conference, Niagara-on-the-Lake, Sept. 11-14, pp. 121-124 (1995).
56. Mark, R.E., Gillis, P.P., "Mechanical Properties of Fibres.", in Handbook of Physical and Mechanical Testing of Paper and Paperboard, V1, ed. R.E. Mark, New York, Marcel Dekker, pp. 409-495 (1985).
57. Groom, L.H., Shaler, S.M., Mott, L., "Characterizing micro-and macro-mechanical properties of single wood fibres.", Proceedings of the 1995 International Paper Physics Conference, Niagara-on-the-Lake, Sept. 11-14, pp. 13-22 (1995).
58. Cowan, W.F., Cowdrey, E.J.K, "Evaluation of paper strength components by short-span tensile analysis.", Tappi J., 57(2), pp. 90-93 (1974).
59. Kallmes, O.J., Perez, M., "Load/Elongation properties of fibres.", in FRC-3, pp. 507-528, (1965).
60. Alexander, S.D., Marton, R., McGovern, S.D., "Effect of beating and wet pressing on fiber and sheet properties I. Individual fibre properties.", Tappi J., 51(6), pp. 277-283, (1968).
61. Hardacker, K.W., "Effects of loading rate, span, and beating, on individual wood fiber tensile properties.", Proc. of The Physics and Chemistry of Wood Pulp Fibers, Appleton, May 12-15, pp. 201-211, (1995).
62. Page, D.H., El-Hosseiny, F., Winkler, K., Bain, R., "The mechanical properties of single wood-pulp fibres. Part I: A new approach., Pulp and Paper Magazine of Canada, 73(8), T198-T203, (1972).
63. El-Hosseiny, F., Page, D.H., "The mechanical properties of single wood-pulp fibres. Part II: Theories of strength.", Fiber Science and Tech., 8, pp. 21-31 (1975).
64. Page, D.H., El-Hosseiny, F., Page, D.H., "The mechanical properties of single wood-pulp fibres. III. The effect of drying stress on strength.", J.Ap.Polym.Sci., 19, pp. 1549-1561 (1975).
65. Page, D.H., El-Hosseiny, F., "The mechanical properties of single wood-pulp fibres. Part IV: The influence of defects.", Svensk Papperstidn., 14, pp. 471-474 (1976).
66. Page, D.H., El-Hosseiny, F., Winkler, K., Lancaster, P., "The mechanical properties of single wood-pulp fibres. Part V. Elastic modulus.", Tappi J., 60(4), pp. 114-117 (1977)
67. Page, D.H., El-Hosseiny, F., Winkler, K., "Behaviour of single wood fibres under axial tensile strain.", Nature, 229, No. 5282, Jan. 22, 1971, pp. 252-253.
68. Page, D.H, El-Hosseiny, F., Winkler, K., and Lancaster, A.P.S., "Elastic modulus of single wood pulp fibres.", Tappi J., 60(4), pp. 114-117 (1977).
69. Paavilainen, L., "Influence of fibre morphology and processing on the softwood sulphate pulp fibre and paper properties.", Doctor for Technology Dissertation, Helsinki University of Technology (1993).
70. Mark, R.E., "Structure and structural anisotropy.", in Handbook of Physical and Mechanical Testing of Paper and Paperboard, V2, ed. R.E. Mark, Marcel Dekker, New York, pp. 283-377 (1985).
71. Jang, H.F., Roberston, A.G., Seth, R.S., "Optical sectioning of pulp fibres with confocal scanning laser microscopy.", Proc. of the 1991 International Paper Physics Conference, Kona, Hawaii, Sept. 22-26, pp. 277-279 (1991).
72. Page, D.H., Seth, R.S., Jordan, B.D., Barbe, M.C., "Curl, crimps, kinks and microcompressions in pulp fibres - their origin, measurements and significance.", in FRC-8, pp. 183-227 (1985).
73. Mohlin, U., Dahlbom, J., Hornatowska, J., "Fiber deformation and sheet strength.", Tappi J., 60(6), pp. 105-111 (1996).
74. Kibblewhite, R.P., Tappi J., 60(10), pp. 141 (1977).
75. Olson, J.A., Robertson, A.G., Finnigan, T.D., Turner, R.R.H., "An analyzer for fibre shape and length.", J. Pulp and Paper Science, 21(11), pp. J367-J373 (1995).
76. Geath, L.R., Neill, M.T., Masse, F.A., "Latency in mechanical wood pulps.", Pulp and Paper Magazine of Canada, 67(10), pp. T423-T430 (1966).
77. Karnis, A., "Latency in mechanical pulp fibres.", Paperi ja Puu, 75(7), pp. 505-510 (1983).
78. Lawryshyn, Y.A., Kuhn, D.C.S., "Large delection analysis of wet fibre flexibility measurement techniques.", J. Pulp and Paper Science, 22(11), pp. J423-J431 (1996).
79. Baum, G.A., "Subfraction mechanical properties.", in FRC-10, pp. 1-126, (1993).
80. Drouin, B., Gagnon, R., Schroder, A. Silvy, J., Butel, M., "High-resolution fibre orientation and basis weight measurement.", J. Pulp and Paper Science, 22(7), pp. J237-J241 (1996).
81. Uesaka, T., "Determination of fiber-fiber bond properties." in Handbook of Physical and Mechanical Testing of Paper and Paperboard, V2, ed. R.E. Mark, New York, Marcel Dekker, pp. 379-402 (1985).
82. De Silveira, G., Zhang, X. Berry, R., Wood, J.R., "Location of fines in mechanical pulp handsheets using scanning electron microscopy.", J. Pulp and Paper Science 22(9), pp. J315-320 (1996).
83. Fellers, C., Andersson, H., Hollmark, H., "The definition and measurement of thickness and density." in Paper Structure and Properties, ed. J. A. Bristow, P. Kolseth, Marcel Dekker, New York, pp. 151-168 (1986).
84. Gorres, J, Sinclair, C.S., Tallentire, A., "An interactive multi-planar model of paper structure." Paperi ja Puu, 71(1), pp. 54-59 (1989).
85. Gorres, J., Luner, P., "An apparent density model of paper.", J. Pulp and Paper Science, 18(4), pp. J127-130 (1992).
86. Komori, T., Makishima, K. "Numbers of fibre to fibre contacts in general fibre assemblies." Textile Research Journal, 47(1), pp. 13-17, (1977).
87. Deng, M., Dodson, C.T.J., Paper, An Engineered Stochastic Structure, Tappi Press, Atlanta, (1994).
88. J. Lee, "Relationships Between Properties of Pulp-Fibre and Paper.", Ph.D. Thesis, Department of Forestry, University of Toronto, Toronto, Ontario, Canada (1993).
89. Hatton, J.V., "Pulping and papermaking properties of managed second-growth softwoods.", Tappi J., 80(1), pp. 178-184, (1997).
90. Paavilainen, L., "Effect of sulphate cooking parameters on the paper making potential of pulp fibres.", Paperi ja Puu, 71(4), pp. 356-363 (1989).
91. Paavilainen, L, "Importance of particle size - fibre length and fines - for the characterization of softwood kraft pulp.", Paperi ja Puu, 72(5), pp. 516-526 (1990).
92. Paavilainen, L, "Importance of cross-dimensional fibre properties and coarseness for the characterisation of softwood sulphate pulp.", Paperi ja Puu, 75(5), pp. 343-351 (1993).
93. Paavilainen, L., "Wet fibre flexibility and collapsability of softwood pulp fibres.", Paperi ja Puu, 75(9-10), pp. 689-702 (1993).
94. Paavilainen, L., "Bonding properties of softwood sulphate pulps.", Paperi ja Puu, 76(3), pp. 162-173 (1994).
95. Pavilainen, L., "Influence of morphological properties of wood fibres on sulphate pulp fibre and paper properties.", Proceedings of the 1991 International Paper Physics Conference, Kona, Hawaii, Sept. 22-26, pp. 383-395 (1991).
96. Paavilainen, L., "The possibility of fractionating softwood sulfate pulp according to cell wall thickness.", Appita J., 45(5), pp. 319-326 (1992).
97. Karnis, A. "Latency in mechanical pulp fibres.", Paperi ja Puu, 75(7), pp. 505-510, (1993).
98. Page, D.H., Barbe, M.C., Seth, R.S., Jordan, B.D., "The mechanism of curl creation removal and retention in pulp fibres.", J. Pulp and Paper Science, 10(5), pp.J74-J79 (1984).
99. Mohlin, U.-B., "Fibre Development during mechanical pulp refining,.", J. Pulp and Paper Science, 23(1), pp. J28-J33 (1997).
100. Page, D.H., Tydeman, P.A., A "A new theory of the shrinkage, structure and properties of paper.", in FRS-2, pp. 397-413, (1962).
101. Nanko, H. Asano, S, Ohsawa, J., "Shrinking Behavior of pulp fibers during drying.", Proceedings of the 1991 International Paper Physics Conference, Kona, Hawaii, Sept. 22-26, 2, pp. 365-373 (1991).
102. Ihrman, C.B., Ohrn, O.E., "Extensible Paper by the Double-Roll Compacting Process.", FRS-3, pp. 410-434, (1965).
103. Retulainen, E., Moss, P. Nieminen, K., "Effect of fines on the properties of fibre networks," in FRC-10, pp. 727-782 (1993).
104. Jayaraman, K, Kortschot, M.T., "A critical look at the network models for the tensile strength of paper.", in preparation.
105. Lee, J., Roy, D.N., Hong, M., Whiting, P., "Relationships between properties of pulp-fibre and paper.", in FRC-10, pp. 159-182, (1993).
106. Clark, J. d'A, "Components of strength qualities of pulps.", Tappi J., (56)7, pp. 122-125 (1973).
107. Van den Akker, J.A., Lathrop, A.L., Voelker, M.H., and Dearth, L.R., "Importance of fiber strength to sheet strength.", Tappi J., 41(8), pp. 416-425 (1958).
108. Helle, T., "Some aspectson fibre strength and fibre bondings in sulphate and sulphite paper.", Svensk Papperstidning, 66(24), pp. 1015-1030, (1963).
109. Page, D.H., Tappi J., 77(3), pp. 201 (1994).
110. Yan, N., Kortschot, M.T., "Modelling of out-of-plane tear energy absorption of paper.", Appita J., 49(3), pp. 176-180 (1996).
111. Niskanen, K., "Strength and fracture of paper.", in FRC-10, pp.641-725 (1993).
112. de Ruvo, A. Fellers, C. Kolseth, P., "Descriptive theories for the tensile strength of paper.", in Paper Structure and Properties, Marcel Dekker, New York, pp.267-280 (1986).
113. Cox, H.L., "The elasticity and strength of paper and other fibrous materials.", British J. of Ap. Phys., 3(3), pp. 72-79 (1952).
114. Page, D.H., Seth, R.S., "The stress-strain curve of paper.", in FRC-8, pp. 421-452 (1981).
115. Page, D.H., Seth, R.S., "The elastic modulus of paper III. The effects of dislocations, microcompressions, curl, crimps, and kinks.", Tappi J., 63(10), pp. 99-102 (1980).
116. Schulgasser, K, Page, D.H., "The influence of transverse fibre properties on the in-plane elastic behaviour of paper.", Composites Science and Technology, 32, pp. 279-292 (1988).
117. Perkins, R.W.Jr., Sinha, S., Mark, R.E., "Micromechanics and contimuum models for paper materials of medium to high density.", Proc. of the 1991 International Paper Physics Conference, Kona, Hawaii, Sept 22-26, pp. 413-435 (1991).
118. Rigdahl, M., Hollmark, H., "Network mechanics.", in Paper Structure and Properties, ed. J. A. Bristow, P. Kolseth, Marcel Dekker, New York, pp. 241-266 (1986).
119. O. J. Kallmes, G. A. Bernier, G. A., Perez, M., "A mechanistic theory of the load-elongation properties of paper - in four parts," Paper Technology and Industry, Part 1 - 18(7), pp. 222-228
120. O. J. Kallmes, G. A. Bernier, G. A. Perez, M., "A mechanistic theory of the load-elongation properties of paper - in four parts," Paper Technology and Industry, Part 2 - 18(8), pp. 243-245
121. O. J. Kallmes, G. A. Bernier, G. A., Perez, M., "A mechanistic theory of the load-elongation properties of paper - in four parts," Paper Technology and Industry, Part 3 - 18(9), pp. 283-285
122. O. J. Kallmes, G. A. Bernier, G. A., Perez, M., "A mechanistic theory of the load-elongation properties of paper - in four parts," Paper Technology and Industry, Part 4 18(10), pp. 328-331, (1977).
123. Kallmes, O.J., Bernier, and M. Perez, "A Mechanistic Theory of the Load-Elongation Properties of Paper - A Descriptive Summary.", Paper Technology and Industry, 19(9), pp. 311-312. 1978.
124. Kärenlampi, P., "Effect of Distributions of Fibre Properties on Tensile Strength of Paper: A Closed-Form Theory," Journal of Pulp and Paper Science, 21(4) pp. J138-J143 (1995).
125. M. W. Kane, M.W., "Beating, Fibre Length Distribution and Tensile Strength - Part II," Pulp and Paper Magazine of Canada, 60(3), pp. T236-T240, (1960).
126. Piggott, M.R., "Preface: Ralistic models for fibre composites.", Composites Science and Technology, 53(2), pp. 121-122 (1995).
127. Corte, H, Kalmes, O.J., "Statistical Geometry of a fibrous Network.", in FRC-2, pp. 13-46, 1962.
128. Norman, B, Wahren, D., "Mass distribution and sheet properties.", in FRC-5, pp. 7-70 (1973).
129. Norman, B., "The formation of paper sheets.", in Paper Structure and Properties, Marcel Dekker, New York, pp. 123-150, (1986).
130. Corte, H. "The structure of paper.", in The Handbook of Paper Science, V2, ed. H.R. Rance, Amsterdam, Elsevier, pp. 1-70 (1982).
131. Chan, K, Kortschot, M.T., Dodson, C.T.J., "A Look-up table approach for simulating two-dimensional fibre networks.", J. Pulp and Paper Science, 21(3), pp. J92-J96 (1995).
132. Sampson, W.W., McAlpin, J., Kropholler, H.W., Dodson, C.T.J., "Hydrodynamic smoothing in the sheet forming process.", Proc. of the 81st CPPA Meeting, Montreal, pp. B1-B4, (1995).
133. Dodson, C.T.J., Schaffnit, C., "Flocculation and orientation effects on paper-formation statistics.", Tappi J. 75(1), pp. 167-171 (1992).
134. Norman, Bo, "Overview of the physics of forming.", FRC-9, pp. 73-149, (1989).
135. Kerekes, R.J, Soszynksi, R., Tam Doo, P.A., "The flocculation of pulp fibres.", in FRC-8, pp. 265-307, (1985).
136. Kerekes, R.J., Schell, C.J., "Characterization of fibre flocculation regines by a crowding factor.", J. Pulp and Paper Science, 18(1), pp. J32-J38 (1992).
137. Dodson, C.T.J., "A universal law of formation.", J. Pulp and Paper Science 16(4), pp. J136-137, (1990).
138. Farnood, R.R., Dodson, C.T.J, Loewen, S.R., Modeling flocculation part I: random disk model.", J. Pulp and Paper Science, 21(10), pp. 348-J356 (1995).
139. Kajanto, I.M., "Effect of formation on print uneveness.", Proceedings of the 1991 International Paper Physics Conference, Kona, Hawaii, Sept. 22-26, 1, pp. 281-290 (1991).
140. Norman, R.J., "Dependence of sheet properties on formation and forming variables.", in FRC-3, pp. 269-298 (1966).
141. Wong, L., Kortschot, M.T., Dodson, C.T.J., "Effect of Formation on Local Strain Fields and Fracture of Paper.", Journal of Pulp and Paper Science, 22(6), pp. J213-J219, (1996).
142. Lyne, M.B., Hazell, R., "Formation testing as a means of monitoring strength uniformity.", in FRC-5, pp. 74-100 (1974).
143. Thorpe, J.L, "Simulation of tensile properties of newsprint.", Appita, 36, pp. 198-204 (1982).
144. Korteoja, M.J., Lukkarinen, A., Kaski, K., Gunderson, D.E., Dahlke, J.L, Niskanen, K.J., "Local strain fields in paper.", Tappi J., 79(4), pp. 217-223 (1996).