Performance of reinforcement fibres in paper

Fundamentals of Papermaking Materials

Volumn 2, Issue , 1997, Pages 1177-1213

  Alava, M J ^a   Niskanen, K J ^b  

^a AALTO UNIVERSITY   (Finland)

^b KCL   (Finland)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MICROMECHANICS; DUCTILITY; FIBERS; TOUGHNESS; ELASTICITY; NATURAL FIBERS; REINFORCEMENT; STIFFNESS; STRENGTH OF MATERIALS;

MICROMECHANICAL STIFFNESS; REINFORCEMENT FIBRES; REINFORCED PAPER;

PAPER;

DUCTILITY; FIBERS; PAPER; TOUGHNESS;

EID: 0031283586     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (49)

1. U.B. Mohlin, K. Wennberg, "Some Aspects of the Interaction Between Mechanical and Chemical Pulps", Tappi 67, 90-93 (1984).
2. E.O. Fernandez and R.A. Young, "An Explanation for the Deviation from Linearity in Properties of Blends of Mechanical and Chemical Pulps", Tappi 77 (3), 221-224 (1994).
3. P. Kärenlampi, "Tensile Strength of Mixture of Two Pulps", J. Pulp Paper Sci. 21, J432-J436 (1995).
4. R. Ritala, "Geometrical Scaling Analysis of Fibre Network: Effect of Reinforcement Pulp", Nordic Pulp Paper Res J. 2 (Special Issue), 15-18 (1987).
5. K. Niskanen, K., N. Nilsen, E. Héllen, and M. Alava, "KCL-PAKKA: Simulation of the 3D Structure of Paper", published elsewhere in these proceedings.
6. M.J. Alava and R.K. Ritala, "Fracture of Random Fibre Networks With Non-central Forces", J. Phys. Cond. Matter 2, 6093-6107 (1990).
7. J. Tobocnik, D. Laing, and G. Wilson, "Random Walk Calculation of Conductivity in Continuum Percolation", Phys. Rev. V41, 3052-3058, (1988).
8. P. M. Duxbury, P. D. Beale, C. Moukarzel, "Breakdown of Two-phase Random Resistor Networks", Phys. Rev. B51 (6), 3476-3488
9. C. Moukarzel and P. M. Duxbury, "Failure of Three-dimensional Random Composites", J. Appl. Phys. 76, 4086-4094 (1994).
10. R.K. Ritala, "Comment on the Percolation Theory of Fibrous Networks", Tappi 72 (2), 179-182 (1989).
11. P. Kärenlampi, "The Effect of Fiber Connectivity on Reinforcing Efficiency", J. Pulp Paper Sci. 22(1), J31-J37 (1996).
12. M.J. Alava and K.J. Niskanen, "Comment on "The Effect of Fibre Connectivity on Reinforcing Efficiency"", J. Pulp Paper Sci. 22(11), J409 (1996).
13. J. Åström, S. Saarinen, K. Niskanen and J.Kurkijärvi, "Microscopic Mechanics of Fiber Networks", J. Appl. Phys. 75, 2383-2392 (1994)
14. V.I. Räisänen, M.J. Alava, K.N. Niskanen, and R.M. Nieminen, "Does the Shear-Lag Model Apply to Random Fiber Networks?", submitted for publication in J. Mat. Res.
15. G. E. Pike and C.H. Seager, "Percolation and Conductivity II: A Computer Study", Phys. Rev. B10, 1435-1446 (1974).
16. K.J. Niskanen and M.J. Alava, "Planar Fiber Networks out of Flexible Fibers", Phys. Rev. Lett. 73, 3475-3478 (1994).
17. D. H. Page and R. S. Seth, "The Elastic Modulus of Paper. II The Importance of Fiber Modulus, Bonding and Fiber Length", Tappi 63 (8), 113-116 (1980).
18. H.L. Cox, "The Elasticity and Strength of Paper and Other Fibrous Materials", British J. Appl. Phys. 3, 72-79 (1952)
19. M.R. Piggott, "Load Bearing Fiber Composites" (Pergamon, Oxford, 1980).
20. C. Galiotis, "A Study of Mechanisms of Stress Transfer in Discontinuous Fiber Model Composites by Raman Spectroscopy" Comp. Sci. Techn. 48, 15-28 (1989).
21. C. Galiotis, R.J. Young, P.H.J. Yeung, D.N. Batchelor, "The Study of Model Polydiacetylene/Epoxy Composites; Part I: The Axial Strain in the Fibre", J. Mat. Sci. 19, 3640-3648 (1984).
22. D.T. Grubb, Z.F. Li, and S.L. Phoenix, "Measurement of Stress Concentration in a Fiber Adjacent to a Fiber Break in a Model Composite", Comp. Sci. Techn. 54, 237-251 (1995).
23. M. Murat, M. Anholt, and H. D. Wagner, "Fracture Behavior of Short-fiber Reinforced Materials", J. Mater. Res. 7, 3120-3131 (1992).
24. M. Kellomäki, J. Timonen, M. Alava, K. Niskanen, in preparation.
25. L. Monette, M. P. Anderson, and G. S. Grest, "Effect of Volume Fraction and Morphology of Reinforcing Phases in Composites", J. Appl. Phys. 75, 1155-1172 (1994).
26. B. F. Blumentritt, B. T. Vu, and S. L. Cooper, "Mechanical Properties of Discontinuous Fiber Reinforced Thermoplastics. II. Random-in-plane Fiber Orientation", Polym. Eng. Sci. 15, 428-436 (1975).
27. F. Erdogan and P.L. Joseph, "Toughening of Ceramics through Crack Bridging by Ductile Particles", J. Am. Ceram. Soc. 72, 262-270 (1989).
28. T. Yamauchi and K. Murakami, "Observation of Deforming and Fracturing Processes of Paper by Use of Thermography", Products of Papermaking, ed. C.F. Baker, Pira International 1993, 825-852.
29. V. Laws, "The Efficiency of Fibrous Reinforcement of Brittle Materials", J. Phys. D4, 1737-1746 (1971).
30. G.A. Cooper and A. Kelly, "Tensile Properties of Fiber Reinforced Metals: Fracture Properties", J. Mech. Phys. Solids 15, 279-297 (1967).
31. D.B. Marshall and B.N. Cox, "Failure Mechanisms in Ceramic Fiber-Matrix Composite", J. Am. Cer. Soc. 68, 225-233 (1985).
32. D.B. Marshall, B.N. Cox, and L.M. Evans, "The Mechanics of Matrix Cracking in Brittle-Matrix Fiber Composites", Acta Met. 33, 2013-22 (1985).
33. Y.S. Li and P.M. Duxbury, "Crack Arrest by Residual Bonding in Resistor and Spring Networks" Phys. Rev. B38, 9257-60 (1988).
34. L-H. Hsueh, "Pull-out of a Ductile Fiber from a Brittle Matrix", J. Mat. Sci. 29, 4790-4793 (1994).
35. J. Morton and G. W. Grooves, "The Effect of Metal Wires on the Fracture of a Brittle-matrix Composite", J. Mat. Sci. 11 617-622 (1976).
36. A.M. Brandt, "On the Optimal Direction of Short Metal Fibers in Brittle Matrix Composites", J. Mat. Sci. 20, 3831-3841 (1985).
37. A.E. Naaman and S.P. Shah, J. Struct. Div. ASCE "Pull-out Mechanisms in Steel Fiber Reinforced Concrete" 102, 1537-1548 (1983).
38. J. Morton and G.W. Grooves, "The Cracking of Composites Consisting of Discrete Ductile Fibers in a Brittle Matrix - Effect of Fibre Orientation", J. Mat. Sci. 9, 1436-1445 (1974).
39. P. Hing and G.W. Grooves, "The Strength and Fracture Toughness of Polycrystalline MgO Containing Metal Particles and Fibres", J. Mat. Sci. 7, 427-434 (1973).
40. K.J. Niskanen, P. Kärenlampi, and M.J. Alava, "Stochastic Analysis of Fracture Toughness", J. Pulp Paper Sci. 22, J392-J397 (1996).
41. K. Friedrich, "Microstructural Efficiency and Fracture Toughness of Short Fiber/Thermoplastic Matrix Composites", Comp. Sci. Tech. 22, 43-74 1985.
42. C.A. Cooper, "The Fracture Toughness of Composites Reinforced with Weakened Fibers", J. Mat. Sci. 5, 645-654 (1970).
43. R.L. Gray, "Analysis of the Effect of Embedded Fibre Length on Fibre Debonding & Pull-out From an Elastic Matrix: Part I, Review of Theories", J. Mat. Sci. 19, 861-870 (1985).
44. P. Shallhorn and A. Karnis, "Tear and Tensile Strength of Mechanical Pulps", International Mechanical Pulping Conference, Toronto, June 11-14, 1979, Transactions of the Technical Section, TR92-99.
45. Y. Yu and P. Kärenlampi, to be published in these proceedings.
46. N. Melanitis, C. Galiotis, and P.L. Tetlow, "Monitoring the Micromechanics of Reinforcement in Carbon Fiber/Epoxy Systems", J. Mat. Sci. 28, 1648-1654 (1992).
47. J.A. Van Den Akker, A.L. Lathorp, M.H. Voelker, and L.R. Dearth, "Importance of Fiber Strength to Sheet Strength", Tappi 41 (8), 416-425 (1958).
48. K. Ebeling, "Distribution of Energy Consumption During the Straining of Paper", "The Fundamental Properties of Paper Related to its Uses", ed. F. Bolam, British Paper and Board Ind. Fed., London (1976).
49. P.W. Manders and M.G. Bader, "The Strength of Hybrid Glass/Carbon Fiber Composites, Part 2A: a Statistical Model", J. Mat. Sci. 16 2246-2256 (1981).