Effect of residual stresses on the interfacial fracture behavior of metal-matrix composites

Composites Science and Technology

Volumn 57, Issue 11, 1997, Pages 1501-1512

  Mukherjee, S ^a,b   Ananth, C R ^a   Chandra, N ^a  

^a FLORIDA STATE UNIVERSITY   (United States)

^b Rosens Motors   (United States)

Author keywords

A. metal matrix composites (MMCs); B. interface; Equivalent domain integral; Push out test; Residual stress; Strain energy release rate

Indexed keywords

CERAMIC MATRIX COMPOSITES; COMPUTER SIMULATION; CRACK INITIATION; CRACK PROPAGATION; FIBER REINFORCED METALS; FINITE ELEMENT METHOD; FRACTURE MECHANICS; INTEGRAL EQUATIONS; INTERFACES (MATERIALS); RESIDUAL STRESSES; STRAIN; STRESS ANALYSIS;

EQUIVALENT DOMAIN INTEGRAL (EDI) METHOD; FIBER PUSH OUT TESTS; STRAIN ENERGY RELEASE RATE;

METALLIC MATRIX COMPOSITES;

COMPOSITES, METAL-MATRIX; FIBRE/MATRIX INTERFACE; TESTING, PUSH-OUT;

EID: 0031277981     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0266-3538(97)00081-X     Document Type: Article

References (34)

1. Nimmer, R. P., Bankert, R. J., Russel, E. S., Smith, G. A. and Wright, P. K., Micromechanical modeling of fiber-matrix interface effects in transversely loaded SIC/TI-6-4 metal matrix composites, J. Compos. Technol. Res., 1991, 13, 3-13.
2. Majumdar, B. S. and Newaz, G. M., Inelastic deformation of metal matrix composites: Plasticity and damage mechanisms. Phil. Mag. A, 1992, 66, 187-212.
3. Brindley, P. K. and Draper, S. L., Failure mechanisms of 0° and 90° SiC/Ti-24A1-11Nb composites under various loading conditions. In Structural Intermetallics, ed. R. Darolia, J. J. Lewandowski, C. T. Liu, P. L. Martin, D. B. Miracle and M. V. Nathal. The Minerals, Metals and Materials Society, 1993, pp. 727-737.
4. Ghosn, L. J., Eldridge, J. I. and Kantzos, P., Analytical modeling of the interfacial stress state during pushout testing of SCS-6/Ti-based composites. Acta Metall. Mater., 1994, 42, 3895-3908.
5. Ananth, C. R. and Chandra, N., Numerical modeling of fiber push-out test in metallic and intermetallic matrix composites - Mechanics of the failure process. J. Compos. Mater., 1995, 29, 1488-1514.
6. Chandra, N. and Ananth, C. R., Analysis of interfacial behavior in MMCs and IMCs using thin-slice push-out tests. Compos. Sci. Technol., 1995, 54, 87-100.
7. Leung, C. K. Y. and Li, V. C., New strength based model for the debonding of discontinuous fibres in an elastic matrix. J. Mater. Sci., 1991, 26, 5996-6010.
8. Kim, J.-K., Zhou, L. and Neu, R. W., Effects of fibre volume fraction on the stress transfer in fibre pull-out tests. Composites, 1994, 25, 470-475.
9. Hsueh, C. H., Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites. Mater. Sci. Eng., 1990, A123, 1-11.
10. Kerans, R. J. and Parthasarathy, T. A., Theoretical analysis of the fiber pullout and pushout tests. J. Am. Ceram. Soc., 1991, 74, 1585-1596.
11. Stang, H. and Shah, S. P., Failure of fiber-reinforced composites by pull-out fracture., J. Mater. Sci., 1986, 21, 953-957.
12. Gao, Y. C., Mai, Y. W. and Cotterell, B., Fracture of fiber-reinforced materials. J. Appl. Math. Phys., 1988, 39, 550-572.
13. Butler, E. P., Fuller, E. R. Jr and Chan, H. M., Interface properties for ceramic composites from a single-fiber pull-out test. Mater. Res. Soc. Symp. Proc., 1990, 170, 17-24.
14. Hutchinson, J. W. and Jensen, H. M., Models of fiber debonding and pull-out in brittle composites with friction. Mech. Mater., 1990, 9, 139-163.
15. Marshall, D. B., Analysis of fiber debonding and sliding experiments in brittle matrix composites. Acta Metall. Mater., 1992, 40, 427-441.
16. Liang, C. and Hutchinson, J. W., Models of the fiber pushout test. Mech. Mater., 1993, 14, 207-221.
17. Ananth, C. R. and Chandra, N., Evaluation of interfacial shear properties of metal matrix composites from fiber push-out tests. Mech. Compos. Mater. Struct., 1995, 2, 309-328.
18. Eldridge, J. I., Fiber push-out testing of intermetallic matrix composites at elevated temperatures. In Intermetallic Matrix Composites II, Vol. 273, ed. D. B. Miracle, D. L. Anton and J. A. Graves. Materials Research Society Symposium Proceedings, 1992, pp. 325-330.
19. Nikishkov, G. P. and Atluri, S. N., An equivalent domain integral method for computing crack tip integral parameters in non-elastic thermomechanical fracture. Eng. Fract. Mech., 1987, 26, 851-867.
20. Nikishkov, G. P. and Atluri, S. N., Calculation of fracture mechanics parameters for an arbitrary three-dimensional crack by the equivalent domain integral method. Int. J. Numer. Meth, Eng., 1987, 24, 1801-1821.
21. Raju, I. S. and Shivakumar, K. N., An equivalent domain integral method in the two-dimensional analysis of mixed mode crack problems. Eng. Fract. Mech., 1990, 37, 707-725.
22. Nishioka, T. and Atluri, S. N., On the computation of mixed-mode K-factors for a dynamically propagating crack using path-independent integrals. Eng. Fract. Mech., 1984, 20, 193-208.
23. Ishikawa, H., A finite element analysis of stress intensity factors for combined tensile and shear loading by only a virtual crack extension. Int. J. Fract., 1980, 16, R243-R246.
24. MARC Analysis Corporation, MARC version: K6, User Manuals, 1996.
25. Deng, X., An asymptotic analysis of stationary and moving cracks with factional contact along bimaterial interfaces and in homogeneous solids. Int. J. Solids Struct., 1994, 31, 2407-2429.
26. Deng, X., Mechanics of debonding and delamination in composites: Asymptotic studies. Compos. Eng., 1995, 5, 1299-1315.
27. Deng, X., Private communication, 1996.
28. Roman, I. and Jero, P. D., Interfacial shear behavior of two titanium-based SCS-6 model composites. In Intermetallic Matrix Composites II, Vol. 273, ed. D. B. Miracle, D. L. Anton and J. A. Graves. Materials Research Society Symposium Proceedings, 1992, pp. 337-342.
29. Arnold, S. M., Arya, V. K. and Melis, M. E., Elastic/plastic analyses of advanced composites investigating the use of the compliant layer concept in reducing residual stresses resulting from processing. NASA TM 103204, 1990.
30. Majumdar, B. S. and Newaz, G. M., Isothermal fatigue mechanisms in Ti-based metal metal matrix composites. NASA CR 191181, 1993.
31. Grande, D. H., Mandell, J. F. and Hong, K. C. C., Fiber-matrix bond strength studies of glass, ceramic, and metal matrix composites. J. Mater. Sci., 1988, 23, 311-328.
32. Kroupa, J. L. and Neu, R. W., The nonisothermal viscoplastic behavior of a titanium-matrix composite. Compos. Eng., 1994, 4, 965-977.
33. Dundurs, J., Discussion. J. Appl. Mech., 1969, 36, 650-652.
34. Majumdar, B. S. and Miracle, D. B., Interface measurements and applications in fiber reinforced MMCs. J. Key Eng. Mater., 1996, 116-117, 153-172.