Bending behavior of delaminated composite plates with contact effects

Composite Structures

Volumn 39, Issue 3-4, 1997, Pages 347-356

  Yeh, Meng Kao ^a   Fang, Lian Bin ^a   Kao, Ming Huei ^a  

^a NATIONAL TSING HUA UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING (DEFORMATION); BUCKLING; DELAMINATION; FINITE ELEMENT METHOD; LAGRANGE MULTIPLIERS; LAMINATED COMPOSITES; MATHEMATICAL MODELS; NONLINEAR EQUATIONS; PLATES (STRUCTURAL COMPONENTS); STRUCTURAL ANALYSIS; TENSILE TESTING;

LAMINATED PLATES; NEWTON-RAPHSON METHOD; STRIP TYPE DELAMINATION;

COMPOSITE STRUCTURES;

EID: 0031277363     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0263-8223(97)00127-X     Document Type: Article

References (38)

1. Rybicki, E. F., Schmueser, D. W. and Fox, J., An energy release rate approach for stable crack growth in the free-edge delamination problem. Journal of Composite Materials 1977, 11, 470-487.
2. Wang, S. S., Fracture mechanics for delamination problems in composite materials. Journal of Composite Materials 1983, 17, 210-223.
3. Wang, S. S., Edge delamination in angle-ply composite laminates. AIAA Journal 1984, 22, 256-264.
4. Kim, K. S. and Hong, C. S., Delamination growth in angle-ply laminated composites. Journal of Composite Materials 1986, 20, 423-439.
5. Chan, W. S. and Wang, A. S. D., Effects of a 90° ply on matrix cracks and edge delamination in composite laminates. Composites Science and Technolog 1990, 38, 143-157.
6. Renard, J. and Roudolff, F., Analytical and numerical calculation of strain energy release rate during delamination growth in a carbon epoxy laminate. Composites Science and Technology 1991, 42, 305-316.
7. Davision, B. D., Energy release rate determination for edge delamination under combined in-plane, bending and hygrothermal loading. Part I - Delamination at a single interface. Journal of Composite Materials 1994, 28, (11), 1009-1031.
8. Davision, B. D., Energy release rate determination for edge delamination under combined in-plane, bending and hygrothermal loading. Part II - Two symmetrically located delaminations. Journal of Composite Materials 1994, 28, (14), 1371-1392.
9. Whitcomb, J. D., Finite element analysis of instability related delamination growth. Journal of Composite Materials 1981, 15, 403-426.
10. Chai, H., Babcock, C. D. and Knauss, W. G., One dimensional modeling of failure in laminated plates by delamination buckling. International Journal of Solids and Structures 1983, 17, 1069-1083.
11. Sallaw, S. and Simitses, G. J., Delamination buckling and growth of flat cross-ply laminates. Composite Structures 1985, 4, 361-381.
12. Whitcomb, J. D., Parametric analytical study of instability-related delamination growth. Composites Science and Technology 1986, 25, 19-48.
13. Donaldson, S. L., The effect of interlaminar fracture properties on the delamination buckling of composite laminates. Composites Science and Technology 1987, 28, 33-44.
14. Yin, W. L., The effects of laminated structure on delamination buckling and growth. Journal of Composite Materials 1988, 22, 502-517.
15. Shaw, D. and Tsai, M. Y., Analysis of delamination in compressively loaded laminates. Composites Science and Technology 1989, 34, 1-17.
16. Kardomateas, G. A., Postbuckling characteristics in delaminated kevlar/epoxy laminates: An experimental study. Journal of Composites Technology and Research 1990, 12, 85-90.
17. Madenci, E., Delamination growth and buckling in a orthotropic strip. International Journal of Solids and Structures 1991, 27, 1773-1788.
18. Shu, D. and Mai, Y. W., Buckling of delaminated composites re-examined. Composites Science and Technology 1993, 47, 35-41.
19. Bottega, W. L. and Maewal, A., Delamination buckling and growth in laminates. ASME Journal of Applied Mechanics 1983, 50, 184-189.
20. Yin, W. L., Axisymmetric buckling and growth of a circular delamination in compressed laminates. International Journal of Solids and Structures 1985, 21, 503-514.
21. Chai, H. and Babcock, C. D., Two-dimensional modeling of compressive failure in delaminated laminates. Journal of Composite Materials 1985, 19, 67-98.
22. Shivakumar, K. N. and Whitcomb, J. D., Buckling of a sublaminate in a quasi-isotropic composite laminate. Journal of Composite Materials 1985, 19, 2-18.
23. Chatterjee, S. N., Dick, W. A. and Pipes, R. B., Mixed-mode delamination fracture in laminated composites. Composites Science and Technology 1986, 25, 49-67.
24. Kassapoglou, C., Buckling, post-buckling and failure of elliptical delaminations in laminates under compression. Composite Structures 1988, 9, 139-159.
25. Davidson, B. D., Delamination buckling: Theory and experiment. Journal of Composite Materials 1991, 25, 1351-1378.
26. Yeh, M. K. and Tan, C. M., Buckling of elliptically delaminated composite plates. Journal of Composite Materials 1994, 28, (1), 36-52.
27. Whitcomb, J. D. and Shivakumar, K. N., Strain-energy release rate analysis of plate with postbuckled delaminations. Journal of Composite Materials 1989, 23, 714-734.
28. Yeh, M. K. and Lee, H. C., Buckling of composite plates with rectangular delamination. In Proceedings of the Tenth International Conference on Composite Materials, Vol. V, Structures, ICCM-10, August 14-18, Whistler, near Vancouver, British Columbia, Canada, Woodland Publishing, Cambridge, UK, 1995, pp. 69-76.
29. Kardomateas, G. A., Snap buckling of delaminated composites under pure bending. Composites Science and Technology 1990, 39, 63-74.
30. Lu, T. J., Xia, Z. C. and Hutchinson, J. W., Delamination of beams under transverse shear and bending. Materials Science and Engineering 1994, A188, 103-112.
31. Kao, M. H. and Yeh, M. K., Delaminated plates under pure bending and local buckling. In Proceedings of the 18th National Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, ROC, Vol. 3, 1994, pp. 89-96 (in Chinese).
32. Whitcomb, J. D., Analysis of a laminate with a post-buckled embedded delamination, including contact effects. Journal of Composite Materials 1992, 26, (10), 1523-1535.
33. Mukherjee, Y. X., Gulrajani, S. N., Mukherjee, S. and Netravali, A. N., A numerical and experimental study of delaminated layered composites. Journal of Composite Materials 1994, 28, (11), 1009-1392.
34. Suemasu, H., Postbuckling behaviors of composite planels with multiple delaminations. Journal of Composite Materials 1993, 27, (11), 1077-1096.
35. Kutlu, Z. and Chang, F. K., Modeling compression failure of laminated composites containing multiple through-the-width delaminations. Journal of Composite Materials 1992, 26, (3), 350-387.
36. Bathe, K. J., Finite Element Procedures in Engineering Analysis. Prentice-Hall, New Jersey, 1982.
37. Chen, W. H. and Yeh, J. T., Finite element analysis of finite deformation contact problems with friction. Computers and Structures 1988, 29, (3), 423-436.
38. Christensen, R. M., Mechanics of Composite Materials. Wiley, New York, 1979.