Ergonomics and safety in societies in transfer

Ergonomics

Volumn 40, Issue 10, 1997, Pages 1130-1147

  Koradecka, Danuta ^a  

^a Ctrl Inst for Labour Protection   (Poland)

Author keywords

Ergonomics; Occupational safety; Quality assurance; Safety management; Working conditions

Indexed keywords

INTERNATIONAL LAW; MANAGEMENT; OCCUPATIONAL RISKS; QUALITY ASSURANCE; SOCIETIES AND INSTITUTIONS; STANDARDS;

CENTRAL EUROPE; WORKING CONDITIONS;

ERGONOMICS;

CONFERENCE PAPER; EASTERN EUROPE; ERGONOMICS; LAW; METHODOLOGY; OCCUPATIONAL HEALTH; OCCUPATIONAL SAFETY; QUALITY CONTROL; SOCIETY; WORK ENVIRONMENT;

ACCIDENTS, OCCUPATIONAL; ADULT; EUROPE; FEMALE; GUIDELINES; HUMAN ENGINEERING; HUMANS; INTERNATIONAL COOPERATION; MALE; OCCUPATIONAL DISEASES; PROTECTIVE DEVICES; SAFETY;

EID: 0031259734     PISSN: 00140139     EISSN: None     Source Type: Journal    
DOI: 10.1080/001401397187658     Document Type: Conference Paper

References (55)

1. BAŃKA, J. 1970, Birth of the Philosophy of the Labour Science (Ksia̧zka i Wiedza, Warsaw, Poland) (in Polish).
2. BATOGOWSKA, A. and SŁOWIKOWSKI, J. 1994. Atlas Antropometryczny Dorosłej Populacji Polski Dla Potrzeb Projektowania [An anthropometric atlas of the adult population of Poland for design purposes], 2nd edn (Prace i materiały Instytutu Wzornictwa Przemysłowego, No. 149, Warsaw, Poland).
3. BIERNACKI, A., GARBACKI, R., PIETRUSIŃSKI, P., PYSZKIEWICZ, J., RADZKI, J. and WIATR, R. 1996, The computer system of storing and processing of the data concerning the ergonomics and labour protection, Ergonomia, 19, 177-182 (in Polish).
4. BUGAJSKA, J. 1990, Zagrożenia i ucia̧żliwości pracy na stanowiskach z komputerami [Hazards and arduousness of work at computer stands], in Ergonomia na stanowiskach pracy z mikrokomputerami (CIOP, Warsaw, Poland), 12-24.
5. BUGAJSKA, J., KONARSKA, M., WOLSKA, A., WIDERSZAL-BAZYL, M., ROMAN, D. and SWITULA, M. 1996, Wpływ optymalizacji stanowisk operatora VDT na profilaktykȩ schorzeń układu miȩśniowo-szkieletowego [The optimization of VDT operators' stands on the prevention of musculoskeletal disorders], Zastosowanie ergonomii 1, 57-63.
6. ĆWIRKO, H. 1986, Ergonomic analysis of the moulder work stand in foundry of Z. M. Ursus, in Ergonomics in Practical Examination I Warsaw, Poland) (in Polish).
7. ENGEL, Z., MAKAREWICZ, G. and ZAWIESKA, W. 1995, Metody aktywnej redukcji hałasu [Active methods of noise reduction], Wibroakustyka Maszyn i Srodowiska, 27, 373-394.
8. FRANUS, E. A. 1991, Connective Networks In Ergonomics. General Methodological Considerations (Elsevier, Amsterdam).
9. FREJTAK, S. (ed.) 1991, Zastosowanie Ergonomii. Numer Specjalny: Materiały XIX Krajowej Konferencji Ergonomicznej: System ochrony paracujacego człowieka [Application of ergonomics. Special issue: Proceedings of the XIX National Ergonomics Conference. A system of the protection of the working person], Karpacz, Poland.
10. GEDLICZKA, A. 1989, Design of a computer stand based on the model study of the operational efficiency, Ergonomia, 12, 255-262 (in Polish).
11. GIERASIMIUK, J. (ed.) 1984, Bezpieczeńswo Pracy i Ergonomia [Occupational safety and ergonomics] (CIOP, Warsaw, Poland).
12. GIERASIMIUK, J., MYRCHA, K. and WRÓBEL, J. 1992, Projektowanie wspomagane komputerowo a kształtowanie bezpieczeństwa maszyn i urza̧dzeń [CAD and shaping machine and equipment safety], Bezpieczenstwo Pracy, 7/8, 14-18; 9, 17-20.
13. GIERASIMIUK, J., MYRCHA, K. and WRÓBEL, J. 1992, Projektowanie wspomagane komputerowo a kształtowanie bezpieczeństwa maszyn i urza̧dzeń [CAD and shaping machine and equipment safety], Bezpieczenstwo Pracy, 7/8, 14-18; 9, 17-20.
14. GROBELNY, J. 1990a, Graphics anthropometric data base in the AutoCAD aided design system, Ergonomia, 13, 19-30 (in Polish).
15. GROBELNY, J. 1990b, Anthropometric data for designing a driver's workstand in the AutoCAD system, Ergonomia, 13, 149-161 (in Polish).
16. GRZESIK, J. 1989, Strenuousness and harmfulness to health connected with the work of computer operators, Ergonomia, 12, 203-212 (in Polish).
17. GRZESIK, J., HARIZIN, B., PAWLAS, K. and WITULA, R. 1990, The effects of noise on vision efficiency, Polish Journal of Occupational Medicine 3, 163-170.
18. JASTRZȨBOWSKI, W. 1857, Rys ergonomii, czyl, nauki o pracy, opartej na prawdach poczerpniȩtych z Nauki Przyrody [An outline of ergonomics, or the science of work, based on the truths drawn from Natural Science], Przyroda i Przemysł 2(29), 227-231; 2(30), 236-238; 2(31), 244-247; 2(32), 253-255.
19. JASTRZȨBOWSKI, W. 1857, Rys ergonomii, czyl, nauki o pracy, opartej na prawdach poczerpniȩtych z Nauki Przyrody [An outline of ergonomics, or the science of work, based on the truths drawn from Natural Science], Przyroda i Przemysł 2(29), 227-231; 2(30), 236-238; 2(31), 244-247; 2(32), 253-255.
20. JASTRZȨBOWSKI, W. 1857, Rys ergonomii, czyl, nauki o pracy, opartej na prawdach poczerpniȩtych z Nauki Przyrody [An outline of ergonomics, or the science of work, based on the truths drawn from Natural Science], Przyroda i Przemysł 2(29), 227-231; 2(30), 236-238; 2(31), 244-247; 2(32), 253-255.
21. JASTRZȨBOWSKI, W. 1857, Rys ergonomii, czyl, nauki o pracy, opartej na prawdach poczerpniȩtych z Nauki Przyrody [An outline of ergonomics, or the science of work, based on the truths drawn from Natural Science], Przyroda i Przemysł 2(29), 227-231; 2(30), 236-238; 2(31), 244-247; 2(32), 253-255.
22. KAMIEŃSKAŻYŁA, M. 1993, Work discomforts of VDT operators, in W. Marras, W. Karwowski, J. Smith and L. Pacholski (eds), The Ergonomics of Manual Work -Supplement (Taylor & Francis, London).
23. KONARSKA, M. and KORADECKA, D. 1993, New strategies in improvement of the working conditions, in B. S. Levy and Ch. Levenstein (eds), Policies, Programs, and Public Participation: Environmental and Occupational Health in the Emerging Market Economies and Democracies of Central and Eastern Europe, Edited Proceedings of the Third Annual Symposium on Environmental and Occupational Health During Societal Transition in Central and Eastern Europe, Pułtusk, Poland, 26 June-1 July, 1992 (Management Sciences for Health, Boston, MA), 21-24.
24. KORADECKA, D. 1981, Changes in threshold values of finger vibration sensibility depending on differences in measurement conditions, Acta Physiologica Polonica, 32, 83-92.
25. KORADECKA, D. 1982, Periphere Kreislaufreaktionen durch Arbeiten mit vibrierenden Werkzeugen, Schriftenreihe Arbeitsschutz, 32.
26. KORADECKA, D. 1990, Health, work and the economy in Poland, in B. S. Levy and Ch. Levenstein (eds), Proceedings of the Symposium on Occupational and Environmental Health During Societal Transition in Eastern Europe, Pecs, Hungary, 22-27 September (Management Sciences for Health, Boston, MA).
27. KORADECKA, D. (ed.) 1997, Bezpieczeństwo Pracy i Ergonomia [Occupational safety and ergonomics] (CIOP, Warsaw, Poland) (in press).
28. KORADECKA, D. and SKOWRON, J. 1996, Qualitative and quantitative assessment of health and safety conditions in the enterprise, Strengthening of occupational health in the Baltic Sea countries. Proceedings of a follow-up meeting (WHO ECEH), 17-18 October, Riga, Latvia (in press).
29. KORADECKA, D., KRZYŚKÓW, B. and RZEPECKI, J. 1996a, Economic incentives for the improvement of the working environment (the Polish experience), Proceedings of the Third European Conference on Monitoring the Working Environment, 10-11 October, Dublin, Ireland.
30. KORADECKA, D., PAWŁOWSKA, Z. AND PODGÓRSKI, D. 1996b, Kierunki rozwia̧zań systemów zarza̧dzania bezpieczeństwem i higiena̧ pracy w uregulowaniach miȩdzynarodowych [Directions in the systems of occupational safety and hygiene management in international regulations], Materiały Konferencji Naukowo-Technicznej: Zarza̧dzanie bezpieczeństwem pracy w państwie i przedsiébiorstwie, 23-25 October, Ustroń, Poland (Glówny Instytut Górnictwa, Katowice, Poland) 9-25.
31. KOSIŃSKI, R. 1995, Simple quantitative analysis of spatio-temporal diagrams for domain wall dynamics, Acta Physical Polonica, A87, 575-582.
32. ŁAPACZEWSKA, K. 1986, Pole Widzenia, Badania Modelowe [Field of vision. Model study] (Prace i materiały Instytutu Wzornictwa Przemysłowego, No. 102, Warsaw, Poland).
33. MAKAREWICZ, G. and ZAWIESKA, W. 1994, Model ochronnika słuchu z aktywnym tłumieniem [The prototype of hearing protection with active noise attenuation]. Akustyka w Technice, Medycynie i Kulturze, 153-157.
34. MAREK, T. and NOWOROL, C. 1987, Cumulative fatigue symptoms of dialogue and data entry VDU operators, in G. Salvendy, S. L. Sauter and J. J. Hurrell (eds), Social, Ergonomics and Stress Aspects of Work with Computers (Elsevier, Amsterdam), 255-262.
35. MAREK, T., KARWOWSKI, W. and NOWOROL, C. 1989, Dissatisfaction with VDT work and ocular subjective discomfort of the VDT operators, in M. J. Smith and G. Salvendy (eds), Work with Computers (Elsevier, Amsterdam), 369-375.
36. MARSZAŁEK, A. 1997, Age and heat tolerance, Ergonomia (in Polish) (in press).
37. MINISTERSTWO PRACY I POLITYKI SOCJALNEJ 1996, Ocena Stanu Bezpieczeństwa i Higieny Pracy w 1995 Roku [Assessment of the state of occupational safety and hygiene in 1995] (Ministerstwo Pracy i Polityki Socjalnej, Warsaw, Poland).
38. NOWAK, E. 1989, Workspace for disabled people, Ergonomics, 9, 1077-1088.
39. NOWAK, E. 1992, Practical application of anthropometric research in rehabilitation, International Journal of Industrial Ergonomics, 9, 109-115.
40. OGIŃSKI, A. and KRASUCKI, P. 1972, Ergonomics in the Practice of an Industrial Physician (PZWL, Warsaw, Poland) (in Polish).
41. OKUŃ, J. and PALUSZKIEWICZ, L. 1963, Psychologia inżynieryjna [Engineering psychology] (PWN, Warsaw, Poland).
42. PACHOLSKI, L. and MARCINKOWSKI, J. S. (eds) 1993, Quo Vadis Polska Ergonomio? [Quo vadis Polish ergonomics?] (Politechnika Poznańska, Poznań, Ploand).
43. PALUCH, R 1989, Musculoskeletal complaints in VDT operators, Ergonomia, 12, 213-225 (in Polish).
44. PALUSZKIEWICZ, L. 1975, Ergonomiczne właściwości przyrza̧dów sygnalizacyjnych i sterowniczych [Ergonomic properties of signalling and controlling devices] (Instytut Wydawniczy CRZZ, Warsaw, Poland).
45. PODGÓRSKI, D. 1996, Testing and certification of machinery and personal protective equipment in Poland, in Proceedings of the 3rd Eurolab Symposium Testing and Analysis for Industrial Competitiveness and Sustainable Development, 5-7 June, Berlin, vol. 1, 120-128.
46. RATAJCZAK, Z. 1988, L'infaillibilité de l'homme dans les situation du risque, in Proceedings of XXIV Congress of Société D'Ergonomie de Langue Français: Models et pratiques de l'analyse du travail, Paris (Univesité Paris Nord, Paris).
47. ROMAN, D., BUGAJSKA, J. and KONARSKA, M. 1996, Characteristics of muscular load in computer data entry workers assessed by EMG and postural angels, International Journal of Occupational Safety and Ergonomics, 2, 128-137.
48. ROMAN-LIU, D., WITTEK, A. and KEDZIOR, K. 1996, Muscular load assessment of the upper limb positions subjectively chosen as the most convenient, International Journal of Occupational Safety and Ergonomics, 2, 273-283.
49. SŁOWIKOWSKI, J. 1991, Design of the underwater, power operated hand tools, in Y. Quéinnec and F. Daniellou (eds), Designing for Everyone. Proceedings of the 11th Congress of the International Ergonomics Association, Paris, vol. 2 (Taylor & Francis, London), 972-974.
50. TERELAK, J. and KOWALSKI, W. 1991, Moderate thermal strain - physiological cost and mental and psychomotorical performance, Ergonomia, 14, 181-192 (in Polish).
51. WELON, Z. 1979, Method for determination and estimation of operato's body posture at work, Ergonomia 2, 41-61 (in Polish).
52. WIDERSZAL-BAZYL, M. 1996, Psychospołeczne cechy pracy a zdrowie: próba weryfikacji modelu R. Karaska [Psychosocial features of work and health: an attempt to verify R. Karasek's model], in XXIX Zjazd Naukowy Polskiego Towarzystwa Naukowego (Gdańskie Wydawnictwo Psychologiczne, Gdańsk, Poland), 259.
53. WIDERSZAL-BAZYL, M and ŻOŁNIERCZYK, D. 1995, Dimensions of job control in computerized and traditional office work and its health affects, International Journal of Occupational Safety and Ergonomics, 1, 29-41.
54. WOLSKA, A. 1997, Wplyw rozkładu luminancji w polu pracy wzrokowej operatorów monitorów ekranowych na ich zmȩczenie wzroku [Environmental luminance and VDT operators' visual fatigue]. Doctoral thesis (CIOP, Warsaw, Poland).
55. ZBICHORSKI, Z. and PAWLIKOWSKA, H. 1962, Methodology of work stands normalization, in Prace Instytutu Ekonomiki i Organizacji Przemysłu Maszynowego, No. 48 (Instytutu Ekonomiki i Organizacji Przemysłu Maszynowego, Warsaw, Poland) (in Polish).