The role of rate effects and of thermomechanicai coupling in shear localization

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 119, Issue 4, 1997, Pages 322-331

  Estrin, Y ^a   Molinari, A ^b   Mercier, S ^b  

^a UNIVERSITY OF WESTERN AUSTRALIA   (Australia)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; ENERGY ABSORPTION; MECHANICAL WAVES; SENSITIVITY ANALYSIS; SHEAR STRESS; STRAIN HARDENING; STRAIN RATE; THERMOMECHANICAL TREATMENT;

DENSITY DISLOCATION; MECHANICAL ENERGY ABSORPTION; SHEAR BONDING; SHEAR LOCALIZATION; STRAIN RATE SENSITIVITY; THERMOMECHANICAL COUPLING;

PLASTIC FLOW;

EID: 0031250366     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2812265     Document Type: Article

References (38)

1. Bai, Y., 1982, “Thermo-Plastic Instability in Simple Shear,” Journal of Mechanics and Physics of Solids, Vol. 30, pp. 195-207.
2. Bai, Y., and Dodd, B., 1992, Adiabatic Shear Localization, Pergamon Press, Oxford.
3. Bodner, S. R., and Partom, Y., 1975, “Constitutive Equations for Elastic-Vis-coplastic Strain-Hardening Materials,” ASME Journal of Applied Mechanics, Vol. 42, pp. 385-389.
4. Bodner, S. R., and Rubin, M. B. 1994, “Modelling of Hardening at Very High Strain Rates,” J. Appl Phys., Vol, 76, pp. 2742-2747.
5. Carter, C. B., and Ray, I. J. F., 1977, “On the Stacking Fault Energy in Copper Alloys,” Philosophical Magazine, Vol. 35, pp. 189-200.
6. Clifton, R. J., 1978, “Adiabatic Shear,” Report to the NRC Committee on Material Response to Ultra-High Loading Rates, pp. 1-18.
7. Dinzart, F., Fressengeas, C., and Molinari, A., 1994, “Localisation de la Déformation Plastique en Cisaillement Simple: Effets Locaux de Géométrie et d’inhomogénéité Matérielle,” Comptes Rendus de l’Académie des Sciences, Paris, Série II, Vol. 319, pp. 381-386.
8. Duffy, J., 1982, “The Dynamic Plastic Deformation of Metals: A Review,” AFWAL-TR-82-4024 Report, Materials Laboratory, Air Force Wright Aeronautical Laboratories, Ohio.
9. Duffy, J., 1991, “Experimental Studies of Shear Band Formation through Temperature Measurements and High Speed Photography,” Journal de Physique IV Coll C3, pp. 646-652.
10. Estrin Y., and Mecking, H., 1984, “A Unified Phenomenological Description of Work Hardening and Creep Based on One-Parameter Models,” Acta Metallur-gica, Vol. 32, pp. 57-70.
11. Estrin, Y., and H Mecking, 1985, “Plastic Instability and Rupture Life in Tension Creep,” Strength of Metals and Alloys, McQueen, H. J., Bailon, J.-P., Dickson, J. I., Jonas, J. J., and Akben, M. G., eds., Pergamon Press, Oxford, Vol. 1, pp. 589-594.
12. Estrin, Y., 1991, “A Versatile Unified Constitutive Model Based on Dislocation Density Evolution,” High Temperature Constitutive Modeling-Theory and Application, Freed, A. D. and Walker, K. P., eds., MD-Vol. 26/AMD Vol. 121, ASME, pp. 65-83.
13. Estrin, Y. 1996, “Dislocation Density-Related Constitutive Modelling,” Unified Constitutive Laws of Plastic Deformation, A. S. Krausz and K. Krausz, eds., Academic Press, pp. 69-106.
14. Follansbee, P. S., and Kocks, U. F., 1988, “A Constitutive Description of the Deformation of Copper Based on the Use of Mechanical Threshold Stress as an Internal State Variable,” Acta Metallurgica, Vol. 36, pp. 81-93.
15. Fressengeas, C., and Molinari, A., 1987, “Instability and Localization of Plastic Flow in Shear at High Strain Rates,” Journal of Mechanics and Physics of Solids, Vol. 35, pp. 185-211.
16. Gray, G. T., Chen, S. R., Wright, W., and Lopez, M. F., “Constitutive Equations for Annealed Metals Under Compression at High Strain Rates and High Temperatures,” LA-122669-MS Report, Los Alamos National Laboratory, Los Alamos, New Mexico.
17. Johnson, G. R., 1981, “Dynamic Analysis of a Torsion Test Specimen Including Heat Conduction and Plastic Flow,” ASME Journal of Engineering Materials and Technology, Vol. 103, pp. 201-206.
18. Klepaczko, J., 1975, “Thermally Activated Flow and Strain rate History Effects for Some Polycrystalline f.c.c. Metals,” Materials Science and Engineering, Vol. 18, pp. 121-135.
19. Klepaczko, J. R., and Chiem, C. Y., 1986, “On Rate Sensitivity of f.c.c. Metals, Instantaneous Rate Sensitivity and Rate Sensitivity of Strain Hardening,” Journal of Mechanics and Physics of Solids, Vol. 34, pp. 29-54.
20. Klepaczko, J. R., Sasaki, T., and Kurokawa, T., 1993, “On Rate Sensitivity of Polycrystalline Aluminium at High Strain Rates,” Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 36, pp. 170-187.
21. Kobayashi, H., 1987, “Shear Localization and Fracture in Torsion of Metals,” PhD thesis, Univ. of Reading.
22. Kocks, U. F., 1976, “Laws for Work-Hardening and Low-Temperature Creep,” ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 7685.
23. Kocks, U. F., Argon, A. S., and Ashby, M. F., 1975, Thermodynamics and Kinetics of Slip, Pergamon Press, Oxford.
24. Kocks, U. F., and Mecking, H., 1976, “Strain Hardening and Strain Softening,” Symposium on Advances in Metal Deformation: Phenomena and Mechanisms, Cornell University, Oct.
25. Litonski, J., 1976, “Plastic Flow of a Tube under Adiabatic Torsion,” Bulletin de l’Académie Polonaise des Sciences, Série des Sciences Techniques, Vol. 25, pp. 1-8.
26. Marchand, A., and Duffy, J., 1988, “An Experimental Study of the Formation process of Adiabatic Shear Bands in a Structural Steel,” Journal of Mechanics and Physics of Solids, Vol. 36, pp. 251-267.
27. Mecking, H., Nicklas, B., Zarubova, N., and Kocks, U. F., 1986, “A ‘Universal’ Temperature Scale for Plastic Flow,” Acta Metallurgica, Vol. 34, pp. 527-535.
28. Merzer, A. M., 1982, “Modelling of Adiabatic Shear Band Development from Small Imperfections,” Journal of Mechanics and Physics of Solids, Vol. 30, pp. 323-338.
29. Molinari, A., 1985, “Instabilité thermoviscoplastique en cisaillement simple,” Journal de Mécanique Théorique et Appliquée, Vol. 4, pp. 659-684.
30. Molinari, A., 1988, “Shear Band Analysis,” Solid State Phenomena, Vols. 3 and 4, pp. 447-468.
31. Molinari, A., and Clifton, R. J., 1983, “Localisation de la Déformation Vis-coplastique en Cisaillement Simple: Résultats Exacts en Théorie Non Linéaire,” Comptes Rendus de l'Académie des Sciences, Paris, Série II, Vol. 296, pp. 1-4.
32. Molinari, A., and Clifton, R. J., 1987, “Analytical Characterization of Shear Localization in Thermoviscoplastic Materials,” ASME Journal of Applied Mechanics, Vol. 54, pp. 806-812.
33. Molinari, A., Estrin, Y., and Dudzinski, D., 1993, “Thermomechanical Instability Associated with Heat Release during Plastic Flow,” International Journal of Plasticity, Vol. 9, pp. 317-343.
34. Rogers, H. C., 1979, “Adiabatic Plastic Deformation,” Annals and Reviews of Materials Science, Vol. 9, pp. 283-311.
35. Shawki, T. G., 1986, “Analysis of Shear Band Formation at High Strain Rates and Viscoplastic Response of Polycrystals,” PhD thesis, Brown University, Providence, R.I.
36. Tong, W., Clifton, R. J., and Huang, S. 1992, “Pressure-Shear Impact Investigation of Strain Rate History Effects in Oxygen-Free High-Conductivity Copper,” Journal of Mechanics and Physics of Solids, Vol. 40, pp. 1251-1294.
37. Wright, T. W., and Batra, R, C., 1985, “Initiation and Growth of Adiabatic Shear Bands,” international Journal of Plasticity, Vol. 1, pp. 205-212.
38. Wright, T. W., 1990, “Approximate Analysis for the Formation of Adiabatic Shear Bands,” Journal of Mechanics and Physics of Solids, Vol. 38, pp, 515-526.