Critical mode control of a wind-loaded tall building using an active tuned mass damper

Engineering Structures

Volumn 19, Issue 10, 1997, Pages 834-842

  Mackriell, L E ^a   Kwok, K C S ^c   Samali, B ^b  

^a Acer Wargon Chapman   (Australia)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

^c NONE

Author keywords

Active control; Active tuned mass damper; Structural control; Tall buildings; Wind loading

Indexed keywords

ALGORITHMS; DAMPING; DYNAMIC RESPONSE; FEEDBACK; STRUCTURAL ANALYSIS; STRUCTURAL LOADS; VIBRATIONS (MECHANICAL); WIND STRESS;

ACTIVE TUNED MASS DAMPERS; CRITICAL MODE CONTROL; STRUCTURAL CONTROL;

TALL BUILDINGS;

EID: 0031248548     PISSN: 01410296     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0141-0296(97)00172-7     Document Type: Article

References (27)

1. Yang, J. N., Akbarpour, A. and Ghaemmaghami, P. 'New optimal control algorithms for structural control', J. Engng. Mech., ASCE 1987 113(9), 1369-1386
2. Yang, J. N., Li, Z. and Liu, S. C. 'Instantaneous optimal control with velocity and acceleration feedbacks', J. Probabilistic Engng Mech. 1991 16(3), 204-211
3. Yang, J. N., Li, Z. and Liu, S. C. 'Stable controllers for instantaneous optimal control', J. Engng Mech., ASCE 1992, 118(8), 1612-1630
4. Nishimura, I., Kobori, T., Sakamoto, M., Koshika, N., Sasaki, K. and Orui, S. 'Acceleration feedback method applied to active tuned mass dampers', Proc. 1st MOVIC Conf., Yokohama, Japan 1992, pp 273-278
5. Chang, J. C. and Soong, T. T. 'Structural control using active tuned mass dampers', J. Engng Mech., ASCE 1980, 106(6), 1091-1099
6. Soong, T. T., Reinhorn, A. M., Wang, Y. P. and Lin, R. C. 'Full scale implementation of active control I: design and simulation', J. Struct. Div., ASCE 1991, 118(12), 3516-3535
7. Watanabe, T. and Yoshida, K. 'Evaluation and optimisation of parallel hybrid active dynamic vibration absorbers', JSME Int. Series, 1994, 37(3), 471-476
8. Yamazaki, S., Tamari, M. and Abiru, H. 'Full scale investigation of performance of tuned active dampers installed in Landmark Tower', Yokohama, Proc. 91CWE 1995, New Delhi, India pp 1631-1642
9. Takenaka, Y., Kobori, T., Ishii, K., Yamada, T., Arita, T., Tanida, K., Koike, Y., Mutaguchi, M., Murata, T. and Mauroka, M. 'Development and application of V-shaped hybrid mass damper for high rise buildings', Proc. 2nd Int. MOVIC Conf., Yokohama, Japan, 1994, pp 563-568
10. Ohrui, S., Kobori, T., Sakamoo, M., Koshika, N., Nishimura, I., Sasaki, K., Kondo, A. and Fukushima, I. 'An active-passive composite tuned mass damper for vibration control of a building'. Proc 2nd MOVIC Conf., Yokohama, Japan, 1994, pp 569-574
11. Koshika, N., Sakamoto, M., Sasaki, K., Ikeda, Y. and Kobori, T. 'Control effect of active mass driver system during earthquakes and winds', Proc 1st MOVIC Conf., Yokohama, Japan, 1992, pp 261-266
12. Pantelides, C. 'Active control of wind excited structures', J. Wind Engng Ind. Aerodyn. 1990, 36, 189-202
13. Samali, B., Yang, J. N. and Yeh, C. T. 'Control of lateral-torsional motion of wind-excited buildings' J. Engng Mech., ASCE 1985, 111(6), 777-796
14. Syhardjo, J., Spencer, B. F. and Kareem, A. 'Frequency domain optimal control of wind-excited buildings', J. Engng Mech., ASCE 1992, 118(12), 2463-2481
15. Facioni, R. J., Kwok, K. C. S. and Samali, B. 'A wind tunnel investigation of the control of wind induced tall buildings by an active tuned mass damper', University of Sydney Research Report R700, 1994
16. Miller, R. K., Masri, S. F., Dehghanyar, T. J. and Caughey, T. K. 'Active vibration control of large civil structures', J. Engng Mech., ASCE 1988, 114(9), 1542-1569
17. Abdel-Rohman, M. and Al-Zanaidi, M. 'Design of appendages for tall building control', J. Struct. Engng, ASCE 1987, 113(2), 397-407
18. Reinhorn, A. M., Soong, T. T., Riley, M. A., Lin, R. C., Aizawa, S. and Higashino, M. 'Full scale implementation of active control. II: installation and performance', J. Struct. Div., ASCE 1993, 119(6), 1935-1960
19. Kobori, T., Koshika, N., Yamada, L. and Ikeda, Y. 'Seismic response-controlled structure with active mass driver system, part 1: design and part 2: verification', J. Earthquake Engng Struct. Dyn., 1991, 20, 133-166
20. Chang, C. C. and Yang, Y. T Y. 'Control of buildings using active tuned mass dampers', J. Engng Mech., ASCE 1995, 121(3), 355-366
21. Yang, J. N. and Lin, M. J. 'Optimal critical mode control of buildings under seismic load', J. Engng Mech., ASCE 1982, 108(6), 1167-1185
22. Kareem, A. 'Wind excited response in higher modes', J. Struct. Engng, ASCE 1981, 102, 701-706
23. Mackriell, L. E., Kwok, K. C. S. and Samali, B. 'Active control of along-wind and cross-wind acceleration of a tall building', Proc. 91CWE New Delhi, India, 1995, pp 1667-1678
24. Standards Australia 1170.2-1989 'SAA loading code part 2: wind loads', Standard Australia, Sydney 1989
25. Kwok K. C. S. and Melbourne, W. H. 'Wind induced lock in excitation of tall structures', J. Struct. Div., ASCE 1981, 107(1), 57-72
26. ISO 6897 Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low frequency horizontal motion (0.063-1.0 Hertz), International Standards, 1984
27. Den Hartog, J. P. Mechanical vibrations (4th edn) McGraw-Hill, New York, 1956