Particle penetration during spray forming and co-injection of ni3al + b/al2o3 intermetallic matrix composite

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 28, Issue 5, 1997, Pages 877-897

  Lawrynowicz, D E ^a   Li, B ^a   Lavernia, E J ^a  

^a University of California at Irvine   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM; ATOMIZATION; BORON; INTERMETALLICS; NICKEL; PARTICLES (PARTICULATE MATTER);

INTERMETALLIC MATRIX COMPOSITES; PARTICLE PENETRATION; PARTICULATE REINFORCEMENT;

METALLIC MATRIX COMPOSITES;

EID: 0031247425     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-997-0016-4     Document Type: Article

References (80)

1. I.N. Jujur and S. Hanada: Mater. Sci. Eng., 1995, vol. 193A, pp. 84855.
2. M.S. Kim, S. Hanada, S. Watanabe, and O. Izumi: J. Mater. Sci., 1990, vol. 25, pp. 1590-97.
3. X. Liang and E.J. Lavemia: Mater. Sci. Eng., 1992, vol. 153A, pp 654-61.
4. D.G. Morris and M.A. Moms: J. Mater. Res., 1991, vol. 6, pp 361-65.
5. J.L. Gonzalez-Carrasco, F. Garcia-Cano, G. Caruana, and M. LieblichMater. Sci. Eng., 1994, vol. 183A, pp. L5-L8.
6. W.-C. Chiou and C.-T. Hu: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 985-92.
7. Y.F. Han, S.H. Li, Y. Jin, and M.C. Chaturvedi: Mater. Sci. Eng. 1995, vols. 192A-193A, pp. 899-907.
8. B. Gieseke and V.K. Sikka: Mater. Sci. Eng., 1992, vol. 153A, pp 520-24.
9. J.-M. Yang, W.H. Kao, and C.T. Liu: Mater. Sci. Eng., 1989, vol. 107A, pp. 81-91.
10. Z.H. Xia, Y.H. Zhou, Z.Y. Mao, and B.L. Shang: Metall. Trans. B, 1992. vol. 23B, pp. 295-302.
11. D.C. Dunand, J.L. Sommer, and A. Mortensen: Metall. Trans. A, 1993. vol. 24A, pp. 2161-70.
12. S.A. Jones and J.M. Burlitch: Mater. Lett., 1994, vol. 19, pp. 233-35.
13. X. Liang and E.J. Lavemia: Mater. Sci. Eng., 1993, vol. 161A, pp. 221-35.
14. D.E. Lawrynowicz: Master's Thesis, University of California, Irvine, ÇA, 1994.
15. A. Joshi and J. Wadsworth: High Temperature Interactions of Metallic Matrices with Ceramic Reinforcements, Air Force Office of Scientific Research Report, United States Air Force, 1988.
16. M.W. Siegel and H. Henein: in Synthesis and Analysis in Materials Processing (Characterization and Diagnostics of Ceramic and Metal Paniculate Processing), E.J. Lavernia, H. Henein, and I. Anderson, eds., TMS, Warrendale, PA, 1989, p. 1.
17. V. Erukhimovitch and J. Baram: J. Mater. Sci. Technol, 1995, vol. 11, pp. 165-70.
18. J.S. Zhang, VV.J. Zhang, and G.L. Chen: in Science and Technology of Rapid Solidification and Processing, M.A. Otooni, ed., Kluwer Academic Publishers, Boston, MA, 1994, p. 135.
19. Y. Wu and E.J. Lavemia: Metall. Trans. A, 1992, vol. 23A, pp. 292337.
20. Y. Wu, J. Zhang, and E.J. Lavernia: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 135-47.
21. B. Li, X. Liang, J.C. Earthman, and E.J. Lavernia: Acta Mater., 1995, vol. 44, pp. 2409-20.
22. A. Mortensen, J.A. Cornie, and M.C. Flemings: Metall. Trans. A, 1988, vol. 19A, pp. 709-21.
23. P.K. Rohatgi, R. Asthana, and F. Yarandi: Solidification of Metal Matrix Composites, TMS, Warrendale, PA, 1990, pp. 51-75.
24. D.M. Stefenescu, A. Moitra, A.S. Kacar, and B.K. Dhindaw: Metall. Trans. A, 1990, vol. 21A, pp. 231-39.
25. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3109-18.
26. P.C. Brennan, W.H. Kao, and J.-M. Yang: Mater. Sci. Eng., 1992, vol. A153, pp. 635-40.
27. G. Cairo and W.F. Flanagan: Acta Metall. Mater., 1992, vol. 40, pp. 1809-17.
28. R. Ramesh, B. Pathiraj, B.H. Kolster, and J.H. Maas: Mater. Sci. Eng., 1992, vol. 152A, pp. 60-66.
29. V. Merlin and N. Eustathopoulos: J. Mater. Sci., 1995, vol. 30, pp. 3619-24.
30. R.N. Wright and V.K. Sikka: J. Mater. Sci., 1988, pp. 4315-20.
31. C.T. Fonvood and M.A. Gibson: Phil. Mag., 1992, vol. 66, pp. 112138.
32. T.H. Chuang: Mater. Sci. Eng., 1991, vol. 141A, pp. 169-78.
33. K. Aoki, K. Ishikawa, and T. Masumoto: Mater. Sci. Eng., 1995, vol. 193A, pp. 316-23.
34. K.K. Chawla: Composite Materials, Springer-Verlag, New York, NY, 1987.
35. F. Cosandey, R.D. Kissinger, and J.K. Tien: MRSSymp. Proc., 1982, vol. 8, pp. 173-82.
36. M. Gupta, F. Mohamed, and E. Lavernia: Metall. Trans. A, 1992, vol. 23A, pp. 845-50.
37. M. Gupta, F. Mohamed, and E. Lavernia: Metall. Trans. A, 1992, vol. 23A, pp. 831-43.
38. B.P. Bewlay and B. Cantor: Metall. Trans. B, 1990, vol. 21B, pp. 899-908.
39. P.S. Grant and B. Cantor: Cast Met., 1991, vol. 4, pp. 140-51.
40. H. Liu, R.H. Rangel, and E.J. Lavemia: Mater. Sci. Eng., 1995, vol. 191A, pp. 171-84.
41. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3097-3108.
42. H. Kurten, J. Raasch, and H. Rumpf: Chemie-Ingenieur-Technik, 1966, vol. 38, pp. 941-48.
43. J. Szekely: Fluid Flow Phenomena in Metals Processing, Academic Press, New York, NY, 1979.
44. D. Turnbull: J. Chem. Phys., 1952, vol. 20, pp. 411-19.
45. Y. Miyazawa and G.M. Pound: J. Cryt. Growth, 1974, vol. 23, pp. 45-57.
46. J.P. Hirth: Metall. Trans. A, 1978, vol. 9A, pp. 401-04.
47. D. Turnbull: in Undercooled Alloy Phases, E.W. Collings and C.C. Koch, eds., TMS-AIME, Warrendale, PA, 1987, p. 3.
48. J.W. Cahn, W.B. Billig, and G.W. Sears: Acta Metall, 1964, vol. 12, pp. 1421-39.
49. M. Epstein and H.K. Fauske: Int. J. Heat Mass Transfer, 1993, vol. 36, pp. 2987-95.
50. M. Fabbri and V.R. Voller: Num. Heat Transfer, 1995, vol. 27B, pp. 467-86.
51. E.-S. Lee and S. Ahn: Acta Metall. Mater., 1994, vol. 42, pp. 323134.
52. D. Turnbull and R.E. Cech: J. Appl. Phys., 1950, vol. 21, p. 804.
53. J.H. Perepezko and D.H. Rasmussen: Metall. Trans. A, 1978, vol. 9A, pp. 1490-92.
54. P. Mathur, D. Apelian, and A. Lawley: Acta Metall, 1989, vol. 37, pp. 429-43.
55. W.E. Ranz and W.R. Marchall: Chem. Eng. Progr., 1952, vol. 28, pp. 141-47.
56. E.J. Lavemia, E.M. Gutierrez, J. Szekely, and N.J. Grant: Int. J. Rapid Solidification, 1988, vol. 4, pp. 89-96.
57. C.G. Levi and R. Mehrabian: Metall. Trans. A, 1982, vol. 13A, pp. 221-34.
58. R. Willnecker, D.M. Herlach, and B. Feuerbacher: Appl. Phys. Lett., 1986, vol. 49, pp. 1339-41.
59. W. Gill, J.Y. Jang, J.C. Mollendorf, and C.M. Adam: J. Cryst. Growth, 1984, vol. 66, pp. 351-58.
60. J. Rodel, H. Prielipp, N. Claussen, M. Stemitzke, K.B. Alexander, P.P. Becher, and J.H. Schneibel: Scripta Metall Mater., 1995, vol. 33, pp. 843-48.
61. R. Tiwari and H. Herman: Scipta Metall. Mater., 1991, vol. 25, pp. 1103-07.
62. E.A. Brands and G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Boston, MA, 1992.
63. D.M. Stefanescu, R.V. Phalnikar, H. Pang, S. Ahuja, and B.K. Dhindaw: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 700-07.
64. H. Jones: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 751-56.
65. D. Coupard, F. Girot, and J.M. Quenisset: J. Mater. Synth. Proc., 1995, vol. 3, pp. 203-11.
66. A.E. Corte: J. Geophys. Res., 1962, vol. 67, pp. 1085-92.
67. D.R. Uhlmann, B. Chalmers, and K.A. Jackson: J. Appl. Phys., 1964, vol. 35, pp. 2986-93.
68. A.M. Zubko, V.O. Lobanov, and V.V. Nikonova: Sov. Phys. Crystall., 1973, vol. 18, pp. 239-45.
69. C. Korber, G. Rau, M.D. Cosman, and E.G. Cravalho: J. Cryst. Growth, 1985, vol. 72, pp. 649-58.
70. G.F. Boiling and J. Cisse: J. Cryst. Growth, 1971, vol. 10, pp. 56-66.
71. D.M. Stefanescu, B.K. Dhindaw, A.S. Kacar, and A. Moitra: Metall. Trans. A, 1988, vol. 19A, pp. 2847-55.
72. S.N. Omenyi and A.W. Neumann: J. Appl. Phys., 1976, vol. 47, pp. 3956-63.
73. P.K. Rohatgi, R. Asthana, and S. Das: Int. Met. Rev., 1988, vol. 31, pp. 115-22.
74. M.K. Surappa and P.K. Rohatgi: J. Mater. Sci. Lett., 1981, vol. 16, pp. 765-69.
75. A.A. Chemov, D.E. Temkin, and A.M. Mel'nikova: Sov. Phys. Crystall., 1976, vol. 21, pp. 369-74.
76. S.R. Coriell and D. Turnbull: Acta Metall, 1982, vol. 30, pp. 213539.
77. A.K. Misra: Comp. Sci. Technol., 1994, vol. 50, pp. 37-48.
78. G.L. Povirk, J.A. Horton, C.G. McKamey, T.N. Tiegs, and S.R. Nuit: J. Mater. Sci., 1988, vol. 23, pp. 3945-50.
79. Q. Zhang, R.H. Rangel, and E.J. Lavemia: Acta Mater., 1996, vol. 44, pp. 3693-3703.
80. D. Coupard, F. Girot, and J.M. Quenisset: J. Mater. Synth. Proc., 1995, vol. 3, pp. 191-201.