Calculation of fully-developed turbulent flow in rectangular ducts with nonuniform wall roughness

Journal of Fluids Engineering, Transactions of the ASME

Volumn 119, Issue 3, 1997, Pages 550-558

  Gessner, F B ^b  

^a BOEING COMPANY   (United States)

^b UNIVERSITY OF WASHINGTON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; DIFFERENTIAL EQUATIONS; DUCTS; MATHEMATICAL MODELS; REYNOLDS NUMBER; SURFACE ROUGHNESS; VELOCITY; WALL FLOW;

DEMUREN-RODI MODEL; DIFFERENTIAL STRESS MODEL; LAUNDER-LI REYNOLDS STRESS TRANSPORT EQUATION MODEL; NONUNIFORM WALL ROUGHNESS; RECTANGULAR DUCT;

TURBULENT FLOW;

EID: 0031235045     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.2819279     Document Type: Article

References (48)

1. Braun, H., and Neumann, H., 1996, “Experimental and Numerical Investigation of Turbulent Heat Transfer in a Channel with Periodically Arranged Rib Roughness Elements,” Enineering Turbulence Modellm and Experiments 3, W. Rodi and G. Bergeles, eds., Elsevier, Amsterdam, pp. 643-654.
2. Buleev, N. I., 1963, “Theoretical Model of the Mechanism of Turbulent Exchange in Fluid Flows,” AERE Translation 957, Atomic Energy Research Establishment, Harwell, England.
3. Cazalbou, J. B., and Bradshaw, P., 1993, “Turbulent Transport in Wall- Bounded Flows. Evaluation of Model Coefficients Using Direct Numerical Simulation,” Physics of Fluids, Vol. 5, No. 12, pp. 3233-3239.
4. Demuren, A. O., and Rodi, W., 1984, “Calculation of Turbulence-Driven. Secondary Motion in Non-Circular Ducts,” Journal of Fluid Mechanics, Vol. 140, pp. 189-222.
5. Fujita, H., Yokosawa, H., Hirota, M., and Nagata, C. 1988, “Fully Developed Turbulent Flow and Heat Transfer in a Square Duct with Two Roughened Facing Walls,” Chemical Engineering Communications, Vol. 74, pp. 95-110.
6. Fujita, H., Yokosawa, H., and Hirota, M., 1989, “Secondary Flow of the Second Kind in Rectangular Ducts with One Rough Wall,” Experimental Thermal and Fluid Science, Vol. 2, pp. 72-80.
7. Fujita, H., Hirota, M., and Yokosawa, H., 1990a, “Experiments on Turbulent Flow in a Square Duct with a Rough Wall,” Memoirs of the Faculty of Engineering, Nagoya University, Vol. 41, No. 2, pp. 280-294.
8. Fujita, H., Hirota, M., and Yokosawa, H., Hasegawa, M., and Gotoh, I., 1990b, “Fully Developed Turbulent Flows through Rectangular Ducts with One Roughened Wall,” JSME International Journal, Vol. 33, No. 4, pp. 692-701.
9. Gessner, F. B., 1964, “Turbulence and Mean Flow Characterisdcs of Fully- Developed Flow in Rectangular Channels,” PhD thesis, School of Mechanical Engineering, Purdue University.
10. Gessner, F. B., and Eppich, H. M., 1981, “A Near-Wall Pressure-Strain Model for Turbulent Comer Flows,” Proceedings of the Third Symposium on Turbulent Shear Flows, University of California-Davis, Sept. 9-11, 1981, pp. 225-232.
11. Han, J. C., 1988, “Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators,” ASME Journal of Heat Transfer, Vol. 110, No. 2, pp. 321-328.
12. Hinze, J. O., 1973, “Experimental Investigation on Secondary Currents in the Turbulent Flow Through a Straight Conduit,” Applied Scientific Research, Vol. 28, pp. 453-465.
13. Hirota, M., Fujita, H., Yokosawa, H., and Tanaka, Y., 1993, “Experimental Study of Fully Developed Turbulent Flow in a Rectangular Duct with Two Roughened Facing Walls,” Proceedings of the Ninth Symposium on Turbulent Shear Flows, pp. 3071-3074.
14. Hirota, M., Fujita, H., Yokosawa, H., and Tanaka, Y., 1994a, “Turbulent Flow in a Rectangular Duct with Roughened Short-Side Walls,” Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer, Lisbon, pp. 111-114.
15. Hirota, M., Fujita, H., and Yokosawa, H., 1994b, “Experimental Study on Convective Heat Transfer for Turbulent Flow in a Square Duct with a Ribbed Rough Wall (Characteristics of Mean Temperature Field),” ASME Journal of Heat Transfer, Vol. 116, No. 2, pp. 332-340.
16. Hirota, M., Fujita, H., Yokosawa, H., and Tanaka, Y., 1995, “Measurement of Fully Developed Turbulent Flow through Rectangular Duct with Roughened Short-Side Walls,” Transactions of JSME, Vol. 61, No. 582, pp. 420-427 (in Japanese).
17. Hirota, M., Fujita, H., Yokosawa, H., and Tanaka, Y., 1996, “Characteristics of Turbulent Flow in a Rectangular Duct with Rib-Roughened Long-Side Walls,” accepted for presentation at the Ninth International Symposium on Transport Phenomena (ISTP-9) in Thermal Engineering, Singapore, June 25-28, 1996.
18. Hong, Y.-J., and Hsieh, S.-S., 1993, “Heat Transfer and Friction Factor Measurements in Ducts With Staggered and In-Line Ribs,” ASME Journal of Heat Transfer, Vol. 115, No. 1, pp. 58-65.
19. Hsieh, S.-S., and Hong, Y.-J., 1989, “Separating Flow Over Repeated Surface- Mounted Ribs in a Square Duct,” AIAA Journal, Vol. 27, No. 6, pp. 770-776.
20. Hsieh, S.-S., and Hong, S.-S., 1995, “Heat Transfer Coefficients in an Orthogonally Rotating Duct with Turbulators,” ASME Journal of Heat Transfer, Vol. 117, No. 1, pp. 69-78.
21. Hwang, J.-J., and Liou, T.-M., 1994, “Augmented Heat Transfer in a Rectangular Channel with Permeable Ribs Mounted on the Wall,” ASME Journal of Heat Transfer, Vol. 116, No. 4, pp. 912-920.
22. Hwang, J.-J., and Liou, T.-M., 1995, “Heat Transfer and Friction in a Low- Aspect-Ratio Rectangular Channel with Staggered Perforated Ribs on Two Opposite Walls,” ASME Journal of Heat Transfer, Vol. 117, No. 4, pp. 843-850.
23. Lacovides, H., Jackson, D. C., Kelemenis, G., Launder, B. E., and Yuan, Y.-M., 1996, “LDA Study of the Flow Development Through an Orthogonally Rotating U-Bend of Strong Curvature and Rib-Roughened Walls,” Engineering Turbulence Modelling and Experiments 3, W. Rodi and G. Bergeles, eds., Elsevier, Amsterdam, pp. 561-570.
24. Launder, B. E., Reece, G. J., and Rodi, W., 1975, “Progress in the Development of a Reynolds-Stress Turbulence Closure,” Journal of Fluid Mechanics, Vol. 68, Part 3, pp. 537-566.
25. Launder, B. E., and Li, S.-P., 1993, “On the Prediction of Flow Over Riblets via 2nd-Moment Closure,” Near-Wall Turbulent Flows, (R. M. C. So, C. G. Speziale, and B. E. Launder eds.), Elsevier Science Publishers, New. York, pp. 739-748.
26. Launder, B. E., and Li, S.-P., 1994, “On the Elimination of Wall-Topography Parameters from Second-Moment Closure,” Physics of Fluids, Vol. 6, No. 2, pp. 999-1006.
27. Liou, T.-M., and Hwang, J.-J., 1992, “Turbulent Heat Transfer Augmentation and Friction in Periodic Fully Developed Channel Flows,” ASME Journal of Heat Transfer, Vol. 114, No. 1, pp. 56-64.
28. Liou, T.-M., and Hwang, J.-J., 1993, “Effect of Ridge Shapes on Turbulent Heat Transfer and Friction in a Rectangular Channel,” International Journal of Heat and Mass Transfer, Vol. 36, No. 4, pp. 931-940.
29. Liou, T.-M., Wu, Y.-Y., and Chang, Y., 1993a, “LDV Measurements of Periodic Fully Developed Main and Secondary Flows in a Channel with Rib-Disturbed Walls,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 115, No. 1, pp. 109-114.
30. Liou, T.-M., Hwang, J.-J., and Chen, S.-H., 1993b, “Simulation and Measurement of Enhanced Turbulent Heat Transfer in a Channel with Periodic Ribs on One Principal Wall,” International Journal of Heat and Mass Transfer, Vol. 36, No. 2, pp. 507-517.
31. Liou, T.-M., Wang, W.-B., and Chang, Y.-J., 1995, “Holographic Interferometry Study of Spatially Periodic Heat Transfer in a Channel with Ribs Detached From One Wall,” ASME Journal of Heat Transfer, Vol. 117, No. 1, pp. 32-39.
32. Lockett, J. F., and ColUns, M. W., 1990, “Holographic Interferometry Applied to Rib-Roughness Heat Transfer in Turbulent Flow,” International Journal of Heat and Mass Transfer, Vol. 33, No. 11, pp. 2439-2449.
33. Myong, H. K., and Kobayashi, T., 1991, “Prediction of Three-Dimensional Turbulent Flow in a Square Duct With an Anisotropic Low-Reynolds-Number k-e Model,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 113, No. 4, pp. 608- 615.
34. Naimi, M., 1993, “Numerical Simulation of Turbulence-Induced Secondary Flow in Rectangular Ducts,” PhD Thesis, Department of Mechanical Engineering, University of Washington.
35. Naimi, M., and Gessner, F. B., 1995, “A Calculation Method for Developing Turbulent Flow in Rectangular Ducts of Arbitrary Aspect Ratio,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 117, No. 6, pp. 249-258.
36. Rodi, W., 1976, “A New Algebraic Relation for Calculating the Reynolds Stresses,” Zeitschrift fUr Angewandte Mathematik und Mechanik, Vol. 56, pp. T219-T221.
37. Rotta, J. C., 1962, “Statistische Theorie Nichthomogener Turbulenz,” Zeitschrift fur Physik, Vol. 129, pp. 547-572.
38. Sugiyama, H., Akiyama, M., and Serizawa, T., 1991, “Numerical Analysis of Developing Flow in a Square Duct Using Reynolds Stress Model,” Proceedings of the ASME/JSME Thermal Engineering Joint Conference, Vol. 3, pp. 159-165.
39. Sugiyama, H., Akiyama, M., Matsumoto, M., Hirata, M., and Ninomiya, N., 1993a, “Numerical Analysis on Fully Developed Turbulent Flow in a Square Duct with a Rough Wall,” Transactions of JSME, Vol. 59, No. 561, pp. 1510- 1517 (in Japanese).
40. Sugiyama, H., Akiyama, M., Matsumoto, M., Hirata, M., and Ninomiya, N., 1993b, “Numerical Analysis of Fully Developed Turbulent Flow in a Square Duct with Two Roughened Facing Walls,” Transactions of JSME, Vol. 59, No. 561, pp. 1502-1509 (in Japanese).
41. Sugiyama, H., Akiyama, M., Matsumoto, M., Hirata, M., and Ninomiya, N., 1993c, “Numerical Analysis of Fully Developed Turbulent Flow in a Square Duct with Two Facing Roughened Walls,” Journal of Computational Fluid Dynamics, Vol. 2, No. 3, pp. 319-338.
42. Sugiyama, H., Akiyama, M., Matsumoto, M., Furusawa, S., and Hirata, M., 1993d, “Numerical Analysis of Fully Developed Turbulent Flow in a Rectangular Duct with One Roughened Long-Side Wall,” Transactions of JSME, Vol. 59, No. 568, pp. 3781-3788 (in Japanese).
43. Sugiyama, H., Akiyama, M., and Matsumoto, M., 1995, “Numerical Analysis of Turbulent Structure and Heat Transfer in a Square Duct With One Rough Wall,” Proceedings of the ASME/JSME Thermal Engineering Joint Conference, L. S. Fletcher and T. Aihara, eds., Book No. H0933A, ASME Publications, New York.
44. Tatchell, D. E., 1975, “Convection Processes in Confined, Three-Dimensional Boundary Layers,” Ph.D. dissertation. Mechanical Engineering Department, Imperial College, London.
45. Yokosawa, H., Fujita, H., Hirota, M., and Iwata, S., 1989, “Measurement of Turbulent Flow in a Square Duct with Roughened Walls on Two Opposite Sides,” International Journal of Heat and Fluid Flow, Vol. 10, No. 2, pp. 125-130.
46. Youn, B., Yuen, C. and Mills, A. F., 1994, “Friction Factor for Flow in Rectangular Ducts with One-Side Rib Roughened,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 116, No. 9, pp. 488-493.
47. Zhang, N., Chiou, J., Fann, S., and Yang, W.-J., 1993, “Local Heat Transfer Distribution in a Rotating Serpentine Rib-Roughened Flow Passage,” ASME Journal of Heat Transfer, Vol. 115, No. 3, pp. 560-567.
48. Zhang, Y. M., Gu, W. Z., and Han, J. C., 1994, “Heat Transfer and Friction in Rectangular Channels With Ribbed or Ribbed-Grooved Walls,” ASME Journal of Heat Transfer, Vol. 116, No. 1, pp. 58-65.