Comparison of uniaxial and triaxial rosette gages for strain measurement in the femur

Experimental Mechanics

Volumn 37, Issue 3, 1997, Pages 350-354

  Cristofolini, L ^a   Viceconti, M ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

HIP PROSTHESES; IMPLANTS (SURGICAL); STIFFNESS; STRAIN MEASUREMENT; STRESS CONCENTRATION;

STRESS SHIELDING; TRIAXIAL ROSETTE GAGES; UNIAXIAL ROSETTE GAGES;

STRAIN GAGES;

EID: 0031234372     PISSN: 00144851     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02317430     Document Type: Review

References (42)

1. Little, E.G. and Finlay, J.B., "Perspectives of Strain Measurement Techniques," Strain Measurement in Biomechanics, eds. A.W. Miles and K.E. Tanner, Chapman & Hall, London, 1-14 (1992).
2. Tuttle, M.E. and Brinson, H.F., "Resistance-foil Strain Gage Technology as applied to Composite Materials," EXPERIMENTAL MECHANICS, 24 (1), 54-65 (1984).
3. Little, E.G., "Strain Gage Measurement," Strain Measurement in Biomechanics, eds. A.W. Miles and K.E. Tanner, Chapman & Hall, London. 39-57 (1992).
4. Otani, T., Whiteside, L.A. and White, S.E., "Strain Distribution in the Proximal Femur with Flexible Composite and Metallic Femoral Components under Axial and Torsional Loads," J. Biomed. Mat. Res., 27, 575-585 (1993).
5. Jasty, M., O'Connor, D.O., Henshaw, R.M. and Harrigan, T.P., "Fit of the Uncemented Femoral Component and the Cement Influence the Strain Transfer to the Femoral Cortex," J. Biomech. 12, 648-656 (1994).
6. Oh, I. and Harris, W.H., "Proximal Strain Distribution in the Loaded Femur: An In Vitro Comparison of the Distribution in the Intact Femur and after Insertion of Different Hip-replacement Femoral Components," J. Bone Jt. Surg., 60-A, 75-85 (1978).
7. Crowninshield, R.D., Brand, R.A., Johnston, R.C. and Milroy, J.C., "An Analysis of Femoral Component Design in Total Hip Arthroplasty," J. Bone Jt. Surg., 62-A, 68-78 (1980).
8. Crowninshield, R.D., Pedersen, D.R. and Brand, R.A., "A Measurement of Proximal Femur Strain with Total Hip Arthroplasty," J. Biomech. Eng., 102, 230-235 (1980).
9. Shybut, G.T., Askew, M.J., Hori, R.Y. and Stulberg, S.D., "Theoretical and Experimental Studies on Femoral Stresses Following Surface Replacement Hip Arthroplasty," Proc. Inst. Med. Chir., 33 (3), 95-106 (1980).
10. Huiskes, R., Janssen, J.D. and Sloof, T.J., "A Detailed Comparison of Experimental and Theoretical Sress-analyses of a Human Femur," Mechanical Properties of Bone, ASME AMD 45, ed. S.C. Cowin, New York, 211-234 (1981).
11. Rohlmann, A., Mossner, U., Bergmann, G. and Kolbel, R., "Finite-element-analysis and Experimental Investigation of Stresses in a Femur," J. Biomed. Eng., 7,241-246 (1982).
12. Rohlmann, A., Mossner, U., Bergmann, G. and Kolbel, R., "Finite-element-analysis and Experimental Investigation in a Femur with Hip Endoprosthesis," J. Biomech., 16, 727-742 (1983).
13. Prati, E., Freddi, A. and Toni, A., "Indagine sperimentale sul comportamento a fatica di un femore con protesi d'anca," Rassegna di Bioingegneria, 10, 149-157 (1986).
14. Lewis, J.L., Askew, M.J., Wixson, R.L., Kramer, G.M. and Tarr, R.A., "The Influence of Prosthetic Stem Stiffness and of a Calcar Collar on Stresses in the Proximal End of the Femur with a Cemented Femoral Component," J. Bone Jt. Surg., 66-A, 280-286 (1984).
15. Panjabi, M.M., Trumble, T., Hult, J.E. and Southwick, W., "Effect of Femoral Stem Length on Stress Raisers Associated with Revision Hip Arthroplasty," J. Orthop. Res., 3, 447-455 (1985).
16. Manley, M.T., Stern, L.S., Kotzar, G. and Stulberg, B.N., "Femoral Component Loosening in Hip Arthroplasty: Cadaver Study of Subsidence and Hoop Strain," Acta Orthop. Scand., 58, 485-490 (1987).
17. Jones, L.C. and Hungerford, D.S., "The Photoelastic Coating Technique - Its Validation and Use," 33rd Annual Meeting, Orthopaedic Research Society Book of Abstracts, San Francisco, CA 406 (1987).
18. Djerf, K. and Gillquist, J., "Calcar Unloading after Hip Replacement: A Cadaver Study of Femoral Stem Design," Acta Orthop. Scand., 58, 97-103 (1987).
19. Walker, P.S., Schneeweist, D., Murphy, S. and Nelson, P., "Strain and Micromotions of Press-fit Femoral Stem Prostheses," J. Biomech., 20, 693-702 (1987).
20. Diegel, P.D., Daniels, A.U. and Dunn, H.K., "Initial Effect of Collarless Stem Stiffness on Femoral Bone Strain," J. Arthroplasty, 4, 173-178 (1989).
21. Delécrin, J., Passuti, N., Royer, J., Rogez, J.M. and Bainvel, J.V., "Extensometrie et ancrage primaire d'implants femoraux. Etude de l'appui endocortical métaphysaire supérior de l'implant sans ciment B.P.R.," Acta Orthop. Belg., 55, 150-161 (1989).
22. Field, R.E. and Rushton, N., "Proximal Femoral Surface Strain Gauge Analysis of a New Epiphyseal Prosthesis," J. Biomed. Eng., 11, 123-129 (1989).
23. Szivek, J.A., Weng, M. and Karpman, R., "Variability in the Torsional and Bending Response of a Commercially Available Composite Femur," J. Appl. Biomat., 1, 183-186 (1990).
24. Finlay, J.B., Rorabeck, C.H., Bourne, R.B. and Tew, W.M., "In Vitro Analysis of Proximal Femoral Strains Using PCA Femoral Implants and a Hip-abductor Muscle Simulator," J. Arthroplasty, 4, 335-349 (1989).
25. Finlay, B.J., Chess, D.G., Hardie, W.R., Rorabeck, C.H. and Bourne, R.B., "An Evaluation of Three Loading Configurations for the In Vitro Testing of Femoral Strains in Total Hip Arthroplasty," J. Orthop. Res., 9, 749-759 (1991).
26. Szivek, J.A. and Gealer, R.L., "Comparison of the Deformation Response of Synthetic and Cadaveric Femora during Simulated One-legged Stance," J. Appl. Biomat., 2, 277-280 (1991).
27. Bobyn, J.D., Mortimer, E.S., Glassman, A.H., Engh, C.A., Miller, J.E. and Brooks C.E., "Producing and Avoiding Stress Shielding: Laboratory and Clinical Observations of Noncemented Total Hip Arthroplasty," Clin. Orthop. Rel. Res., 274, 79-96 (1992).
28. Schmotzer, H., Tchejvan, G. and Song, J., "A Comparison of Various Loading Configurations of the Proximal Femur for the Evaluation of Reconstructive Surgical Procedures," Proc. Instn. Mech. Engrs. Part H, J. Eng. Medicine, 206, 29-36 (1992).
29. Otani, T., Leo, A. and Whiteside, L.A., "Failure of Cementless Fixation of the Femoral Component in Total Hip Arthroplasty," Orthropaedic Clin. North Am. 23-2, 335-346 (1992).
30. Engh, C.A., O'Connor, D., Jasty, M., McGovern, T.F., Bobyn, J.D. and Harris, W.H., "Quantification of Implant Micromotion, Strain Shielding, and Bone Resorption with Porous-coated Anatomic Medullar Locking Femoral Prostheses," Clin. Orthop. Rel. Res., 285, 13-29 (1992).
31. Okumura, Y., Imura, S., Oomori, H., Ichihashi, K. and Takedani, H., "Micromotions and Strains of Cementless Femoral Prostheses," Biomechanics in Orthopedics, eds. S. Niwa, S.M. Perren and T. Hattori, Springer-Verlag, Tokyo, 46-75 (1992).
32. Vander Sloten, J., Labey L., Van Audekercke, R., Helsen, J. and Van der Perre, G., "The Development of a Physiological Hip Prosthesis: The Influence of Design and Materials," J. Ma. Sci.: Material in Medicine, 4, 407-414 (1993).
33. Vander Sloten, J., Labey, L., Van Audekercke, R. and Van der Perre, G., "The Development of a Physiological Hip Prosthesis: Evaluation of the Strains after Implantation of a Prototype of Hip Implant: Experiment in a Dry Femur," Biomed. Mat. Eng., 3, 1-13 (1993).
34. Blaimont, P., Delronge, G., Smeyers, B., Halleux, P., Lasudry, N. and Sintzoff, S., "Etude anatomique et extensometrique concernant la collarette d'appui et le manche de la prothese base de la conception d'une prothese anatomique" Acta Orthop. Belg., 59, 170-181 (1993).
35. Munting, E. and Verhelpen, M., "Fixation and Effect on Bone Strain Pattern of a Stemless Hip Prosthesis," J. Biomech., 28, 949-961 (1995).
36. Cristofolini, L., Viceconti, M., Toni, A. and Giunti, A., "Influence of Thigh Muscles on the Axial Strains in a Proximal Femur during Early Stance in Gait," J.Biomech., 28 (5), 617-624 (1995).
37. Cristofolini, L., Cappello, A., Viceconti, M., Toni, A. and Giunti, A., "A Validation of Synthetic Femur Models in Relation with Comparative Stress Shielding Studies of Hip Stems," Abstracts of the 2nd World Congress of Biomechanics, eds. L. Blankervoort and J.G.M. Kooloos, Stichting World Biomechanics, vol. 1, Nijmegen, 105 (1994).
38. Cristofolini, L., Viceconti, M., Cappello, A. and Toni, A., "Mechanical Validation of Whole Bone Composite Femur Models," J. Biomech., 29 (4), 525-535 (1996).
39. Ruff, C.B., "Structural Changes in the Lower Limb Bones with Aging at Pecos Pueblo," Doctoral dissertation, University of Pennsylvania (1981).
40. McNamara, B.P., Viceconti, M., Cristofolini, L., Toni, A. and Taylor, D., "Experimental and Numerical Pre-clinical Evaluation Relating to Total Hip Arthroplasty," Computer Methods in Biomechanics and Biomedical Engineering, eds. J. Middleton, M.L. Jones and G.N. Pande, Gordon and Breach, Amsterdam, 1-10 (1996).
41. Cristofolini, L., McNamara, B.P., Cappello, A., Toni, A. and Giunti, A., "A New Protocol for Stress Shielding Tests of Hip Prostheses," Abstracts of the 2nd World Congress of Biomechanics, eds. L. Blankervoort and J.G.M. Kooloos, Stichting World Biomechanics, vol. 2, Nijmegen, 338 (1994).
42. Cristofolini, L., McNamara, P., Cappello, A. and Toni, A., "Errors in Stress-shielding Evaluation of Cementless Hip Stems," Trans. 15th I.S.B. Congress, eds. K. Häkkinen, K.L. Keskinen, P.V. Komi and Mero, Gummerus, Finland, 188-189 (1995).