Aerospace thermal-structural testing technology

Applied Mechanics Reviews

Volumn 50, Issue 9, 1997, Pages 477-498

  Thornton, Earl A ^a  

^a University of Virginia   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMIC HEATING; BOUNDARY CONDITIONS; COOLING; EARTH ATMOSPHERE; HEATING; MECHANICAL TESTING; SPACE FLIGHT; TECHNOLOGY;

AEROSPACE THERMAL STRUCTURAL TESTING TECHNOLOGY; FLIGHT TESTS; INSTRUMENTATION; THERMAL STRUCTURAL PHENOMENA;

AEROSPACE ENGINEERING;

EID: 0031233283     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101738     Document Type: Article

References (121)

1. Anderson JD Jr (1989), Hypersonic and High Temperature Gas Dynamics, McGraw-Hill, New York.
2. Anderson KF (1990), Effects of data acquisition and control on the quality of test data, Workshop on Correlation of Hot Structures Test Data with Analysis, Vol I, NASA CP 3065,208-236.
3. Anderson MS and Card MF (1962), Buckling of ring-stiffened cylinders under a pure bending moment and a nonuniform temperature distribution, NASA TN D-1513.
4. Anonymous (1967), BAC SUD-aviation Concorde, Flight Int 91(5) 799-816.
5. Anonymous (1990), Workshop on correlation of hot structures test data with analysis, NASA Conf Publ 3065, Vols 1 and II.
6. Baals DB and Corliss WR (1981), Wind Tunnels of NASA, US Government Printing Office, Washington DC, NASA SP-440, 95-96.
7. Blackall TE (1969), Concorde, GT Foulis, Great Britain.
8. Blosser ML and Nowak RJ (1990), Thermal-structural tests of a water-glycol cooled aluminum panel, Workshop on Correlation of Hot Structures Test Data With Analysis, Vol I, NASA CP 3065,158-178.
9. Blosser ML (1995), Boundary conditions for aerospace thermal-structural tests, Aerospace Thermal Structures and Materials for a New Era, Thornton EA (ed), AIAA Progress in Astronautics and Aeronautics, 168, Washington DC, 119-144.
10. Boggs BC (1979), History of Static Test and Air Force Structures Testing, Air Force Flight Dyn Lab, AFFDL-TR-3071.
11. Brumfield ML, Pappa RS, Miller JB, and Adams RR (1985), Langley Research center photogrammetric measurements of solar array dynamics: Preliminary results, Proc of Large Space Antenna Systems Technology 1984 Conf NASA Conf Publ 2368, Part 2, 517-545.
12. Bushnell D and Smith S (1971), Stress and buckling of nonuniformly heated cylindrical and conical shells, AIAA 79(12) 2314-2321.
13. Byrom SL and Edsinger LE (1977), Preliminary analysis of remote infrared imagery of shuttle during entry: An aerothermodynamic flight experiment, NASA TM 73251.
14. Carter A and Fields RA (1990), Space shuttle test and analysis, Workshop on Correlation of Hot Structures Test Data with Analysis, Vol I, NASA CP 3065,203-237.
15. Chevalier R (1974), Concorde and safety: Design, testing and certification, Aeronaut J 78(762) June, 277-283.
16. Clevenson SA and Daniels EF (1992), Capabilities of the Thermal Acoustic Fatigue Apparatus, NASA Tech Memo 104-106.
17. Coyle MF (1995), Thermal buckling of plates due to localized heating: an experimental investigation, PhD Dissertation, Univ of Virginia.
18. Cunningham FG (1961), Power input to a small flat plate from a diffusely radiating sphere with applications to earth satellites, NASA TN D-710.
19. David K and Felback DK (1995), Toughened graphite-epoxy composites exposed in near-earth orbit for 5.8 years, J Spacecraft Rockets 32(2) 317-323.
20. DeAngelis MV and Fields RA (1990), Techniques for hot structures testing, NASA Tech Memo 101727.
21. DeAngelis MV and Fields RA Thermal Structures and Materials for High-Speed Flight, Thornton EA (ed) AIAA Progress in Astronautics and Aeronautics, 140, Washington DC, 1992, 255-277.
22. Dechaumphai P, Thornton EA, and Wieting AR (1989), Flow-thermal-structural study of aerodynamically heated leading edges, J Spacecraft Rockets 26(4) July-Aug, 201-209.
23. DeJamette FR, Hamilton HH, Weilmuenster KJ, and Cheatwood FM (1987), Review of some approximate methods used in aerodynamic heating analysis, J Thermophys Heat Transfer 1(1), 5-12.
24. Doebelin EO (1990), Measurement Systems Application and Design, Fourth Edition, McGraw-Hill, New York.
25. Dowell LJ, Gillies GT, Allison SW, and Gates MR (1987), Research Bibliography on the temperature dependencies of thermographic phosphors, Letter to the Editor, J Luminescence 36, 375-376.
26. Dunavant JC, Myrick DL, Zoby EV, and Throckmorton DA (1990), Shuttle infrared leeside temperature sensing (SILTS) experiment: STS 61-C Final Results, NASA Tech Paper 2958.
27. Eckert ERG (1956), Engineering relations for heat transfer and friction in high-velocity laminar and turbulent boundary-layer flow over surfaces with constant pressure and temperature, Trans ASME 78(6) 1273-1283.
28. Fields RA and Vano A (1969), Evaluation of an infrared heating simulation of a Mach 4.63 flight on an X-15 horizontal stabilizer, NASA TN D-5403.
29. Fields RA (1992), Flight vehicle testing with infrared lamps, NASA TM 4336.
30. Gallagher RF, Quinn JF, and Turrentine D (1961), Techniques for testing thermally affected complex structures, Exp Mech, Aug, 41-49.
31. Garrick IE (1963), Survey of aerothermoelasticity, Aerospace Eng 22(1) 140-147.
32. Gong L, Quinn RD, and Ko WL (1990), Reentry heating analyses of space shuttle with comparisons of flight data, Workshop on Correlation of Hot Structures Test Data with Analysis, Vol I, NASA CP 3065,271-294.
33. Gossard ML, Seide P, and Roberts WM (1952), Thermal buckling of plates, NACA TN 2771.
34. Greer HLC and Oberle LG (1993), Laser speckle technique for measuring strain in fibers and wires at high temperatures, Proc of Structures Testing Technology at High Temperature-II Conf, SEM, 149-154.
35. Hannah RL and Reed SE (eds) (1992), Strain Gage Users' Handbook, SEM, Elsevier, London.
36. Hanson HA and Casey JJ (1987), High-temperature test technology, Air Force Flight Dyn Lab, AFWAL: TR-86-3105.
37. Harpur NF (1968a), Structural development of the Concorde, Aircraft Eng, March, 18-30.
38. Harpur NF (1968b), Concorde structural development, J Aircraft 5(2) 176-183.
39. Harrison TD, Buckington R, and Vigneron FR (1974), Functional and dynamic testing of the flexible solar array for the communications technology satellite, Space Simulation, NASA SP-379, 261-277.
40. Heldenfels RR and Roberts WM (1952), Experimental and theoretical determination of thermal stresses in a flat plate, NACA TN 2769.
41. Heldenfels RR (1982), Historical perspectives on thermostructural research at the NASA Langley Aeronautical Laboratory from 1948 to 1958, NASA Tech Memo 83266.
42. Hill HC, Young LE, and Turner GF (1985), Solar array flight experiment (SAE) flight experience, Proc of Large Space Antenna Systems Tech 1984 Conf, NASA Conf Publ 2368, Part 2, 845-854.
43. Holanda R (1992), Thin Film Thermocouples for high temperature measurement on ceramic materials, Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Tech for Aerospace Applications in High-Temperature Environments, NASA CP-3161, 81-96.
44. Hudson LD and Thompson RC (1991), Single-strain-gage force-stiffness buckling prediction techniques on a hat-stiffened panel, NASA Tech Memo 101733.
45. Hughes PC (1986), Spacecraft Attitude Dynamics, John Wiley, New York.
46. Jenkins JM and Montoya CA (1983), Experimental creep data for a built-up aluminum-titanium structure subjected to heating and loading, NASA Tech Memo 84906.
47. Kehoe MW and Snyder HT (1991a), Thermoelastic vibration test techniques, NASA Tech Memo 101742.
48. Kehoe MW and Snyder HT (1991b), High temperature ground vibration test techniques, Proc of Structural Testing Technology At High Temperatures Conf, SEM, Dayton OH, 17-26.
49. Kelly HN and Sikora TP (1991), Actively cooled panel testing: perils, problems, and pitfalls, SEM Structural Testing Technology at High Temperatures Conf, Dayton OH.
50. Kelly HN and Blosser ML (1992), Active cooling from the sixties to NASP. Cuirent Technology for Thermal Protection Systems, Scotti SJ (ed), NASA CP 3157, 189-249.
51. Kidd CT (1992), High heat flux measurements and experimental calibra-tions-characterizations, Proc of 1992 NASA Langley Measurement Technology Conf: Measurement Tech for Aerospace Applications in High-Temperature Environments, NASA CP-3161, 31-50.
52. Ko WL, Quinn RD, Gong L, Schuster LS, and Gonzales D (1981), Reentry heat transfer analyses of the space shuttle orbiter, Computational Aspects of Heat Transfer in Structures, Adelman HM (ed), NASA CP 2216, 295-325.
53. Kordes EE, Reed RD, and Dawey AL (1962), Structural heating experiences on the X-15 airplane, NASA Tech Memo X-711, originally classified Confidential, unclassified 1971.
54. Krieth F (1962), Radiation Heat Transfer for Spacecraft and Solar Power Plant Design, Int Textbook, Scranton PA, 95-96.
55. Kumar R and Ahmed S (1972), Bending and flexing of the Apollo 15 mass spectrometer boom, J Spacecraft Rockets, 9(12) 940-942.
56. Lant CT (1992), Laser-based measurements for high temperature applications, Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Technology for Aerospace Applications in High-Temperature Environments, NASA CP-3161,245-249.
57. Lemcoe MM (1992a), Strain measurements above 1200 °Fusing resistance strain gages, Ch 6, Strain Gage Users’ Handbook, Hannah RL and Reed SE (eds), SEM, Elsevier, London, 225-252.
58. Lemcoe MM (1992b), High-temperature strain measurement techniques: current developments and challenges, Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Tech for Aerospace Applications in High-Temperature Environments, NASA CP-3161, 127-169.
59. Lemer EJ (1991), Bringing back a long look at space, Aerospace Am, Aug, 29-31.
60. Leyman CS (1986), Review of the technical development of Concorde, Prog Aerospace Sci 23, 185-238.
61. Leatherwood JD, Clevenson SA, Powell CA and Daniels EF (1992), Acoustic testing of high-temperature panels,-J Aircraft 29(6) 1130-1136.
62. McWithey RR and Vosteen LF (1960), Effects of transient heating on the vibration frequencies of a prototype of the X-15 wing, NASA TN D-362.
63. Merski NR (1991), Relative-intensity two-color phosphor thermography system, NASA TM 104123.
64. Miller J (1983), X-Planes. X-l to X-29, Specialty Press, Marine on St Croix MN.
65. Miller J (1985), Lockheed SR-71, Aerofax Minigraph 1, Arlington TX.
66. Neumann RD (1992), Temperature and heat flux measurements: challenges for high temperature aerospace application, Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Tech for Aerospace Applications in High-Temperature Environments, NASA CP-3161,1-30.
67. Modest MF (1980), Solar flux incident on an orbiting surface after reflection from a planet, AIAA J 18(6) 727-730.
68. Ng CF (1989), Nonlinear and snap-through responses of curved panels to intense acoustic excitation, J Aircraft 26(3) 281-288.
69. Ng CF and Clevenson SA (1989), High intensity acoustic tests of a thermally stressed aluminum plate in TAFA, NASA Tech Memo 101552.
70. Ng CF (1991), High intensity acoustic tests of a thermally stressed plate, J Aircraft 28(4) 275-281.
71. N’Guyen VP and Ripley EL (1967), Design philosophy and fatigue testing of Concorde, Proc of 5th 1CAF Symp, Melbourne, Australia, 403-437.
72. Nicholls DW (1992), Elevated temperature strain gage application (150 -600°F), Ch 4 Strain Gage Users' Handbook, Hannah RL and Reed SE (eds), SEM, Elsevier, London, 159-175.
73. Nuss, HE (1980), Solar panel thermal cycling testing by solar simulation and infrared radiation methods, Ilth Space Simulation Conf NASA ConfPubl 2150, 318-329.
74. Orlebar C (1986), Concorde Story, Temple Press, Great Britain.
75. Pisacane VL and Moore RC (eds) (1994), Fundamentals of Space Systems, Oxford Univ Press, New York, 458-460.
76. Post D (1993), Moire interferometry, Ch 7, Handbook on Experimental Mechanics, Second Edition, Kobayashi AS (ed), SEM, 297-364.
77. Pride RA, Royster DM, and Helms BF (1964), Design, tests, and analysis of a hot structure for lifting reentry vehicles, NASA TN D-2186.
78. Puster RL (1991), Research capabilities of the NASA Langley 8-ft high temperature tunnel, Proc of Structural Testing Technology at High Temperatures Conf SEM, Dayton OH, 9-16.
79. Ranson WF, Sutton MA, and Peters WF (1993), Holographic and laser speckle interferometry, Ch 8, Handbook on Experimental Mechanics, Second Edition, Kobayashi AS (ed), SEM, 365-405
80. Rauch BJ and Rowlands RE (1993), Thermoelastic stress analysis, Ch 14, Handbook on Experimental Mechanics, Second Edition, Kobayashi AS (ed), SEM, 581-599.
81. Rizzi S (1993), Experimental research activities in dynamic response and sonic fatigue of hypersonic vehicle structures at NASA Langley Research Center, AIAA Paper No. 93-0383.
82. Schleicher RL(1963), Structural design of the X-5, J Royal Aeronaut Society 61(634) 618-636.
83. Schock RW, Nesman TE, and Reed DK (1985), MSFC data analysis of the SAFE-DAE experiment, Proc of Large Space Antenna Systems Tech 1984 Conf NASA ConfPubl 2368, Part 2, 505-516.
84. Sciammarella CA (1987), Strain measurement at high temperatures by optical techniques, Proc of 4th Annual Hostile Environments and High Temperature Measurements Conf, SEM, 44-52.
85. Sciammarella CA(1989), Measurement of strains at high temperatures by means of a portable moire camera, Proc of Hostile Environments and High Temperature Measurements Conf, SEM, 21-26.
86. Sharpe Jr WN (1993), High temperature strain-displacement measurement, Ch 13, Handbook on Experimental Mechanics, Second Edition, Kobayashi AS (ed), SEM, 557-579.
87. Shideler JL, Dixon SC, and Shore CP (1966), Flutter at Mach 3 of thermally stressed panels and comparison with theory for panels with edge rotational restraint, NASA TN D-3498.
88. Shideler JL (1992), Predicted and test performance of durable TPS, Current Technology for Thermal Protection Systems, compiled by Scotti SJ, NASA CP 3157 97-129.
89. Shore CP (1969), Experimental investigation of flutter at Mach 3 of rotationally restrained panels and comparison with theory, NASA TN D-5508, Oct 1969.
90. Shore CP (1986), Review of convectively cooled structures for hypersonic flight, SAE Aerospace Vehicle Tech Conf, NASA TM-87740.
91. Siegel R and Howell JR (1981), Thermal Radiation Heat Transfer, Second Edition, Hemisphere.
92. Sikora TP and Legar KB (1991), Simulation of high heat flux levels with graphite heating and arc lamps, Proc of Structural Testing Technology at High Temperatures Conf, SEM, Dayton OH, 3-8.
93. Sikora TP (1993), WL actively cooled structures test facility, Proc of Structural Testing Technology at High Temperature-Il Conf, Ojai CA 71-77.
94. Sincarsin WG, McTavish DJ, Sincarsin GB, and Soucy Y (1990), Space based radar-test of large structures, Proc of 6th CASI Conf on Astronautics, Canadian Aeronautics Space Inst, 221-234.
95. Singh JJ and Antcliff RR (Editors) (1992), Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Technology for Aerospace Applications in High-Temperature Environments, NASA CP-3161.
96. Snyder HT and Kehoe MW (1991), Determination of the effects of heating on modal characteristics of an aluminum plate with application to hypersonic vehicles, NASA Tech Memo 4274.
97. Stillwell WH (1965) X-I5 Research Results with a Selected Bibliography, NASA SP-60.
98. Sumi S, Murozono M, Imoto T, and Nakazato S (1990a), Thermally-induced bending vibration of thin-walled boom with tip mass - analysis for the experiments under laboratory condition (Japanes) Tech Reports of Kyushu Univ 63(1) 63-70.
99. Sumi S, Murozono M, Nakazato S, and Tatsuyama Y (1990b), Thermally-induced bending vibration of thin-walled boom with tip mass - verification by experiments in the atmosphere (Japanese), Tech Reports of Kyushu Univ, 63(2) 167-175.
100. Taylor J (1958), Experimental methods in high temperature structural research, Chapter in High Temperature Effects In Aircraft Structures, HoffNJ (ed), AGARDograph 28, Pergamon Press, New York, 313-322.
101. Teare WP and Fields RA (1992), Buckling analysis and test correlation of high temperature structural panels, Thermal Structures and Materials for High-Speed Flight, Thornton EA (ed), Progress in Astronautics and Aeronautics, 140, AIAA, Washington DC, 337-352.
102. Terrell JP, Hager JM, Onishi S, and Diller TE (1992), Heat flux microsensor measurements and calibrations, Proc of 1992 NASA Langley Measurement Tech Conf: Measurement Tech for Aerospace Applications in High-Temperature Environments, NASA CP-3161, 69-80.
103. Thompson MO (1992), At The Edge of Space, The X-I5 Flight Programme, Airlife, London.
104. Thompson RC and Richards WL (1991), Thermal-structural panel buckling tests, NASA Tech Memo 104243.
105. Thornton EA and Paul DP (1985), Thermal-structural analysis of large space structures: An assessment of recent advances, J Spacecraft Rockets 22(4) 385-393.
106. Thornton EA (1992), Thermal structures: Four decades of progress, J Aircraft 29(3) 485-498.
107. Thornton EA and Foster RS (1992), Dynamic response of rapidly heated space structures, Computational Nonlinear Mechanics in Aerospace Engineering, Atluri SN (ed), AIAA Progress in Astronautics and Aeronautics, 1992,451-477.
108. Thornton EA (1993), Thermal buckling of plates and shells, Appl Mech Rev 46(10), 485-506.
109. Thornton EA, Coyle MF, and McLeod RN (1994), Experimental study of plate buckling induced by spatial temperature gradients, J Thermal Stresses 17, 191-212.
110. Thornton EA (1996a), Thermal Structures for Aerospace Applications, AIAA Educ Series, Washington DC.
111. Thornton EA (1996b), Experimental methods for high-temperature aerospace structures, Ch in Thermal Stresses IV, Hetnarski RB (ed), N Holland, Amsterdam.
112. Tobin KW, Allison SW, Cates MR, Capps GJ, Beshears DL, Cyr M, and Noel BW (1990), High-temperature phosphor thermometry of rotating turbine blades, AIAAJ2S(S) 1485-1490.
113. Truitt RW (1960), Fundamentals of Aerodynamic Heating, Ronald Press, New York.
114. Unkel DA (1992), elevated temperature strain gages using resistive strain gages, Ch 5, Strain Gage Users' Handbook, Hannah RL and Reed SE (eds), SEM, Elsevier, London, 175-196.
115. Van Driest ER (1952), Investigation of Laminar Boundary Layer in Compressible Fluids Using the Crocco Method, NASA TN 2597.
116. Van Driest ER (1956), Problem of aerodynamic heating, Aeronaut Eng Rev 15(10)26-41.
117. Vosteen LF and Fuller KE (1955), Behavior of a cantilever plate under rapid-heating conditions, NASA RM L55E20c.
118. Watts JD (1968), Flight experience with shock impingement and interference heating on the X-l 5-2 research airplane, NASA TM X-l 669.
119. Watts JD (1974), NASA YF-12 Flight Loads Program, Symposium held at Flight Research Center, Edwards CA, June 5-6, 1974, NASA TM X-3061, originally classified Confidential, declassified 1991.
120. Whiteside JB, Kamykowski E, Rooney WD, Schulte R, and Stauber M (1994), Effects of 69 months in low earth orbit on kapton antenna structures, J Spacecraft Rockets 31(5) 860-865.
121. Yoler YA (1961), DYNA-SOAR: A review of the technology, Aerospace Eng 20(8), 8-9, 56-67.