A 3D numerical study of ductile tearing and fatigue crack growth under nominal cyclic plasticity

International Journal of Solids and Structures

Volumn 34, Issue 24, 1997, Pages 3141-3161

  Skallerud, B ^a   Zhang, Z L ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; COMPUTER SOFTWARE; FAILURE ANALYSIS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; INTEGRAL EQUATIONS; MATHEMATICAL MODELS; PLASTICITY; PLATES (STRUCTURAL COMPONENTS); SUBROUTINES; THREE DIMENSIONAL;

DUCTILE TEARING; FAILURE CRITERION; MODIFIED GURSON-TVERGAARD MODEL;

CRACK PROPAGATION;

CRACK PROPAGATION; DUCTILE FRACTURE; FATIGUE CRACKS; LOADING; MODELLING-MATHEMATICAL;

EID: 0031208869     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0020-7683(96)00137-0     Document Type: Article

References (44)

1. Barsom, J. M. (1971). Fatigue crack propagation in steels of various strengths. Journal of Engineering in Industry, ASME, 14, 1190.
2. Brocks, W. (1995). Numerical round robin on micromechanical models. Fh-IWM report T8/95.
3. Chell, G. G. (1984). Fatigue crack growth laws for brittle and ductile materials including the effects of static modes and elastic-plastic deformation. Fatigue Fracture Engineering, Materials and Structures 7, 237-250.
4. Chu, C. C. and Needleman, A. (1980). Void nucleation effects in biaxially stretched sheets. Journal of Engineering Materials and Technology 102, 249-256.
5. Dowling, N. E. and Begley, J. A. (1976). Fatigue crack growth during gross plasticity and J-integral. ASTM STP 590, 82-103.
6. Dowling, N. E. (1978). Crack growth during low cycle fatigue of smooth axial specimens. ASTM STP 637, 97-121.
7. Dowling, N. E. and Iyyer, N. S. (1987). Fatigue crack growth and closure at high cyclic strains. Materials Science and Engineering 96, 99-107.
8. Franklin, A. G. (1969). Comparison between a quantitative microscopic and chemical method for assessment on non-metallic inclusions. Journal of the Iron and Steel Institute 207, 181-186.
9. Gurson, A. L. (1977). Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media. Journal of Engineering Materials and Technology 99, 2-15.
10. Hibbitt, Karlson and Sorensen. (1992). ABAQUS Theory manual.
11. Hughes, T. J. R. and Winget, J. (1980). Finite rotation effects in numerical integration of rate constitutive equations arising in large deformation analysis. International Journal of Numerical Methods in Engineering 15, 1862-1867.
12. Hutchinson, J. (1968). Singular behaviour at the end of a tensile crack in a hardening material. Journal of Mechanics and Physics of Solids 16, 13-31.
13. Joyce, J. A., Hackett, E. M. and Roe, C. (1994). Effects of cyclic loading on the deformation and elastic plastic fracture behaviour of a cast stainless steel. ASTM STP 1202 (Edited by Landes, McCabe and Boulet), pp. 722-744.
14. Kaiser, S. (1983). On the relation between stable crack growth and fatigue. Fatigue Fracture Engineering, Materials and Structures 6, 33-49.
15. Koplik, J. and Needleman, A. (1988). Void growth and coalescence in porous plastic solids. International Journal of Solids and Structures 124, 835-853.
16. Laird, C. and Smith, G. C. (1962). Crack propagation in high stress fatigue. Philosophical Magazine 7, 847-857.
17. Lambert, Y., Saillard, P. and Bathias, C. (1988). Application of the J concept to fatigue crack growth in large scale yielding. ASTM STP 969 (Edited by T. A. Cruse), pp. 318-329.
18. Masing, G. (1926). Eigenspannungen und verfestigung beim messing. Proceedings of the 2nd International Congress on Applied Mechanics, Zurich, pp. 332-335.
19. McClung, R. C. and Hudak, S. J. (1994). Surface crack growth in Inconel 718 during large unload-reload cycles. ASTM STP 1202 (Edited by Landes, McCabe and Boulet), pp. 706-721.
20. McEvily, A. J. (1982). On the quantitative analysis of fatigue crack propagation. ASTM STP 811 (Edited by J. Lankford, D. L. Davidson, W. L. Morris and R. P. Wei), pp. 283-312.
21. Neale, B. K. and Priddle, E. K. (1988). On fatigue crack growth and stable tearing. Fatigue Fracture Engineering, Materials and Structures 11, 31-43.
22. Neumann, P. (1974). The geometry of slip processes at a propagating fatigue crack - II. Acta Metallurgica 22, 1167-1178.
23. Paris, P. C. and Erdogan, F. (1963). A critical analysis of crack propagation laws. Journal of Basic Engineering 85, 528-534.
24. Rice, J. (1967). Mechanics of crack tip deformation and extension by fatigue. ASTM STP 415, 247-309.
25. Rice, J. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics 35, 379-386.
26. Rice, J. and Rosengren, G. F. (1968). Plane-strain deformation near a crack tip in a power law hardening material. Journal of Mechanics and Physics of Solids 16, 1-12.
27. Roven, H. J. and Nes, E. (1991). Cyclic deformation of ferritic steel - II, stage II crack propagation. Acta Metallurgica Mater. 39, 1735-1754.
28. Shih, C. F. (1981). Relationships between the J-integral and the crack opening displacement for stationary and opening cracks. Journal of Mechanics and Physics of Solids 29, 305-326.
29. Shih, C. F. and Hutchinson, J. W. (1976). Fully plastic solutions and large scale yielding estimates for plane stress crack problems. Journal of Engineering and Materials Technology 98, 289-295.
30. Skallerud, B. (1992a). On the relationship between low cycle fatigue and crack growth rate properties in welded steel components. Fatigue Fracture Engineering, Materials and Structures 15, 43-56.
31. Skallerud, B. (1992b). Constitutive modelling of cyclic plasticity and some implications for the computation of biaxial low cycle fatigue. Engineering Fracture Mechanics 41, 753-769.
32. Skallerud, B., Amdahl, J., Eide, O. I. and Johansen, A. (1995). On the capacity of tubular T-joints subjected to severe cyclic loading. Proceedings of Offshore Mechanics and Arctic Engineering (OMAE), Copenhagen, Vol. 1B, pp. 133-143.
33. Sun, D. Z., Siegele D., Voss, B. and Schmitt, W. (1989). Application of local damage models to the numerical analysis of ductile rupture. Fatigue Fracture Engineering, Materials and Structures 12, 210-212.
34. Tanaka, K. (1989). Mechanics and micromechanics of fatigue crack propagation. ASTM STP 1020 (edited by R. P. Wei and R. P. Gangloff), pp. 151-183.
35. Thomason, P. F. (1989). Ductile Fracture of Metals. Pergamon Press, London.
36. Tvergaard, V. (1981). Influence of voids on shear band instabilities under plane strain conditions. International Journal of Fracture 17, 389-407.
37. Tvergaard, V. (1982). On localization in ductile materials containing spherical voids. International Journal of Fracture 18, 237-252.
38. Tvergaard, V. and Needleman, A. (1984). Analysis of the cup-cone fracture in a round tensile bar. Acta Metallurgica 32, 157-169.
39. Xia, L. and Shih, C. F. (1995). Ductile crack growth - I. A numerical study using computational cells with microstructurally based length scales. Journal of Mechanics and Physics of Solids 43, 233-259.
40. Yoon, K. B. and Saxena, A. (1991). An interpretation of ΔJ for cyclically unsaturated materials. International Journal of Fracture 49, 3-9.
41. Zhang, Z. L. (1995a). A methodology for determining the Gurson parameters (in preparation).
42. Zhang, Z. L. (1995b). Explicit consistent tangent moduli with a return mapping algorithm for pressure-dependent elastoplasticity models. Computational Methods in Applied Mechanical Engineering 121, 29-44.
43. Zhang, Z. L. and Niemi, E. (1995a). A new failure criterion for the Gurson-Tvergaard dilatational constitutive model. International Journal of Fracture 70, 321-334.
44. Zhang, Z. L. and Niemi, E. (1995b). A class of generalised mid-point algorithms for the Gurson-Tvergaard material model. International Journal of Numerical Methods in Engineering 38, 2033-2053.