Elastic-plastic behavior of textured short-fiber composites

Acta Materialia

Volumn 45, Issue 8, 1997, Pages 3327-3340

  Dunn, M L ^a   Ledbetter, H ^b  

^a UCB 450   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MICROMECHANICS; COMPUTER SIMULATION; ELASTIC MODULI; ELASTICITY; ELASTOPLASTICITY; EXTRUSION; MATHEMATICAL MODELS; PLASTIC FLOW; REINFORCEMENT; STRESSES; TEXTURES; YIELD STRESS;

DISTORTIONAL ENERGY; EFFECTIVE STRESS; ELASTIC PLASTIC RESPONSE; MICROMECHANICS MODEL; SHORT FIBER COMPOSITE; STRESS STRAIN CURVE; YOUNG MODULUS;

FIBER REINFORCED MATERIALS;

EID: 0031198333     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(96)00401-6     Document Type: Article

References (69)

1. Dvorak, G. J., in Metal Matrix Composites, Mechanisms and Properties, ed. R. K. Everett and R. J. Arsenault, Vol. 2. Academic Press, Boston, 1991, pp. 1-77.
2. Dvorak, G. J., ASME J. Engng Mater. Technol., 1993, 115, 2327.
3. Taya, M., Mater. Trans. JIM, 1991, 32, 1.
4. Clyne, T. W. and Withers, P. J., An Introduction to Metal Matrix Composites. Cambridge University Press, Cambridge, 1993.
5. Dutta, I., Sims, J. D. and Seigenthaler, D. M., Acta metall. mater., 1993, 41, 885.
6. Shen, Y.-L., Finot, M., Needleman, A. and Suresh, S., Acta metall. mater., 1995, 43, 1701.
7. Arsenault, R. J. and Taya, M., Acta metall., 1987, 35, 651.
8. Ledbetter, H. and Austin, M., Mater. Sci. Engng, 1987, 89, 53.
9. Taya, M. and Mori, T., Acta metall., 1987, 35, 155.
10. Levy, A. and Papizan, J. M., Metall. Trans., 1990, 21A, 411.
11. Taya, M., Dunn, M. L., Derby, B. and Walker, J., Appl. Mech. Rev., 1990, 43 (5), S294.
12. Taya, M., Lulay, K. E., Wakashima, K. and Lloyd, D. J., Mater. Sci. Engng, 1990, A124, 103.
13. Taya, M., Lulay, K. E. and Lloyd, D. J., Acta metall. mater., 1991, 39, 73.
14. Zahl, D. B. and McMeeking, R. M., Acta metall. mater., 1991, 39, 1117.
15. Povirk, G. L., Stout, M. G., Bourke, M., Goldstone, J. A., Lawson, A. C., Lovato, M., MacEwan, S. R., Nutt, S. R. and Needleman, A., Scripta metall., 1991, 25, 1883.
16. Qiu, Y. P. and Weng, G. J., J. appl. Mech., 1992, 59, 261.
17. Qiu, Y. P. and Weng. G. J., J. appl. Mech., 1995, 62, 1039.
18. Pedersen, O. B., Acta metall., 1983, 31, 1795.
19. Tandon, G. P. and Weng, G. J., J. appl. Mech., 1988, 55, 126.
20. Clegg, W. J., Acta metall., 1988, 36, 2141.
21. Warner, T. J. and Stobbs, W. M., Acta metall., 1989, 37, 2873.
22. Zhu, H. and Zbib, H. M., Int. J. Plasticity, 1995, 11, 471.
23. Hill, R., J. Mech. Phys. Solids, 1965, 13, 89.
24. Hill, R., J. Mech. Phys. Solids, 1967, 15, 79.
25. Hutchinson, J. W., Proc. R. Soc. London, 1970, A319, 247.
26. Budiansky, B. and Wu, T. T., Proc. 4th U.S. National Congress of Applied Mechanics. ASME, New York, pp. 1175-1185.
27. Kröner, E., Acta metall., 1961, 9, 155.
28. Berveiller, M. and Zauoi, A., J. Mech. Phys. Solids, 1979, 26, 325.
29. Eshelby, J. D., Proc. R. Soc. London, 1957, A241, 376.
30. Talbot, D. R. S. and Willis, J. R., IMA J. appl. Mathem., 1985, 35, 39.
31. Willis, J. R., J. Mech. Phys. Solids, 1991, 39, 73.
32. Ponte Castaneda, P., J. Mech. Phys. Solids. 1991, 39, 45.
33. Bao, G., Hutchinson, J. W. and McMeeking, R. M., Acta metall. mater., 1991, 39, 1871.
34. Klipfel, Y. L., He, M. Y., McMeeking, R. M., Evans, A. G. and Mehrabian, R., Acta metall. mater., 1990, 38, 1063.
35. Povirk, G. L., Stout, M. G., Bourke, M., Goldstone, J. A., Lawson, A. C., Lovato, M., MacEwen, S. R., Nutt, S. R. and Needleman, A., Acta metall. mater., 1992, 40, 2391.
36. Tvergaard, V., Acta metall. mater., 1990, 38, 185.
37. Steinkopff, T. and Sautter, M., Computational Mater. Sci., 1995, 4, 10 and 15.
38. Takao, Y., Chou, T. W. and Taya, M., J. appl. Mech., 1982, 49, 536.
39. Ferrari, M. and Johnson, G. C., Mech. Mater., 1989, 8, 67.
40. Ferrari, M., Mech. Mater., 1991, 11, 251.
41. Ferrari, M., Compos. Engng, 1994, 4, 37.
42. Marzari, N. and Ferrari, M., J. appl. Mech., 1992, 59, 269.
43. Sayers, C. M., Int. J. Solids Struct., 1992, 29, 2933.
44. Dunn, M. L., Ledbetter, H., Heyliger, P. R. and Choi, C. S., J. Mech. Phys. Solids, 1996, 44, 1509.
45. Mori, T. and Tanaka, K., Acta metall., 1973, 21, 571.
46. Takao, Y. and Taya, M., J. Compos. Mater., 1982, 21, 140.
47. Bunge, H., Texture Analysis in Materials Science. Butterworths, London, 1982.
48. Ferrari, M. and Marzari, N., J. Energy Res. Tech., 1992, 144, 101.
49. Banerjee, P. K. and Henry, D. P., Int. J. Solids Struct., 1992, 29, 2423.
50. Papathanasiou, T. D., Ingber, M. S., Mondy, L. A. and Graham, A. L., J. Compos. Mater., 1994, 28, 288.
51. Roe, R. J., J. appl. Phys., 1965, 36, 2024.
52. Qiu, Y. P. and Weng, G. J., Int. J. Solids Struct., 1991, 27, 1537.
53. Tszeng, T. C., Compos. Sci. Technol., 1994, 51, 75.
54. Sorensen, N. J., Suresh, S., Tvergaard, V. and Needleman, A., Mater. Sci. Engng, 1995, A197, 1.
55. Allen, A. J., Bourke, M., Dawes, S., Hutchings, M. T. and Withers, P. J., Acta metall. mater., 1992, 40, 2361.
56. Mura, T., Micromechanics of Defects in Solids, 2nd edn. Martinus Nijhoff Publisher, Amsterdam, 1987.
57. Benveniste, Y., Mech. Mater., 1987, 6, 147.
58. Zhao, Y. H. and Weng, G. J., in Micromechanics and Inhomogeneity, The Toshio Mura Anniversary Volume, ed. G. J. Weng, M. Taya and H. Abe. Springer, Berlin, 1990, pp. 599-622.
59. Budiansky, B., J. appl. Mech., 1959, 26, 259.
60. Bhattacharyya, A. and Weng, G. J., Appl. Mech. Rev., 1994, 47, S45.
61. Schreiber, E., Anderson, O. and Soga, N., Elastic Constants and Their Measurement. McGraw-Hill, New York, 1973.
62. Ohno, I., J. Phys. Earth, 1976, 24, 355.
63. Heyliger, P., Ledbetter, H. and Austin, M., in Dynamic Elastic Modulus Measurements in Materials, ed. A. Wolfenden. ASTM STP 1045, 1989, pp. 100-109.
64. Heyliger, P., Jilani, A., Ledbetter, H., Leisure, R. G. and Wang, C. L., J. Acoustical Soc. Am., 1993, 94, 1482.
65. Migliori, A., Visscher, W. M., Brown, S. E., Fisk, Z., Cheong, S.-W., Alten, B., Ahrens, E. T., Kubat-Martin, K. A., Maynard, J. D., Huang, Y., Kirk, D. R., Gillis, K. A., Kim, H. K. and Chan, M. H. W., Phys. Rev. B, 1990, 41, 2098.
66. Ledbetter, H., Fortunko, C. and Heyliger, P., J. appl. Phys., 1995, 78, 1542.
67. Barrett, C. S. and Massalski, T. B., Structure of Metals. McGraw-Hill, New York, 1966.
68. Miller, W. S. and Humphreys, F. J., in Fundamental Relationships Between Microstructure and Mechanical Properties of Metal-Matrix Composites, ed. P. K. Liaw and M. N. Gungor. TMS, Warrendale, PA, 1990, pp. 517-541.
69. Morris, P. R., J. appl. Phys., 1969, 40, 447.