Tribological behaviour of ion-implanted Ti6A14V sliding against polymers

Wear

Volumn 209, Issue 1-2, 1997, Pages 49-56

  Schmidt, Herald ^a   Schminke, Andreas ^a   Rück, Dorothee M ^b  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^b GSI HELMHOLTZZENTRUM FÜR SCHWERIONENFORSCHUNG GMBH   (Germany)

Author keywords

Backscattering spectrometry; Ion implantation; Joint prostheses; Titanium

Indexed keywords

CONTACT-SLIDING; ION IMPLANTATION; POLYMERS; TITANIUM ALLOYS; WEAR;

ATOMS; CARBON; FRICTION; HARDNESS; ION IMPLANTATION; NITROGEN; POLYMERS; SURFACES; TITANIUM ALLOYS; WEAR OF MATERIALS; WEAR RESISTANCE;

OXIDE PARTICLE REMOVAL; WEAR TESTING;

TRIBOLOGY;

EID: 0031195592     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07456-X     Document Type: Article

References (35)

1. R. Van Noort, Titanium: the implant material of today, J. Mater. Sci., 22 (1987) 3801-3811.
2. M. Semlitsch, Titanium alloys for hip joint replacements, Clin. Maier., 2 (1987) 1-13.
3. H.-G. Willert, G.H. Buchhom and P. Eyerer, Ultra-High Molecular Weight Polyethylene as Biomaterial in Orthopedic Surgery, Hofgrebe and Huber, Toronto, 1991.
4. S. Nasser, P.A. Campbell, D. Kilgus, N. Kossovsky and H.C. Amstutz, Cementless total joint arthroplasty prostheses with titanium-alloy articular surfaces, Clin. Orthop., 261 (1990) 171-185.
5. H.J. Agins, N.W. Alcock, M. Bansal, E.A. Salvati, P.D. Wilson, P.M. Pellicci and P.G. Bullough, Metallic wear in failed titanium-alloy total hip replacements, J. Bone Joint Surg., 70-A (1988) 347-356.
6. A.V. Lombardi, T.H. Mallory, B.K. Vaughn and P. Drouillard, Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads, J. Bone Joint Surg., 71-A (1989) 1337-1342.
7. R.A. Poggie, A.K. Mishra and J.A. Davidson, Three-body abrasive wear behaviour of orthopaedic implant bearing surfaces from titanium debris, J. Mater. Sci. Mater. Med., 5 (1994) 387-392.
8. P. Sioshansi, R.W. Oliver and F.D. Matthews, Wear improvement of surgical titanium alloys by ion implantation, J. Vac. Sci. Technol., A3 (1985) 2670-2674.
9. F.D. Matthews, K.W. Greer and D.L. Armstrong, The effect of nitrogen ion implantation on the abrasive wear resistance of the Ti-6A1-4V/ UHMWPE couple, in J.M. Williams, M.F. Nichols and W. Zingg (Eds.), Mat. Res. Soc. Symp. Proc. Vol. 55, Materials Research Society, Pittsburgh, 1986, pp. 243-252.
10. Z. Jianqiang, Z. Xiaozhong, G. Zintang and L. Hengde, Comparison of wear resistance of ion implanted surgical Ti-6A1-4V with other alloys, in J.M. Williams, M.F. Nichols and W. Zingg (Eds.), Mat. Res. Soc. Symp. Proc. Vol. 55, Materials Research Society, Pittsburgh, 1986, pp. 229-235.
11. J. Rieu, A. Pichat, L.M. Rabbe, A. Rambert, C. Chabrol and M. Robelet, Structural modifications induced by ion implantation in metals and polymers used for orthopaedic prostheses, Mater. Sci. Technol., 8 (1992) 589-593.
12. F. Alonso, A. Arizaga, S. Quainton, J.J. Ugarte, J.L. Vivente and J.I. Onate, Mechanical properties and structure of Ti-6A1-4V alloy implanted with different light ions, Surf. Coat. Technol. 74-75 (1995) 986-992.
13. H. Schmidt, H.E. Exner, D.M. Rück, N. Angert and U. Fink, Wear behaviour of ion implanted Ti6A14V against UHMWPE, in R. Kossowsky and N. Kossovsky (Eds.), Advances in Materials Science and Implant Orthopedic Surgery, Kluwer, Dordrecht, 1995, pp. 207-221.
14. R. Martinella, S. Giovanardi and G. Palombarini, Wear of ultrahigh molecular weight polyethylene sliding against surface-treated Ti6A14V, AISI 316 stainless steel and Vitallium, Wear, 133 (1989) 267-279.
15. M. Corchia, R. Giorgi, S. Turm, F. Caccavale, S. LoRusso, P. Mazzoldi, G. Abatangelo, R. Cortivo, S. Giovanardi, R. Martinella, A. McCabe, D. Chivers and P. Tweedale, Wear behaviour improvement of the couple Ti6A14V-UHMWPE by ion implantation, Abstr. 11th Eur: Conf. on Biomaterials, Pisa, 1994, pp. 368-371.
16. J. Lausmaa, T. Röstlund and H. McKellop, Wear of ion implanted pure titanium and Ti6A14V alloy against ultrahigh molecular weight polyethylene, Surf. Eng., 7 (1991) 311-317.
17. A.K. Mishra and J.A. Davidson, PMMA abrasion resistance of zirconia, TiN and ADLC surfaces, Trans. 4th World Biomat. Cong., Berlin, 1992, p. 116.
18. R.M. Streicher, H. Weber, R. Schön and M. Semlitsch, New surface modification for Ti-6AI-7Nb alloy: oxygen diffusion hardening (ODH), Biomaterials, 12 (1991) 125-129.
19. D.M. Rück, N. Angert, H. Emig, K.D. Leible, P. Spädtke, D. Vogt and B.H. Wolf, Ion implantation facilities at GSI, Nucl. Tracs Radiat. Meas., 19 (1991) 951-954.
20. P. Sioshansi, Surface modification of industrial components by ion implantation, Mater, Sci. Eng., 90 (1987) 373-383.
21. J.A. Leavitt, L.C. McIntyre and M.R. Weller, Backscattering spectrometry, in J.R. Tesmer and M. Nastasi (Eds.), Handbook of Modern Ion Beam Materials Analysis, Materials Research Society, Pittsburgh, 1995, pp. 37-81.
22. L.R. Doolittle, High energy backscattering analysis using RUMP, in J.R. Tesmer, C.J. Maggiore, M. Nastasi, J.C. Barbour and J. W. Mayer (Eds.), High Energy and Heavy Ion Beams in Materials Analysis, Materials Research Society, Pittsburgh, 1990, pp. 175-182.
23. 4He from carbon, Nucl. Instr. Meth., 556 (1994) 225-230.
24. 16O elastic scattering resonance at 7.30-7.65 MeV and applications to oxygen depth profiling, Nucl. Instr. Meth., B82 (1993) 393-398.
25. W. Weiler, Hardness testing - a new method for economical and physically meaningful microhardness testing, Brit. J. Non Destr. Test., 31 (1989) 252-258.
26. J. Hinterberger, M. Ungethüm and W. Plitz, Tribological properties of aluminium oxide ceramics, in G.W, Hastings and D.F. Williams (Eds.), Mechanical Properties of Biomaterials, Wiley, Chichester, 1980, pp. 73-82.
27. A. Walter and W. Plitz, The ring-on-disc method - clinical significance of a wear-screening test of biomaterials for hip joint alloplasty, in S.M. Perren and E. Schneider (Eds.), Biomechanics: Current Interdisciplinary Research, Martinus Nijoff, Dordrecht, 1985, pp. 129-134.
28. R.N. Bolster, I.L. Singer and R.G. Vardiman, Composition, structure and wear resistance of Ti-6A1-4V implanted with carbon or boron to high doses, Surf. Coat. Technol, 33 (1987) 469-477.
29. X. Qiu, R.A. Dodd, J.R. Conrad, A. Chen and F.J. Worzala, Microstructural study of nitrogen-implanted Ti-6A1-4V alloy, Nucl. Instr. Meth., B59/60 (1991) 951-956.
30. R. Martinella, S. Giovanardi, G. Chevallard, M. Villani, A. Molinari and C. Tosello, Wear behaviour of nitrogen-implanted and nitrided Ti-6A14V alloy, Mater. Sci. Eng., 69 (1985) 247-252.
31. R.G. Vardiman and R.A. Kant, The improvement of fatigue life inTi-6A1-4V by ion implantation, J. Appl. Phys., 53 (1982) 690-694.
32. R. Hutchings, The subsurface microstructure of nitrogen-implanted metals, Mater. Sci. Eng., 69 (1985) 129-138.
33. D.M. Rück, H. Schmidt, N. Angert, O. Yoda, Y. Aoki and H. Naramoto, Characterization of a hafnium and nitrogen implanted titanium alloy, in J.S. Williams, R.G. Elliman and M.C. Ridgway (Eds.), Ion Beam Modification of Materials, Elsevier, Amsterdam, 1996, pp. 1016-1019.
34. T.B. Massalski, Binary Alloy Phase Diagrams, ASM, Metals Park, 1986.
35. N.D. Tomashov, M.I. Guseva, G.A. Fedoseeva, A.E. Gorodetskil, A.P. Zakharov, D.B. Bogomolov, G.P. Chernova, B.G. Vladimirov and S.M. Ivanov, Improving the corrosion resistance of titanium by palladium-ion implantation, Sov. Phys. Dokl, 26 (1981) 222-224.