Three-dimensional analytical temperature field and its application to solidification characteristics in high-or low-power-density-beam welding

International Journal of Heat and Mass Transfer

Volumn 40, Issue 10, 1997, Pages 2283-2292

  Wei, P S ^a   Ho, C Y ^a   Shian, M D ^a   Hu, C L ^a  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE DIFFERENCE METHOD; FUSION REACTIONS; HEAT AFFECTED ZONE; HEAT CONVECTION; HEAT FLUX; MORPHOLOGY; SOLIDIFICATION; TEMPERATURE; THREE DIMENSIONAL;

MORPHOLOGICAL STABILITY; PECLET NUMBER; PREHEATING TEMPERATURE; THREE DIMENSIONAL ANALYTICAL TEMPERATURE FIELD; WELDING CAVITY;

LASER BEAM WELDING;

SOLIDIFICATION; TEMPERATURE; WELDING;

EID: 0031195202     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0017-9310(96)00314-6     Document Type: Article

References (46)

1. Davies, G. J. and Garland, J. G., Solidification structures and properties of fusion welds. International Metallurgical Reviews, 1975, 20, 83-106.
2. David, S. A., and Vitek, J. M., Correlation between solidification parameters and weld microstructures. International Materials Review, 1989, 34, 213-245.
3. Calvo, F. A. C., Bentley, K. P. and Baker, R. G., Growth substructures in weld metal. Acta Metallica, 1960, 8, 898-900.
4. Rutter, J. W. and Chalmers, B., A prismatic substructure formed during solidification of metals. Canadian Journal of Physics, 1953, 31, 15-39.
5. Savage, W. F., Lundin, C. D. and Aronson, A. H., Weld metal solidification mechanics. Welding Journal, 1965, 44, 175-s-181-s.
6. Matsuda, F., Hashimoto, T. and Senda, T., Fundamental investigations on solidification structure in weld metal. Transactions of National Research Institute for Metals, 1969, 11, 43-58.
7. Kato, M., Matsuda, F. and Senda, T., Solidification mode in aluminum weld metal. Transactions of the Japan Welding Society, 1972, 3, 69-76.
8. Brown, P. E. and Adams, Jr, C. M., Fusion-zone structures and properties in aluminum alloys. Welding Journal, 1960, 39, 520-s-524-s.
9. Brown, P. E. and Adams, Jr, C. M., Rapidly solidified alloys structures. Transactions of AFS, 1961, 69, 879-891.
10. Jordan, M. F. and Coleman, M. C., Fused zone structures in arc welded deposits of a commercial Al-Mg-Mn alloy. British Welding Journal, 1968, 15, 553-558.
11. Lanzafame, J. N. and Kattamis, T. Z., Solidification structure and tensile properties of 2014 aluminum alloy welds. Welding Journal, 1973, 52, 226-s-232-s.
12. Katayama, S. and Matsunawa, A., Solidification behaviour and microstructural characteristics of pulsed and continuous laser welded stainles steels. In Laser Welding, Machining and Materials Processing. Proceedings of the International Conference on Applications of Lasers and Electro-optics ICALEO'85, ed. C. Albright, 11-14 November, 1985, San Francisco, pp. 19-25.
13. Kou, S., Hsu, S. C. and Mehrabian, R., Rapid melting and solidification of a surface due to a moving heat flux. Metallurgical Transactions, 1981, 12B, 33-45.
14. Rosenthal, D., Mathematical theory of heat distribution during welding and cutting. Welding Journal, 1941, 20, 220-5-234-s.
15. Wei, P. S. and Shian, M. D., Three-dimensional analytical temperature field around the welding cavity produced by a moving distributed high-intensity beam. ASME Journal of Heat Transfer, 1993, 115, 848-856.
16. Ol'shanskii, N. A., Movement of molten metal during electron-beam welding. Svarochnoe Proizvodstvo, 1974, 9, 12-14.
17. Dowden, J., Davis, M. and Kapadia, P., Some aspects of the fluid dynamics of laser welding. Journal of Fluid Mechanics, 1983, 126, 123-146.
18. Wei, P. S. and Giedt, W. H., Surface tension gradient-driven flow around an electron beam welding cavity. Welding Journal, 1985, 64, 251-s-259-s.
19. Hsu, Y. F. and Rubinsky, B., Two-dimensional heat transfer study on the keyhole plasma arc welding process. International Journal of Heat and Mass Transfer, 1988, 31, 1409-1421.
20. Hicken, G. K., Giedt, W. H. and Bentley, A. E., Correlation of joint penetration with electron beam current distribution. Welding Journal, 1991, 70, 69-s-75-s.
21. Nippes, E. F. (coordinator). Metals Handbook, 9th edn, Vol. 6. ASM, Metals Park, OH, 1983.
22. Wang, S. C. and Wei, P. S., Energy-beam redistribution and absorption in a drilling or welding cavity. Metallurgical Transactions, 1992, 23B, 505-511.
23. Ho, C. Y., Heat transfer in electron-beam welding. Ph.D. thesis, Institute of Mechanical Engineering, National Sun Yat-Sen University, Taiwan, China, 1996.
24. Wei, P. S., Wu, T. H. and Chow, Y. T., Investigation of high-intensity beam characteristics on welding cavity shape and temperature distribution. ASME Journal of Heat Transfer, 1990, 112, 163-169.
25. Schauer, D. A., Giedt, W. H. and Shintaku, S. M., Electron beam welding cavity temperature distributions in pure metals and alloys. Welding Journal, 1978, 57, 127-s-133-s.
26. Kristensen, J. K., Hansson, L. H. and Smidth, F. L., Key-hole formation, temperature distribution and thermal cycle in electron beam welding. In Electron and Laser Beam Welding. Proceedings of the International Conference, Tokyo, 14-15 July 1986, pp. 119-129.
27. Wei, P. S. and Chow, Y. T., Beam focusing characteristics and alloying element effects on high-intensity electron beam welding. Metallurgical Transactions, 1992, 23B, 81-90.
28. Kaplan, A., A model of deep penetration laser welding based on calculation of the keyhole profile. Journal of Physics D: Applied Physics, 1994, 27, 1805-1814.
29. 2 laser. Journal of Applied Physics, 1993, 74, 5773-5780.
30. Collur, M. M. and DebRoy, T., Emission spectroscopy of plasma during laser welding of AISI 201 stainless steel. Metallurgical Transactions, 1989, 20B, 277-286.
31. Zel'dovich, Ya. B. and Raizer, Yu. P., Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena, Chapter V, Vol. 1. Academic Press, New York, 1966.
32. Shui, V. H., Kivel, B. and Weyl, G. M., Effect of vapor plasma on the coupling of laser radiation with aluminum targets. Journal of Quantitative Spectroscopy and Radiative Transfer, 1978, 20, 627-636.
33. Matsunawa, A. 61nd Ohnawa, T., Beam-plume interaction in laser materials processing. Transactions of Japan Welding Research Institute, 1991, 20, 9-15.
34. Dowden, J., Kapadia, P. and Postacioglu, N., An analysis of the laser-plasma interaction in laser keyhole welding. Journal of Physics D: Applied Phvsics, 1989, 22, 741-749.
35. Tix, C. and Simon, G., A transport theoretical model of the keyhole plasma in penetration laser welding. Journal of Physics D : Applied Physics, 1993, 26, 2066-2074.
36. Duley, W. W., A comparison of keyhole absorption processes in laser and electron beam welding. In Proceedings of the Conference on the Laser vs the Electron Beam in Welding, Cutting and Surface Treatment - State of the Art - 1987, ed. R. Bakish, Bakish Materials Corp., Englewood, N.J., 1987, pp. 160-167.
37. Wei, P. S. and Ho, J. Y., Energy considerations in high-energy beam drilling. International Journal of Heat and Mass Transfer, 1990, 33, 2207-2217.
38. Wei, P. S. and Chiou, L. R., Molten metal flow around the base of a cavity during a high-energy beam penetrating process. ASME Journal of Heat Transfer, 1988, 110, 918-923.
39. Gau, C. and Viskanta, R., Melting and solidification of a metal system in a rectangular cavity. International Journal of Heat and Mass Transfer, 1984, 27, 113-123.
40. Giedt, W. H., Wei, X.-C. and Wei, S.-R., Effect of surface convection on stationary GTA weld zone temperatures. Welding Journal, 1984, 63, 376-s-383-s.
41. Gradshteyn, I. S. and Ryzhik, I. M., Table of Integrals, Series and Products, ed. A. Jeffrey. Translated from the Russian by Scripta Technica, Inc., England, 1980, pp. 482 and 847.
42. Tiller, W. A., Jackson, K. A., Rutter, J. W. and Chalmers, B., The redistribution of solute atoms during the solidification of metals. Acta Metallica, 1953, 1, 428-437.
43. Flemings, M. C., Solidification Processing, Chapter 3. McGraw-Hill, New York, 1974.
44. Elmer, J. W., Allen, S. M. and Eagar, T. W., Microstructural development during solidification of stainless steel alloys. Metallurgical Translations, 1989, 20A, 2117-2131.
45. Adams, Jr, C. M., Cooling rates and peak temperatures in fusion welding. Welding Journal, 1958, 37, 210-s-215-s.
46. Tewari, S. N. and Laxmanan, V., Cellular-dendritic transition in directionally solidified binary alloys. Metallurgical Transactions, 1987, 18A, 167-170.