Homogenization-based analysis and design of composites

Computers and Structures

Volumn 64, Issue 1-4, 1997, Pages 603-621

  Swan, C C ^a   Kosaka, I ^a  

^a IA United States   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE ELEMENT METHOD; TOPOLOGY;

HOMOGENIZATION ANALYSIS; INELASTIC COMPOSITES;

COMPOSITE MICROMECHANICS;

EID: 0031186443     PISSN: 00457949     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7949(96)00158-7     Document Type: Article

References (66)

1. M. A. Da, N. Kikuchi, H.-C. Cheng and I. Hagiwara, Topology and shape optimization for structural dynamic problems. ASME-PVP 248, 133-143 (1992).
2. E. Hinton and J. Sienz, Aspects of adaptive finite element analysis and structural optimization. In: Advances in Structural Optimization, pp. 1-25. Civil-Comp Press, Edinburgh (1994).
3. N. Kikuchi and K. Suzuki, Structural optimization of a linearly elastic structure using the homogenization method. In: Composite Media and Homogenization Theory, pp. 183-203. Springer, Berlin (1991).
4. H. P. Mlejnek and R. Schirrmacher, An engineer's approach to optimal material distribution and shape finding. Comput. Meth. appl. Mech. Engng 106, 1-26 (1993).
5. G. I. N. Rozvany, Structural Design via Optimality Criteria: the Prager Approach to Structural Optimization. Kluwer Academic, Dordrecht (1989).
6. E. Sandgren, E. Jensen and J. W. Welton, Topological design of structural components using genetic optimization methods. In: Sensitivity Analysis and Optimization with Numerical Methods, ASME-AMD 115, pp. 31-43. ASME, New York (1990).
7. K. Suzuki and N. Kikuchi, Shape and topology optimization by a homogenization method. ASME-AMD 115, pp. 15-30. ASME, New York (1990).
8. E. Ramm, K.-U. Bletzinger, R. Reitinger and K. Maute, The challenge of structural optimization. In: Advances in Structural Optimization, pp. 27-52. Civil-Comp Press, Edinburgh (1994).
9. B. H. V. Topping and M. Papadrakakis (Eds), Advances in Structural Optimization. Civil-Comp Press, Edinburgh (1994).
10. R. S. Lakes, Materials with structural hierarchy. Nature 361, 511-515 (1993).
11. O. O. Storaasli, D. T. Nguyen and T. K. Agarwal, Parallel-vector solution of large-scale structural analysis problems on supercomputers. AIAA J. 28, 1211-1216 (1990).
12. O. O. Storaasli, D. T. Nguyen and T. K. Agarwal, A parallel-vector algorithm for rapid structural analysis on high-performance computers. NASA Technical Memo 102614, Hampton, VA (1990).
13. R. Johanson, J. Fonseca, N. Kikuchi and P. Papalambros, Structural design for freeform fabrication using composite materials. In: Proc. of the Solid Freeform Fabrication Symp., Austin, TX (1994).
14. R. Johanson, N. Kikuchi and P. Papalambros, Simultaneous topology and material microstructure design. In: Advances in Structural Optimization, pp. 143-150. Civil-Comp Press, Edinburgh (1994).
15. O. Sigmund, Design of material structures using topology optimization. Report S 69, Danish Center for Applied Mathematics and Mechanics, Technical University of Denmark, Lyngby (1994).
16. D. A. Saravanos and C. C. Chamis, Integrated mechanics for the passive damping of polymer matrix composites and composite structures. In: M3D: Mechanics and Mechanisms of Material Damping, ASTM Special Technical Publication, no. 1169, Philadelphia, PA, no. pp. 471-489 (1992).
17. C. Rabzak, D. Saravanos and C. C. Chamis, Optimal synthesis of hot composite laminates with interphase layers. NASA-TM-106326, NASA Lewis Research Center, Cleveland, OH (1993).
18. C. C. Chamis, P. L. N. Murthy and S. N. Singhal, Computational simulation of hot composite structures. NASA-TM-106200, NASA Lewis Research Center, Cleveland, OH (1993).
19. M. P. Bendsoe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method. Comput. Meth. appl. Mech. Engng 71, 197-224 (1988).
20. C. C. Swan and A. S. Cakmak, A hardening orthotropic plasticity model for non-frictional composites: rate formulation and integration algorithm. Int. J. numer. Meth. Engng 28, 839-860 (1994).
21. C. C. Swan and A. S. Cakmak, Nonlinear quasi-static and seismic analysis of the Hagia Sophia using an effective medium approach. Soil Dyn. Earthq. Engng 12, 259-271 (1993).
22. A. Bensouan, J.-L. Lions and G. Papanicolaou, Asymptotic analysis for periodic structures. North-Holland, Amsterdam (1978).
23. J. C. Michel and P. M. Suquet, On the strength of composite materials: variational bounds and computational aspects. In: Topology Design of Structures (Edited by M. P. Bendsoe and C. A. Mota Soares), pp. 355-374. Kluwer Academic, Dordrecht (1993).
24. P. Ponte Castañeda, The effective mechanical properties of nonlinear isotropic composites. J. Mech. Phys. Solids 39, 45-71 (1991).
25. J. R. Willis, On methods for bounding the overall properties of nonlinear composites. J. Mech. Phys. Solids 39, 73-86 (1991).
26. L. V. Gibiansky and S. Torquato, Link between the conductivity and elastic moduli of composite material. Phys. Rev. Lett. 71, 2927-2930 (1993).
27. C. A. Miller and S. Torquato, Improved bounds on elastic and transport properties of fiber-reinforced composites: effect of polydispersivity in fiber radius. J. appl. Phys. 69, 1948-1955 (1991).
28. G. Milton, On characterizing the set of possible effective tensors of composites: the variational method and the translational method. Commun. pure appl. Math. 43, 63-125 (1990).
29. G. W. Milton, Composite materials with Poisson's ratios close to -1. J. Mech. Phys. Solids 40, 1105-1137 (1992).
30. V. Nesi and G. W. Milton, Polycrystalline configurations that maximize electrical resistivity. J. Mech. Phys. Solids 39, 525-542 (1991).
31. J. W. Ju and T. M. Chen, Micromechanics and effective moduli of elastic composites with randomly dispersed inhomogeneities. In: Macroscopic Behavior of Heterogeneous Materials from the Microstructure, Vol. AMD 147, pp. 95-109. ASME, New York (1993).
32. P. V. McLaughlin and S. C. Batterman, Limit behavior of fibrous materials. Int. J. Solids Struct. 6, 1357-1376 (1970).
33. P. V. McLaughlin, Plastic limit behavior and failure of filament reinforced materials. Int. J. Solids Struct. 8, 1299-1318 (1972).
34. A. Dasgupta and R. K. Agarwal, Orthotropic thermal conductivity of plain-weave fabric composites using a homogenization technique. J. Compos. Mater. 26, 2736-2758 (1992).
35. Y. Yi and S.-Y. Luo, Modeling of plain weave fabric composite under finite deformation, Vol. PVP 248 and NE 10, pp. 41-48. ASME, New York (1992).
36. T. Dutta, T. K. Ballabh and T. R. Middya, Green function calculation of effective elastic constants of textured polycrystalline materials. J. Phys. D: appl. Phys. 26, 667-675 (1993).
37. J. Aboudi, Mechanics of Composite Materials: a Unified Micromechanical Approach, Chap. 9. Elsevier, New York (1991).
38. C. C. Swan, Techniques for stress and strain controlled homogenization of inelastic periodic composites. Comput. Meth. appl. Mech. Engng 117, 249-267 (1994).
39. C. C. Swan and A. S. Cakmak, Homogenization and effective elastoplasticity models for periodic composites. Commun. numer. Meth. Engng 10, 257-265 (1994).
40. P. Pegon and A. Anthoine, Numerical strategies for solving continuum damage mechanics problems involving softening: application to the homogenization of masonry. In: Advances in Non-linear Finite Element Methods, pp. 143-158. Civil-Comp Press, Edinburgh (1994).
41. J. M. Guedes, Effective properties for non-linear composite materials: computational aspects. In: Topology Design of Structures (Edited by M. P. Bendsoe and C. A. Mota Soares), pp. 375-394. Kluwer Academic, Dordrecht (1993).
42. P. M. Suquet, Approach by homogenization of some linear and nonlinear problems in solid mechanics. In: Plastic Behavior of Anisotropic Solids, Proc. of the CNRS Int. Colloq. 319 (Edited by J. P. Boehler). CNRS, Paris (1985).
43. P. M. Suquet, Local and global aspects in the mathematical theory of plasticity. In: Plasticity Today: Modelling Methods and Applications (Edited by A. Sawczuk and G. Bianchini), pp. 279-310. Elsevier, Oxford (1985).
44. P. M. Suquet, Elements of homogenization for inelastic solid mechanics. In: Homogenization Techniques for Composite Media (Edited by E. Sanchez-Palencia and A. Zaoui), pp. 193-278. Springer, Berlin (1987).
45. C. Farhat, A Lagrange multiplier based divide and conquer finite element algorithm. Comput. Syst. Engng 31, 149-156 (1991).
46. C. Farhat and F. X. Roux, A method of finite element tearing and interconnecting and its parallel solution algorithm. Int. J. numer. Meth. Engng 32, 1205-1227 (1991).
47. E. L. Poole, N. F. Knight and D. D. Davis, High-performance equation solvers and their impact on finite element analysis. Int. J. Numer. Meth. Engng 33, 855-868 (1992).
48. M. Geradin and M. Hogge, Solving systems of nonlinear equations. In: The Finite Element Handbook (Edited by H. Kardes-Tuncer). McGraw-Hill, New York (1987).
49. T. J. R. Hughes, R. M. Fenencz and J. O. Hallquist, Large-scale vectorized implicit calculations in solid mechanics on a Cray X-MP/48 utilizing EBE preconditioned conjugate gradients. Comput. Meth. appl. Mech. Engng 61, 215-248 (1987).
50. M. J. D. Powell, Some convergence properties for the conjugate gradient method. Math. Progm. 11, 42-49 (1976).
51. G. H. Golub and C. F. Van Loan, Matrix Computations. Johns Hopkins University Press, Baltimore, MD (1983).
52. D. F. Shanno, Conjugate gradient methods with inexact searches. Math. Ops Res. 3, 244-256 (1978).
53. D. G. Luenberger, Linear and Nonlinear Programming. Addison-Wesley, Reading (1984).
54. H. Matthies and G. Strang, The solution of nonlinear finite element equations. Int. J. numer. Meth. Engng 14, 1613-1626 (1979).
55. CF77 Compiling System, Vol. 3: Vectorization guide SG-3073.50. Cray Research, Mendota Heights, MN (1991).
56. CF77 Compiling System, Vol. 4: Parallel Processing Guide, SG-3074.50. Cray Research, Mendota Heights, MN (1991).
57. J. C. Simo, J. Kennedy and S. Govindjee, Non-smooth multisurface viscoplasticity. Loading/unloading conditions and numerical algorithms. Int. J. numer. Meth. Engng 26, 2161-2185 (1988).
58. G. Penelis, Analysis of the Rotunda of Thessaloniki. In: Hagia Sophia: from the Age of Justinian to the Present (Edited by R. Mark and A. S. Cakmak). Cambridge University Press, Cambridge (1992).
59. T. J. R. Hughes, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. Prentice-Hall, Englewood Cliffs, NJ (1987).
60. S. W. Sloan, A Fortran program for profile and wavefront reduction. Int. J. numer. Meth. Engng 28, 2651-2679 (1989).
61. G. Strang and R. V. Kohn, Optimal design in elasticity and plasticity. Int. J. numer. Meth. Engng 22, 183-188 (1986).
62. C. C. Swan and I. Kosaka, Revss and Voigt Mixing Rules for variable topology material layout: part 2: structures with nonlinear materials (in press).
63. C. C. Swan and J. S. Arora, Topology design of material layout in structured composites of high stiffness and strength. Struct. Optim. (1996) (in press).
64. J. S. Arora and J. B. Cardosa, Variational principle for shape design sensitivity analysis. AIAA J. 30, 538-547 (1992).
65. C. C. Swan, FENDAC Users Manual and Methods Documentation. University of Iowa, Iowa City, IA (1993).
66. J. S. Arora, T. Lin, O. Elwakeil and M. Wang, IDESIGN Users' Manual Version 4.2. University of Iowa, Iowa City, IA (1994).