The thermomechanical processing of alpha/beta titanium alloys

JOM

Volumn 49, Issue 6, 1997, Pages 33-39

  Semiatin, S L ^a,b,c   Seetharaman, V ^c,d,e   Weiss, I ^c,f,g  

^a CARNEGIE MELLON UNIVERSITY   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c TMS   (United States)

^d INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

^e UES   (United States)

^f MCGILL UNIVERSITY   (Canada)

^g WRIGHT STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; HOT WORKING; INGOTS; MELTING; METALLOGRAPHIC MICROSTRUCTURE; METALLURGY; TEXTURES; THERMOMECHANICAL TREATMENT; VACUUM APPLICATIONS;

ALPHA BETA TITANIUM ALLOYS; ALPHA PHASE FIELD; BETA PHASE FIELD; CAVITATION WEDGE CRACKING; HOT WORKABILITY; INGOT METALLURGY APPROACH; LAMELLAR MICROSTRUCTURE; THERMOMECHANICAL PROCESSING; VACUUM ARC MELTING;

TITANIUM ALLOYS;

EID: 0031161865     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/bf02914711     Document Type: Review

References (58)

1. E.W. Collings, The Physical Metallurgy of Titanium Alloys (Materials Park, OH: ASM, 1984).
2. A. Choudhury and E. Weingartner, Metals Handbook, volume 15 (Materials Park, OH: ASM, 1988), pp. 406-408.
3. F.H. Froes, D. Eylon, and H.B. Bomberger, Lesson 8, Titanium and Its Alloys (Materials Park, OH: Materials Engineering Institute, 1994).
4. H. Hayakawa et al., Titanium '92: Science and Technology, ed. F.H. Froes and I.L. Caplan (Warrendale, PA: TMS, 1993), pp. 2317-2324.
5. J.S. Myers, Lesson 9, Titanium and Its Alloys (Materials Park, OH: Materials Engineering Institute, 1994).
6. S.L. Semiatin, J.F. Thomas, Jr., and P. Dadras, Metall. Trans. A, 14A (1983), pp. 2363-2374.
7. J.G. Malcor, F. Montheillet, and B. Champin, Titanium: Science and Technology, ed. G. Luetjering, U. Zwicker, and W. Bunk (Oberursel, Germany: DGM, 1985), pp. 1495-1502.
8. E. Rauch, G.R. Canova, and J.J. Jonas, unpublished research, McGill University, 1982.
9. A.A. Korshunov et al., Russ. Metall., 3 (May-June 1994), pp. 103-108.
10. S.L. Semiatin, V. Seetharaman, and I. Weiss, Advances in the Science and Technology of Titanium Alloy Processing, ed. I. Weiss et al. (Warrendale, PA: TMS, 1997), pp. 3-73.
11. H.M. Flower, Mater. Sci. Techn., 6 (1990), pp. 1082-1092.
12. S.L. Semiatin and V. Seetharaman, unpublished research, Wright Laboratory Materials Directorate, 1995.
13. H. Margolin and P. Cohen, Titanium '80: Science and Technology, ed. H. Kimura and O. Izumi (Warrendale, PA: TMS, 1980), pp. 1555-1561.
14. H. Margolin and P. Cohen, in Ref. 13, pp. 2991-2997.
15. I. Weiss et al., in Ref. 7, pp. 1503-1510.
16. I. Weiss et al., Metall. Trans. A, 17A (1986), pp. 1935-1947.
17. G. Welsch et al., Sixth World Conference on Titanium, ed. P. Lacombe, R. Tricot, and G. Béranger (Les Ulis Cedex, France: SF2M, 1988), pp. 1289-1293.
18. S.L. Semiatin, J.C. Soper, and R. Shivpuri, Metall. and Mater. Trans. A, 25A (1994), pp. 1681-1692.
19. R.B. Sparks and J.E. Coyne, Titanium and Titanium Alloys: Scientific and Technological Aspects, ed. J.C. Williams and A.F. Belov (New York: Plenum Press, 1982), pp. 413-422.
20. G.W. Kuhlman, Microstructure/Property Relationships in Titanium Aluminides and Alloys, ed. Y-W. Kim and R.R. Boyer (Warrendale, PA: TMS, 1991), pp. 465-491.
21. J.C. Williams and E.A. Starke, Jr., Deformation, Processing, and Structure, ed. G. Krauss (Metals Park, OH: ASM, 1984), pp. 279-354.
22. R.I. Jaffee, G. Luetjering, and T.M. Rust, in Ref. 7, pp. 1081-1088.
23. J.E. Coyne, C.J. Scholl, and D.E. Batzer, Lesson 10, Titanium and Its Alloys (Materials Park, OH: Materials Engineering Institute, 1994).
24. T. Sheppard and J. Norley, Mater. Sci. Techn., 4 (1988), pp. 903-908.
25. J.F. Uginet, in Ref. 4, pp. 463-471.
26. Y. Liu and T.N. Baker, Mater. Sci. Eng., A197 (1995), pp. 125-131.
27. M. Okada et al., The Sumitomo Search, 46 (April 1991), pp. 38-41.
28. W.R. Kerr et al., in Ref. 13, pp. 2477-2486.
29. F. Larson and A. Zarkades, Properties of Textured Titanium Alloys, Report MCIC-74-20 (Columbus, OH: Metals and Ceramics Information Center, Battelle's Columbus Laboratories, 1974).
30. G. Luetjering and A. Gysler, in Ref. 7, pp. 2065-2083.
31. M. Peters and G. Luetjering, in Ref. 13, pp. 925-935.
32. A. Tanabe et al., in Ref. 13, pp. 937-945.
33. A. Sommer et al., Titanium and Titanium Alloys: Scientific and Technological Aspects, ed. J.C. Williams and A.F. Belov (New York: Plenum Press, 1982), pp. 1863-1874.
34. C.H. Hamilton and A.K. Ghosh, Metals Handbook, volume 14 (Materials Park, OH: ASM, 1988), pp. 852-873.
35. T. Altan et al., Forging Equipment, Materials, and Practices, Report MCIC HB-03 (Columbus, OH: Metals and Ceramics Information Center, Battelle's Columbus Laboratories, 1973).
36. D. Lee and W. A. Backofen, Trans. TMS-AIME, 239 (1967), pp. 1034-1040.
37. C.C. Chen and J.E. Coyne, Metall. Trans. A, 7A (1976), pp. 1931-1941.
38. S.M.L. Sastry et al., J. Metals, 35 (1) (1983), pp. 48-53.
39. M.E. Rosenblum, P.R. Smith, and F.H. Froes, in Ref. 13, pp. 1013-1024.
40. N. Furushiro et al., in Ref. 13, pp. 993-1000.
41. N. Furushiro, P.X. Ping, and S. Hori, Sixth World Conference on Titanium, ed. P. Lacombe, R. Tricot, and G. Béranger (Les Ulis Cedex, France: SF2M, 1988), pp. 1157-1160.
42. A.K. Ghosh and C.H. Hamilton, Metall Trans. A, 10A (1979), pp. 699-706.
43. H. Inagaki, Z. für Metallkunde, 86 (1995), pp. 643-650.
44. J.L. Brantingham and D.E. Thomas, Titanium 1986: Products and Applications (Dayton, OH: Titanium Development Assoc., 1987), pp. 1073-1086.
45. X.D. Ding et al., J. Mat. Eng. Perf., 4 (1995), pp. 474-485.
46. G.D. Lahoti et al., Advanced Processing Methods for Titanium, ed. D.F. Hasson and C.H. Hamilton (Warrendale, PA: TMS, 1982), pp. 23-39.
47. S.L. Semiatin and G.D. Lahoti, Metall. Trans. A, 12A (1981), pp. 1705-1717.
48. S.L. Semiatin and G.D. Lahoti, Scientific American, 245 (August, 1981), pp. 98-106.
49. J.C. Malas et al., Experimental Verification of Process Models (Metals Park, OH: ASM. 1983), pp. 358-372.
50. R. Raj, unpublished research, Cornell University, 1982.
51. T. Matsumoto et al., in Ref. 7, pp. 617-623.
52. S.L. Semiatin and V. Seetharaman, unpublished research, Wright Laboratory Materials Directorate (1995).
53. H.G. Suzuki and D. Eylon, ISIJ Inter., 33 (1993), pp. 1270-1274.
54. S.L. Semiatin and G.D. Lahoti, Metall. Trans. A, 14A (1983), 105-115.
55. S.L. Semiatin and G.D. Lahoti, Metall. Trans. A, 13A (1982), 275-288.
56. A.M. Sabroff, F.W. Boulger, and H.J. Henning, Forging Materials and Practices (New York: Rheinhold Book Company, 1968).
57. T.L. Subramanian, N. Akgerman, and T. Altan, Application of CAD/CAM to Precision Isothermal Forging of Titanium Alloys, Technical Report AFML-TR-77-108 (Columbus, OH: Battelle's Columbus Laboratories, July 1977).
58. A. Chamouard, Closed-Die Forging, Part I (Paris: Dunod, 1964).