Influence of the amount and morphology of retained austenlte on the mechanical properties of an austempered ductile iron

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 5, 1997, Pages 1143-1156

  Aranzabal, J ^a   Gutierrez, I ^b,c   Rodriguez Ibabe, J M ^b,c   Urcola, J J ^b,c  

^a TECNALIA RESEARCH AND INNOVATION   (Spain)

^b CEIT   (Spain)

^c ESII   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

FERRITE; FRACTURE TOUGHNESS; IRON METALLURGY; METALLOGRAPHIC PHASES; MORPHOLOGY; NODULAR IRON; PLASTICITY; STRESSES; TEMPERING; TENSILE PROPERTIES; TENSILE STRENGTH; THERMODYNAMIC STABILITY;

AUSTEMPERED DUCTILE IRON; AUSTEMPERING; ELONGATION; PROOF STRESS; TRANSFORMATION INDUCED PLASTICITY EFFECT;

AUSTENITE;

EID: 0031140479     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0280-6     Document Type: Article

References (41)

1. R.D. Forrest: BCIRA Int. Conf., BCIRA, Birmingham, 1978, pp. 24-31.
2. P.A. Blackmore and R.A. Harding: J. Heat Treating, 1984, vol. 3, pp. 310-25.
3. J. Aranzabal, I. Gutiérrez, J.M. Rodriguez-Ibabe, and J.J. Urcola: Mater. Sci. Technol., 1992, vol. 8, pp. 263-73.
4. H. Bayati and R. Elliott: Mater. Sci. Technol., 1995, vol. 11, pp. 284-93.
5. J. Dodd: Mod. Casting, 1978, May, pp. 60-66.
6. J. Vuorinen: On the Strain Hardening of Austempered Spheroidal Graphite Cast Iron, Diss. 48F, Technical Research Centre of Finland, Espoo, Finland, 1981.
7. B.V. Kovacs: J. Heat Treating, 1987, vol. 5, pp. 55-60.
8. G. Barbezat and H. Mayer: Sulzer Tech. Rev., 1986, vol. 2, pp. 32-38.
9. H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992.
10. B.P.J. Sandvik: Metall. Trans. A, 1982, vol. 13A, pp. 789-800.
11. K.B. Rundman, D.J. Moore, K.L. Hayrynen, W. Dubensky, and T.N. Rouns: J. Heat Treating, 1988, vol. 5, pp. 79-95.
12. J. Aranzabal, I. Gutiérrez, J.M. Rodríguez-Ibabe, and J.J. Urcola: Anales Mecánica Fractura, 1990, vol. 7, pp. 39-46.
13. J. Aranzabal, I. Gutiérrez, J.M. Rodriguez-Ibabe, and J.J. Urcola: in Reliability and Structural Integrity of Advanced Materials, ECF9, S. Sedmak, A. Sedmak, and D. Ru'zi'c eds., Engineering Materials Advisory Services, Ltd., Warley, West Midlands, United Kingdom, 1992, vol. 1, pp. 81-86.
14. J. Aranzabal, I. Gutierrez, and J.J. Urcola: Mater. Sci. Technol., 1994, vol. 10, pp. 728-37.
15. I. Gutierrez, J. Aranzabal, F. Castro, and J.J. Urcola: Metall. Trans. A, 1995, vol. 26A, pp. 1045-60.
16. T.N. Rouns and K.B. Rundman: Transactions of the American Foundrymen's Society, Proc. Conf., Des Plaines, IL, American Foundrymen's Society, Des Plaines, IL, 1987, vol. 95, pp. 851-74.
17. V.T.T. Miihkinen and D.V. Edmonds: Mater. Sci. Technol., 1987, vol. 3, pp. 432-40.
18. B.P.J. Sandvik and H.P. Nevalainen: Met. Technol., 1981, June, pp. 213-20.
19. J.P. Naylor: Metall. Trans. A, 1979, vol. 10A, pp. 861-73.
20. K. Sugimoto, M. Misu, M. Kobayashi, and H. Shirasawa: Iron Steel Inst. Jpn. Int., 1993, vol. 7, pp. 775-82.
21. C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 209-14.
22. A.A.B. Sugden and H.K.D.H. Bhadeshia: Metall. Trans. A, 1988, vol. 19A, pp. 1597-1602.
23. H.K.D.H. Bhadeshia and L.E. Svensson: Mathematical Modelling of Weld Phenomena, eds. H. Cerjak and K.E. Easterling, The Institute of Materials, 1993, pp. 109-80.
24. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers, London, 1978.
25. Y. Tomita: Mater. Sci.-Technol., 1991, vol. 7, pp. 299-306.
26. J.H. Hollomon: Trans. AIME, 1945, vol. 162, p. 268.
27. H. Paruz and D.V. Edmonds: Mater. Sci. Eng., 1989, vol. A117, pp. 67-74.
28. W.B. Morrison: Trans. ASM, 1966, vol. 59, pp. 824-26.
29. V.F. Zackay, E.R. Parker, D. Farh, and R. Busch: Trans. ASM, 1967, vol. 59, pp. 252-59.
30. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245-53.
31. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619-26.
32. A.S. Hamid Ali, K.I. Uzlov, N. Darwish, and R. Elliot: Mater. Sci. Technol., 1994, vol. 10, pp. 35-40.
33. M. Sarikaya, B.G. Steinberg, and G. Thomas: Metall. Trans. A, 1982, vol. 13A, pp. 2227-37.
34. V. Martinez, R. Palma, and J.J. Urcola: J. Mater. Sci., 1990, vol. 25, pp. 3359-67.
35. B.V. Narasimha Rao and G. Thomas: Metall. Trans. A, 1980, vol. 11 A, pp. 441-57.
36. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1983, vol. 17, pp. 411-19.
37. Z. Mei and J.W. Morris: Metall. Trans. A, 1990, vol. 21A, pp. 3137-3152.
38. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 13-31.
39. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 337-47.
40. J.R. Rice and G.F. Rosengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1-12.
41. C.F. Shih: Tables of Hutchinson-Rice-Rosengren Singular Field Quantities, MRL E-147, Brown University, Providence, RI, 1983, p. 71.