Fundamentals of corrosion fouling

Experimental Thermal and Fluid Science

Volumn 14, Issue 4, 1997, Pages 335-355

  Somerscales, Euan F C ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Corrosion; Fouling; Oxygenated water

Indexed keywords

CORROSION; DEPOSITION; FLOW OF WATER; HEAT TRANSFER; MATHEMATICAL MODELS; OXYGEN; TRANSPORT PROPERTIES;

CORROSION FOULING; HEAT TRANSFER SURFACES; OXYGENATED WATER;

FOULING;

EID: 0031140207     PISSN: 08941777     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0894-1777(96)00136-7     Document Type: Article

References (84)

1. Kern, D. Q., and Seaton, R. E., A Theoretical Analysis of Thermal Surface Fouling. Br. Chem. Eng. 4, 258-262, 1959.
2. Epstein, N., Fouling in Heat Exchangers. In Heat Transfer 1978: Proc. Sixth Int. Heat Transfer Conf., Vol. 6, pp. 235-254, Hemisphere, Washington, DC, 1979. (Reproduced in Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 701-734, Hemisphere, Washington, DC, 1981).
3. Epstein, N., Fouling in Heat Exchangers. In Heat Transfer 1978: Proc. Sixth Int. Heat Transfer Conf., Vol. 6, pp. 235-254, Hemisphere, Washington, DC, 1979. (Reproduced in Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 701-734, Hemisphere, Washington, DC, 1981).
4. Epstein, N., Fouling: Technical Aspects (Afterword to Fouling in Heat Exchangers). In Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 31-53, Hemisphere, Washington, DC, 1981.
5. Lister, D. H., Corrosion Products in Power Generating Systems. In Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 135-200, Hemisphere, Washington, DC, 1981.
6. E. F. C. Somerscales, Corrosion Fouling. In Fouling in Heat Exchange Equipment, J. M. Chenoweth and M. Impagliazzo, Eds., HTD-Vol. 17, pp. 17-27, American Society of Mechanical Engineers, New York, 1981.
7. E. F. C. Somerscales, Corrosion Fouling: Liquid Side. In Fouling Science and Technology, L. F. Melo, T. R. Bott, and C. A. Bernardo, Eds., pp. 621-635, Kluwer, Dordrecht, The Netherlands, 1988.
8. Meadowcroft, D. B., and Cox, W. M., Dewpoint Corrosion: Mechanisms and Solutions. In Dew Point Corrosion, D. R. Holmes, Ed., pp. 17-34, Ellis Horwood, Chichester, 1985.
9. Lukas, H., and Mehta, B., Acid Corrosion in a CAES Recuperator. ASME Paper No. 86-GT-83, American Society of Mechanical Engineers, New York, NY, 1986.
10. McCallister, R. A., Eastham, D. H., Dougharty, N. A., and Hollier, M., A Study of Scaling and Corrosion in Condenser Tubes Exposed to River Water. Corrosion 17, 579t-588t, 1961
11. Griess, J. C., Savage, H. C., and English, J. L., Effect of Heat Flux on the Corrosion of Aluminum by Water: Part IV. U.S. Atomic Energy Commission Report ORNL-3541, February 1964.
12. Gutzeit, J., Corrosion and Fouling of Admiralty, Aluminum, and Steel Tubes in Open Recirculating Cooling Water Systems. Mater. Prot. 4(July), 28-34, 1965.
13. Ritter, R. B., and Suitor, J. W., Fouling Research on Copper and its Alloys: Seawater Studies. Heat Transfer Research Inc. Progress Report, April 1976.
14. Characklis, W. G., Microbial Fouling: A Process Analysis. In Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 251-291, Hemisphere, Washington, DC, 1981.
15. Parry, D. J., Hawthorn, D., and Rantell, A., Fouling of Power Station Condensers Within the Midlands Region of the C.E.G.B. In Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 569-586, Hemisphere, Washington, DC, 1981.
16. Somerscales, E. F. C., and Sanatgar, H., Investigation of the Deposit Removal Processes on a Fouled Surface. In Heat Transfer Equipment Fundamentals, Design, Applications, and Operating Problems, R. K. Shah, Ed., HTD-Vol. 108, pp. 261-271, American Society of Mechanical Engineers, New York, 1989.
17. Somerscales, E. F. C., and Sanatgar, H., Hydrodynamic Removal of Corrosion Products from a Surface. Br. Corr. J. 27, 36-44, 1992.
18. Somerscales, E. F. C., Dugan, T. E., and Tse, S. T., Corrosion Fouling on Aluminum Heat Transfer Surfaces. Condenser Biofouling Control: State-of-the-Art Symp., Lake Buena Vista, FL, pp. 2-87-2-96, June 18-20, 1985, Electric Power Research Institute, Palo Alto, CA, 1985.
19. Dillon, R. L., and Troutner, V. H., Observations on the Mechanisms and Kinetics of Aqueous Aluminum Corrosion. U.S. Atomic Energy Commission Report No. HW-51849, September 30, 1957.
20. Somerscales, E. F. C., and Kassemi, M., Measurement of the Thermal Resistance of Corrosion Products. Eng. Foundation Conf. on Fouling of Heat Exchanger Surfaces, White Haven, PA, pp. 105-125, October 31-November 5, 1982, Engineering Foundation, New York, 1983.
21. Somerscales, E. F. C., and Kassemi, M., Fouling Due to in-situ Corrosion Products. In Fouling in Heat Exchange Equipment, J. W. Suitor and A. M. Pritchard, Eds., HTD-Vol. 35, pp. 1-9, American Society of Mechanical Engineers, New York, 1984.
22. Somerscales, E. F. C., and Kassemi, M., Fouling Due to Corrosion Products Formed on a Heat Transfer Surface. Trans. ASME J. Heat Transfer 109, 267-270, 1984.
23. Panchal, C. B., and Sasscer, D. S., Biofouling and Corrosion Fouling of Plain and Enhanced Aluminum Surfaces. In Fouling and Enhancement Interactions, T. J. Rabas and J. M. Chenoweth, Eds., HTD-Vol. 164, pp. 9-15, American Society of Mechanical Engineers, New York, 1991.
24. Evans, U. R., The Laws of Expanding Circles and Spheres in Relation to the Lateral Growth of Surface Films and the Grain-Size of Metals. Trans. Faraday Soc. 41, 365-374, 1945.
25. Yang Chuanfang, Mechanisms of Calcium Carbonate Scaling During and Post Induction Period. Fouling Mitigation of Industrial Heat Exchangers, June 18-23, 1995, Shell Beach, CA, Engineering Foundation, New York, 1995.
26. Sheikh, A. K., Boak, J. K., and Hausen, D. A., Statistical Modeling of Pitting Corrosion and Pipeline Reliability. Corrosion 46, 190-197, 1990.
27. Gabrielli, C., Huet, F., Keddam, M., and Oltra, R., A Review of the Probabilistic Aspects of Localized Corrosion. Corrosion 46, 266-278, 1990.
28. Mahato, B. K., Voora, S. K., and Shemilt, L. W., Steel Pipe Corrosion under Flow Conditions I: An Isothermal Correlation for a Mass Transfer Model. Corr, Sci. 8, 173-193, 1968.
29. Mahato, B. K., Steward, F. R., and Shemilt, L. W., Steel Pipe Corrosion under Flow Conditions II: Mass Transfer Correlation with Temperature Effects. Corr. Sci. 8, 737-749, 1968.
30. Mahato, B. K., Cha, C. Y., and Shemilt, L. W., Unsteady Mass Transfer Coefficients Controlling Steel Pipe Corrosion under Isothermal Flow Conditions. Corr. Sci. 20, 421-441, 1980.
31. Newman, J., Electrochemical Systems. Prentice-Hall, Englewood Cliffs, NJ, 1973.
32. Pickett, D. G., Electrochemical Reactor Design. Elsevier, New York, 1977.
33. Dillon, R. L., Dissolution of Aluminum Oxide as a Regulating Factor in Aqueous Aluminum Corrosion. AEC-Euratom Conf. on Aqueous Corrosion of Reactor Materials, Brussels, Belgium, October 14-17, 1959, U.S. Atomic Energy Commission Report TID-7587, July 1960.
34. Burrill, K. A., Corrosion Product Transport in Water-Cooled Nuclear Reactors I: Pressurized Water Operation. Can. J. Chem. Eng. 55, 54-61, 1977.
35. Bartlett, J. W., Theory of Corrosion Product Generation, Dispersion and Activation Processes. U.S. Atomic Energy Commission Report BNWL 676, June 10, 1968.
36. Charlesworth, D. H., The Deposition of Corrosion Products in Boiling Water Systems. AICHE Chem. Eng. Prog. Symp. Ser. 66(104), 21-30, 1970.
37. Beal, S. K., Prediction of Heat Exchanger Fouling Rates: A Fundamental Approach. Presented at American Institute of Chemical Engineers meeting, New York, AICHE Paper No. 76-C, November 1972.
38. Visser, J., Measurement of the Force of Adhesion Between Submicron Carbon-Black Particles and a Cellulose Film in Aqueous Solution. J. Colloid Sci. 34, 26-31, 1970.
39. Ross, T. K., Corrosion and Heat Transfer: A Review. Br. Corr. J. 2, 131-142, 1967.
40. Taborek, J., Aoki, T., Ritter, R. B., and Palen, J. W., Fouling: The Major Unresolved Problem in Heat Transfer, Part I. Chem. Eng. Prog. 68(2), 59-67, 1972.
41. Loo, C. E., and Bridgwater, J., Theory of Thermal Stresses and Deposit Removal. In Progress in the Prevention of Fouling in Industrial Plant, A. M. Pritchard, Ed., pp. 154-173, Institution of Corrosion Science and Technology, London, 1981.
42. Morse, R. W., and Knudsen, J. G., Effect of Alkalinity on the Scaling of Simulated Cooling Tower Water. Can. J. Chem. Eng. 55, 272-278, 1977.
43. Manning, M. I., Geometrical Effects on Oxide Scale Integrity. Corrosion Sci. 21, 301-316, 1981.
44. Hancock, P., and Hurst, R. C., The Mechanical Properties and Breakdown of Films at Elevated Temperatures. In Advances in Corrosion Science and Technology, M. G. Fontana and R. W. Staehle, Eds., Vol. 4, pp. 1-84, Plenum, New York, 1974.
45. Coney, M. W. E., Erosion-Corrosion: The Calculation of Mass Transfer Coefficients. Central Electricity Generating Board Report No. RD/L/N 197/80, May 1981.
46. Coney, M. W. E., Wilkin, S. J., and Oates, H. S., Thermal-Hydraulic Effects on Mass Transfer Behaviour and on Erosion-Corrosion Metal Loss Rates. Central Electricity Generating Board Report No. TPRD/L/2349/N82, January 1983.
47. Postlethwaite, J., and Lotz, U., Mass Transfer at Erosion-Corrosion Roughened Surfaces. Can. J. Chem. Eng. 66, 75-78, 1988.
48. Dillon, R. L., Observations on the Mechanisms and Kinetics of Aqueous Aluminum Corrosion. Corrosion 15, 13t-16t, 1959.
49. Somerscales, E. F. C., Fundamental Ideas in Corrosion Testing. In Corrosion in Heat Transfer Conditions, A. D. Mercer, Ed., pp. 1-36, Society of Chemical Industry, London, 1983.
50. Somerscales, E. F. C., Application of Dimensionless Groups to Corrosion Testing with and without Heat Transfer. Br. Corr. J. 21, 213-220, 1986.
51. Hellums, J. D., and Churchill, S. W., Simplification of the Mathematical Description of Boundary and Initial Value Problems. Am. Inst. Chem. Eng. J. 10, 110-114, 1969.
52. Smith, C. L., Pike, R. W., and Murrill, P. W., Formulation and Optimization of Mathematical Models. International Publishing, Scranton, PA, 1970.
53. Evans, U. R., The Corrosion and Oxidation of Metals: Scientific Principles and Practical Applications. Edward Arnold, London, 1960.
54. Griess, J. C., Savage, H. C., Rainwater, J. G., Mauney, T. H., and English, T. L., Effect of Heat Flux on the Corrosion of Aluminum by Water: Part III. U.S. Atomic Energy Commission, Report ORNL-3230, December 20, 1961.
55. Griess, J. C., Savage, H. C., Mauney, T. H., English, J. L., and Rainwater, G. J., Effect of Heat Flux on the Corrosion of Aluminum by Water: Part II. U.S. Atomic Energy Commission, Report ORNL-3056, February 27, 1961.
56. Griess, J. C., Savage, H. C., Mauney, T. H., and English, J. L., Effect of Heat Flux on the Corrosion of Aluminum by Water: Part I. U.S. Atomic Energy Commission, Report ORNL-2939, May 13, 1960.
57. Troup, D. H., and Richardson, J. A., The Link Between the corrosion and Calcium Carbonate Scaling Susceptibilities of Heat Transfer Surfaces. Werkstoffe Korrosion 29, 312-320, 1978.
58. Efird, K. D., The Interrelation of Corrosion and Fouling for Metals in Seawater, Mater. Performance 15(4), 16-25, 1976.
59. Panchal, C., Larsen-Basse, J., and Little, B., Bio-fouling Control for Marine Heat Exchangers Using Intermittent Chlorination. In Fouling in Heat Exchange Equipment, J. W. Suitor and A. M. Pritchard, Eds., HTD-Vol. 35, pp. 97-103, American Society of Mechanical Engineers, New York, 1984.
60. Panchal, C. B., Experimental Investigation of Seawater Biofouling for Enhanced Surfaces. In Heat Transfer Equipment Fundamentals, Design, Applications, and Operating Problems, R. K. Shah, Ed., HTD-Vol. 108, pp. 231-238, American Society of Mechanical Engineers, New York, 1989.
61. Panchal, C. B., Experimental Investigation of Marine Biofouling and Corrosion for Tropical Seawater. In Fouling Science and Technology, L. F. Melo, T. R. Bott, and C. A. Bernardo, Eds., pp. 241-247, Kluwer, Dordrecht, The Netherlands, 1988.
62. Hopkins, R. M., and Epstein, N., Fouling of Heated Stainless Steel Tubes by a Flowing Suspension of Ferric Oxide in Water. In Heat Transfer 1974, Vol. 5, pp. 180-184, Proc. Fifth Int. Heat Transfer Conf., Tokyo, September 3-7, 1974, Japan Society of Mechanical Engineers and Society of Chemical Engineers, Japan, Tokyo, 1974.
63. Marcus, B. D., Silverman, H. P., Tsukamoto, W. T., Hunter, J. A., Gillam, W. S., and Colely, F. H., Effect of Surface Potential on Scale Formation. Office of Saline Water, Research and Development Progress Report No. 393, Washington, DC, January, 1969.
64. Lin, S. -H., and Dexter, S. C., Effects of Temperature and Magnesium Ions on Calcareous Deposits. Corrosion 44, 615-622, 1988.
65. Galloway, T. R., Heat Transfer Fouling Through Growth of Calcareous Film Deposits. Int. J. Heat Mass Transfer 16, 443-460, 1973.
66. Lister, D. H., The Transport of Radioactive Corrosion Products in High Temperature Water III: The Interaction of Dissolved Cobalt with Heated Surfaces. Nucl. Sci. Eng. 85, 221-232, 1983.
67. Lister, D. H., Davidson, R. D., and McAlpine, E., The Mechanism and Kinetics of Corrosion Product Release from Stainless Steel in Lithiated High Temperature Water. Corrosion Sci. 27, 113-140, 1987.
68. Lister, D. H., The Transport of Radioactive Corrosion Products in High Temperature Water I: Recirculating Loop Experiments. Nucl. Sci. Eng. 58, 239-251, 1975.
69. Lister, D. H., Mass Transfer in the Contamination of Isothermal Steel Surfaces. Nucl. Sci. Eng. 61, 107-118, 1976.
70. Lister, D. H., The Transport of Radioactive Corrosion Products in High-Temperature Water II: The Activation of Isothermal Steel Surfaces. Nucl. Sci. Eng. 59, 406-426, 1976.
71. Lister, D. H., The Accumulation of Radioactive Corrosion Prod ucts in Nuclear Steam Generators Corrosion 35, 219-227, 1979.
72. Lister, D. H., Activity Transport and Corrosion Processes in PWRs. Nucl. Energ. 32(2), 103-114, 1993.
73. Honda, T., Izumiya, M., Minato, A., Ohsumi, K., and Matsubayashi, H., Radiation Buildup on Stainless Steel in a Boiling Water Reactor Environment. Nucl. Technol. 64, 35-42, 1984.
74. Honda, T., Minato, A., Ohsumi, K., and Matsubayashi, H., Radioactive Contamination of Carbon Steel in a Boiling Water Reactor. Nucl. Technol. 65, 438-443, 1984.
75. Honda, T., Minato, A., Ohsumi, K., and Matsubayashi, H., Deposition of Radioactive Ions on Boiling Water Reactor Component Materials. Corrosion 43, 179-185, 1987.
76. Honda, T., Ohashi, K., Furutani, Y., and Minato, A., Suppression of Radiation Buildup on Stainless Steel in a Boiling Watet Reactor. Corrosion 43, 564-570, 1987.
77. Karasawa, H., Asakura, Y., Sakagami, M., and Uchida, S., Experimental Evaluation of Cobalt Behavior on BWR Fuel Rod Surface. Corrosion, 87, San Francisco, CA, Paper No. 81, March 9-13, 1987.
78. Wilson, E. E., A Basis for Rational Design of Heat Transfer Apparatus. Trans. Am. Soc. Mech. Eng. 37, 47-82, 1915.
79. Knudsen, J. G., Apparatus and Techniques for Measurement of Fouling of Heat Transfer Surfaces. In Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, Eds., pp. 57-81, Hemisphere, Washington, DC, 1981.
80. Mikk, I. R., Tiikma, T. B., and Petrov, Y. G., Determination of the Thermal Resistance of an Oxide Film on Heat Transfer Tubes in Boilers. Thermal Eng. 19(8), 85-87, 1972.
81. Picologlou, B. F., Zelver, N., Characklis, W. G., Biofilm Growth and Hydraulic Performance, Proc. Am. Soc. Civil Eng. J. Hydraulic Div. 106, 733-746, 1980.
82. Bauer, N., and Lewin, S. Z., Determination of Density. In Techniques of Chemistry, A. Weissburger and B. W. Rossiter, Eds., Vol. 1, Part 4, pp. 57-124, Wiley-Interscience, New York, 1972.
83. Butler, G., Mercer, A. D., and Warren, G. M., Techniques for Evaluating Corrosion Inhibitors in Heat Transfer Conditions. EUROCOR '77, Proc. Sixth European Congress on Metallic Corrosion, pp. 349-355, Society of Chemical Industry, London, 1977.
84. Pleskov, Y. V., and Filinovskii, V. Y., The Rotating Disc Electrode. Consultants Bureau, New York, 1976.