A method of using neural networks and inverse kinematics for machine tools error estimation and correction

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 119, Issue 2, 1997, Pages 247-254

  Mou, J ^a  

^a ARIZONA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING TOOLS; END EFFECTORS; ERROR CORRECTION; INVERSE KINEMATICS; NEURAL NETWORKS; PARAMETER ESTIMATION; TIME VARYING CONTROL SYSTEMS;

TIME VARYING POSITIONING ERRORS;

MACHINE TOOLS;

EID: 0031139804     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2831101     Document Type: Article

References (31)

1. Balsamo, A., Marques, D., and Sartori, S., 1990, “A Method for Thermal Deformation Corrections of CMMs,” CIRP, Vol. 39, No. 1, pp. 557-560.
2. Busch, K., Kunzmann, H., and Waldele, F., 1985, “Calibration of Coordinate Measuring Machines,” Precision Engineering, Vol. 7, pp. 139-144.
3. Chen, J. S., Yuan, J. S., Ni, J., and Wu, S. M., 1992, “Compensation of Non-rigid Body Kinematic Effect on a Machining Center,” Transaction of the North American Manufacturing Research Institute of SME, Vol. 20, pp. 325-329.
4. Chen, J. S., Yuan, J. S., Ni, J., and Wu, S. M., 1992, “Thermal Error Modeling for Volumetric Error Compensation,” Sensors and Signal Processing for Manufacturing, PED-Vol. 55, ASME WAM, pp. 113-125.
5. Chen, J. S., Yuan, J. S., Ni, J., and Wu, S. M., 1993, “Real-time Compensation for Time-variant Volumetric Errors on a Machine Center,” ASME Journal of Engineering for Industry, Vol. 115, pp. 472-479.
6. Donmez, M. A., Blomquist, D. S., Hocken, R. J., Liu, C. R., and Barash, M. M., 1986, “A General Methodology for Machine Tool Accuracy Enhancement by Error Compensation,” Precision Engineering, Vol. 8, No. 4, pp. 187-196.
7. Donmez, M. A., Liu, C. R., and Barash, M. M., 1987, “A Generalized Mathematical Model for Machine Tool Errors,” Modeling, Sensing, and Control of Manufacturing Processes, ASME Winter Annual Conference, PED-Vol. 23/DSC-Vol. 4, pp. 231-243.
8. Duffie, N. A., and Malmberg, S. J., 1987, “Error Diagnosis and Compensation using Kinematic Model and Position Error Data,” CIRP, Vol. 36, No. 1, pp. 355-358.
9. Dufour, P., and Groppetti, R., 1981, “Computer Aided Accuracy Improvement in Large NC Machine Tools,” M.T.D.R. Conference Proceedings, Vol. 22, pp. 611-618.
10. Ferreira, P.M., and Liu, C. R., 1986, “An Analytical Quadratic Model for the Geometric Error of a Machine Tool,” J. of Manufacturing Systems, Vol. 5, No. 1, pp. 51-63.
11. Ferreira, P.M., and Liu, C. R., 1993, “A Method for Estimating and Compensating Quasistatic Errors of Machine Tools,” ASME Journal of Engineering for Industry, Vol. 115, pp. 149-159.
12. Hocken, R. J., Simpson, J. A., Borchardt, B., Lazar, J., Reeve, C., and Stein, P., 1977, “Three Dimensional Metrology,” CIRP, Vol. 26, No. 1, pp. 403-408.
13. Hocken, R. J.,1980, “Technology of Machine Tools, Vol. 5: Machine Tool Accuracy,” UCRL-52960-5, Lawrence Livermore Laboratory, University of California, Livermore, California.
14. Jedrzejewski, J., Kaczmarek, J., Kowal, Z., and Winiarski, Z., 1990, “Numerical Optimization of Thermal Behaviour of Machine Tools,” CIRP, Vol. 39, No. 1, pp. 379-382.
15. Kung, S. Y., 1993, Digital Neural Networks, Prentice-Hall Inc., Englewood Cliffs, New Jersey.
16. Kunzmann, H., and Waldele, F., 1983, “On Testing Coordinate Measuring Machines (CMM) with Kinematic Reference Standards (KRS),” CIRP, Vol. 32, No. 1, pp. 465-468.
17. Kunzmann, H., Trapet, E., and Waldele, F., 1990, “A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects,” CIRP, Vol. 39, No. 1, pp. 561-564.
18. Matsuo, M., Yasui, T., Inamura, T., and Matsumura, M., 1986, “High Speed Test of Thermal Effects for a Machine-Tool Structure Based on Model Analysis,” Precision Engineering, Vol. 8, No, 2, pp. 72-78.
19. Mou, J., and Liu, C. R., 1992, “A Method for Enhancing the Accuracy of CNC Machine Tools for On-Machine Inspection,” J. of Manufacturing Systems, Vol. 11, No. 4., pp. 229-237.
20. Mou, J., and Liu, C. R., 1994, “A Robust Error Correction Method for Multi-Axis Machines,” Proceedings of Symposium on Mechatronics for Manufacturing of ASME Winter Annual Meeting, DSC-Vol. 55-62, pp. 1011-1018.
21. National Aerospace Standard, 1969, “Uniform Cutting Tests-NAS Series Metal Cutting Equipment Specifications,” Aerospace Industries Association of America Inc., Washington D.C.
22. NISTIR, 1989, “Progress Report of the Quality in Automation Project for FY88,” NISTIR 89-4045.
23. Okushima, K., Kakino, Y., and Higashimoto, A., 1975, “Compensation of Thermal Displacement by Coordinate System Correction,” CIRP, Vol. 24, No. 1, pp. 327-331.
24. Sata, T., Takeuchi, Y., Sato, N., and Okubo, N., 1973, “Analysis of Thermal Deformation of Machine Tool Structure and its Application,” M.T.D.R. Conference Proceedings, Vol. 14, pp. 275-279.
25. Sata, T., Takeuchi, Y., and Okubo, N., 1975, “Control of the Thermal Deformation of a Machine Tool,” M.T.D.R. Conference Proceedings, Vol. 16, pp. 203-208.
26. Sata, T., Takeuchi, Y., Sakamoto, M., and Week, M., 1981, “Improvement of Working Accuracy on NC Lathe by Compensation for the Thermal Expansion of Tool,” CIRP, Vol. 30, No. 1, pp. 445-449.
27. Sheth, P., and Uicker, J. Jr., 1972, “IMP (Integrated Mechanisms Program), a Computer-Aided Design Analysis System for Mechanisms and Linkages,” ASME Journal of Engineering for Industry, Vol. 94, pp. 454-464.
28. Takeuchi, Y., Sakamoto, M., and Sata, Y., 1982, “Improvement in the Working Accuracy of an NC Lathe by Compensating for Thermal Expansion,” Precision Engineering, Vol. 4, No. 1, pp. 19-24.
29. Teeuwsen, J. W. M. C., Soons, J. A., and Schellekens, P. H. J., 1989, “A General Method for Error Description of CMMs Using Polynomial Fitting Procedures,” CIRP, Vol. 38, No. 1, pp. 505-510.
30. Venugopal, R., and Barash, M., 1986, “Thermal Effects on the Accuracy of Numerically Controlled Machine Tools,” CIRP, Vol. 35, No. 1, pp. 255-258.
31. Week, M., and Zangs, L., 1975, “Computing the Thermal Behavior of Machine Tools Using the Finite Element Method-Possibilities and Limitations,” Proceedings of Mach. Tools Des. and Res. Conference, Vol. 16, pp. 185-193.