A semi-implicit integration scheme for rate-dependent and rate-independent plasticity

Computers and Structures

Volumn 63, Issue 3, 1997, Pages 579-600

  Marin, E B ^a   McDowell, D L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC MODULI; ELASTICITY; EQUATIONS OF MOTION; HARDENING; INTEGRATION; KINETIC THEORY; STRAIN; THERMAL EFFECTS; VISCOUS FLOW;

PLASTIC STRAIN; RATE TANGENT MODULUS METHOD;

PLASTICITY;

EID: 0031139379     PISSN: 00457949     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7949(97)89625-3     Document Type: Article

References (49)

1. B. Moran, M. Ortiz and C. F. Shih, Formulation of implicit finite element methods for multiplicative finite deformation plasticity. Int. J. Numer. Meth. Engng 29, 483-514 (1990).
2. C. W. Gear, Numerical Initial Value Problems in Ordinary Differential Equations. Prentice Hall, Englewood Cliffs, N.J. (1971).
3. R. Narasimhan, A. J. Rosakis and B. Moran, A three-dimensional numerical investigation of fracture initiation by ductile failure mechanisms in a 4340 steel. Advances in Fracture/Damage Models for the Analysis of Engineering Problems, ASME AMD 137, 13-53 (1992).
4. J. M. M. C. Marques, Stress computation in elastoplasticity. Engng Comput. 1, 42-51 (1984).
5. J. C. Simo and T. J. R. Hughes, General return mapping algorithms for rate-independent plasticity. In Constitutive Laws for Engineering Materials: Theory and Applications, eds. C. S. Desai et al. Elsevier Science Publishing, New York, pp. 221-231 (1987).
6. I. Cormeau, Numerical stability in quasistatic elastovisco-plasticity. Int. J. Numer. Meth. Engng 9, 109-127 (1975).
7. M. Ortiz and J. C. Simo, An analysis of a new class of integration algorithms for elastoplastic constitutive relations. Int. J. Numer. Meth. Engng 23, 353-366 (1986).
8. S. Nemat-Nasser and Y.-F. Li, A new explicit algorithm for finite-deformation elastoplasticity and elastoviscoplasticity: performance evaluation. Comput. Struct. 44, 937-963 (1992).
9. J. C. Simo and R. L. Taylor, A return mapping algorithm for plane stress elastoplasticity. Int. J. Numer. Meth. Engng 22, 649-670 (1986).
10. 2 flow theory. Comput. Struct. 43, 1117-1133 (1992).
11. D. Pierce, C. F. Shih and A. Needleman, A tangent modulus method for rate-dependent solids. Comput. Struct. 18, 875-887 (1984).
12. S. Yoshimura, K. L. Chen and S. N. Atluri, A study of two alternate tangent modulus formulations and attendant implicit algorithms for creep as well as high-strain-rate plasticity. Int. J. Plasticity 3, 391-413 (1987).
13. J. C. Simo and R. L. Taylor, Consistent tangent operators for rate-independent elastoplasticity. Comput. Meth. Appl. Mech. Engng 48, 101-118 (1985).
14. N. Aravas, On the numerical integration of a class of pressure-dependent plasticity models. Int. J. Numer. Meth. Engng 24, 1395-1416 (1987).
15. T. J. R. Hughes and R. L. Taylor, Unconditionally stable algorithms for quasi-static elasto/visco-plastic finite element analysis. Comput. Struct. 8, 169-173 (1978).
16. A. M. Lush, G. Weber and L. Anand, An implicit time integration procedure for a set of internal variable constitutive equations for isotropic elasto-viscoplasticity. Int. J. Plasticity 5, 521-549 (1989).
17. G. Weber and L. Anand, Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids. Comput. Meth. Appl. Mech. Engng 79, 173-202 (1990).
18. J. W. Ju, Consistent tangent moduli for a class of viscoplasticity. J. Engng Mech. 116, 1764-1779 (1990).
19. G. G. Weber, A. M. Lush, A. Zavaliangos and L. Anand, An objective time-integration procedure for isotropic rate-independent and rate-dependent elastic-plastic constitutive equations. Int. J. Plasticity 6, 701-744 (1990).
20. A. D. Freed, M. Yao and K. P. Walker, Asymptotic integration algorithms for first-order ODEs with application to viscoplasticity. NASA Technical Memorandum 105587 (1992).
21. M. Ortiz and E. P. Popov, Accuracy and stability of integration algorithms for elastoplastic constitutive relations. Int. J. Numer. Meth. Engng 21, 1561-1576 (1985).
22. ABAQUS, Reference Manuals, Hibbitt, Karlsson and Sorensen Inc. (1993).
23. P. Perzyna, Fundamental problems in viscoplasticity. Advances in Applied Mechanics, ed. G. G. Chernyi et al. Academic Press, New York, Vol. 9, pp. 243-377 (1966).
24. K. S. Chan, S. R. Bodner, K. P. Walker and U. S. Lindholm, A survey of unified constitutive theories. Second Symposium on Nonlinear Constitutive Relations for High Temperature Applications, NASA Lewis Research Center (June 1984).
25. T. J. R. Hughes and J. Winget, Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis. Int. J. Numer. Meth. Engng 15, 1862-1867 (1980).
26. R. Rubinstein and S. N. Atluri, Objectivity of incremental constitutive relations over finite time steps in computational finite deformation analysis. Comput. Meth. Appl. Mech. Engng 36, 277-290 (1983).
27. K. W. Reed and S. N. Atluri, Analysis of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm. Comput. Meth. Appl. Mech. Engng 39, 245-295 (1983).
28. G. Weber, Computational procedures for a new class of finite deformation elastic-plastic constitutive equations. Ph.D. thesis, Mechanical Engineering, Massachusetts Institute of Technology (1988).
29. C. Nyssen, An efficient and accurate iterative method, allowing large incremental steps, to solve elasto-plastic problems. Comput. Struct. 13, 63-71 (1981).
30. A. C. F. Cocks, Inelastic deformation of porous materials. J. Mech. Phys. Solids 37, 693-715 (1989).
31. J. C. Michel and P. Suquet, The constitutive law of nonlinear viscous and porous materials. 40, 783-812 (1992).
32. J. M. Duva and P. D. Crow, The Densification of Powders by Power-Law Creep During Hot Isostatic Pressing 40, 31-35 (1992).
33. P. Sofronis and R. M. McMeeking, Creep of power-law material containing spherical voids. ASME J. Appl. Mech. 59, S88-S95 (1992).
34. S. M. Doraivelu, H. L. Gegel, J. S. Gunasekera, J. C. Malas, J. F. Thomas and J. T. Morgan, A new yield function for compressible P/M materials. Int. J. Mech. Sci. 26, 527-535 (1984).
35. M. Oyane, S. Shima and Y. Kono, Theory of plasticity for porous metals. Bull. JSME, 16, 1254-1262 (1973).
36. A. L. Gurson, Continuum theory of ductile rupture by void nucleation and growth: Part I - yield criteria and flow rules for porous ductile media. J. Engng Mater. Technol. 99, 2-15 (1977).
37. V. Tvergaard, Influence of voids on shear band instabilities under plane strain conditions. Int. J. Fracture 17, 389-407 (1981).
38. D. L. McDowell, E. Marin and C. Bertoncelli, A combined kinematic-isotropic hardening theory for porous inelasticity of ductile metals. Int. J. Damage Mech. 2, 137-161 (1993).
39. D. J. Bammann, Modeling and temperature and strain rate dependent large deformation of metals. Appl. Mech. Rev., 43(5), Part 2, eds E. Krempl and D. L. McDowell, S312-S319 (1990).
40. A. C. F. Cocks and M. F. Ashby, Intergranular fracture during power-law creep under multiaxial stresses. Metal Sci. 14, 395-402 (1980).
41. D. J. Bammann, M. L. Chiesa, A. McDonald, W. A. Kawahara, J. J. Dike and V. D. Revelli, Prediction of ductile failure in metal structures. Proceedings of the 1990 Winter Annual Meeting of the ASME, Dallas, 11 (1990).
42. E. B. Marin, A critical study of finite strain porous inelasticity. Ph.D. thesis, Mechanical Engineering, Georgia Institute of Technology (1993).
43. S. Bodner and Y. Partom, Constitutive equations for elastic-viscoplastic strain hardening materials. ASME J. Appl. Mech. 385-389 (1975).
44. J.-L. Chaboche, Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5(3), 247-302 (1989).
45. P. S. Follansbee and U. F. Kocks, A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metall. 36(1), 81-93 (1988).
46. A. D. Freed, J.-L. Chaboche and K. P. Walker, A viscoplastic theory with thermodynamic considerations. Acta Mech. 90, 155 (1991).
47. D. L. McDowell, A nonlinear kinematic hardening theory for cyclic thermoplasticity and thermoviscoplasticity. Int. J. Plasticity 8, 695-728 (1992).
48. A. K. Miller, An inelastic constitutive model for monotonic, cyclic and creep deformation. ASME J. Engng Mater. Technol. 98, 97-113 (1976).
49. P. Perzyna, Constitutive modeling of dissipative solids for postcritical behavior and fracture. ASME J. Engng Mater. Technol. 106, 410-419 (1984).