Contact angle temperature dependence for water droplets on practical aluminum surfaces

International Journal of Heat and Mass Transfer

Volumn 40, Issue 5, 1997, Pages 1017-1033

  Bernardin, John D ^a   Mudawar, Issam ^a   Walsh, Christopher B ^a   Franses, Elias I ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; CONTACT ANGLE; CORRELATION METHODS; ELLIPSOMETRY; MATHEMATICAL MODELS; PRESSURE VESSELS; SCANNING ELECTRON MICROSCOPY; THERMAL EFFECTS;

PRACTICAL ALUMINUM SURFACES; WATER DROPLETS;

HEAT TRANSFER;

EID: 0031103999     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/0017-9310(96)00184-6     Document Type: Article

References (45)

1. Bernardin, J. D., Intelligent heat treatment of aluminum alloys: material, surface roughness, and droplet-surface interaction characteristics. Masters Thesis, Purdue University, West Lafayette, IN, 1993.
2. Bernardin, J. D. and Mudawar, I., Validation of the quench factor technique in predicting hardness in heat treatable aluminum alloys. International Journal of Heat & Mass Transfer, 1995, 38, 863-873.
3. Bartell, F. E. and Smith, J. T., Alteration of surface properties of gold and silver as indicated by contact angle measurements. Journal of Physical Chemistry, 1953, 57, 165-172.
4. Trevoy, D. J. and Johnson, H. Jr., The water wettability of metal surfaces. Journal of Physical Chemistry, 1958, 62, 833-837.
5. Erb, R. A., Wettability of metals under continuous condensing conditions. Journal of Physical Chemistry, 1965, 69, 1306-1309.
6. Bewig, K. W. and Zisman, W. A., The wetting of gold and platinum by water. Journal of Physical Chemistry, 1965, 69, 4238-4242.
7. White, M. L. and Drobek, J., The effect of residual abrasives on the wettability of polished gold surfaces. Journal of Physical Chemistry, 1966, 70, 3432-3436.
8. Erb, R. A., The wettability of gold. Journal of Physical Chemistry, 1968, 72, 2412-2417.
9. Bernett, M. K. and Zisman, W. A., Confirmation of spontaneous spreading by water on pure gold. Journal of Physical Chemistry, 1970, 74, 2309-2312.
10. Schrader, M. E., Ultrahigh-vacuum techiques in the measurement of contact angles. II. Water on gold. Journal of Physical Chemistry, 1970, 74, 2313-2317.
11. Boyes, A. P. and Ponter, A. B., Wettability of copper and polytetrafluoroethylene surfaces with water - the influence of environmental conditions. Chemical Engineering Technology, 1973, 45, 1250-1256.
12. Miller, C. A. and Neogi, P., Interfacial Phenomena. Marcel Dekker, New York 1985.
13. Dussan, E. B. V., On the spreading of liquids on solid surfaces: static and dynamic contact lines. In Annual Review of Fluid Mechanics, Vol. 11, ed. M. Van Dyke, J. V. Wehausen and J. L. Lumley. Annual Reviews, Palo Alto, CA, 1979, pp. 371-400.
14. Adamson, A. W., Physical Chemistry of Surfaces. Wiley, New York, 1982.
15. Good, R. J., Contact angles and the surface free energy of solids. In Surface and Colloid Science, Vol. 11, ed R. J. Good and R. R. Stromberg. Plenum Press, New York, 1979, pp. 1-29.
16. Berg, J. C., Wettability. Marcel Dekker, New York, 1993.
17. Hsu, Y. Y., On the size range of active nucleation cavities on a heating surface. ASME Journal of Heat Transfer, 1962, 84, 207-213.
18. Han, C.-Y. and Griffith, P., The mechanism of heat transfer in nucleate pool boiling - Part I. International Journal of Heat & Mass Transfer, 1965, 8, 887-904.
19. Johnson, M. A. Jr, De La Peria, J. and Mesler, R. B., Bubble shapes in nucleate boiling. AIChE Journal, 1966, 12, 344-348.
20. Mikic, B. B. and Rohsenow, W. M., Bubble growth rates in non-uniform temperature field. In Progress in Heat and Mass Transfer Vol. 2, ed. T. F. Irvine Jr, W. E. Ibele, J. P. Hartnet. and R. J. Goldstein. Pergamon Press, New York, 1969, pp. 283-293.
21. Diesselhorst, T., Grigull, U. and Hahne, E., Hydrodynamic and surface effects on the peak heat flux in pool boiling. In Heat Transfer in Boiling, ed. E. Hahne and U. Grigull, Hemisphere, Washington, 1977, pp. 99-135.
22. Chowdhury, S. K. R. and Winterton, R. H. S., Surface effects in pool boiling. International Journal of Heat & Mass Transfer, 1985, 28, 1881-1888.
23. Maracy, M. and Winterton, R. H. S., Hysteresis and contact angle effects in transition pool boiling of water. International Journal of Heat & Mass Transfer, 1988, 31, 1443-1449.
24. Unal, C., Daw, V. and Nelson, R. A., Unifying the controlling mechanisms for the critical heat flux and quenching: the ability of liquid to contact the hot surface. ASME Journal of Heat Transfer, 1992, 114, 972-982.
25. Carey, V. P., Liquid-Vapor Phase Change Phenomena: an Introduction to the Thermophysics of Vaporization and Condensation Processes in Heat Transfer Equipment. Hemisphere, New York, 1992.
26. Olek, S., Zvirin, Y. and Elias, E., The relation between the rewetting temperature and the liquid-solid contact angle. International Journal of Heat & Mass Transfer, 1988, 31, 898-902.
27. Jones, J. B. and Adamson, A. W., Temperature dependence of contact angle and of interfacial free energies in the naphthalene-water-air system. Journal of Physical Chemistry, 1968, 72, 646-650.
28. Petke, F. D. and Ray, B. R., Temperature dependence of contact angles of liquids on polymeric solids. Journal of Colloid Interface Science, 1969, 31, 216-227.
29. Neumann, A. W., Haage, G. and Renzow, D., The temperature dependence of contact angles of polytetrafluoroethylene/N-alkanes. Journal of Colloid Interface Science, 1971, 35, 379-385.
30. Tadros, M. E., Hu, P. and Adamson, A. W., Adsorption and contact angle studies I. Water on smooth carbon, linear polyethylene, and stearic acid-coated copper. Journal of Colloid Interface Science, 1974, 49, 184-195.
31. Neumann, A. W., Harnoy, Y., Stanga, D. and Rapacchietta, A. V., Temperature dependence of contact angles on polyethylene terephthalate. In Colloid and Interface Science Vol. 3, ed. M. Kerker. Academic Press, New York, 1976, pp. 301-312.
32. Budziak, C., Vargha-Butler, E. I. and Neumann, A. W., Temperature dependence of contact angles on elastomers. Journal of Applied Polymer Science, 1991, 42, 1959-1964.
33. Ponter, A. B. and Boyes, A. P., Wettability of copper and polytetrafluoroethylene surfaces with water - the influence of environmental conditions. Chemical Engineering Technology, 1973, 45, 1250-1256.
34. Schonhorn, H., Dependence of contact angles on temperature: polar liquids on polypropylene. Journal of Physical Chemistry, 1966, 70, 4086-4087.
35. Adamson, A. W., Potential distortion model for contact angle and spreading II. Temperature dependent effects. Journal Colloid Interface Science, 1973, 44, 273-281.
36. Neumann, A. W. and Good, R. J., Techniques of measuring contact angles. In Surface and Colloid Science, Vol. 11, ed. R. J. Good and R. R. Stromberg. Plenum Press, New York, 1979, pp. 31-91.
37. Nock, J. A., Properties of commercial wrought alloys. In Aluminum: Properties and Physical Metallurgy, ed. J. E. Hatch. Americal Society of Metals, Metals Park, Ohio, 1984, p. 351.
38. Dardas, Z., XPS characterization of heat-treated aluminum alloys. Ph.D. thesis, Purdue University, West Lafayette, IN, 1993.
39. Azzam, R. M. A. and Bashara, N. M., Ellipsometry and Polarized Light. North Holland, Amsterdam, 1979.
40. Palik, E. D., Handbook of Optical Constants of Solids. Academic Press, Florida, 1985.
41. Elliott, T. A. and Ford, D. M., Dynamic contact angles, part 7 - impact spreading of water drops in air and aqueous solution of surface active agents in vapor on smooth paraffin wax surfaces. Journal of the Chemical Society, Faraday Transactions I, 1972, 9, 1814-1823.
42. Eckert, E. R. G. and Drake, R. M., Analysis of Heat and Mass Transfer. McGraw-Hill, New York, 1972.
43. Jasper, J. J., The surface tension of pure liquid compounds. Journal of Physical Chemistry Reference Data, 1972, 1, 841-1010.
44. Hartland, S. and Hartley, R. W., Axisymmetric Fluid-Liquid Interfaces. Elsevier, New York, 1976.
45. Lai, C. L., Harwell, J. H., O'Rear, E. A., Komatsuzaki, S., Arai, J., Nakakawaji, T. and Ito, Y., Adsorption isotherms of perfluorocarbon surfactants from aqueous and non-aqueous solutions and friction measurements of perfluorosurfactant-adsorbed alumina. In Colloid and Surfaces A: Physicochemical and Engineering Aspects, Vol. 104. Elsevier, Amsterdam, 1995, pp. 231-241.