High current density ion implantation and its application to improve the wear resistance of ferrous materials

Wear

Volumn 203-204, Issue , 1997, Pages 596-607

  Byeli, A V ^a   Kukareko, V A ^a   Lobodaeva, O V ^a   Wilbur, P J ^b   Davis, J A ^b  

^a Physico Technical Institute   (Belarus)

^b Engineering Research Center and Hydraulics Laboratory   (United States)

Author keywords

Ion implantation; Iron; Nitrogen; Steel

Indexed keywords

AMORPHIZATION; ELECTRON MICROSCOPY; FRICTION; ION IMPLANTATION; IRON; NITROGEN; OPTICAL MICROSCOPY; PRECIPITATION (CHEMICAL); SOLID SOLUTIONS; STEEL; SURFACE STRUCTURE; X RAY DIFFRACTION ANALYSIS;

HIGH CURRENT DENSITY ION IMPLANTATION; SURFACE HARDNESS MEASUREMENTS;

WEAR RESISTANCE;

ALLOYS; FRICTION; HARDNESS; ION IMPLANTATION; WEAR RESISTANCE;

EID: 0031103837     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07420-0     Document Type: Article

References (30)

1. J.R. Conrad, J.L. Radtke, R.A. Dodd, F.J. Worzala and N.C. Tran, Plasma source ion-implantation for surface modification of materials, J. Appl. Phys., 62 (1987) 4591-4596.
2. J.N. Matossian, J.J. Vajo, J.A. Wysocki and M.E. Bellon, Plasma ion implantation (PII) to improve the wear life of tungsten carbide drill bits used in printed wiring board (PWB) fabrication, Surf. Coatings Technol., 62 (1993) 595-599.
3. A.V. Byeli, S.K. Shykh and V.V. Khatko, Friction and wear of high speed steel doped with low energy nitrogen ions, Wear, 159 (1992) 185-190.
4. A.V. Byeli, O.V. Lobodaeva, S.K. Shykh and V.A. Kukareko, Microstructural variations and tribology of molybdenum-type high speed steel ion implanted with high current density nitrogen beams, Wear, 181-183 (1995) 632-637.
5. A.V. Byeli, V.A. Kukareko, O.V. Lobodaeva and S.K. Shykh, Phase and structural transformations in iron-base alloys irradiated with low-energy nitrogen ions at high current densities, Phys. Metals Metall., 80 (1995) 657-667.
6. W.S. Sampath and P.J. Wilbur, Broad beam ultrahigh current density ion implantation, Mater. Res. Soc. Symp. Proc., 93 (1987) 349-359.
7. D.L. Williamson, R. Wei and P.J. Wilbur, Effects of rapid, high-dose, elevated temperature ion implantation on the microstructure and tribology of ferrous surfaces, Nucl. Instrum. Meth. Phys. Res., B56/57 (1991) 625-629.
8. D.L. Williamson, O. Ozturk, R, Wei and P.J. Wilbur, Metastable phase formation and enhanced diffusion in f.c.c. alloys under high dose, high flux nitrogen implantation at high and low ion energies, Surf. Coatings Technol., 65 (1994) 15-23.
9. P.J. Wilbur and B.W. Buchholtz, Engineering tribological surfaces by ion implantation, Surf. Coatings Technol., 79 (1996) 1-8.
10. A.V. Byeli, V.A. Kukareko, O.V. Lobodaeva, S.K. Shykh, P.J. Wilbur and J.A. Davis, Structure and wear resistance of 20X13 steel ion implanted with nitrogen at a high beam current density, Surf. Coatings Technol. in press.
11. J. Jagielski, N. Moncoffre, G. Marest, L. Thome, A.J. Barcz, G. Gawlik and W. Rosinski, Radiation-induced segregation of implanted into iron, J. Appl. Phys., 75 (1) (1994) 153-160.
12. J. Jagielski, N. Moncoffre, G. Marest and S. Fayeulle, Migration of nitrogen implanted into iron induced by the presence of a buried carbon layer, J. Appl. Phys., 76 (9) (1994) 5132-5135.
13. N.Q. Lam and Wiedersich, Bombardment-induced segregation and redistribution, Nucl Instrum. Meth. Phys. Res., B18 (1987) 471.
14. Le Claire, Solute diffusion in dilute alloys, J. Nucl. Mater., 69/70 (1978) 70.
15. Yu.N. Devyatko, O.V. Tapinskaya, Effect of Free Surface on the Distribution of Point Defects in Metals, Surf. Phys. Chem. Mech., 12 (1991) 92-97 (in Russian).
16. Annual Book of ASTM Standards, Designation G77-83, v.03.02, ASTM, Philadelphia, PA, 1983, pp. 453-469.
17. Powder Diffraction File Data Cards, Inorganic Section, Sets 1-34, Swarthmore, PA, 1948-1984.
18. M.L. Bernshtein (ed.), Metallography and Thermal Treatment of Steels, Handbook, Part 1.1, Metallurgiya, Moscow, 1991, p. 353 (in Russian).
19. H.J. Goldshmidt, Interstitial Alloys, London, Butterworth (1967) 424.
20. Yu.M. Lakhtyn, Ya.D. Kogan, G.I. Shpis and Z. Bemer, Theory and Technology of Nitriding Processes, Metallurgiya, Moscow, 1991, p. 319 (in Russian).
21. A.V. Byeli, Ion implantation and the creation of tribotechnical materials, in V.A. Belyi, K.C. Ludema and N.K. Myshkin (eds.), Tribology in the USA and the Former Soviet Union: Studies and Applications, Allerton Press, New York, 1994, pp. 227-242.
22. V.A. Shulov, A.E. Strygin and A.M. Sulima, Ion beam surface layer modification and erosion properties of EP-866sh steel and the EP718Id alloy, Sov. J. Friction Wear, 11 (1990) 56-65.
23. S.P. Shepard and N.P. Suh, The effects of ion-implantation on friction and wear of metals, Trans. ASME, 109 (1982) 32-43.
24. A.V. Byeli, G.D. Karpenko and N.K. Myshkin, Structure and Methods to Create Wear Resistant Surface Layers, Mashinostroenie, Moscow, 1991, p. 206 (in Russian).
25. A.V. Byeli, O.V. Lobodaeva, S.K. Shykh and V.A. Kukareko, Solid-state amorphization of a tool steel by high-current-density, low-energy nitrogen ion implantation, Nucl. Instrum. Meth. Phys. Res., B 103 (1995) 533-536.
26. A. Inoua, T. Masumoto, S. Akava and T. Iwadachi, Mechanical properties and thermal stability of new-type high-carbon amorphous steels, Proc. 3rd Int. Conf. on Rapid Quenching of Metals, Metal Soc., London, 1978.
27. C.C. Koch, O.B. Cavin, C.G. Mc Kamey and J.O. Scarbrough, Preparation of Amorphous Ni60Nb40 by Mechanical Alloying, Appl. Phys. Lett., 43 (1983) 1017.
28. R.B. Schwarz and W.L. Johnson, Amorphous Alloy by Solid-State Reaction of the Pure Polycrystalline, Metals, Phys. Rev. Lett., 51 (1983) 415.
29. P.L. Borona, O.G. Cerisola, C. Tosello and S. Tosto, in V. Ashworth, W.A. Grant and R.M. Procter (eds.), Ion Implantation into Metals, Pergamon Press, New York, 1982.
30. M.I. Goldshtein, C.V. Grachev and Y.G. Veksler, Special Steels, Metallurgiya, Moscow, 1985, p. 408 (in Russian).