Cyclic softening of the Ti-10V-2Fe-3Al titanium alloy

Materials Science and Engineering: A

Volumn 224, Issue 1-2, 1997, Pages 146-156

  Luquiau, D ^a   Feaugas, X ^a   Clavel, M ^a  

^a UNIVERSITÉ DE TECHNOLOGIE DE COMPIÈGNE   (France)

Author keywords

Cyclic softening; Low cycle fatigue behaviour; Titanium alloys; Transmission electron microscopy

Indexed keywords

AGING OF MATERIALS; CRYSTAL ORIENTATION; DEFORMATION; DISLOCATIONS (CRYSTALS); FATIGUE OF MATERIALS; KINEMATICS; MECHANICAL TESTING; METALLOGRAPHIC MICROSTRUCTURE; STRAIN; STRESSES; TRANSMISSION ELECTRON MICROSCOPY;

CYCLIC SOFTENING; HOMOGENEOUS PRISMATIC SLIP; HOMOGENIZATION; LOW CYCLE FATIGUE BEHAVIOUR; PLASTIC STRAIN CONTROL; TITANIUM VANADIUM IRON ALUMINUM ALLOY;

TITANIUM ALLOYS;

EID: 0031100488     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0921-5093(96)10531-1     Document Type: Article

References (51)

1. M.H. Campagnac, Ph.D. Thesis, Université Pierre et Marie Curie, Paris, France, 1988.
2. G.W. Kuhlman and T.B. Gurganus, Met. Progr., July (1980) 30.
3. R.R. Boyer and G.W. Kuhlman, Metall. Trans. A, 18 (1987) 2095.
4. G.W. Kuhlman and R. Pishko, Titanium '80 Sci. Technol., 1980, Vol. 1, p. 469.
5. R.R. Boyer, D. Eylon and F.H. Froes, Titanium Sci. Technol. '84, 1984, Vol. 2, p. 1307.
6. C.C. Chen and R.R. Boyer, J. Met., July (1979) 33.
7. R.S. Carey, R.R. Boyer and H.W. Rosenberg, Titanium Sci. Technol. '84, 1984, Vol. 2, p. 1261.
8. R.R. Boyer, J. Met., Mar. (1980) 61.
9. G.W. Kuhlman, A.K. Chakrabarti, T.L. Yu, R. Pishko and G.T. Terlinde, TMS-AIME Ann. Meet., Feb. 1987, p. 171.
10. D.P. Davies, Titanium '92 Sci. Technol., 1993, Vol. 2, p. 1851.
11. Y. Mahajan and H. Margolin, Metall. Trans. A, 13 (1982) 257.
12. A.S. Beranger, X. Feaugas and M. Clavel, Mater. Sci. Eng., A172 (1993) 31.
13. X. Feaugas, Ph.D. Thesis, Université de Compiègne, France, 1994.
14. G.T. Terlinde, T.W. Duerig and J.C. Williams, Titanium '80 Sci. Technol., 1980, Vol. 2, p. 1571.
15. G.T. Terlinde, T.W. Duerig and J.C. Williams, Metall. Trans. A, 14 (1983) 2101.
16. R.R. Boyer and H.W. Rosenberg, Beta Titanium Alloys in the 1980s, 1983, p. 441.
17. P.J. Bania and S.D. Antolovich, Titanium Sci. Technol. '84, 1985, Vol. 4, p. 2305.
18. L. Handfield and J.I. Dickson, 2nd Int. Symp. Defects, Fracture Fatigue, 1983, p. 37.
19. G. Welsch and W. Bunk, Metall. Trans. A, 13 (1982) 889.
20. R. Stevenson and J.F. Breedis, Acta Metall., 23 (1975) 1419.
21. A.W. Bowen, 6th World Conf. Titanium, 1988, Vol. 1, p. 93.
22. G. Haicheng, G. Huifang, C. Shufen and C. Laird, Mater. Sci. Eng., A188 (1994) 23.
23. B.J. Marquardt, G.K. Scarr, J.C. Chesnutt, C.G. Rhodes and H.L. Fraser, 6th World Conf. Titanium, 1988, Vol. 2, p. 955.
24. H. Numakura, Y. Minonishi and M. Koiva, Scr. Metall., 20 (1986) 1581.
25. S. Naka, Ph.D. Thesis, Université d'Orsay (Paris Sud), Paris, France, 1983.
26. P.G. Partridge, Metall. Rev., 12 (1967) 169.
27. I.P. Jones and W.B. Hutchinson, Acta Metall., 29 (1981) 951.
28. Y. Minonishi, S. Morozumi and H. Yoshinaga, Scr, Metall., 16 (1982) 427.
29. A.H. Cottrell, Dislocations and Plastic Flow in Crystals, Oxford University Press, Oxford, 1953, p. 111.
30. W. Prager, J. Appl. Phys., 20 (1949) 235.
31. J.I. Dickson, L. Handfield and G. L'Esperance, Mater. Sci. Eng., 60 (1983) L3-L7.
32. A. Abel and Y.S. Chung, Scr. Metall., 13 (1979) 907.
33. J.I. Dickson, L. Handfield and G. L'Esperance, Metall. Trans. A, 16 (1985) 694.
34. J. Polak, M. Klesnil and J. Helesic, Scr. Metall., 13 (1979) 847.
35. D. Kuhlmann-Wilsdorf and C. Laird, Mater. Sci. Eng., 37 (1970) 111.
36. A. Barry, P. Roumagnac, M. Clavel and P. Bertrand, 3rd Int. Conf. Aluminium Alloys, 1992, Vol. 1, p. 628.
37. V. Ferney, L. Hautefeuille and M. Clavel, Mem. Etudes Sci. Rev. Metall., July (1991) 441.
38. J.I. Dickson, J. Boutin and L. Handfield, Mater. Sci. Eng., 64 (1984) L7.
39. P. Pilvin, Ph.D. Thesis, Université Pierre et Marie Curie, Paris VI, France, 1990.
40. SiDoLo V.2.3, Ecole Nationale Supérieure des Mines de Paris, Evry, France, 1993.
41. H. Mughrabi, Acta Metall., 31 (1983) 1367.
42. X. Feaugas and M. Clavel, Le Zirconium - Journées d'Etudes Propriétés-Microstructures, Les Editions de Physique, Paris, 1996, p. 279.
43. H.M. Kim, H.G. Paris and J.C. Williams, Titanium '80 Sci. Technol., 1980, Vol. 3, p. 1825.
44. J.C. Williams and G. Lütjering, Titanium '80 Sci. Technol., 1980, Vol. 1, p. 671.
45. S. Farenc, D. Caillard and A. Couret, Acta Metall. Mater., 41 (1990) 2701.
46. V.I. Starsev, V.N. Kovaleva and V.A. Moskalenko, 5th Int. Conf. Strength of Metals and Alloys, 1979, Vol. 1, p. 169.
47. S. Naka and A. Lasalmonie, Mater. Sci. Eng., 55 (1982) 19.
48. X. Feaugas, P. Pilvin and M. Clavel, Le Zirconium - Journées d'Etudes Propriétés-Microstructures, Les Editions de Physique, 1996, p. 99.
49. M. Clavel and X. Feaugas, Multiaxial fatigue and design, Mech. Eng. Publ., 1996.
50. P. Franciosi, M. Berveiller and A. Zaoui, Acta Metall., 28 (1980) 273.
51. A. De Crecy, A. Bourret, S. Naka and A. Lasalmonie, Philos. Mag. A, 47 (1983) 245.