The relation between in situ and laboratory rock properties used in numerical modelling

International journal of rock mechanics and mining sciences & geomechanics abstracts

Volumn 34, Issue 2, 1997, Pages 289-297

  Mohammad, N ^a   Reddish, D J ^a   Stace, L R ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE STRENGTH; ELASTIC MODULI; MATHEMATICAL MODELS; STIFFNESS; TENSILE STRENGTH;

ROCK MASS PROPERTIES;

ROCK MECHANICS;

IN SITU TESTING; LAB TEST; LABORATORY TEST; MECHANICAL PROPERTIES; ROCK MASS RESPONSE; ROCK MECHANICS; STIFFNESS; STRENGTH;

EID: 0031080444     PISSN: 01489062     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0148-9062(96)00060-5     Document Type: Article

References (44)

1. Bardet J. Scott R.F. Seismic stability of fractured rock using distinct element method Eileen Ashworth Proceedings of the 26th US Symposium on Rock Mechanics 1985 139 149
2. Balkema/Rotterdam Adams D.J. Gurtunca R.G. Jager A.J. Gay N.C. Assessment of a new mine layout incorporating concrete pillars as regional support Innovation in Mining Backfill Technology 1989 199 208
3. Yao X.L. Reddish D.J. Whittaker B.N. Non-linear finite element analysis of surface subsidence arising from inclined seam extraction Int. J. Rock Mech. Min. Sci. & Geomech. Abstr 30 4 1993 431 441
4. Balkema/Rotterdam Rafiield M.P. James J.V. Humphreys I. Isaac A.K. Model input parameter selection through instrumentation and back analysis of large excavation failure in a deep level South African gold mine Bawden Archibald Innovative Mine Design for the 21st Century 1993 641 652
5. Butkovich T.R. Patrick W.C. Thermomechanical modelling of the spent fuel test-climax. In Rock Mechanics: Key to Energy Production H.L. Hartman Proceeding of the 27th U.S. Symposium on Rock Mechanics 1986 SME New York 898 905
6. Harrell T.R. Deere D.U. The influence of rock behaviour on the rocky mountain pumped storage project concrete tunnel lining analysis H.L. Hartman Rock Mechanics: Key to Energy Production, Proceeding of the 27th U.S. Symposium on Rock Mechanics 1986 SME 954 960
7. Peng S.S. Matsuki K. Su W.H. 3-D structural analysis of longwall panels D.A. Summers Rock Mechanics: Proceedings of the 21st U.S. Symposium on Rock Mechanics 1980 44 56
8. Daniel W.H.S. Finite element modelling of subsidence induced by underground coal mining: The influence of material nonlinearity and shearing along existing planes of weakness S.S. Peng Proceedings of the 10th International Conference on Ground Control in Mining 1991 West Virginia University 287 300
9. Matsui K. Control of road way closure in underground coal mines by side wall weakening technique S.S. Peng Proceedings of the 9th International Conference on Ground Control in Mining 1900 West Virginia University 58 63
10. Teng D.H. Peng S.S. Mine pillar stability analysis using FEM methods-Two case studies S.S. Peng Proceedings of the 9th International Conference on Ground Control in Mining 1990 West Virginia University WV 88 89
11. Riefengerg J. Donato D. A test of predictive numerical models to simulate entry design changes using field measurements from a longwall mining gateroa S.S. Peng Proceedings of the 12th International Conference on Ground Control in Mining 1993 West Virginia University WV 84 91
12. Trueman R. An evaluation of strata support techniques in dual life gateroads Ph.D. Thesis 1988 University of Wales WV
13. Hasenfus G.J. Su D.W.H. Comprehensive integrated approach for longwall development design A.T. Innacchione C. Mark R.C. Repsher R.J. Tuchma C.C. Jones Proceedings of the Workshop on Coal Pillar Mechanics and Design 1992 USBM Information Circular IC 9315 Cardiff 225 237
14. Lloyd P.W. An investigation of the influence of mining method upon rock mass behaviour in stratified deposits Ph.D. Thesis 1995 University of Wales
15. Justification of the finite element technique for non-linear modelling Interim Report to British Coal November, 1988 Golder Associates (UK) Ltd. Consulting Geotechnical and Mining Engineers Cardiff
16. Antikainen J. Simonen A. Simula K. Rock properties and modelling parameters in 3D modelling, A case study H. Kuula T. Posa V. Suominen Aggregate 1992 and the Finnish Symposium on Rock Mechanics 1992 Tutkimusrapoatti-Research Report TKK-KAL-All 1992 VI/1(11) VI/11(11)
17. British Coal Geotechnical Services, Asfordby Mine, Internal Report, 1991.
18. Yacoub N. Dar-hao C. Musharraf Z. Application of nonlinear finite element method in prediction of ground subsidence due to underground mining H.S. Mitri Proceedings of the First Canadian Symposium on Numerical Modelling Applications in Mining and Geomechanics Montreal, Quebec, 27–30 March 1993 140 149
19. Tang D.H.Y. Peng S.S. Structural analysis of mine pillars using finite element method-A case study Mining Engng 1988 893 897
20. Chen G. Karmis M. Haycocks C. Yield pillar design for ground stability E. Topuz J. Lucas Proceedings of the Fifth Annual Workshop Generic Mineral Technology Center Mine System Design and Ground Control 1987 Tuscaloosa 56 66
21. Tuscaloosa, Alabama Pariseau W.G. Duan F. A three dimensional finite element analysis of the VCR study stope at the Himestake mine E. Topuz J.R. Lucas Proceedings of the Fifth Annual Workshop Generic Mineral Technology Center Mine System Design and Ground Control 1987 67 78
22. Kidybinski A. Babcock C.O. Stress distribution and rock fracture zone in the roof of a longwall face in a coal mine Rock Mechanics Vol. 5 1975 1 19
23. Follington I.L. Geotechnical Influences upon Longwall Mining Ph.D. thesis 1988 University of Wales Alabama
24. University of Nottingham, U.K., Unpublished Internal Report, 1995.
25. Agioutantis Z. Karmis M. A study of roof caving in the Eastern U.S. coalfields S.S. Peng Proceedings of the 5th International Conference on Ground Control in Mining 1986 West Virginia University Cardiff 134 146
26. Balkema/Rotterdam Craig M.S. Duncan Fama M.E. Trueman R. Three-dimensional elasto-plastic analysis of coal pillars for highwall mining Nelson Laubach Proceedings of the First North American Rock Mechanics Symposium The University of Texas at Austin, 1–3 June 1994 999 1006
27. Groth T. Jonasson P. Application of the BEFEM code to the Nasliden mine models O. Stephansson M.J. Jones Proceedings of the Conference on the Application of Rock Mechanics to Cut and Fill Mining The University of Lulea, Sweden, 1–3 June, 1980 1981 The Institute of Mining and Metallurgy WV 226 232
28. Pariseau W.G. Finite-element method applied to cut and fill mining O. Stephansson M.J. Jones Proceedings of the Conference on the Application of Rock Mechanics to Cut and Fill Mining The University of Lulea, Sweden, 1–3 June, 1980 1981 The Institute of Mining and Metallurgy 284 292
29. Chan S.S.M. Problems of prediction of ground stability in cut and fill operation in deep vein mines with finite element method O. Stephansson M.J. Jones Proceedings of the Conference on the Application of Rock Mechanics to Cut and Fill Mining The University of Lulea, Sweden, 1–3 June, 1980 1981 The Institute of Mining and Metallurgy 293 299
30. Sinclair T.J.E. Shillabeer J.H. Herget G. Application of a computer model to the analysis of rock-backfill interaction in pillar recovery operation O. Stephansson M.J. Jones Proceedings of the Conference on the Application of Rock Mechanics to Cut and Fill Mining The University of Lulea, Sweden, 1–3 June, 1980 1981 The Institute of Mining and Metallurgy 339 351
31. Saari K. Ylinen A. Stability calculations at Rautuvaara mine, Finland O. Stephansson M.J. Jones Proceedings of the Conference on the Application of Rock Mechanics to Cut and Fill Mining The University of Lulea, Sweden. 1–3 June, 1980 1981 The Institute of Mining and Metallurgy 352 361
32. Yu Y.S. Betournay M.C. Larocque G.E. Thivierge S. Pillar and stope stability analysis of the Niobec Mine using three-dimensional finite element techniques J.H. Curran Proceedings of 15th Canadian Rock Mechanics Symposium, Rock Engineering for Underground Excavation 1988 99 108
33. Mitri H.S. Edrissi R. Henning J. Finite element modelling of cable-bolted stopes in hard rock underground mines Presented at the SME Annual Meeting Albuquerque, New Mexico, 14–17 February Paper Number 94-116 1994
34. Hsiung S.M. Peng S.S. First caving and its effects-A case study S.S. Peng Proceedings of the 4th International Conference on Ground Control in Mining 1985 West Virginia University 83 93
35. Tang D.H. Peng S.S. Massive pillar failure-Two case studies S.S. Peng Proceedings of the 4th International Conference on Ground Control in Mining 1985 West Virginia University WV 117 126
36. Peng S.S. Hsiung S.M. I.W. Farmer Proceedings of the Symposium on Strata Mechanics Newcastle upon Tyne, 5–7 April Development of roof control criteria for longwall mining, development in geotechnical engineering, Vol. 32, Strata Mechanics 1982 48 51
37. Balkema/Rotterdam Majcherczyk T. Tajdus A. Arch support enhancement of close-to-wall gangways by roof bolting method Z. Rakowski Proceedings of the International Conference Geomechanics 93 Hradec, Ostravs, Czech Republic, 28–30 September 1993 1994 97 103
38. Bieniawski Z.T. Determination of rock mass deformability: Experience from case histories Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 15 1978 237 247
39. Serafim L.J. Pereira P.J. Consideration on the geomechanical classification of Bieniawski Proceedings of the International Symposium on Engineering Geology and Underground Construction Lisbon, Portugal, V2 1983 33 42
40. Nicholson G.A. Bieniawski Z.T. A nonlinear deformation modulus based on rock mass classification Int. J. Min. & Geological Engng 8 1990 181 202
41. Chileshe P.R.K. An evaluation of stress development around mining excavation in the Zambian copperbelt Ph.D. thesis 1992 University of Wales WV
42. Hoek E. Brown E.T. Underground Excavation in Rock 1980 Instn. Min. Metall. Cardiff
43. Hoek E. Brown E.T. The Hoek-Brown failure criterion-a 1988 update J.H. Curran Proceedings of 15th Canadian Rock Mechanics Symposium, Rock Engineering for Underground Excavations 1982 31 38
44. Wilson A.H. A method of estimating the closure and strength of lining required in drivages surrounded by a yield zone Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 17 1980 349 355