A systems theory approach to modelling of cutting temperature with experimental identification

International Journal of Machine Tools and Manufacture

Volumn 37, Issue 2, 1997, Pages 149-158

  D'Errico, G E ^a  

^a CNR   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING TOOLS; MATHEMATICAL MODELS; PARAMETER ESTIMATION; PIECEWISE LINEAR TECHNIQUES; PROCESS CONTROL; REAL TIME SYSTEMS; SYSTEM THEORY; TEMPERATURE; THERMAL CONDUCTIVITY; THERMOCOUPLES; TRANSFER FUNCTIONS; WEAR OF MATERIALS;

CUTTING SPEEDS; CUTTING TEMPERATURE; EXPERIMENTAL IDENTIFICATION; REAL TIME CONTROL; TOOL WEAR;

METAL CUTTING;

EID: 0031077874     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0890-6955(96)00053-3     Document Type: Article

References (27)

1. B.N. Colding, A tool-temperature/tool-life relationship covering a wide range of cutting data, CIRP Ann. 40(1), 35 (1991).
2. L.V. Colwell, Cutting temperature versus tool wear, CIRP Ann. 24(1), 73 (1975).
3. A. Donovan and W. Scott, On-line monitoring of cutting tool wear through tribo e.m.f. analysis. Int. J. Mach. Tools Manufact. 35(11), 1523 (1995).
4. P. Mathew, Use of predicted cutting temperatures in determining tool performance, Int. J. Mach. Tools Manufact. 29(4), 481 (1989).
5. O.D. Prins, The influence of wear on the temperature distribution at the rake face, CIRP Ann. 19, 579 (1971).
6. A.H. Redford, B. Mills and S. Akhtar, Temperature-tool life relationships for resulphurised low carbon free machining steels, CIRP Ann. 25(1), 89 (1976).
7. P.K. Venuvinod, W.C. Lau and C. Rubenstein, Analysis of the life of controlled contact tools via flank contact temperature estimation, CIRP Ann. 33(1), 55 (1984).
8. Z. Pálmai, Cutting temperature in intermittent cutting, Int. J. Mach. Tools Manufact. 27(2), 261 (1987).
9. G. Barrow, A review of experimental and theoretical techniques for assessing cutting temperatures, CIRP Ann. 22(2), 203 (1973).
10. G.F. Micheletti, W. König and H.R. Victor, In process tool wear sensors for cutting operations, CIRP Ann. 25(2), 483 (1976).
11. J. Tlusty and G.C. Andrews, A critical review of sensors for unmanned machining, CIRP Ann. 32(2), 563 (1983).
12. L. Dan and J. Mathew, Tool wear and failure monitoring for turning - a review, Int. J. Mach. Tools Manufact. 30(4), 579 (1990).
13. G. Byrne, Thermoelectric signal characteristics and average interfacial temperatures in the machining of metals under geometrically defined conditions, Int. J. Mach. Tools Manufact. 27(2), 215 (1987).
14. K. Uehara, M. Sakurai and T. Ikeda, On the problem of thermoelectric current in metal cutting, CIRP Ann. 41(1), 75 (1992).
15. V.A. Ostafiev, A.A. Cherniavskaya and V.A. Sinopalnikov, Numerical calculation on non-steady-state temperature fields in oblique cutting, CIRP Ann. 32(1), 43 (1983).
16. A.H. Qureshi and F. Koenigsberger, An investigation into the problem of measuring the temperature distribution on the rake face of a cutting tool, CIRP Ann. 14, 189 (1966).
17. S. Rossetto and U. Koch, An investigation of temperature distribution on tool flank surface, CIRP Ann. 19, 551 (1971).
18. A.J.R. Smith and E.J.A. Armarego, Temperature prediction in orthogonal cutting with a finite difference approach, CIRP Ann. 30(1), 9 (1981).
19. H.T. Young and T.L. Chow, Modelling of tool-chip interface temperature distribution in metal cutting. Int. J. Mech. Sci. 36(10), 931 (1994).
20. O.E. D'Errico, An adaptive approach to tool wear sensing and decay rate control in autonomous manufacturing, J. Mech. Work. Technol. 20, 3 (1989).
21. G. E. D'Errico, L. Settineri and G. Rutelli, Turning process monitoring and modelling for adaptive control simulation, in Proc. 10th Int. CIRP Conf. on Computer-Aided Process Engineering (CAPE), (edited by U. La Commare and J.A. McGeough), Palermo, Vol. 1, p. 64, 7-9 June (1994).
22. D.W. Yen and P.K. Wright, Adaptive control in machining - a new approach based on the physical constraints of tool wear mechanisms, J. Engng Ind. 105, 31 (1983).
23. H.K. Tönshoff, J.P. Wulsberg, H.J.J. Kals, W. König and C.A. Van Luttervelt, Development and trends in monitoring and control of machining processes, CIRP Ann. 37(2), 611 (1988).
24. K. J. Åström and B. Wittenmark, Adaptive Control. Addison-Wesly, Reading, MA (1989).
25. J.G. Chow and P.K. Wright, On-line estimation of tool-chip interface temperatures for a turning operation, J. Engng Ind. 110, 56 (1988).
26. G. F. Micheletti, Il taglio dei metalli, in Tecnologia Meccanica, Vol. 1, Chap. 26. UTET, Torino (1968).
27. K. J. Åström and B. Wittenmark, Computer Controlled Systems, Chaps 3, 13. Prentice-Hall, Englewood Cliffs, NJ (1984).