Development of a pinned wall sensor using cobalt-rich, near-zero magnetostrictive amorphous alloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 2, 1997, Pages 423-434

  Kim, C K ^a,b   O'Handley, R C ^a,c  

^a MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

^b Hanyang University   (South Korea)

^c Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; COBALT ALLOYS; CRYSTAL LATTICES; CRYSTAL MICROSTRUCTURE; CRYSTALLINE MATERIALS; INTERFACES (MATERIALS); MAGNETIC ANISOTROPY; MAGNETIC DOMAINS; MAGNETIC HYSTERESIS; MAGNETOSTRICTION; OXYGEN; SENSORS;

DOMAIN WALL PINNING; PINNED WALL SENSORS;

AMORPHOUS ALLOYS;

EID: 0031076210     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0143-1     Document Type: Article

References (44)

1. R. Boll, H.R. Hilzinger, and H. Walimont: in Glassy Metals: Magnetic, Chemical and Structural Properties, R. Hasegawa, ed., CRC Press, Boca Raton, FL, 1983, pp. 183-201.
2. M.N. Chandrasekharaiah: in Metallic Glasses: Production, Properties and Applications, T.R. Anantharaman, ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1984, pp. 269-92.
3. D. Raskin and C.H. Smith: in Amorphous Metallic Alloys, F.E. Luborsky, ed., Butterworth and Co., London, 1983, pp. 381-400.
4. R.C. O'Handley: J. Mater. Eng. Perform., 1993, vol. 2 (2), pp. 211-18.
5. H. Warlimont: in Rapidly Quenched Metals, S. Steeb and H. Warlimont, eds., Elsevier Science Publishers, Amsterdam, 1985, pp. 1599-1609.
6. K. Mohri: in Magnetic Properties of Amorphous Metals, A. Hemando, V. Madurga, M.C. Sanchez-Trujillo and M. Vazquez, eds., Elsevier Science Publishers, Amsterdam, 1987, pp. 360-66.
7. G. Herzer and H.R. Hilzinger: in Magnetic Properties of Amorphous Metals, 1987, pp. 354-59.
8. G.E. Fish: Proc. IEEE, 78 (6) (1990) 947-72.
9. F.E. Luborsky: in Amorphous Magnetism II, R.A. Levy and R. Hasegawa, eds., Plenum Press, New York, NY, 1977, pp. 345-46.
10. S. Chikazumi: in Physics of Magnetism, S. Chikazumi and S.H. Charap, eds., John Wiley & Sons, Inc., New York, NY, 1965, pp. 291-301 and pp. 497-98.
11. X.-Y. Xiong and K.-Y. Ho: J. Magn. Magn. Mater., 1991, vol. 94, pp. L29-L134.
12. R.C. O'Handley: Mater. Sci. Eng., B3 (1989) 365-69.
13. H. Sakakima, H. Senno, Y. Yanagiuchi, and E. Hirota, J. Appl. Phys., 52 (3) (1981) 2480-82.
14. K.-Y. Ho, X. Lu, and Q.-X. Ba: Mater. Sci. Eng., 99 (1988) 87-89.
15. C. Hargitai, C. Kopasz, S. Nemeth, and B. Albert: Mater. Sci. Eng., 1988, vol. 99, pp. 81-85.
16. H. Fujimori: in Amorphous Metallic Alloys, F.E. Luborsky, ed., Butterworth and Co., London, 1983, pp. 300-16.
17. G.-H. Tu and W.-R. Chen, Mater. Sci. Eng., 97 (1988) 329-32.
18. A. Siemko, J.F. Finowicki, L. Zaluski, and M. Kuzminski: Key Eng. Mater., 40 (1990) 119-24.
19. H. Atmani, F. Delaunay, J.M. Saiter, R. Krishnan, and P. Vigier: Mater. Lett., 24 (1995) 139-42.
20. R. Hasegawa: in Glassy Metals: Magnetic, Chemical and Structural Properties, R. Hasegawa, ed., CRC Press, Boca Raton, FL, 1983, pp. 163-82.
21. S. Chikazumi: in Physics of Magnetism, S. Chikazumi and S.H. Charap, eds., John Wiley & Sons, Inc., New York, NY, 1965, pp. 359-96.
22. S. Chikazumi and C.D. Graham, Jr.: in Magnetism and Metallurgy, A.E. Berkowitz and E. Kneller, eds., Academic Press, New York, NY, 1969, pp. 577-619.
23. B.D. Cullity: in Introduction to Magnetic Materials, B.D. Cullity, ed., Addison-Wesley, Reading, MA, 1972, pp. 357-76.
24. E.A. Nesbitt, R. Hasegawa, R.C. O'Handley, and M.O. Sullivan: J. Appl. Phys., 1980, vol. 51 (6), pp. 3328-29.
25. H. Fujimori, H. Monta, Y. Obi, and S. Ohta: in Amorphous Magnetism II, R.A. Levy and R. Hasegawa, eds., Plenum Press, New York, NY, 1977, pp. 393-402.
26. T. Fukunaga and K. Suzuki: Sci. Rep. Res. Inst. Tohoku Univ., A29 (1981) 153-57.
27. F.E. Luborsky and J.L. Walter: IEEE Trans. Magn., MAG-13 (1977) 953-56;
28. F.E. Luborsky and J.L. Walter: IEEE Trans. Magn., 1977, vol. MAG-13, pp. 1635-38.
29. J.J. Decker: IEEE Trans. Magn., MAG-14 (1978) 938-40.
30. F.E. Luborsky and J.L. Walter: Mater. Sci. Eng., 28 (1977) 77-80.
31. P. Allia and F. Vinai: IEEE Trans. Magn., MAG-14 (1978) 1050-53.
32. L.C. Feldman and J.W. Mayer: in Fundamentals of Surface and Thin Film Analysis, North-Holland, New York, NY, 1986, pp. 269-74.
33. J.P. Chevalier, Y. Calvayrac, A. Quivy, M. Harmelin, and J. Bigot: Acta Metall., 31 (3) (1983) 465-71.
34. S. Chang and W.H. Wade: J. Phys. Chem., 74 (12) (1970) 2484-88.
35. R.D. Heidenreich, E.A. Nesbitt, and R.D. Burbank: J. Appl. Phys., 30 (7) (1959) 995-1000.
36. E.A. Nesbitt and R.D. Heidenreich: J. Appl. Phys., 1959, vol. 30 (7), pp. 1000-03.
37. E.A. Nesbitt, R.D. Heidenreich, and A.J. Williams: J. Appl. Phys., 31 (5) (1960) 228S-229S.
38. E.A. Nesbitt, B.W. Batterman, L.D. Fullerton, and A.J. Williams: J. Appl. Phys., 36 (1965) 1235-36.
39. D.A. Porter and K.E. Easterling: in Phase Transformations in Metals and Alloys, Van Nostrand Reinhold Company, New York, NY, 1981, pp. 291-303.
40. C.J. Chien, R.F.C. Farrow, C.H. Lee, C.J. Lin, and E.E. Marinero: J. Magn. Magn. Mater. 1991, vol. 93, pp. 47-52.
41. C. Aroca, P. Sanchez, and E. Lopez: Phys. Rev. B, 1986, vol. 34, pp. 490-93.
42. R. Schafer, W.K. Ho, J. Yamasaki, A. Hubert, and F.B. Humphrey: IEEE Trans. Magn., 1991, vol. 27, pp. 3678-89.
43. W.K. Ho and F.B. Humphrey: J. Appl. Phys., 63 (8) (1988) 2944-46.
44. J. Yamasaki, K. Mohri, K. Watari, and K. Narita: IEEE Trans. Magn., 20 (1984) 1855-57.