-
1
-
-
51249173186
-
Optimization of Spray Quenching for Aluminum Extrusion, Forging, or Continuous Casting
-
T.A. Deiters and I. Mudawar, Optimization of Spray Quenching for Aluminum Extrusion, Forging, or Continuous Casting, J. Heat Treat., Vol 7, 1989, p 9-18
-
(1989)
J. Heat Treat.
, vol.7
, pp. 9-18
-
-
Deiters, T.A.1
Mudawar, I.2
-
2
-
-
0000503177
-
Quenching of 75S Aluminum Alloy
-
W.L. Fink and L.A. Willey, Quenching of 75S Aluminum Alloy, Trans. AIME, Vol 175, 1948, p 414-427
-
(1948)
Trans. AIME
, vol.175
, pp. 414-427
-
-
Fink, W.L.1
Willey, L.A.2
-
3
-
-
0041440678
-
A Quench Factor Analysis of the Influence of Water Spray Quenching on the Age-Hardenability of Aluminum Alloys
-
V.R. Voller, M.S. Stachowicz, and B.C. Thomas, Ed., Minerals, Metals, & Materials Society
-
J.S. Kim, R.C. Hoff, and D.R. Gaskell, A Quench Factor Analysis of the Influence of Water Spray Quenching on the Age-Hardenability of Aluminum Alloys, Materials Processing in the Computer Age, V.R. Voller, M.S. Stachowicz, and B.C. Thomas, Ed., Minerals, Metals, & Materials Society, 1991, p 203-221
-
(1991)
Materials Processing in the Computer Age
, pp. 203-221
-
-
Kim, J.S.1
Hoff, R.C.2
Gaskell, D.R.3
-
4
-
-
0015976590
-
Kinetics of Precipitation in Aluminum Alloys during Continuous Cooling
-
J.W. Evancho and J.T. Staley, Kinetics of Precipitation in Aluminum Alloys during Continuous Cooling, Metall. Trans., Vol 5, 1974, p 43-47
-
(1974)
Metall. Trans.
, vol.5
, pp. 43-47
-
-
Evancho, J.W.1
Staley, J.T.2
-
5
-
-
0023451909
-
Quench Factor Analysis of Aluminum Alloys
-
J.T. Staley, Quench Factor Analysis of Aluminum Alloys, Mater. Sci. Technol., Vol 3, 1987, p 923-935
-
(1987)
Mater. Sci. Technol.
, vol.3
, pp. 923-935
-
-
Staley, J.T.1
-
6
-
-
0001039566
-
Transformation Kinetics during Continuous Cooling
-
J.W. Cahn, Transformation Kinetics during Continuous Cooling, Acta Metall., Vol 4, 1956, p 572-575
-
(1956)
Acta Metall.
, vol.4
, pp. 572-575
-
-
Cahn, J.W.1
-
8
-
-
0000844586
-
Heat Treating of Aluminum Alloys
-
ASM International
-
Heat Treating of Aluminum Alloys, ASM Handbook, Vol 4, ASM International, 1991, p 841-879
-
(1991)
ASM Handbook
, vol.4
, pp. 841-879
-
-
-
9
-
-
0015602497
-
Interpretation of Quench-Sensitivity in Al-Zn-Mg-Cu Alloys
-
M. Conserva and P. Fiorini, Interpretation of Quench-Sensitivity in Al-Zn-Mg-Cu Alloys, Metall. Trans., Vol 4, 1973, p 857-862
-
(1973)
Metall. Trans.
, vol.4
, pp. 857-862
-
-
Conserva, M.1
Fiorini, P.2
-
10
-
-
0346786905
-
-
13-73-HQ40, Alcoa Laboratories, Alcoa Center, PA
-
J.W. Evancho, "Effects of Quenching on Strength and Toughness of 6351 Extrusions," 13-73-HQ40, Alcoa Laboratories, Alcoa Center, PA, 1973
-
(1973)
Effects of Quenching on Strength and Toughness of 6351 Extrusions
-
-
Evancho, J.W.1
-
11
-
-
0021401276
-
Effects of Quenching Path in Aluminum Alloy 7075
-
R.R. Sawtell, Effects of Quenching Path in Aluminum Alloy 7075, Aluminium, Vol 60, 1984, p 198-202
-
(1984)
Aluminium
, vol.60
, pp. 198-202
-
-
Sawtell, R.R.1
-
12
-
-
0023271667
-
Selecting Quenchants to Maximize Tensile Properties and Minimize Distortion in Aluminum Parts
-
C.E. Bates, Selecting Quenchants to Maximize Tensile Properties and Minimize Distortion in Aluminum Parts, J. Heat Treat., Vol 5, 1987, p 27-40
-
(1987)
J. Heat Treat.
, vol.5
, pp. 27-40
-
-
Bates, C.E.1
-
13
-
-
0024170993
-
Procedure for Quenching Media Selection to Maximize Tensile Properties and Minimize Distortion in Aluminum Alloy Parts
-
C.E. Bates and O.E. Totten, Procedure for Quenching Media Selection to Maximize Tensile Properties and Minimize Distortion in Aluminum Alloy Parts, Heat Treat. Met., Vol 15, 1988, p 89-97
-
(1988)
Heat Treat. Met.
, vol.15
, pp. 89-97
-
-
Bates, C.E.1
Totten, O.E.2
-
14
-
-
0023828353
-
Predicting Properties and Minimizing Residual Stress in Quenched Steel Parts
-
C.E. Bates, Predicting Properties and Minimizing Residual Stress in Quenched Steel Parts, J. Heat Treat., Vol 6, 1988, p 27-45
-
(1988)
J. Heat Treat.
, vol.6
, pp. 27-45
-
-
Bates, C.E.1
-
15
-
-
0004910690
-
Application of Quench Factor Analysis to Predict Hardness under Laboratory and Production Conditions
-
G.E. Totten, Ed., ASM International
-
C.E. Bates and G.E. Totten, Application of Quench Factor Analysis to Predict Hardness under Laboratory and Production Conditions, Quenching and Distortion Control, G.E. Totten, Ed., ASM International, 1992, p 33-39
-
(1992)
Quenching and Distortion Control
, pp. 33-39
-
-
Bates, C.E.1
Totten, G.E.2
-
16
-
-
0026707086
-
Film and Transition Boiling Correlations for Quenching of Hot Surfaces with Water Sprays
-
W.P. Klinzing, J.C. Rozzi, and I. Mudawar, Film and Transition Boiling Correlations for Quenching of Hot Surfaces with Water Sprays, J. Heat Treat., Vol 9, 1992, p 91-103
-
(1992)
J. Heat Treat.
, vol.9
, pp. 91-103
-
-
Klinzing, W.P.1
Rozzi, J.C.2
Mudawar, I.3
-
17
-
-
0000787148
-
Determination of the Local Quench Curve for Spray-Cooled Metallic Surfaces
-
I. Mudawar and W.S. Valentine, Determination of the Local Quench Curve for Spray-Cooled Metallic Surfaces, J. Heat Treat., Vol 7, 1989, p 107-121
-
(1989)
J. Heat Treat.
, vol.7
, pp. 107-121
-
-
Mudawar, I.1
Valentine, W.S.2
-
18
-
-
0029294256
-
Experimental and Numerical Study of Quenching Complex-Shaped Metallic Alloys with Multiple, Overlapping Sprays
-
D.D. Hall and I. Mudawar, Experimental and Numerical Study of Quenching Complex-Shaped Metallic Alloys with Multiple, Overlapping Sprays, Int. J. Heat Mass Transfer, Vol 38, 1995, p 1201-1216
-
(1995)
Int. J. Heat Mass Transfer
, vol.38
, pp. 1201-1216
-
-
Hall, D.D.1
Mudawar, I.2
-
19
-
-
51249170928
-
Prediction of the Temperature-Time Cooling Curves for Three-Dimensional Aluminum Products during Spray Quenching
-
T.A. Deiters and I. Mudawar, Prediction of the Temperature-Time Cooling Curves for Three-Dimensional Aluminum Products during Spray Quenching, J. Heat Treat., Vol 8, 1990, p 81-91
-
(1990)
J. Heat Treat.
, vol.8
, pp. 81-91
-
-
Deiters, T.A.1
Mudawar, I.2
-
20
-
-
0028378043
-
A Universal Approach to Predicting Temperature Response of Metallic Parts to Spray Quenching
-
I. Mudawar and T.A. Deiters, A Universal Approach to Predicting Temperature Response of Metallic Parts to Spray Quenching, Int. J. Heat Mass Transfer, Vol 37, 1994, p 347-362
-
(1994)
Int. J. Heat Mass Transfer
, vol.37
, pp. 347-362
-
-
Mudawar, I.1
Deiters, T.A.2
-
21
-
-
0027541668
-
An Efficient 2D Finite Element Procedure for the Quenching Analysis with Phase Change
-
K.F. Wang, S. Chandrasekar, and H.T.Y. Yang, An Efficient 2D Finite Element Procedure for the Quenching Analysis with Phase Change, ASME J. Eng. Ind., Vol 115, 1993, p 124-138
-
(1993)
ASME J. Eng. Ind.
, vol.115
, pp. 124-138
-
-
Wang, K.F.1
Chandrasekar, S.2
Yang, H.T.Y.3
-
22
-
-
0023210675
-
A Numerical and Experimental Study of Quenching of Circular Cylinders
-
N. Zabaras, S. Mukherjee, and W.R. Arthur, A Numerical and Experimental Study of Quenching of Circular Cylinders, J. Therm. Stresses, Vol 10, 1987, p 177-191
-
(1987)
J. Therm. Stresses
, vol.10
, pp. 177-191
-
-
Zabaras, N.1
Mukherjee, S.2
Arthur, W.R.3
-
23
-
-
0026810004
-
Effects of Spray Configuration on the Uniformity of Cooling Rate and Hardness in the Quenching of Aluminum Parts with Nonuniform Shapes
-
J.C. Rozzi, W.P. Klinzing, and I. Mudawar, Effects of Spray Configuration on the Uniformity of Cooling Rate and Hardness in the Quenching of Aluminum Parts with Nonuniform Shapes, J. Mater. Eng. Perform., Vol 1, 1992, p 49-60
-
(1992)
J. Mater. Eng. Perform.
, vol.1
, pp. 49-60
-
-
Rozzi, J.C.1
Klinzing, W.P.2
Mudawar, I.3
-
25
-
-
0004292911
-
-
Hibbitt, Karlsson and Sorensen, Inc., Providence, RI
-
ABAQUS User's Manual, Ver. 4.8, Hibbitt, Karlsson and Sorensen, Inc., Providence, RI, 1989
-
(1989)
ABAQUS User's Manual, Ver. 4.8
-
-
-
27
-
-
0003617943
-
-
Honeywell Research Center
-
G.G. Gubareff, J.E. Janssen, and R.H. Torborg, Thermal Radiation Properties Survey, 2nd ed., Honeywell Research Center, 1960
-
(1960)
Thermal Radiation Properties Survey, 2nd Ed.
-
-
Gubareff, G.G.1
Janssen, J.E.2
Torborg, R.H.3
-
29
-
-
5344248918
-
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
-
Vol 03.01, American Society for Testing and Materials
-
ASTM Designation E 18, "Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials," 1995 Annual Book of ASTM Standards, Vol 03.01, American Society for Testing and Materials, 1995, p 115-128
-
(1995)
1995 Annual Book of ASTM Standards
, pp. 115-128
-
-
-
30
-
-
0029304526
-
Predicting the Impact of Quenching on Mechanical Properties of Complex-Shaped Aluminum Alloy Parts
-
D.D. Hall and I. Mudawar, Predicting the Impact of Quenching on Mechanical Properties of Complex-Shaped Aluminum Alloy Parts, ASME J. Heat Transfer, Vol 117, 1995, p 479-488
-
(1995)
ASME J. Heat Transfer
, vol.117
, pp. 479-488
-
-
Hall, D.D.1
Mudawar, I.2
-
31
-
-
0029749110
-
Optimization of Quench History of Aluminum Parts for Superior Mechanical Properties
-
D.D. Hall and I. Mudawar, Optimization of Quench History of Aluminum Parts for Superior Mechanical Properties, Int. J. Heat Mass Transfer, Vol 39, 1996, p 81-95
-
(1996)
Int. J. Heat Mass Transfer
, vol.39
, pp. 81-95
-
-
Hall, D.D.1
Mudawar, I.2
-
33
-
-
85083933846
-
Preface
-
S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann
-
S. Suresh, A. Mortensen, and A. Needleman, Preface, Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann, 1993, p vii-viii
-
(1993)
Fundamentals of Metal Matrix Composites
-
-
Suresh, S.1
Mortensen, A.2
Needleman, A.3
-
34
-
-
84944042076
-
Metal Matrix Composites for Ground Vehicle, Aerospace, and Industrial Applications
-
S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann
-
M.J. Koczak, S.C. Khatri, J.E. Allison, and M.G. Bader, Metal Matrix Composites for Ground Vehicle, Aerospace, and Industrial Applications, Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann, 1993
-
(1993)
Fundamentals of Metal Matrix Composites
-
-
Koczak, M.J.1
Khatri, S.C.2
Allison, J.E.3
Bader, M.G.4
-
35
-
-
0028460242
-
Immersion-Cooled Standard Electronic Clamshell Module: A Building Block for Future High-Flux Avionic Systems
-
I. Mudawar, P.E. Jimenez, and R.E. Morgan, Immersion-Cooled Standard Electronic Clamshell Module: A Building Block for Future High-Flux Avionic Systems, ASME J. Electron. Packag., Vol 116, 1994, p 116-125
-
(1994)
ASME J. Electron. Packag.
, vol.116
, pp. 116-125
-
-
Mudawar, I.1
Jimenez, P.E.2
Morgan, R.E.3
-
36
-
-
84944048134
-
Aging Characteristics of Reinforced Metals
-
S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann
-
S. Suresh and K.K. Chawla, Aging Characteristics of Reinforced Metals, Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, Ed., Butterworth-Heinemann, 1993
-
(1993)
Fundamentals of Metal Matrix Composites
-
-
Suresh, S.1
Chawla, K.K.2
-
37
-
-
0024682580
-
A Theoretical and Experimental Study of Aluminum Alloy 6061-SiC Metal Matrix Composite to Identify the Operative Mechanism for Accelerated Aging
-
I. Dutta and D.L. Bourell, A Theoretical and Experimental Study of Aluminum Alloy 6061-SiC Metal Matrix Composite to Identify the Operative Mechanism for Accelerated Aging, Mater. Sci. Eng., Vol A112, 1989, p 67-77
-
(1989)
Mater. Sci. Eng.
, vol.A112
, pp. 67-77
-
-
Dutta, I.1
Bourell, D.L.2
-
38
-
-
0026119838
-
6061 Aluminum Alloy-SiC Particulate Composite: A Comparison between Aging Behaviour in T4 and T6 Treatments
-
P. Appendino, C. Badini, F. Marino, and A. Tomasi, 6061 Aluminum Alloy-SiC Particulate Composite: A Comparison between Aging Behaviour in T4 and T6 Treatments, Mater. Sci. Eng., Vol A135, 1991, p 275-279
-
(1991)
Mater. Sci. Eng.
, vol.A135
, pp. 275-279
-
-
Appendino, P.1
Badini, C.2
Marino, F.3
Tomasi, A.4
-
39
-
-
0024136866
-
Relationship between Strengthening Mechanisms and Fracture Toughness of Discontinuous SiC/Al Composites
-
R.J. Arsenault, Relationship between Strengthening Mechanisms and Fracture Toughness of Discontinuous SiC/Al Composites, J. Compos. Technol. Res., Vol 10, 1988, p 140-145
-
(1988)
J. Compos. Technol. Res.
, vol.10
, pp. 140-145
-
-
Arsenault, R.J.1
-
40
-
-
0026124158
-
Comparative Evaluation of Extrusion and Hot Isostatic Pressing as Fabrication Techniques for Al-SiC Composites
-
A. Niklas, L. Froyen, L. Delaey, and L. Buekenhout, Comparative Evaluation of Extrusion and Hot Isostatic Pressing as Fabrication Techniques for Al-SiC Composites, Mater. Sci. Eng., Vol A135, 1991, p 225-229
-
(1991)
Mater. Sci. Eng.
, vol.A135
, pp. 225-229
-
-
Niklas, A.1
Froyen, L.2
Delaey, L.3
Buekenhout, L.4
-
41
-
-
5344220538
-
Investigation of Heat Transfer Mechanisms and Metallurgical Transformations in Metal Matrix Composites to Predict Quench Factors
-
Naval Air Warfare Center, Aircraft Division, Indianapolis, IN, Sept
-
R.E. Morgan, S.L. Ehlers, and C.C. Myers, "Investigation of Heat Transfer Mechanisms and Metallurgical Transformations in Metal Matrix Composites to Predict Quench Factors," ILIR FY 95 Annual Report, Naval Air Warfare Center, Aircraft Division, Indianapolis, IN, Sept 1995
-
(1995)
ILIR FY 95 Annual Report
-
-
Morgan, R.E.1
Ehlers, S.L.2
Myers, C.C.3
|