Remanent life assessment of creep-resistant modified 12% chromium steels: Microstructural analysis and microstructural development models

Scandinavian Journal of Metallurgy

Volumn 26, Issue 1, 1997, Pages 27-40

  Lundin, L ^a   Norell, M ^a   Andren H O ^a   Nyborg, L ^a  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Chromium steels; Microanalysis; Microstructure; Nucleation kinetics; Powder metallurgy; Precipitates; Thermodynamic modelling

Indexed keywords

AUGER ELECTRON SPECTROSCOPY; CHROMIUM; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; MICROANALYSIS; NUCLEATION; PRECIPITATION (CHEMICAL); TEMPERING; THERMODYNAMICS; TRANSMISSION ELECTRON MICROSCOPY;

CHROMIUM STEEL; LAVES PHASE; NUCLEATION KINETICS; REMANENT LIFE;

STEEL METALLOGRAPHY;

EID: 0031074608     PISSN: 03710459     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (58)

1. Lundin L. In: High resolution microanalysis of creep resistant 9-12% chromium steels, Thesis (Chalmers University of Technology, 1995).
2. Norell M. In: Influence of segregants on creep fracture of PM martensitic stainless steel, Thesis (Chalmers University of Technology, 1996).
3. Bertilsson JE, Scarlin B. In: Bachelet E et al. (eds). High temperature materials for power engineering, Kluwer Academic Publisher, Dordrect 1990: 281-312.
4. Sundman B, Jansson B, Andersson J-O. Calphad 9, Dept. of Physical Metallurgy, The Royal Institute of Technology, Stockholm, Sweden (1985) 153-190.
5. Ernst P. In: Effect of boron on the mechanical properties of modified 12% chromium steels, Thesis (ETH, Zürich. Diss no. 8596, 1988).
6. Naylor DJ. Materials World (1993, February) 109-110.
7. Greenfield P. In: A review of the properties of 9-12% Cr steels for use as HP/IP rotors in advanced steam turbines. Marriot JB, Pithan K (eds). Office for official publications of the European communities, Luxembourg, 1989.
8. Fujita T. Adv Mat Proc (1992, Issue 4) 42-47.
9. Berger C, Vanstone RW. In: Materials for combined cycle power plant (The Institute of Metals, London, 1992) 119-136.
10. Berger C, Mayer KH, Scarlin RB. VGB Kraftwerkstechnik 71 (1991) 686-699.
11. Blum VR, Hald J, Bendick W, Rosselet A, Vaillant JC. VGB Kraftwerkstechnik 74 (1994) 641-652.
12. Fujita T. Metal Progress (1986, August) 33-40.
13. Fujita T. ISIJ Int. 32 (1992) 175-181.
14. Thornton DV, Vanstone RW. In: Materials engineering in turbines and compressors. Conroy RD, Goulette MJ, Strang A (eds). (The Institute of Materials, London, 1995) 125-153.
15. Fujita T. In: Materials engineering in turbines and compressors. Conroy RD, Goulette NJ, Strang A (eds). (The Institute of Materials, London, 1995) 493-516.
16. Hidaka K et al. In: Materials for advanced power engineering. Coutsouradias D et al. (eds). (Kluwer Academic Publishers, Dordrecht, 1994) vol. Part I, 281-290.
17. Orr J, Burton D. In: Materials for advanced power engineering. Coutsouradias D et al. (eds). Kluwer Academic Publishers, Dordrecht, 1994, vol. Part I, 263-280.
18. Naoi H, Araki S, Yasuda H, Fujita T, Ohgami M, Ogava T, Masumoto H. In: Development of high-strength ferritic steel NF616 for bolier tubes, Report (Nippon Steel technical report No. 50, 1991).
19. Berger C, Scarlin RB, Mayer KH, Thornton DV, Beech SM. In: Materials for advanced power engineering. Coutsouradias D et al. (eds). Kluwer Academic Publishers, Dordrecht, 1994, vol. Part I, 47-72.
20. Kawanishi H, Sekimura N, Shibata M, Ishino S. J Nucl Mat 133&134 (1985) 623-627.
21. Hosoi Y, Wade N, Kunimitsu S, Urita T. J Nucl Mat 141-143 (1986) 461-467.
22. Tamura M, Hayakawa H, Yoshitake A, Hishinuma A, Kondo T. J Nucl Mat 155-157 (1988) 620-625.
23. Abe F, Nakazava S. Mat Sci Tech 8 (1992) 1063-1069.
24. Abe F, Nakazawa S, Araki H, Noda T. Metall Trans A 23 (1992) 469-477.
25. Abe F, Araki H, Noda T. Metall Trans A 22 (1991) 2225-2235.
26. Irvine KJ, Crowe MA, Pickering F. J Iron Steel Inst 195 (1960) 386-405.
27. Irvine KJ, Pickering FB. In: Metallurgical developments in high-alloy steels (The Iron and Steel Institute, London, 1964) 34-48.
28. Hald J. In: TEM investigations in new 9-12% Cr steels for high temperature applications. Report (Dept. of Metallurgy, The Technical University of Denmark, 1988).
29. Berns H, Krafft F. In: Advances in material technology for fossil power plants, Viswanathan R, Jaffee RI (eds). (ASM Int, Cleveland, Ohio, 1987) 173-180.
30. Cai G-J. In: Microstructure and mechanical properties of high chromium steel weld metals. Thesis (Chalmers University of Technology, 1994).
31. Eggeler G, Nilsvang N, Ilschner B. Steel Research 58 (1987) 97-103.
32. Hede A, Aronsson B. J Iron Steel Inst (September 1969) 1241-1251.
33. Jones WB, Hills CR, Polonis DH. Metall Trans A 22 (1991) 1049-1058.
34. Mackenbrock M, Grabke HJ. Steel Research 62 (1991) 371-378.
35. Thomson RC, Bhadeshia HKDH. Metall Trans A 23 (1992) 1171-1179.
36. Mclean D. In: Mechanical properties of metals. John Wiley & Sons, Inc., New York, 1962.
37. Fujiwara M, Nishida T. KOBE steel engineering reports 40 (1990) 58-61.
38. Greenwell BS, Beech SM. In: Rupture ductility of creep resistant steels. Strang A (ed). The Institute of Metals, London, 1991, 103-115.
39. Berns H, Krafft F. In: Rupture ductility of creep resistant steels. Strang A (ed). The Institute of Metals, London, 1991 116-124.
40. Stein G, Menzel J. In: High temperature materials for power engineering. Bachelet E et al. (eds). Kluwer Academic Publisher, Dordrect, 1990 525-533.
41. Asakura K, Fujita T, Otoguro Y. Iron and Steel Institute, Japan 73 (1987) 1762.
42. Liu XY, Fujita T. Iron and Steel Institute, Japan 74 (1988) 513-520.
43. Fujita T, Takahashi N. Trans ISIJ 18 (1978) 269-278.
44. Lagneborg R, Bergman B. Metal Science (January 1976) 20-28.
45. Dyson BF, McLean M. ISIJ Int. 30 (1990) 802-811.
46. Ilshner B. Jernkontorets Annaler 155 (1971) 301-310.
47. Evans RW, Willis MR, Wilshire B, Holdsworth S, Senior B, Fleming A, Spindler M, Williams JA. In: 5th Int Conf on Creep and fracture of engineering materials and structures. Wilshire B, Evans RW (eds). Institute of Materials, London, 1993, 633-640.
48. Larson FR, Miller. Transactions ASME 74 (1952) 765-775.
49. Uehara T, Ohno T, Watanabe R, Fujita T. In: Materials engineering in turbines and compressors. Conroy RD, Goulette MJ, Strang A (eds). The Institute of Materials, London, 1995, 391-400.
50. Anthamatten B. In: Stichstofflegierte 9-12% Chromstähle für Hochtemperaturanwendungen, Thesis (ETH, Zürich. Diss. no 9047, 1990).
51. Lundin L, Fällman S, Andrén H-O. Materials Science and Technology (1997, in press).
52. Bjärbo A. Scand J Metallurgy 23 (1994) 103-112.
53. Senior BA, Noble FW, Eyre BL. Acta Metall 36 (1988) 1855-1862.
54. Lundin L, Richarz B. Appl Surf Sci 87/88 (1995) 194-199.
55. Gustafson Å, Ågren J. In: Modelling of carbo-nitride nucleation in multicomponent steel, Report D128 (Dept. of Materials Science and Engineering, Royal Institute of Technology, Sweden, 1995).
56. Bjärbo A. In: Varmhållfastheten hos pulvertekniskt framställda 10% kromstål, Final Report 566 008-3 (The National Swedish Board for Industrial and Technical Development, Stockholm, Sweden, 1996).
57. Murray JD. In: Precipitation processes in steels. The Iron and Steel Institute, London, 1959: 285-322.
58. Honeyman GA. In: Materials for combined cycle power plant. The Institute of Metals, London, 1992: 137-144.