Quantitative fit testing techniques and regulations for tight-fitting respirators: Current methods measuring aerosol or air leakage, and new developments

American Industrial Hygiene Association Journal

Volumn 58, Issue 3, 1997, Pages 219-228

  Han, Don Hee ^a,b   Willeke, Klaus ^a   Colton, Craig E ^c  

^a UNIVERSITY OF CINCINNATI COLLEGE OF MEDICINE   (United States)

^b Inje University   (South Korea)

^c 3M COMPANY   (United States)

Author keywords

aerosol leakage; air leakage; fit testing; respirator; respiratory protection

Indexed keywords

AEROSOL; AIR QUALITY CONTROL; ARTICLE; GAS MASK; INDUSTRIAL HYGIENE; OCCUPATIONAL SAFETY; WORKROOM AIR;

EID: 0030906141     PISSN: 00028894     EISSN: None     Source Type: Journal    
DOI: 10.1080/15428119791012874     Document Type: Article

References (85)

1. National Institute for Occupational Safety and Health (NIOSH): Guide to Industrial Respiratory Protection (DHHS/NIOSH pub. no. 87-116). Washington, DC: Government Printing Office, 1987. pp. 3-123.
2. Colton, C.E., L.R. Birkner, and L.M. Brosseau (eds): Respiratory Protection: A Manual and Guideline, 2nd ed. Fairfax, VA: American Industrial Hygiene Association, 1991.
3. National Institute for Occupational Safety and Health (NIOSH): Respirator Decision Logic (DHHS/NIOSH pub. no. 87-108). Washington, DC: Government Printing Office, 1987. pp. 50-51.
4. Crutchfield, C.D. and M.D. Van Ert: An examination of issues affecting the current state of quantitative respirator fit testing. J. Int. Soc. Respir. Prot. 11(2):5-18 (1993).
5. da Roza, R.A., A.H. Biermann, K.L. Foote, C. McCormack, et al: Evaluation of Portacount for determining respirator fit factors. Part III: Human subject tests and comparison with an aerosol photometer. J. Int. Soc. Respir. Prot. 9(3):22-37 (1991).
6. Oestenstad, R.K. and J.B. Graffeo: Determination of respirator fit by an aerosol method and a negative pressure method. J. Int. Soc. Respir. Prot.. 11(3):6-14 (1993-1994).
7. Biermann, A.H. and W. Bergman: Filter penetration measurements using a condensation nuclei counter and an aerosol photometer. J. Aerosol Sci. 19(4):471-483 (1988).
8. Biermann, A.H., R.A. da Roza, S.R. Sawyer, K.L. Foote, et al.: Evaluation of Portacount for determining respirator fit factors, Part II: Laboratory breathing machine tests of stability and comparison with an aerosol photometer. J. Int. Soc. Respir. Prot. 9(2):26-41 (1991).
9. Crutchfield, C.D., D.L. Park., J.L. Hensel, M.K. Kvesic, et al.: Determination of known respirator leakage using controlled negative pressure and ambient aerosol QNFT systems. Am. Ind. Hyg. Assoc. J: 56:16-23 (1995).
10. "Asbestos," Code of Federal Regulations Title 29, Part 1910.1001. 1994. pp. 34-42.
11. Myers, W.R., S.W. Lenhart, D. Campbell, and G. Provost: Letter to the editor. Am. Ind. Hyg Assoc. J. 44:B25-B26 (1983).
12. AIHA's Respiratory Protection Committee: Respirator performance terminology: Letter to the editor. Am. Ind. Hyg. Assoc. J. 46:B22-B24 (1985).
13. Brown, R.C.: Protection factors of respirators with special reference to dust respirators. J. Int. Soc. Respir. Prot. 10(1):5-33 (1992).
14. da Roza, R.A., C.A. Cadena-Fix, G.J. Carlson, K.E. Hardis, et al.: Reproducibility of respirator fit as measured by quantitative fitting tests. Am. Ind. Hyg. Assoc. J. 44:788-794 (1983).
15. Carpenter, D. and K. Willeke: Quantitative respirator fit testing: dynamic pressure versus aerosol measurement. Am. Ind. Hyg. Assoc. J. 49:492-496 (1988).
16. Rose, J.C., R.K. Oestenstad, and V.E. Rose: A comparison of respirator fit factors determined by portable condensation nuclei counting and forward light-scattering photometric methods. Appl. Occup. Environ. Hyg. 5(11): 792-797 (1990).
17. Krishnan, U., K. Willeke, A. Juozaitis, T. Myojo, et al.: Variation in quantitative respirator fit factors due to fluctuations in leak size during fit testing. Am. Ind. Hyg. Assoc. J. 55:309-314 (1994).
18. Krishnan, U., K. Willeke, A. Juozaitis, M. Lehtimaki, et al.: Development of a dichotomous-flow quantitative fit test for half-mask and full-facepiece respirators. Am. Ind. Hyg. Assoc. J. 55:223-229 (1994).
19. Myers, W.R., J. Allender, R. Plummer, and T. Stobbe: Parameters that bias the measurement of airborne concentration within a respirator. Am. Ind. Hyg Assoc. J. 47:106-114 (1986).
20. Myers, W.R., J.R. Allender, W. Iskander, and C. Stanley: Causes of in-facepicce sampling bias - I. Half-facepiece respirators. Ann. Occup. Hyg. 12(3):345-359 (1988).
21. Myers, W.R. and J.R. Allender: Causes of in-facepiece sampling bias - II. Full-facepicce respirators. Ann. Occup. Hyg. 32(3):361-372 (1988).
22. Holton, P.M., D.L. Tackett, and K. Willeke: Particle size-dependent leakage and losses of aerosol in respirators. Am. Ind. Hyp. Assoc. J. 48:848-854 (1987).
23. Holton, P.M. and K. Willeke: The effect of aerosol size distribution and measurement method on respirator fit. Am. Ind. Hyg. Assoc. J. 48:855-860 (1987).
24. Willeke, K. and U. Krishnan: Present procedures in quantitative respirator fit testing: problems and potential solutions. Appl. Occup. Environ. Hyg. 5(11):762-765 (1990).
25. Oestenstad, R.K., J.L. Perkins, and V.E. Rose: Identification of faceseal leak sites on a half-mask respirator. Am. Ind. Hyg. Assoc. J. 51:280-284 (1990).
26. Burgess, W.A., L. Silverman, and F. Stein: A new technique for evaluating respirator performance. Am. Ind. Hyg. Assoc. J. 22:422-429 (1961).
27. Hyatt, E.C., J.A. Pritchard, and C.P. Richards: Respirator efficiency measurement using quantitative DOP man tests. Am. Ind. Hyg. Assoc. J. 33: 635-643 (1972).
28. International Commission on Radiological Protection: Deposition and retention models for internal dosimetry of the human respiratory tract. Health Phys. 72:173-207(1966).
29. Chan, T.L. and M. Lippmann: Experimental measurements and empirical modeling of the regional deposition of inhaled particles in humans. Am. Ind. Hyg. Assoc. J. 47:399-409 (1980).
30. Blanchard, J.D. and K. Willeke: Total deposition of ultratine sodium chloride particles in human lungs. J. Applied. Physiol.: Resp. Environ. Exer. Physiol. 57:1850-1856 (1984).
31. Johnson, B.R., K.A. Bjork, and J.B. Weed: A new sampling technique that allows quantitative fit testing by using the employee's own respirator. Am. Ind. Hyg. Assoc. J. 53:776-79 (1992).
32. Japuntich, D.A. and A.R. Johnston: "Respirator Leak Tracking Using a Fluorescent Aerosol." Paper presented at the International Society for Respiratory Protection Conference, Toronto, Canada, October 1987.
33. Hinds, W. and G. Kraske: Performance of dust respirators with facial seal leaks: I. Experimental. Am. Ind. Hyg. Assoc. J. 48:836-841 (1987).
34. Myers, W.R., H. Kim, and N. Kadrichu: Effect of particle size on assessment of faceseal leakage. J. Int. Soc Respir. Prot. 9(3):6-20 (1991).
35. Oestenstad, R.K., S.M. Hollenbeck, and J.L. Sherill: "Variation of Respirator Fit Among the Exercises of a Quantitative Fit Test as Measured in a Respiratory Protection Program." Paper presented at the American Industrial Hygiene Conference & Exposition, Kansas City, Mo., May 1995.
36. Lehtimaki, M. and K. Willeke: Measurement methods. In Aerosol Measurement, K. Willeke and P.A. Baron, eds. New York: Van Nostrand Reinhold, 1993.
37. National Institute for Occupational Safety and Health (NIOSH): A Guide to Industrial Respiratory Protection, by J.A. Pritchard (NIOSH 76-189). Cincinnati, OH: NIOSH, 1976. pp. 133-135.
38. Willeke, K., H.E. Aver, and J.D. Blanchard: New methods for quantitative respirator fit testing with aerosols. Am. Ind. Hyg. Assoc. J. 42:121-125 (1981).
39. Sinclair, D. and G.S. Hoopes: A continuous condensation nucleus counter. J. Aerosol Sci. 6(1):1-7 (1975).
40. Ernstberger, H.G., R.B. Gall, and C.W. Turok: Experiments supporting the use of ambient aerosols for quantitative respirator fit testing. Am. Ind. Hyg. Assoc. J. 49:613-619 (1988).
41. Crosby, D.W.: Quantitative respirator fit testing - Which technology to use? [Newsletter Article] Respir. Prot. Update 6(1):(1995). Jefferson, MD: Respirator Support Services, 1995.
42. Carpenter, D. and K. Willeke: Noninvasive, quantitative respirator fit testing through dynamic pressure measurement. Am. Ind. Hyg. Assoc. J. 49: 485-491 (1988).
43. Crutchfield, C.D., M.P. Eroh, and M.D. Van Ert: A feasibility study of quantitative respirator fit testing by controlled negative pressure. Am. Ind. Hyg. Assoc. J. 52:172-176 (1991).
44. Crutchfield, C.D., R.W. Murphy, and M.D. Van Ert: A comparison of controlled negative pressure and aerosol quantitative respirator fit test systems by using fixed leaks. Am. Ind. Hyg. Assoc. J. 52:249-251 (1991).
45. Crutchfield, C.D., R.W. Murphy, and M.D. Van Ert: A comparison of controlled negative pressure and aerosol quantitative respirator fit test systems by using human subjects. Am. Ind. Hyg. Assoc. J: 54:10-14 (1993).
46. Crutchfield, C.D., T.K. Pham, and M.D. Van Ert: Determination of inspiratory pressure and flow rates for work rate-dependent quantitative respirator fit testing. Appl. Occup. Environ. Hyg. 8:103-107 (1993).
47. McGlone, J.T.: Quantitative respirator fit testing through dynamic pressure decay measurement. Appl. Ind. Hyg. 3(11):F27-F29 (1988).
48. Xu, M., D. Han, S. Hangal, and K. Willeke: Respirator fit and protection through determination of air and particle leakage. Ann. Occup. Hyg 35(1):13-24 (1991).
49. Chen, C.C. and K. Willeke: Characteristics of faceseal leakage in filtering facepieces. Am. Ind. Hyg. Assoc. J. 53:533-539 (1992).
50. Han, D., M. Xu, S. Foo, W. Pilacinski, et al.: Simplified pressure method for respirator fit testing. Am. Ind. Hyg. Assoc. J. 52:305-308 (1991).
51. "Respiratory Protective Devices; Final Rules and Notice," Federal Register 60:110 (8 June 1995), pp. 30336-30398.
52. Chen, C.C., M. Lehtimaki, and K. Willeke: Aerosol penetration through filtering facepieces and respirator cartridges. Am. Ind. Hyg. Assoc. J. 53: 566-574 (1992).
53. Iverson, S.G., S.G. Danisch, H.E. Mullins, and S.K. Rudolph: Validation of a quantitative fit test for dust/fume/mist respirators: Part I. Appl. Occup. Environ. Hyg. 7(3):161-167 (1992).
54. Danisch, S.G., H.E. Mullins, and C.R. Rhoe: A quantitative fit test for dust/mist respirator: Part II. Appl. Occup. Environ. Hyg. 7(4):241-245 (1992).
55. Myojo, T., K. Willeke, and C.C. Chen: Fit test for filtering facepieces: search for a low-cost, quantitative method. Am. Ind. Hyg. Assoc. J. 55:797-805 (1994).
56. Brown, R. C. and N.P. Vaughan: Measurement of the leakage and fit factor of a filtering facepiece by continous monitoring of pressure pulsations. Am. Ind. Hyg. Assoc. J. 54:409-416 (1993).
57. Centers for Disease Control and Prevention: NIOSH Recommended Guidelines for Personal Respiratory Protection of Workers in Health-Care Facilities Potentially Exposed to Tuberculosis. Washington, DC: Government Printing Office, 1992. pp. 32-55.
58. Chen, C.C. and K. Willeke: Aerosol penetration through surgical masks. Am. J. Infect. Control 20(4):177-184 (1992).
59. Chen, S.K., D. Vesley, L.M. Brosseau, and J.H. Vincent: Evaluation of single-use masks and respirators for protection of health care workers against mycobacterial aerosols. Am. J. Infect. Control 22(2):65-74 (1994).
60. Weber, A., K. Willeke, R. Marchioni, T. Myojo, et al.: Aerosol penetration and leakage characteristics of masks used in the health care industry. Am. J. Infect. Control 21(4):167-173 (1993).
61. Laye, R.: Evaluation of a miniaturized condensation nucleus counter for measurement of respirator fit factor. J. Int. Soc. Respir. Prot. 5(3):1-7 (1987).
62. Burnis, R.P.: A comparison of fit factors determined by an aerosol method and a dynamic negative pressure method. Master's research project report, Department of Environmental Health Sciences, University of Alabama at Birmingham, 1991.
63. "Cadmium," Code of Federal Regulations Title 29, Part 1910.1027. 1994. pp. 204-208.
64. American National Standards Institute (ANSI): American National Standard for Respiratory Protection (ANSI Z88.2-1992). New York: ANSI, 1992.
65. European Committee for Standardization: "EN 136 Respiratory Protective Devices: Fullface Masks; Requirements, Testing, Marking." Brussels, Belgium: European Committee for Standardization, 1989.
66. European Committee for Standardization: "EN 140 Half-masks and Quarter-masks; Requirements, Testing, Marking." Brussels, Belgium: European Committee for Standardization, 1989.
67. Standards Australia and Standards New Zealand: AS/NZS 1716:1994, Respiratory Protective Devices. Homebush, NSW 2140 Australia: Standards Australia, 1994.
68. "Occupational Safety and Health Standards," Code of Federal Regulations Title 29, Part 1910. 1994. pp. 66-584.
69. "Safety and Health Regulations for Construction," Code of Federal Regulations Title 29, Part 1926. 1994. pp. 1-951.
70. "Respiratory Protection," Code of Federal Regulations Title 29, Part 1910.134. 1994. pp. 413-417.
71. "Respiratory Protection; Proposed Rule," Federal Register 59:219 (15 November 1994) pp. 58884-58956.
72. T.J. Shepich to R.F. Boggs, 8 February 1988, Occupational Health and Safety Administration CD-ROM (OSHA A95-3) through June 1995, Washington, DC (1995).
73. J.B. Miles to T. Sekulic, 25 September 1986, Occupational Health and Safety Administration CD-ROM (OSHA A95-3) through June 1995, Washington, DC (1995).
74. "Quantitative Respirator Fit Testing Requirements and Compliance." Memorandum from U.S. Department of Labor, Washington, DC 20210, dated June 24, 1994.
75. Colton, C.E.: Qualitative fit testing or quantitative fit testing: Which one should you use? 3M JobHealth Highlights, vol. 12, no. 2. St. Paul, MN: 3M, 1994. pp. 3-4.
76. Standards Australia and Standards New Zealand: AS/NZS 1715.1994, Selection, Use and Maintenance of Respiratory Protective Devices. Homebush, NSW 2140 Australia: Standards Australia, 1994.
77. Canadian Standards Association: Z94.4-93, Selection, Use, and Care of Respirators. Rexdale, Ontario, Canada: Canadian Standards Association, 1993.
78. Occupational Safety and Health Administration: "29 CFR 1910.134(e)(5)-Respirator Fit Testing." [Compliance Directive CPL 2-2.29] Washington, DC, October 27, 1980.
79. Johanson, R.E. and M.S. Morgan: Some observations on frequency of respirator fit tests. Am. Ind. Hyg. Assoc. J. 45:134-135 (1984).
80. Hyatt, E.C.: Respiratory Studies for the National Institute for Occupational Safety and Health July 1, 1972 through June 3, 1975. Los Alamos, NM: Los Alamos Scientific Laboratory (LA-5620 PR), 1974.
81. Nelson, T.J., D.P. Wilmes and R.A. da Roza: ANSI Z88.2 (1992): Practices for Respiratory Protection. Am. Ind. Hyg. Assoc. J. 55:660-662 (1994).
82. Nelson, T.J.: "The ANSI Requirement for a Fit Factor of 10 Times APF." March 29, 1996. [Private Communication]. NIHS, Inc., 2401 East Mall, Ardentown, DE 19810.
83. Dixon, S.W. and T.J. Nelson: Workplace protection factors for negative pressure half-mask facepiece respirator. J. Int. Soc. Respir. Prot. 2:347-361 (1984).
84. Colton, C.E., A.R. Johnson, H.E. Mullins, and C.R. Rhoe: "Workplace Protection Factor Study on a Full Facepiece Respirator." Paper presented at the American Industrial Hygiene Conference, St. Louis, Mo., May 1989.
85. "Methylenedianiline," Code of Federal Regulations Title 29, Part 1910.1050. 1994. pp. 461-468.