Longitudinal curvature effects in turbulent boundary layers

Progress in Aerospace Sciences

Volumn 33, Issue 1-2, 1997, Pages 1-70

  Patel, V C ^a   Sotiropoulos, F ^b  

^a IA United States   (United States)

^b Georgia Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY CONDITIONS; MATHEMATICAL MODELS; TURBULENT FLOW; VORTEX FLOW; WALL FLOW;

CONCAVE CURVATURE; CONVEX CURVATURE; MOMENTUM TRANSFER; STREAMLINE CURVATURE; THREE DIMENSIONAL FLOW; TWO DIMENSIONAL FLOW;

BOUNDARY LAYER FLOW;

EID: 0030865472     PISSN: 03760421     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0376-0421(96)00001-2     Document Type: Review

References (154)

1. Alving, A. E., Smits, A. J. and Watmuff, J. H. (1990) Turbulent boundary layer relaxation from convex curvature, J. Fluid Mech. 211, 529-556.
2. Amano, R. S. and Goel, P. (1987) Investigation of third-order closure model of turbulence for computation of incompressible flows in a channel with a backward-facing step, J. Fluids Engng 109, 424-428.
3. Baldwin, B. S. and Barth, T. J. (1991) A one-equation turbulence transport model for high Reynolds number wall-bounded flows. AIAA paper 91-0610.
4. Bandyopadhyay, P. R. (1986) Review - mean flow in turbulent boundary layers disturbed to alter skin friction, J. Fluids Engng 108, 127-140.
5. Bandyopadhyay, P. R. (1990) Convex curvature concept of viscous drag reduction, In Viscous Drag Reduction in Bounday Layers, Vol. 123, pp. 285-324 (eds D.M. Bushnell and J.N. Hefner), AIAA, Washington, D.C.
6. Barlow, R. S. and Johnston, J. P. (1985) Structure of turbulent boundary layers on a concave surface, Report MD-47, Thermosciences Division, Department of Mechanical Engineering, Stanford University, Stanford, CA.
7. Barlow, R. S. and Johnston, J. P. (1988) Structure of turbulent boundary layers on a concave surface, J. Fluid Mech. 191, 137-176.
8. Baskaran, V., Smits, A. J. and Joubert, P. N. (1987) A turbulent flow over a curved hill. Part 1. Growth of an internal boundary layer, J. Fluid Mech. 182, 47-83.
9. Bergstrom, D. J., Adamopoulos, G. and Postlethwaite, J. (1993) Numerical prediction of two-dimensional flow in a curved channel with separation, In Separated Flows, FED-Vol. 149, ASME, New York.
10. Bippes, H. and Görtler, H. (1972) Dreidimensionale störungen in der grenzschicht an einer konkaven wand, Acta Mech. 14, 251.
11. Bradshaw, P. (1969) The analogy between streamline curvature and buoyancy in turbulent flow, J. Fluid Mech. 36, 177-191.
12. Bradshaw P. (1973) Effects of streamline curvature on turbulent flow, AGARDograph No. 169, AGARD, 7 Rue Ancelle, 92200 Neuilly Sur Seine, France.
13. Brankovic, A. and Syed, S. (1991) Validation of Reynolds-stress turbulence model in generalized coordinates, AIAA paper 91-1782.
14. Butz, L. A. (1979) Turbulent flow in S-shaped ducts, M. S. thesis, Aeronautical and Astronautical Department, Purdue University, West Lafayette, Indiana.
15. Castro, I. P. and Bradshaw, P. (1976) The turbulence structure of a highly curved mixing layer, J. Fluid Mech. 73, 265-304.
16. Chandrsuda, C. and Bradshaw, P. (1981) Turbulence structure of a reattaching mixing layer, J. Fluid Mech. 110, 171-194.
17. Chen, H. C. and Patel, V. C. (1984) Near-wall turbulence models for complex flows including separation, AIAA J. 26, 641-648.
18. Cheng, G. C. and Farokhi, S. (1992) On turbulent flows dominated by curvature effects, J. Fluids Engng 114, 52-57.
19. Chevray, R. (1968) The turbulent wake of a body of revolution, J. Basic Engng 9, 275-284.
20. Chung, M. K., Park, S. W. and Kim, K. C. (1987) Curvature effect on third-order velocity correlations and its model representation, Phys. Fluids 30, 626-631.
21. Coles, D. E. (1956) The law of the wake in the turbulent boundary layer, J. Fluid Mech. 1, 191-226.
22. Colombini, M. (1993) Turbulence-driven secondary flows and formation of sand ridges, J. Fluid Mech. 254, 701-719.
23. Daly, B. J. and Harlow, F. H. (1970) Transport equations in turbulence, Phys. Fluids 13, 2634-2649.
24. Driver, D. M. and Seegmiller, H. (1985) Features of a reattaching turbulent shear layer in divergent channel flow. AIAA J. 23, 163-171.
25. Durao, D. F. G. (1976) The application of laser anemometry to free jets and flames with and without recirculation, Ph.D. thesis, University of London.
26. Durbin, P. A. (1993) A Reynolds-stress model for near-wall turbulence, J. Fluid Mech. 249, 465-498.
27. Eaton, J. K. (1980) Turbulent flow reattachment: an experimental study on the flow and structure behind a backward-facing step, Ph.D. thesis, Mechanical Engineering, Stanford University, Stanford, CA.
28. Eibeck, P. A. and Eaton, J. K. (1987) Heat transfer effects of a longitudinal vortex embedded in a turbulent boundary layer, J. Heat Transfer 109, 16-24.
29. Ellis, L. B. and Joubert, P. N. (1974) Turbulent shear flow in a curved duct, J. Fluid Mech. 62, 65-84.
30. Eskinazi, S. and Yeh, H. (1956) An investigation on fully developed turbulent flows in a curved channel, J. Aeronaut. Sci. 23, 23-34.
31. Fraser, M. and Siddig, M. H. (1980) Turbulent flow over a plane normal wall, J. Mech. Engng Sci. 22, 207-211.
32. Gibson, M. M. (1978) An algebraic stress and heat-flux model for turbulent shear flow with streamline curvature, Int. J. Heat Mass Transfer 21, 1609.
33. Gibson, M. M. (1984) Effects of streamline curvature on turbulence. In: Frontiers in Fluid Mechanics, p. 184 (eds Sh. Davis and J. L. Lumley), Springer, New York.
34. Gibson, M. M. and Launder, B. E. (1978) Ground effects on pressure fluctuations in the atmospheric boundary layers, J. Fluid Mech. 86, 491-511.
35. Gibson, M. M. and Rodi, W. (1981) A Reynolds-stress closure model of turbulence applied to the calculation of a highly curved mixing layer, J. Fluid. Mech. 103, 161-182.
36. Gibson, M. M. and Servat-Djoo, K. (1985) Measurements in the heated turbulent boundary layer on a mildly curved concave surface. In: Proc. 5th Sym. Turb. Shear Flows, Ithaca, NY.
37. Gibson, M. M., Jones, W. P. and Younis, B. A. (1981) Calculation of turbulent boundary layers on curved surfaces, Phys. Fluids 24, 386-395.
38. Gibson, M. M., Verriopoulos, C. A. and Nagano, Y. (1981) Measurements in the heated turbulent boundary layer on a mildly curved convex surface. In: Proc. 3rd Sym. Turb. Shear flow, Davis, CA.
39. Giles, J. A., Hays, A. P. and Sawyer, R. A. (1966) Turbulent wall jets on logarithmic spiral surfaces, Aeronaut. Q. 17, 201-215.
40. Gillis, J. C. and Johnston, J. P. (1983) Turbulent boundary layer flow and structure on a convex wall and its redevelopment on a flat wall, J. Fluid Mech. 135, 123-153.
41. Gillis, J. C., Johnston, J. P., Moffat, R. J. and Kays, W. M. (1981) Experimental data and model for the turbulent boundary layer on a convex, curved surface, NASA CR 3391.
42. Görtler, H. (1940) On the three-dimensional instability of laminar boundary layers on concave walls, NACA TM 1375.
43. Guitton, D. E. (1970) Some contributions to the study of equilibrium and non-equilibrium turbulent wall jets over curved surfaces, Ph.D. thesis, Mechanical Engineering, McGill University, Montreal, Canada.
44. Guitton, D. E. and Newman, B. G. (1977) Self-preserving turbulent wall jets over convex surfaces, J. Fluid Mech. 81, 155-185.
45. Hanjalic, K. and Launder, B. E. (1972) A Reynolds-stress model of turbulence and its application to thin shear flows, J. Fluid. Mech. 52, 609-638.
46. Hanjalic, K. and Launder, B. E. (1976) Contribution towards a Reynolds-stress closure for low-Reynolds-number turbulence. J. Fluid Mech. 74, 593-610.
47. de Henau, V., Raithby, G. D. and Thompson, B. E. (1990) Prediction of flows with strong curvature and pressure gradient using the k-ε turbulence model, J. Fluids Engng 112, 40-47.
48. Hoffmann, P. H. and Bradshaw, P. (1978) Turbulent boundary layers on surfaces of mild longitudinal curvature. IC Aeronautics Report 78-04. Department of Aeronautics, Imperial College, London.
49. Hoffmann, P. H., Muck, K. C. and Bradshaw, P. (1985) The effect of concave surface curvature on turbulent boundary layers, J. Fluid Mech. 161, 371-403.
50. Honami, S., Ariga, I., Abe, T. and Watanabe, I. (1975) Investigation of turbulent flows in curved channels. ASME Paper 75-FE-32.
51. Howarth, L. (1951) The boundary layer in three-dimensional flow. Part I: derivation of the equations for flow along a general curved surface, Phil. Mag. 42, 1433.
52. Hunt, I. A. and Joubert, P. M. (1979) Effects of small streamline curvature on turbulent duct flow, J. Fluid Mech. 91, 633-659.
53. Irwin, H. P. A. and Smith, P. A. (1975) Prediction of the effect of streamline curvature on turbulence, Phys. Fluids 18, 624-630.
54. Jeans, A. H. and Johnston, J. P. (1982) The effects of concave curvature on turbulent boundary layer structure. In: Report MD-40, Thermosciences Division, Department of Mechanical Engineering, Stanford University, Stanford, CA.
55. Jeans, A. H. and Johnston, J. P. (1983) The effects of concave curvature on turbulent boundary layer structure. In: IUTAM Sym. on Structure of Complex Turbulent Shear Flow (ed. R. Dumas and L. Fulachier). Springer, New York.
56. Jones, W. P. and Launder, B. E. (1972) The prediction of laminarization with a two-equation model of turbulence, Int. J. Heat Mass Transfer 15, 301-314.
57. Kim, W. J. and Patel, V. C. (1994) Origin and decay of longitudinal vortices in developing flow in a curved rectangular duct, J. Fluids Engng 116, 45-52.
58. Kim, W. J. and Patel, V. C. (1994) Influence of streamwise curvature on longitudinal vortices imbedded in turbulent boundary layers, Comput. Fluids 23, 647-673.
59. Klebanoff, P. S. (1951) Characteristics of turbulence in a boundary layer with zero pressure gradient, NACA TM 1314.
60. Kline, S. J., Cantwell, B. J. and Lilly, G. M. (Editors) (1982) Proceedings of the 1980-81 AFOSR-HTTM-Stanford Conference on Complex Turbulent Flows, Vol. 1-3, Department of Mechanical Engineering, Stanford University, Stanford, CA.
61. Kobayashi, M. (1995) Experimental investigation of turbulence-transport mechanisms in two-dimensional curved bends, D. Eng. thesis, Niigata University, Japan.
62. Kobayashi, M., Maekawa, H., Takano, T., Uchiyama, N., Kubota, M. and Kobayashi, Y. (1989) Two-dimensional turbulent flow in a curved channel, Jap. Soc. Mech. Engng Int. J. 32, 324-331.
63. Kobayashi, M., Maekawa, H., Takano, T. and Hayakawa, S. (1991) An experimental study on a turbulent flow in a two-dimensional curved channel (time-mean velocity and multiple velocity correlations in the entrance section), Trans. Jap. Soc. Mech. Engng 57/544B, 4064-4071.
64. Kobayashi, M., Maekawa, H. and Uchiyama, K. (1993) Turbulent flow accompanied by Taylor-Görtler vortices in a two-dimensional curved channel. In: Proc. 9th Sym. Turb. Shear Flows, Kyoto, Japan. See also Flow Meas. Instrum. 6, 93-100 (1995).
65. Kobayashi, M., Maekawa, H. and Uchiyama, K. (1993) Turbulent flow accompanied by Taylor-Görtler vortices in a two-dimensional curved channel. In: Proc. 9th Sym. Turb. Shear Flows, Kyoto, Japan. See also Flow Meas. Instrum. 6, 93-100 (1995).
66. Kobayashi, M., Maekawa, H., Shimizu, Y. and Uchiyama, K. (1994) Experimental study on turbulent flow in two-dimensional curved channel (space/time correlations and spectra of velocity fluctuations), Jap. Soc. Mech. Engng Int. J. 37, 38-46.
67. Lai, Y. G. and So, R. M. C. (1990) On near-wall turbulent flow modeling, J. Fluid. Mech. 221, 641-673.
68. Launder, B. E. and Li, S. P. (1994) On the elimination of wall-topography parameters from second-moment closure, Phys. Fluids 6, 999-1006.
69. Launder, B. E. and Shima, N. (1989) Second-moment closure for the near-wall sublayer: development and application, AIAA J. 27, 1319-1325.
70. Launder, B. E. and Spalding, D. B. (1974) The numerical calculation of turbulent flows, Comput. Meth. Appl. Mech. Engng 3, 267.
71. Launder, B. E., Reece, G. J. and Rodi, W. (1975) Progress in the development of a Reynolds-stress turbulence closure, J. Fluid Mech. 68, 537-566.
72. Launder, B. E., Priddin, C. H. and Sharma, B. I. (1977) The calculation of turbulent boundary layers on spinning and curved surfaces, J. Fluids Engng 99, 231-239.
73. Liepmann, H. W. (1945) Investigation of boundary layer transition on concave walls. NACA ACR-4J28.
74. Leschziner, M. A. (1982) An introduction and guide to PASSABLE. Thermofluids Division, Department of Mechanical Engineering Report, University Manchester Institute Science Technology, Manchester.
75. Leschziner, M. A. and Rodi, W. (1981) Calculation of annular and twin parallel jets using various discretization schemes and turbulence-model variations, J. Fluids Engng 103, 352-360.
76. Lumley, J. L. (1980) Second order modelling of turbulent flows. In: Prediction Methods for Turbulent Flows (ed. W. Kollmann), Hemisphere, New York.
77. Lumley, J. L., Zeman, O. and Siess, J. (1978) The influence of buoyancy on turbulent transport, J. Fluid Mech. 84, 581-597.
78. Luo, J. and Lakshminarayana, B. (1995) Prediction of strongly curved turbulent duct flows with Reynolds stress model. Paper AIAA 95-2241.
79. Luo, J. and Lakshminarayana, B. (1995) Analysis of streamline curvature effects on wall-bounded turbulent flows (unpublished manuscript).
80. Mehta, R. D. and Bradshaw, P. (1988) Longitudinal vortices imbedded in turbulent boundary layers. Part 2. Vortex pair with common flow upwards, J. Fluid. Mech. 188, 529-546.
81. Mellor, G. L. (1966) The effects of pressure gradients on turbulent flow near a smooth wall, J. Fluid. Mech. 24, 255-274.
82. Mellor, G. L. and Herring, J. H. (1973) A survey of mean turbulent field closure models, AIAA J. 11, 590-599.
83. Meroney, R. N. and Bradshaw, P. B. (1975) Turbulent boundary-layer growth over a longitudinally curved surface. AIAA J. 13, 1448-1453.
84. Militzer, J., Nicoll, W. B. and Alpay, J. A. (1977) Some observations on the numerical calculation of the recirculation region of twin parallel symmetric jet flow. In: Proc. Symp. Turb. Shear Flows, Pennsylvania State University, University Park, PA, pp. 18.11-18.18.
85. Mokhtari, S. and Bradshaw, P. (1983) Longitudinal vortices in wind tunnel wall boundary layer, Aeronaut. J. 87, 233-236.
86. Moser, R. D. and Moin, P. (1987) The effects of curvature in wall-bounded turbulent flows, J. Fluid, Mech. 175, 479-510.
87. Moss, M. D. and Baker, S. (1980) Recirculating flows associated with two-dimensional steps, Aeronaut. Q. 31, 151-172.
88. Muck, K. C., Hoffmann, P. H. and Bradshaw, P. (1985) The effect of convex surface curvature on turbulent boundary layers, J. Fluid. Mech. 161, 347-369.
89. Nakayama, A. (1985) Characteristics of the flow around conventional and supercritical airfoils, J. Fluid. Mech. 160, 155-179.
90. Naot, D., Shavit, A. and Wolfshtein, M. (1970) Interactions between components of the turbulent velocity correlation tensor, Israel J. Technol. 8, 259.
91. Narashima, R. and Ojha, S. K. (1966) Effect of longitudinal surface curvature on boundary layers, Indian Institute of Science, Bangalore, India, Report AE 164A.
92. Nash, J. F. and Patel, V. C. (1972) Three-dimensional Turbulent Boundary Layers, SBC, Atlanta, GA.
93. Park, S. W. and Chung, M. K. (1989) Curvature-dependent two-equation model for prediction of turbulent recirculating flows, AIAA J. 27, 340-344.
94. Park, S. B., Chung, M. K. and Choi, D. H. (1991) Reynolds-stress model analysis of turbulent flow over a curved axisymmetric body, AIAA J. 29, 591-594.
95. Patankar, S. V. and Spalding, D. B. (1970) Heat and Mass Transfer in Boundary Layers, 2nd edn. Intertext, London.
96. Patel, V. C. (1965) Calibration of the Preston tube and limitations on its use in pressure gradients, J. Fluid. Mech. 23, 185-208.
97. Patel, V. C. (1969) Measurements of secondary flow in the boundary layer of a 180 degree curved channel. ARC CP No. 1043, Aeronautical Research Council, London.
98. Patel, V. C. (1969) The effects of curvature on the turbulent boundary layer. R&M 3599, Aeronautical Research Council, London.
99. Patel, V. C. (1973) A unified view of the law of the wall using mixing-length theory, Aeronaut. Q. 24, 55-70.
100. Patel, V. C. and Back, J. H. (1987) Boundary layers in planes of symmetry, part 1: experiments in turbulent flow, AIAA J. 25, 550-559.
101. Patel, V. C. and Head, M. R. (1968) Reversion of turbulent to laminar flow, J. Fluid Mech. 24, 371-392.
102. Patel, V. C., Rodi, W. and Scheuerer, G. (1985) Turbulence models for near-wall and low-Reynolds number flows: a review, AIAA J. 23, 1308-1319.
103. Pauley, W. R. and Eaton, J. K. (1988) Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer, AIAA J. 26, 816-823.
104. Pourahmadi, F. and Humphrey, J. A. C. (1983) Prediction of curved channel flow with an extended k-ε model of turbulence, AIAA J. 21, 1365-1373.
105. Prabhu, A. and Rao, B. N. S. (1985) Turbulent boundary layers in a longitudinally curved stream. Department of Aerospace Engineering Report 81-FM-10, Indian Institute of Science, Bangalore, India.
106. Prabhu, A., Narasimha, R. and Rao, B. N. S. (1983) Structure and mean-flow similarity in curved turbulent boundary layers. In: IUTAM Sym. on Structure of Complex Turbulent Shear Flow (eds R. Dumas and L. Fulachier), Springer, New York.
107. Prandtl, L. (1929) Sonderdruck aus vortrage aus den gebiete der aerodynamik und verwandter gebiete, Aachen, NACA Tech. Memo 625.
108. Priddin, C. H. (1975) The behaviour of the turbulent boundary layer on curved porous walls. Ph.D. thesis, University London.
109. Ragab, S. (1979) Interacting inviscid and laminar viscous flows and some aspects of their stability. Ph.D. dissertation, University Microfilm 8020226, Virginia Polytechnic Institute and State University, Blacksburg, VA.
110. Ramaprian, B. R. and Shivaprasad, B. G. (1978) The structure of turbulent boundary layers along mildly curved surfaces, J. Fluid Mech. 85, 273-303.
111. Richmond, M. C. and Patel, V. C. (1991) Convex and concave surface curvature effects in wall-bounded turbulent flows, AIAA J. 29, 895-902.
112. Rodi, W. (1976) A new algebraic relation for calculating Reynolds stresses, ZAMM 56, 219.
113. Rodi, W. (1980) Turbulence Models and Their Applications in Hydraulics. IAHR Monograph, Delft, The Netherlands.
114. Rodi, W. (1991) Experience with two-layer models combining the k-ε model with a one-equation model near the wall. AIAA Paper 91-216.
115. Rodi, W. and Scheuerer, G. (1983) Calculation of curved shear layers with two-equation turbulence models, Phys. Fluids 26, 1422-1436.
116. Rotta, J. C. (1951) Statistische theorie nichthomogener turbulenz, Z. Phys. 129, 547-572.
117. Rotta, J. C. (1967) Effect of streamwise wall curvature on compressible turbulent boundary layers. Phys. Fluids Suppl. S174-S180.
118. Rotta, J. C. (1968) Uber eine methode zur berechnung turbulenter scherströmungen. Report 69A14, Aerodynamische Versuchanstalt, Göttingen.
119. Sandborn, V. A. and Shin, J. C. (1989) Water flow measurements in a 180 degree turn-around duct. Report for Contract No. NAS8-36354, Colorado State University, Fort Collins, CO.
120. Schubauer, G. B. and Klebanoff, P. S. (1951) Investigation of separation of the turbulent boundary layer. NACA Report 1030.
121. Schultz-Grunow, F. and Breuer, W. (1963) Laminar boundary layers at curved surfaces, Institut für Mechanik, University of Aachen, Aachen, Germany, Report 3.
122. Shabaka, I. M. M. A., Mehta, R. D. and Bradshaw, P. (1985) Longitudinal vortices imbedded in turbulent boundary layers. Part 1. single vortex, J. Fluid Mech. 155, 37-57.
123. Shima, N. (1993) Prediction of turbulent boundary layers with second-moment closure: part II - effects of streamline curvature and spanwise rotation, J. Fluids Engng 115, 56-63.
124. Shizawa, T. and Honami, S. (1983) Experiments on turbulent boundary layers over a concave surface: effects of introduction of curvature. In: Proc. 4th Sym. Turb. Shear Flows, Karlsruhe.
125. Shizawa, T. and Honami, S. (1985) Experiments on turbulent boundary layers over a concave surface: response of turbulence to curvature, Proc. 5th Sym. Turb. Shear Flows, Ithaca, New York.
126. Simon, T. W. and Moffat, R. J. (1983) Turbulent boundary layer heat transfer experiments: a separate effects study on a convexly curved wall, J. Heat Transfer 105, 835-840.
127. Simpson, R. L., Chew, Y. T. and Shivaprasad, B. G. (1981) The structure of a separating turbulent boundary layer. Part 1. Mean flow and Reynolds stresses, J. Fluid Mech. 113, 23-51.
128. Simpson, R. L., Chew, Y. T. and Shivaprasad, B. G. (1981) The structure of a separating turbulent boundary layer. Part 2. Higher order turbulent results, J. Fluid Mech. 113, 53-73.
129. Smits, A. J., Young, S. T. B. and Bradshaw, P. (1979) The effect of short regions of high surface curvature on turbulent boundary layers, J. Fluid Mech. 94, 209-242.
130. So, R. M. C. (1975) A turbulent velocity scale for curved shear flows, J. Fluid Mech. 70, 37-57.
131. So, R. M. C. (1975) Effects of streamline curvature on the law of the wall. In: Proc. I2th Ann. Meet. Soc. Engineering Sci., University Texas, Austin, TX, pp. 787-796.
132. So, R. M. C. and Mellor, G. L. (1973) Experiment on convex curvature effects in turbulent boundary layers, J. Fluid Mech. 60, 43-62.
133. So, R. M. C. and Mellor, G. L. (1975) Experiment on turbulent boundary layers on a concave wall, Aeronaut. Q. 26, 25-40.
134. So, R. M. C. and Mellor, G. L. (1978) Turbulent boundary layers with large streamwise curvature, ZAMP 29, 54-74.
135. So, R. M. C., Lai, Y. G. and Hwang, B. C. (1991) Near-wall turbulence closure for curved flows, AIAA J. 29, 1202-1213.
136. So, R. M. C., Lai, Y. G., Zhang, H. S. and Hwang, B. C. (1991) Second-order near-wall turbulence closure: a review, AIAA J. 29, 1819-1835.
137. Sotiropoulos, F. and Patel, V. C. (1995) Turbulence anisotropy and near-wall modeling in predicting three-dimensional shear-flows, AIAA J. 33, 504-514.
138. θ = 1400, J. Fluid Mech. 187, 67-98.
139. Spalart, P. R. and Allmaras, S. R. (1994) A one-equation turbulence model for aerodynamic flows, Recherche Aerospatiale, 1, 5-21.
140. Spalding, D. B. (1977) GENMIX - A General Computer Program for Two-Dimensional Parabolic Phenomena. Pergamon Press, Oxford.
141. Speziale, C. G., Abid, R. and Anderson, E. C. (1990) A critical evaluation of two-equation models for near wall turbulence. AIAA Paper 90-1481.
142. Speziale, C. G., Sarkar, S. and Gatski, T. B. (1991) Modelling the pressure-strain correlation of turbulence - An invariant dynamical systems approach, J. Fluid Mech. 227, 245-272.
143. Tani, I. (1962) Production of longitudinal vortices in the boundary layer along a concave wall, J. Geophys. Res. 67, 3075-3080.
144. Taylor, G. I. (1923) Stability of a viscous liquid contained between two rotating cylinders, Phil. Trans. R. Soc. 223A, 289-343.
145. Townsend, A. A. (1961) Equilibrium layers and wall turbulence, J. Fluid Mech. 11, 97-120.
146. van den Berg, B. (1975) A three-dimensional law of the wall for turbulent shear flows, J. Fluid Mech. 70, 149-160.
147. van Driest, E. R. (1956) On turbulent flow near a wall, J Aeronaut. Sci. 23, 1007.
148. Wattendorf, F. L. (1935) A study of the effect of curvature on fully developed turbulent flow, Proc. R. Soc. 148, 565.
149. Westphal, R. V., Eaton, J. K. and Pauley, W. R. (1985) Interaction between a vortex and a turbulent boundary layer in a streamwise pressure gradient. In: Proc. 5th Sym. Turb. Shear Flows, Ithaca, New York.
150. Wilcken, H. (1930) Turbulence grenzschichten an gewölbten flächen, lngng Arch. 1, 357.
151. Wilcox, D. C. (1993) Turbulence Modeling for CFD. DCW, La Cañada, CA.
152. Wilcox, D. C. and Chambers, T. L. (1977) Streamline curvature effects on turbulent boundary layers, AIAA J. 15, 574-580.
153. You, S. M., Simon, T. W. and Kim, J. (1986) Boundary layer heat transfer and fluid mechanics measurements in a mildly curved convex wall, Proceedings of the Eighth International Heat Transfer Conference, San Francisco, CA, Vol. 3, pp. 1089-1094.
154. Zeierman, S. and Wolfstein, M. (1986) Turbulent time scale for turbulent-flow calculations, AIAA J. 24, 1606-1610.