Creep crack growth behavior of aluminum alloy 2519: Part II - numerical analysis

ASTM Special Technical Publication

Volumn 1297, Issue , 1997, Pages 19-36

  Hall, David E ^a   Hamilton, B Carter ^b   McDowell, David L ^c   Saxena, Ashok ^b  

^a LOUISIANA TECH UNIVERSITY   (United States)

^b Georgia Institute of Technology   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Aluminum; Crack; Creep; Creep brittle; Finite element analysis; Fracture; Propagation

Indexed keywords

ALGORITHMS; ALUMINUM ALLOYS; CORRELATION METHODS; CRACK PROPAGATION; FINITE ELEMENT METHOD; FRACTURE; HIGH TEMPERATURE EFFECTS; MATHEMATICAL MODELS; NUMERICAL ANALYSIS; STRAIN RATE; STRESS INTENSITY FACTORS;

CRACK GROWTH RATE; CREEP BRITTLE FRACTURE CHARACTERISTICS; CREEP CRACK GROWTH; FINITE ELEMENT NODE; HIGH TEMPERATURE FRACTURE;

CREEP;

EID: 0030836186     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp16315s     Document Type: Article

References (27)

1. Dogan, B., Saxena, A., and Schwalbe, K.-H., "Creep Crack Growth in Creep-Brittle Ti-6242 Alloys," Materials at High Temperatures, Vol. 10, No. 2, 1992, pp. 138-143.
2. Bensussan, P., Maas, E., Pelloux, R., and Pineau, A., "Creep Crack Initiation and Propagation: Fracture Mechanics and Local Approach," Journal of Pressure Vessel Technology, Vol. 110, 1988, pp. 42-50.
3. Hamilton, B. C., "Creep Crack Growth Behavior of Aluminum Alloy 2519," Master's thesis, Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, November 1994.
4. Gill, Y., "Creep Crack Growth Characterization of SA-106 C Carbon Steel," Ph.D. thesis, Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, March 1994.
5. Jones, K. A., "The Creep Behavior of Aluminum Alloy 8009," Master's thesis, Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, September 1993.
6. Leng, Y., Porr, W. C., Jr., and Gangloff, R. P., "Time Dependent Crack Growth in P/M Al-Fe-V-Si at Elevated Temperatures," Scripta Metallurgica et Materialia, Vol. 25, 1991, pp. 895-900.
7. Riedel, H. and Rice, J. R., "Tensile Cracks in Creeping Solids," Fracture Mechanics: 12th Conference, ASTM STP 700, American Society for Testing and Materials, West Conshohocken, PA, 1980, pp. 112-130.
8. Bassani, J. L. and McClintock, F. A., "Creep Relaxation of Stress Around a Crack Tip," International Journal of Solids and Structures, Vol. 7, 1981, pp. 479-492.
9. Hutchinson, J. W., "Singular Behavior at the End of a Tensile Crack in a Hardening Material," Journal of Mechanics and Physics of Solids, Vol. 16, 1968, pp. 13-31.
10. Rice, J. R. and Rosengren, G. F., "Plane Strain Deformation Near a Crack Tip in a Power-Law Hardening Material," Journal of Mechanics and Physics of Solids, Vol. 16, 1968, pp. 1-12.
11. Landes, J. D. and Begley, J. A., "A Fracture Mechanics Approach to Creep Crack Growth," ASTM STP 590, American Society for Testing and Materials, West Conshohocken, PA, 1976, pp. 128-148.
12. Nikbin, K. M., Webster, G. A., and Turner, C. E., "Relevance of Nonlinear Fracture Mechanics to Creep Cracking," Cracks and Fracture (9th Conference), ASTM STP 601, American Society for Testing and Materials, 1976, pp. 47-62.
13. Hui, C. Y. and Riedel, H., "The Asymptotic Stress and Strain Field Near the Tip of a Growing Crack Under Creep Conditions," International Journal of Fracture, Vol. 17, No. 4, 1981, pp. 409-425.
14. Hawk, D. E. and Bassani, J. L., "Transient Crack Growth Under Creep Conditions," Journal of Mechanics and Physics of Solids, Vol. 34, No. 3, 1986, pp. 191-212.
15. Hui, C. Y., "The Mechanics of Self-Similar Crack Growth in an Elastic Power-Law Creeping Material," International Journal of Solids and Structures, Vol. 22, No. 4, 1986, pp. 357-372.
16. Riedel, H., "Creep Deformation at Crack Tips in Elastic-Viscoplastic Solids," Journal of Mechanics and Physics of Solids, Vol. 29, 1981, pp. 35-49.
17. Chang, T. C., Popelar, C. H., and Staab, G. H., "Creep Crack Growth in an Elastic-Creeping Material Part II: Mode I," International Journal of Fracture, Vol. 33, 1987, pp. 31-45.
18. t Parameter," International Journal of Fracture, Vol. 46, 1990, pp. 81-104.
19. Moyer, T. E. and Liebowitz, H., "Creep Crack Growth Modeling and Near Tip Stress Fields," Engineering Fracture Mechanics, Vol. 28, No. 5/6, 1987, pp. 601-621.
20. t Parameter for Characterizing Creep Crack Growth Rate in the Transient Regime," Nonlinear Fracture Mechanics, ASTM STP 995, American Society for Testing and Materials, West Conshohocken, PA, 1989, pp. 7-26.
21. Saxena, A., "Creep Crack Growth Under Non Steady-State Conditions," Fracture Mechanics (17th Volume), ASTM STP 905, American Society for Testing and Materials, West Conshohocken, PA, 1986, pp. 185-201.
22. Saxena, A. and Landes, J. D., "Characterization of Creep Crack Growth in Metals," Advances in Fracture Research, Sixth International Conference on Fracture, Pergamon Press, New York, 1984, pp. 3977-3988.
23. Wu, F.-H., Bassani, J. L., and Vitek, V., "Transient Crack Growth Under Creep Conditions Due to Grain-Boundary Cavitation," Journal of Mechanics and Physics of Solids, Vol. 34, 1986, pp. 455-475.
24. Hibbitt, Karlsson, & Sorensen, Inc., ABAQUS, Version 5.2, 1992.
25. Hall, D. E., "Analysis of Crack Growth in Creep-Brittle Materials," Ph.D. thesis, Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, July 1995.
26. Adefris, N. B., "Creep-Fatigue Crack Growth Behavior of 1%Cr-1%Mo-1/4%V Rotor Steel," Ph.D. thesis, Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 1993.
27. Hall, D. E., McDowell, D. L. and Saxena, A., "Some Aspects of Crack Growth in Creep-Brittle Materials," Proceedings, International Symposium for Inelastic Deformation, Damage and Life Analysis, Honolulu, Hawaii, 30 July-3 Aug. 1995, ASME, New York.