Some conditions for rupture of polymer liquids in extension

Journal of Rheology

Volumn 41, Issue 1, 1997, Pages 1-25

  Malkin, A Ya ^a   Petrie, C J S ^b  

^a Research Institute of Plastics   (Russian Federation)

^b NEWCASTLE UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; ELASTICITY; FLOW OF FLUIDS; LIQUIDS; MOLECULAR WEIGHT DISTRIBUTION; POLYMERS; STRAIN RATE; STRESSES; VISCOSITY;

POLYMER LIQUIDS; POLYMER MELTS; RUPTURE; SHEAR VISCOSITY; STEADY ELONGATION FLOW; WEISSENBERG NUMBER;

RHEOLOGY;

EID: 0030834708     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.550881     Document Type: Article

References (60)

1. Bartenev, G.M. and Yu.S. Zuev, "Time Dependent Strength," Ch. 6 of Strength and Rupture of Elastomers (in Russian) (Khimiya, Moscow, 1964). There is an English translation of this under the title Strength and Failure of Visco-elastic Materials (which is a slight mistranslation of the Russian "Prochnost i razrushenie vysokoelasticheskikh materialov") (Pergamon, Oxford, 1968).
2. Bartenev, G.M. and Yu.S. Zuev, "Time Dependent Strength," Ch. 6 of Strength and Rupture of Elastomers (in Russian) (Khimiya, Moscow, 1964). There is an English translation of this under the title Strength and Failure of Visco-elastic Materials (which is a slight mistranslation of the Russian "Prochnost i razrushenie vysokoelasticheskikh materialov") (Pergamon, Oxford, 1968).
3. Bird, R.B., C.F. Curtiss, R.C. Armstrong, and O. Hassager, Dynamics of Polymeric Liquids, Vol. 2: Kinetic Theory, 2nd ed. (Wiley, New York, 1987).
4. Cogswell, F.N., J.G.H. Gray, and D.A. Hubbard, "Rheology of a fluid whose behaviour approximates to that of a Maxwell body," Bull. Brit. Soc. Rheol. 15, 29-31 (1972).
5. Cogswell, F.N. and D.R. Moore, "A comparison between simple shear, elongation and equal biaxial extension," Polym. Eng. Sci. 14, 573-576 (1974).
6. Cogswell, F.N., "Polymer melt rheology during elongational flow," Appl. Polym. Symp. 27, 1-18 (1975).
7. Crissman, J.M. and L.J. Zapas, "Creep failure and fracture of polyethylene in uniaxial extension," Polym. Eng. Sci. 19, 99-103 (1979).
8. Dreval, V.E., G.V. Vinogradov, and B.V. Radushkevich, "Dependence of maximum recoverable deformation of linear flexible-chain polymers on limiting extension of chains," J. Polym. Sci: Polym. Phys. 22, 1155-1162 (1984).
9. Eirich, F.R. and T.L. Smith, in Fracture. An Advanced Treatise, Vol. 7: Fracture of Non-Metals and Composites, edited by H. Leibowitz (Academic, New York, 1972).
10. Ghijsels, A. and J. De Clippeleir, "Melt strength behaviour of polypropylenes," Intern. Polym. Proc. 9, 252-257 (1994).
11. Hinch, E.J., "Inhibition of a stretching flow of limited force," in Polymer-Flow Interaction, edited by Y. Rabin (American Institute of Physics, New York, 1985), pp. 59-69.
12. Ide, Y. and J.L. White, "Investigation of failure during elongational flow of polymer melts," J. Non-Newt. Fluid Mech. 2, 281-298 (1977).
13. Ide, Y. and J.L. White, "Experimental study of elongational flow and failure of polymer melts," J. Appl. Polym. Sci. 22, 1061-1079 (1978).
14. Kamei, E. and S. Onogi, "Extensional and fractural properties of monodisperse polystyrenes at elevated temperatures," Appl. Polym. Symp. 27, 19-46 (1975).
15. Kausch, H.H., Polymer Fracture (Springer, Berlin, 1978).
16. Kaye, A. and A.J. Kennett, "Constrained elastic recovery of a polymeric liquid after various shear flow histories," Rheol. Acta 13, 916-923 (1974).
17. Kurbanaliev, M.K., E.K. Borisenkova, G.V. Vinogradov, and A.Ya. Malkin, "Durability of linear polymers above their glass transition temperature in complicated régimes of deformation," Vysokomol. Soedin. B 24, 591-596 (1982) (in Russian).
18. Larson, R.G., "Instabilities in viscoelastic flows," Rheol. Acta 31, 213-263 (1992).
19. Laun, H.M. and H. Schuch, "Transient elongational viscosities and drawability of polymer melts," J. Rheol. 33, 119-175 (1989).
20. Lodge, A.S., Elastic Liquids (Academic, London, 1964).
21. Malkin, A.Ya. and A.E. Teishev, "Flow curve - molecular weight distribution: Is the solution of the inverse problem possible?" Polym. Eng. Sci. 31, 1590-1596 (1991).
22. Malkin, A.Ya. and G.V. Vinogradov, "Fracture of polymers in the visco-fluid state on stretching," Polymer Science USSR 27, 245-257 (1985). [English Translation of Vysokomolekulyarnye Soyedineniya Seriye A 27, 227-237 (1985)].
23. Malkin, A.Ya. and G.V. Vinogradov, "Fracture of polymers in the visco-fluid state on stretching," Polymer Science USSR 27, 245-257 (1985). [English Translation of Vysokomolekulyarnye Soyedineniya Seriye A 27, 227-237 (1985)].
24. Malkin, A.Ya., "Non-linearity in rheology - an essay of classification,¶ Rheol. Acta 34, 27-39 (1995).
25. Markovich, P. and M. Renardy, "A finite difference study of the stretching and break-up of filaments of polymer solutions," J. Non-Newt. Fluid Mech. 17, 13-22 (1985).
26. Meissner, J., "Experimental aspects in polymer melt elongational rheometry," Chem. Eng. Commun. 33, 159-180 (1985a).
27. Meissner, J., "Rheometry of polymer melts," Annu. Rev. Fluid Mech. 17, 45-64 (1985b).
28. Mewis, J. and C.J.S. Petrie, "Hydrodynamics of spinning polymers," in Encyclopedia of Fluid Mechanics, Vol. 6, edited by N.P. Cheremisinoff (Gulf, Houston, 1987), pp. 111-139.
29. Moore, K.A., "A theoretical study of spinning a dilute polymer solution," in Stretching Flows, edited by J. Ferguson, N.E. Hudson, and C.J.S. Petrie (British Society of Rheology, Edinburgh, 1977), pp. 13-15.
30. Münstedt, H. and H.M. Laun, "Elongational properties (and the recoverable strain in the steady state of elongation) and molecular structure of polyethylene melts," Rheol. Acta 20, 211-222 (1981).
31. Pearson, J.R.A., "Instability of non-Newtonian flow," Annu. Rev. Fluid Mech. 8, 163-181 (1976).
32. Pearson, G.H. and R.W. Connelly, "The use of extensional rheometry to establish operating parameters for stretching processes," J. Appl. Polym. Sci. 27, 969-981 (1982).
33. Petrie, C.J.S., "Some problems in unsteady flows for co-rotational rheological models," in Proceedings of the VIIth International Congress on Rheology, edited by C. Klason and J. Kubát (Swedish Society of Rheology, Gothenburg, 1976), pp. 446-447.
34. Petrie, C.J.S. and M.M. Denn, "Instabilities in polymer processing," AIChE. J. 22, 209-236 (1976).
35. Petrie, C.J.S., Elongational Flows (Pitman, London, 1979).
36. Petrie, C.J.S., "Some remarks on the stability of extensional flows," Progress and Trends in Rheology II, 9-14 (1988).
37. Petrie, C.J.S., "Recoverable strain in theory," in Proceedings of the XIth International Congress on Rheology, edited by P. Moldenaers and R. Keunings (Elsevier, Amsterdam, 1992), Vol. 1, pp. 106-108.
38. Petrie, C.J.S., "Extensional flow - a mathematical perspective," Rheol. Acta 34, 12-26 (1995).
39. Rallison, J.M. and E.J. Hinch, "Do we understand the physics in the constitutive equation?" J. Non-Newt. Fluid Mech. 29, 37-55 (1988).
40. Reiner, M., "Preface," in Second-Order Effects in Elasticity, Plasticity and Fluid Dynamics, edited by Reiner, M. and D. Abir (Pergamon, Oxford, 1964) pp. vi-xi.
41. Reiner, M. and A. Freudenthal, "Failure of a material showing creep (a dynamical theory of strength)," Proc. 5th International Congress on Applied Mechanics, 228-233 (1938). [Reprinted im: Reiner, M., Selected Papers (Elsevier, Amsterdam, 1975), pp. 141-148.]
42. Reiner, M. and A. Freudenthal, "Failure of a material showing creep (a dynamical theory of strength)," Proc. 5th International Congress on Applied Mechanics, 228-233 (1938). [Reprinted im: Reiner, M., Selected Papers (Elsevier, Amsterdam, 1975), pp. 141-148.]
43. Revenu, P., J. Guillet, and C. Carrot, "Elongational flow of polyethylenes in isothermal melt spinning," J. Rheol. 37, 1041-1056 (1993).
44. Smith, T.L., "Dependence of the ultimate properties of a GR-S rubber on strain rate and temperature," J. Polym. Sci. 32, 99-113 (1958).
45. Smith, T.L., "Strength and extensibility of elastomers," in Rheology, Vol. 5, edited by F.R. Eirich (Academic, New York, 1969).
46. Takaki, T. and D.C. Bogue, "The extensional and failure properties of polymer melts," J. Appl. Polym. Sci. 19, 419-433 (1975).
47. Vincent, P.I., "The necking and cold-drawing of rigid plastics," Polymer 1, 7-19 (1960).
48. Vinogradov, G.V., "Viscoelasticity and fracture phenomenon in uniaxial extension of high-molecular linear polymers," Rheol. Acta 14, 942-954 (1975).
49. Vinogradov, G.V., A.Ya. Malkin, and V.V. Volosevitch, "Some fundamental problems in viscoelastic behaviour of polymers in shear and extension," Appl. Polym. Symp. 27, 47-59 (1975a).
50. Vinogradov, G.V., A.Ya. Malkin, V.V. Volosevitch, V.P. Shatalov, and V.P. Yudin, "Flow, high-elastic (recoverable) deformations and rupture of uncured high molecular weight linear polymers in uniaxial extension," J. Polym. Sci: Polym. Phys. 13, 1721-1735 (1975b).
51. Vinogradov, G.V., "Ultimate regimes of deformation of linear flexible chain fluid polymers," Polymer 18, 1275-1285 (1977a).
52. Vinogradov, G.V., "Ultimate regimes of deformation of linear flexible-chain fluid polymers," in Stretching Flows, edited by J. Ferguson, N.E. Hudson, and C.J.S. Petrie (British Society of Rheology, Edinburgh, 1977b), pp. 28-30.
53. Vinogradov, G.V. and A.Ya. Malkin, Rheology of Polymers (Mir, Moscow, 1980). (Translated from the 1977 Russian edition).
54. Vinogradov, G.V., V.E. Dreval, E.K. Borisenkova, M.K. Kurbanaliev, and V.G. Shalganova, "Uniaxial extension of linear flexible-chain polymers in an extremely broad range of stresses and strain rates," Rheol. Acta 20, 433-442 (1981).
55. Walters, K., "Extension-dominated flows of polymer solutions with application to EOR," in Proceedings of the Xth International Congress on Rheology, edited by P.H.T. Uhlherr (Australian Society of Rheology, Melbourne, 1988), Vol. 1, pp. 103-109.
56. White, J.L. and Y. Ide, "Instabilities and failure in elongational flow and melt spinning of fibers," J. Appl. Polym. Sci. 22, 3057-3074 (1978).
57. White, J.L., "Dynamics, heat transfer and rheological aspects of melt spinning: a critical review," Polym. Eng. Rev. 1, 297-362 (1981).
58. Yarin, A.L., Free Liquid Jets and Films: Hydrodynamics and Rheology (Longman, Harlow, Essex, 1993).
59. Zapas, L.J. and J.M. Crissman, "An instability leading to failure of polyethylene in uniaxial creep," Polym. Eng. Sci. 19, 104-107 (1979).
60. Ziabicki, A., "Fundamental scientific problems," Ch. 2 of High-Speed Fiber Spinning: Science and Engineering Aspects, edited by A. Ziabicki and H. Kawai (Wiley, New York, 1985), pp. 21-62.