Micromechanical modeling of temperature-dependent initiation fracture toughness in advanced aluminum alloys

ASTM Special Technical Publication

Volumn 1297, Issue , 1997, Pages 165-190

  Haynes, Michael J ^a   Somerday, Brian P ^a   Lach, Cynthia L ^b   Gangloff, Richard P ^a  

^a University of Virginia   (United States)

^b NASA LANGLEY RESEARCH CENTER   (United States)

Author keywords

Aluminum alloys; Ductile fracture; Elevated temperature; Fracture toughness; Micromechanical modeling

Indexed keywords

ALUMINUM ALLOYS; ELASTIC MODULI; FAILURE (MECHANICAL); FRACTOGRAPHY; FRACTURE; HIGH TEMPERATURE EFFECTS; MATHEMATICAL MODELS; STRAIN; STRAIN HARDENING; STRESSES; YIELD STRESS;

CRITICAL PLASTIC STRAIN CONTROLLED MODEL; MICROMECHANICAL MODELING; MICROVOID PROCESSES; TENSILE YIELD STRENGTH;

FRACTURE TOUGHNESS;

EID: 0030822320     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp16323s     Document Type: Article

References (66)

1. Porr, W. C., Jr., "Elevated Temperature Fracture of Advanced Powder Metallurgy Aluminum Alloy 8009," Ph.D. thesis, University of Virginia, Charlottesville, VA, 1992.
2. Porr, W. C., Jr. and Gangloff, R. P., Metallurgical Transactions A, Vol. 25A, 1994, pp. 365-379.
3. Kim, S. S., Haynes, M. J., and Gangloff, R. P., Materials Science and Engineering A, Vol. 203, 1995, pp. 256-271.
4. Haynes, M. J. and Gangloff, R. P., "Elevated Temperature Fracture Toughness of Al-Cu-Mg-Ag Alloy Sheet: Characterization and Modeling," Metallurgical Transactions A, in review, 1996.
5. Somerday, B. P., Leng, Y., and Gangloff, R. P., Fatigue and Fracture of Engineering Material Structures, Vol. 18, 1995, pp. 565-582.
6. Somerday, B. P., "Elevated Temperature Fracture Toughness of a SiC Particulate-Reinforced 2009 Aluminum Composite," Masters thesis, University of Virginia, Charlottesville, VA, 1993.
7. Donald, J. K. and Ruschau, J. in Fatigue Crack Measurement: Techniques and Applications, K. J. Marsh et al., Eds., EMAS, West Midlands, UK, 1991, pp. 11-37.
8. Haynes, M. J. and Gangloff, R. P., "High Resolution R-Curve Characterization of the Fracture Toughness of Thin Sheet Aluminum Alloys," Journal of Testing and Evaluation, in press, 1996.
9. Chan, K. S., Acta Metallurgica, Vol. 37, 1989, pp. 1217-1226.
10. Somerday, B. P., Leng, Y., and Gangloff, R. P., Fatigue and Fracture of Engineering Material Structures, Vol. 18, 1995, pp. 1031-1050.
11. Ritchie, R. O. and Thompson, A. W., Metallurgical Transactions A, Vol. 16A, 1985, pp. 233-248.
12. Rice, J. R. and Johnson, M. A. in Inelastic Behavior of Solids, M. F. Kanninen et al., Eds., McGraw-Hill, New York, NY, 1970, pp. 641-672.
13. Hahn, G. T. and Rosenfield, A. R., Metallurgical Transactions A, Vol. 6A, 1975, pp. 653-668.
14. Van Stone, R. H., Cox, T. B., Low, J. R., and Psioda, J. A., International Metallurgical Reviews, Vol. 30, 1985, pp. 157-179.
15. Thomason, P. F., Ductile Fracture of Metals, Pergamon Press, Oxford, UK, 1990, pp. 105-111.
16. Garrison, W. M., Jr. and Moody, N. R., Journal of Physics and Chemistry of Solids, Vol. 48, 1987, pp. 1035-1074.
17. Rice, J. R. and Tracey, D. M., Journal of Mechanics and Physics of Solids, Vol. 17, 1969, pp. 201-217.
18. Mackenzie, A. C., Hancock, J. W., and Brown, D. K., Engineering Fracture Mechanics, Vol. 9, 1977. pp. 167-188.
19. Argon, A. S., Im, J., and Safoglu, R., Metallurgical Transactions A, Vol. 6A, 1975, pp. 825-837.
20. Goods, S. H. and Brown, L. M., Acta Metallurgica, Vol. 27, 1979, pp. 1-15.
21. LeRoy, G., Embury, J. D., Edwards, G., and Ashby, M. F., Acta Metallurgica, Vol. 29, 1981, pp. 1509-1522.
22. Cox, T. B. and Low, J. R., Jr., Metallurgical Transactions A, Vol. 5A, 1974, pp. 1457-1470.
23. Dubensky, E. M. and Koss, D. A., Metallurgical Transactions A, Vol. 18A, 1987, pp. 1887-1895.
24. Yamamoto, H., International Journal of Fracture, Vol. 14, 1978, pp. 347-365.
25. Pan, J., Saje, M., and Needleman, A., International Journal of Fracture, Vol. 21, 1983, pp. 261-278.
26. Becker, R. and Smelser, R. E., Journal of Mechanics and Physics of Solids, Vol. 42, 1994, pp. 773-796.
27. Hancock, J. W. and Mackenzie, A. C., Journal of Mechanics and Physics of Solids, Vol. 24, 1976, pp. 147-169.
28. Ohno, N. and Hutchinson, J. W., Journal of Mechanics and Physics of Solids, Vol. 32, 1984, pp. 63-85.
29. Pineau, A., in Topics in Fracture and Fatigue, A. S. Argon, Ed., Springer-Verlag, New York, NY, 1992, pp. 197-234.
30. Marini, B., Mudry, F., and Pineau, A., Engineering Fracture Mechanics, Vol. 22, 1985, pp. 989-996.
31. Ritchie, R. O., Server, W. L., and Wullaert, R. O., Metallurgical Transactions A, Vol. 10A, 1977, pp. 1557-1570.
32. Thompson, A. W. and Ashby, M. F., Scripta Metallurgica et Materials, Vol. 18, 1984, pp. 127-130.
33. Hutchinson, J. W., Journal of Mechanics and Physics of Solids, Vol. 16, 1968, pp. 13-31, 337-347.
34. Rice, J. R. and Rosengren, G. F., Journal of Mechanics and Physics of Solids, Vol. 16, 1968, pp. 1-12.
35. McMeeking, R. M., Journal of Mechanics and Physics of Solids, 1977, Vol. 25, pp. 357-381.
36. McMeeking, R. M., Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 99, 1977, pp. 290-297.
37. Bates, R. C. in Metallurgical Treatises, J. K. Tien and J. F. Elliot, Eds., TMS-AIME, Warrendale, PA, 1982, pp. 551-570.
38. Hancock, J. W. and Cowling, M. J., Metal Science, 1980, pp. 293-304.
39. Shih, C. F., Journal of Mechanics and Physics of Solids, Vol. 29, 1981, pp. 305-326.
40. Hutchinson, J. W., Journal of Applied Mechanics, Transactions of the ASME, Vol. 50, 1983, pp. 1042-1051.
41. Walsh, J. A., Jata, K. V., and Starke, E. A., Jr., Acta Metallurgica, Vol. 37, No. 11, 1989, pp. 2861-2871.
42. Somerday, B. P. and Gangloff, R. P., Metallurgical Transactions A, Vol. 25A, 1994, pp. 1471-1479.
43. Blankenship, C. P., Jr. and Starke, E. A., Jr., Acta Metallurgica, Vol. 42, 1994, pp. 845-855.
44. Chellman, D. F., Bayha, T. D., Li, Q., and Wawner, F. E., Jr. in Proceedings of Fourth International Conference on Aluminum Alloys, Vol. 2, T. H. Sanders, Jr. and E. A. Starke, Jr., Eds., Georgia Institute of Technology, Atlanta, GA, 1994, pp. 2-9.
45. Leng, Y., Porr, W. C., Jr., and Gangloff, R. P., Scripta Metallurgica, Vol. 24, No. 11, 1990, pp. 2163-2168.
46. Gangloff, R. P., "NASA-UVA Light Aerospace Alloy and Structures Technology Program," UVA Report No. UVA/528266/MS94/117, University of Virginia, Charlottesville, VA, 1995, pp. 65-79.
47. Mondolfo, L. F., Aluminum Alloys Structure and Properties, Butterworth and Co., Woburn, MA, 1976, p. 82.
48. Cord, C. W., Cotterill, P., and Fitzpatrick, G. A., International Metallurgical Reviews, Vol. 19, 1974, pp. 77-88.
49. Tvergaard, V. and Needleman, A., Acta Metallurgica, Vol. 32, 1984, pp. 157-169.
50. Bridgman, P. W., Studies in Large Plastic Flow and Fracture, McGraw-Hill Book Co., New York, NY, 1952, pp. 9-37.
51. Hancock, J. W. and Brown, D. K., Journal of Mechanics and Physics of Solids, Vol. 31, 1983, pp. 1-24.
52. Earl, J. C. and Brown, D. K., Engineering Fracture Mechanics, Vol. 8, 1976, pp. 599-611.
53. Wilsdorf, H. G. F., Wawner, F. E., Jr., and Wert, J. A., Very High Temperature Aluminum Materials Concepts, Wright Laboratory Report No. WL-TR-91-4022, Wright Patterson Air Force Base, OH, 1991.
54. Gilman, P. S. in Thermal Structures and Materials for High Speed Flight, E. A. Thornton, Ed., AIAA, Washington, DC, Vol. 140, 1992, pp. 141-160.
55. Thomson, R. D. and Hancock, J. W., International Journal of Fracture, Vol. 26, 1984, p. 99-112.
56. Pineau, A. in Advances in Fracture Reserach, ICF5, D. Francois et al., Eds., Pergamon Press, Oxford, UK, 1981, pp. 553-577.
57. Miller, T. C. and Anderson, T. L. in Fracture Mechanics: Twenty-Fourth Volume, ASTM STP 1207, J. D. Landes, D. E. McCabe, and J. A. M. Boulet, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1994, pp. 87-107.
58. Van Stone, R. H., Merchant, R. H., and Low, J. R., Jr., in Fatigue and Fracture Toughness-Cryogenic Behavior, ASTM STP 556, C. F. Hickey, Jr. and R. G. Broadwell, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1974, pp. 93-124.
59. Tanaka, J. P., Pampillo, C. A., and Low, J. R., Jr., in Review of Developments in Plane Strain Fracture Toughness Testing, ASTM STP 463, W. F. Brown, Jr., Ed., American Society for Testing and Materials, West Conshohocken, PA, 1970, pp. 191-215.
60. Argon, A. S. and Im, J., Metallurgical Transactions A, Vol. 6A, 1975, pp. 839-851.
61. Bray, J. W., Handerhan, K. J., Garrison, W. M., Jr., and Thompson, A. W., Metallurgical Transactions A, Vol. 23A, 1992, pp. 485-496.
62. Garrison, W. M., Jr., Metallurgical Transactions A, Vol. 17A, 1986, pp. 669-678.
63. Lee, S., Majno, L., and Asaro, R. J., Metallurgical Transactions A, Vol. 16A, 1985, pp. 1633-1648.
64. Psioda, J. A., "The Effect of Microstructure and Strength on the Fracture Toughness of an 18 Nickel 300 Grade Maraging Steel," Ph.D. thesis, Carnegie Mellon University, Pittsburgh, PA, 1977.
65. Spitzig, W. A., Acta Metallurgica, Vol. 33, 1985, pp. 175-184.
66. Spitzig, W. A., Kelly, J. F., and Richmond, O., Metallography, Vol. 18, 1985, pp. 235-261.