Consideration of processes on the microscale of metallic materials for the development of constitutive models

Acta Mechanica

Volumn 120, Issue , 1997, Pages 1-30

  Steck, E A ^a,b   Gerdes, R ^a,b  

^a Inst F Allg Mech F ^*

^b TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; CRYSTAL STRUCTURE; MATHEMATICAL MODELS; PLASTIC DEFORMATION; POLYCRYSTALLINE MATERIALS;

CONSTITUTIVE MODEL; DISLOCATION MOTION; INTERNAL STRUCTURE; MECHANICAL ACTIVATION; MICROSCALE; STOCHASTIC MODEL; THERMAL ACTIVATION;

METALS;

EID: 0030737216     PISSN: 00015970     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF01174313     Document Type: Review

References (95)

1. Conrad, H.: Thermally activated deformation of metals. J. Metals, 582-588 (1964).
2. Nadgornyi, E.: Dislocation dynamics and mechanical properties of crystals. Prog. Mat. Sci. 31, 1-535 (1988).
3. Kocks, U. F., Argon, A. S., Ashby, M. F.: Thermodynamics and kinetics of slip. Prog. Mat. Sci. 19, 1-17 (1975).
4. Orowan, E.: Problems of plastic gliding. Proc. Phys. Society 52, 8-22 (1940).
5. Nohara, A.: Dislocation-structure changes during the dip-tests and the dynamical internal stress in Al-Mg alloys at high temperatures. Phys. Stat. Sol. A 88 A, 213-222 (1985).
6. Barrett, C. R., Nix, W. D.: A model for steady state creep based on the motion of jogged screw dislocations. Acta Metall. 13, 1247-1258 (1965).
7. Bengus, V. Z.: Effects of the dislocation collective behaviour in plasticity of single crystals. Cryst. Res. Technol. 8, 757-761 (1984).
8. Frost, H. J., Ashby, M. F: Motion of a dislocation acted on by a viscous drag through an array of discrete obstacles. Int. J. Non-Linear Mech. 42, 5273-5279 (1971).
9. Balasubramanian, N., Li, J. C. M.: The activation areas for creep deformation. J. Mat. Sci. 5, 434-444 (1970).
10. Kocks, U. F., Dawson, P. R., Follansbee, P. S.: Physical and phenomenological plasticity. Los Alamos, Center for Materials Science, LA-UR-86-2672 (1986).
11. Frost, H. J., Ashby, M. F.: Deformation-mechanism maps. New York: Pergamon Press 1982.
12. Raj, S. V., Langdon, T. G.: Creep behavior of copper at intermediate temperatures I. Mechanical characteristics. Acta Metall. 37, 843-852 (1989).
13. Krashchenko, V. P., Statsenko, V. E.: Effect of temperature and strain rate on basic processes controlling the strength of copper. Strength Mat. 13, 487-492 (1981).
14. Nabarro, F. R. N.: Steady-state diffusional creep. Phil. Mag. 16, 231-237 (1967).
15. Weertman, J.: Dislocation climb theory of steady-state creep. Trans, ASM., 681-694 (1968).
16. Pueschl, W., Schoeck, G.: Calculation of cross-slip parameters in f.c.c. crystals. Mat. Sci. Eng. A 164, 286-289 (1993).
17. Conrad, H.: An investigation of the rate controlling mechanism for plastic flow of copper crystals at 90K and 170K. Acta Metall. 6, 339-350 (1958).
18. Gindin, J. A., Nechrolod, N. K., Starodubor, Y. D.: Effect of staged low-temperature creep on the resistivity and mechanical properties of copper. Phys. Met. Metall. 26, 107-114 (1968).
19. Guyot, P., Dorn, J. E.: A critical review of the Peierls mechanism. Can. J. Phys. 45, 983-1017 (1967).
20. Herring, C.: Diffusional viscosity of a polycrystalline solid. Int. J. Non-Linear Mech. 21, 437-445 (1950).
21. Coble, R. L.: A model for boundary diffusion controlled creep in polycristalline materials. J. Appl. Phys. 34, 1679-1682 (1963).
22. Sherby, O. D., Miller, A. K.: Combining phenomenology and physics in describing the high temperature mechanical behavior of crystalline solids. J. Eng. Mat. Tech. 101, 387-395 (1979).
23. Conrad, H.: The role of grain boundaries in creep and stress rupture. In: Mechanical behavior of materials (Dorn, J. E., ed.), pp. 218-269, 60-16667. New York: McGraw Hill 1961.
24. Exell, S. F., Warrington, D. H.: Subgrain boundary migration in aluminium. Phil. Mag. 26, 1121 (1972).
25. Biberger, M., Blum, W.: Subgrain boundary migration during creep of LiF (I. Recombination of subgrain boundaries). Phil. Mag. A.66, 757-770 (1992).
26. Biberger, M., Blum, W.: Subgrain boundary migration during creep of LiF (II. Constant-Stress Experiments). Phil. Mag. A.66, 27-40 (1992).
27. Seeger, A., Schoeck, G.: Die Aufspaltung von Versetzungen in Metallen dichtester Kugelpackung. Acta Metall. 1, 519-536 (1953).
28. Duesbery, M. S., Lonat, N. P., Sadananda, K.: The mechanics and energetics of cross-slip. Acta Metall. 40, 149-158 (1992).
29. Weertman, J.: Steady-state creep through dislocation climb. Int. J. Non-Linear Mech. 28, 362 (1957).
30. De Hosson, J. T., Boom, G., Schlagowski, U.: Solution hardening in Al-Zn alloys. Acta Metall. 34, 1571-1583 (1986).
31. Mukherjee, A. K., Mote, J. D., Dorn, J. E.: Strain hardening of single aluminium crystals during polyslip. Trans. Met. Soc. AIME 233, 1559-1565 (1965).
32. El-Magd, E., Shaker, C.: Determination of internal back stress under time-dependent creep-conditions. 4th Int Conf. on Creep and Fracture of Engineering Materials and Structures 1990.
33. Ziaai-Moayyed, A. A.: Back stresses in monotonic and cyclic deformation: transient and steady-state-behavior. Dissertation, Stanford University 1981.
34. Butt, M., Feltham, P.: Review - solid-solution hardening. J. Mat. Sci. 28, 2557-2576 (1993).
35. Holt, D. L.: Dislocation cell formation in metals. Int. J. Non-Linear Mech. 41, 3197-3201 (1970).
36. McQueen, H. J., Hockett, J. E.: Microstructures of aluminium compressed at various rates and temperatures. Metall Trans, 1, 2997-3004 (1970).
37. Haasen, P.: Plastic deformation of nickel single crystals at low temperatures. Phil. Mag. 3, 348-418 (1958).
38. Hirsch, P. B., Mitchell, T. E.: Dislocation structures in deformed single crystal and work-hardening theories. In: Work hardening (Hirth, J. P., Wertman, J., eds.). New York: Gordon and Breach 1968.
39. Friedel, J.: On the linear work hardening rate of f.c.c. single crystals. Phil. Mag. 46, 1169-1186 (1955).
40. Friedel, J., Saada, G.: Introductory remarks on the nature of strain hardening in single crystals. In: Work hardening (Hirth, J. P.., Weertman, J., eds.). New York: Gordon and Breach 1968.
41. Kuhlmann-Wilsdorf, D.: Unified theory of stages II and III of work-hardening in pure f.c.c. metal crystals. In: Work hardening (Hirth, J. P., Weertman, J., eds.). New Jork: Gordon and Breach 1968.
42. Hirsch, P. B.: Work hardening. In: The physics of metals S. Defects (Hirsch, P. B., ed.), pp. 189-246. Cambridge: University Press 1975.
43. Seeger, A.: Recent progress in the understanding of work-hardening of f.c.c. single crystals. In: Work hardening (Hirth, J. P., Weertman, J., eds.). New York: Gorden and Breach 1968.
44. Basinski, Z. S.: Thermally activated glide in face-centred cubic metals and its application to the theory of strain hardening. Phil. Mag. 4, 393-432 (1959).
45. Mughrabi, H.: Description of the dislocation structures after unidirectional deformation at low temperature. In: Constitutive equations in plasticity (Argon, A. S., ed.), pp. 199-250. MIT-Press: Cambridge 1975.
46. Mitra, S. K., Osborne, P. W., Dorn, J. E.: On the intersection mechanism of plastic deformation in aluminium single crystals. Trans. Metall. Soc. AIME 221, 1206-1214 (1961).
47. Hasegawa, T., Yakou, T., Karashima, S.: Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium. Mat. Sci. Eng. 20, 267-276 (1975).
48. Mecking, H.: Strain hardening and dynamic recovery. In: Dislocation modelling of physical systems (Ashby, M. F., ed.), pp. 197-202. Proc. on the Int. Conf., Gainesville. Oxford: Pergamon Press 1981.
49. Mecking, H., Gottstein, G.: Recovery and recrystallization during deformation. In: Recrystallization of metallic materials (Haessner, F., ed.). Stuttgart: Dr. Rieder Verlag 1978.
50. Kuhlmann-Wilsdorf, D.: Theory of plastic deformation: properties of low energy dislocation structures. Mat. Sci. Eng. A 113, 1-39 (1989).
51. Seeger, A.: The mechanism of glide and work-hardening in f.c.c. and h.c.p. metals. In: Dislocation and mechanical properties of crystals (Fisher, J. C., Johnston, W. G., Thomson, R., eds.), pp. 243-329 General Electric 1957.
52. Mecking, H., Kocks, U. F.: Kinetics of flow and strain-hardening. Acta Metall. 10, 1865-1875 (1981).
53. Follansbee, P. S., Kocks, U. F.: A constitutive description of the deformation of copper based on the use of the mechanical treshold as an internal state variable. Acta Metall. 36, 81-93 (1988).
54. Mecking, H., Luecke, K.: Analysis of stage III hardening of f.c.c. metals on the basis of themally activated cross slip. Second Intern. Conf. on the Strength of Metals and Alloys, pp. 470-474 (1970).
55. Aernoudt, E., Gil-Sevillano, J., Van Houtte, P.: Structural background of yield and flow. In: Constitutive relations and their physical basis (Andersen, S. I, ed.), pp. 1-38. Denmark, Riso Natl. Lab. 1987.
56. Gil Sevillano, J.: The cold worked - state. In: Rekristallisation '92, pp. 19-27 (1992).
57. Mecking, H., Estrin, Y.: Microstructure-related constitutive modelling of plastic deformation. In: Constitutive relations and their physical basis (Andersen, S. I, ed.), pp. 123-145 Denmark: Riso Natl. Lab. 1987.
58. Nix, W. D., Gibeling, J. C., Huges, D. A.: Time-dependent deformation of metals. Metall. Trans. A 16, 2215-2226 (1985).
59. Nix, W. D., Ilschner, B.: Mechanisms controlling creep of single phase metals and alloys. In: Strength of metals and alloys, ICSMA 5 (Haasen, P., Gerold, V., Kostorz, G., eds). Aachen: Pergamon Press 1979.
60. Mughrabi, H.: Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals. Acta Metall. 31, 1367-1379 (1983).
61. Blum, W., Straub, S., Vogler, S.: Creep of pure materials and alloys. In: High temperatures materials and processes (Blum, W., Straub, S., Vogler, S., eds.), pp. 31-47. Erlangen: Inst. f. Werkstoffe 1993.
62. Schlums, H.: Ein stochastisches Werkstoffmodell zur Beschreibung von Kriechen und zyklischem Verhalten metallischer Werkstoffe. Braunschweig Series on Mechanics, 5, Braunschweig: Mechanik-Zentrum 1992.
63. Miller, A. K.: An inelastic constitutive model for monotonic, cyclic and creep deformation: Part I: Equations development and analytical procedures. J. Eng. Mat. Tech. 97, 106-113 (1976).
64. Chan, K. S., Lindholm, U. S., Bodner, S. R.: High temperature inelastic deformation under uniaxial loading: theory and experiment. J. Eng. Mat. Tech. 111, (1989).
65. Hasegawa, T., Ikeuchi, Y., Karashima, S.: Internal stress and dislocation structure during sigmoidal transient creep. Met. Sci. J. 6, 78-82 (1972).
66. Heinrich, H., Neuhaus, R., Schwink, C.: Dislocation structure and densities in tensile deformed CuMn crystals oriented for single glide. Phys. Stat. Sol. A131, 299-305 (1992).
67. Amodeo, R. J.: Dynamic simulation of dislocation pattern formation in metals during high temperature monotonic and cyclic deformation. Dissertation, University of California 1988.
68. Amodeo, R. J., Ghoniem, M. M.: Dislocation dynamics I. A proposed methology for deformation micromechanics. Phys. Rev. B41, 6958-6976 (1990).
69. Hesselbarth, H.: Simulation von Versetzungsstrukturbildung, Rekristallisation und Kriechschädigung mit dem Prinzip der Zellulären Automaten. Braunschweig Series on Mechanics 4. Braunschweig: Mechanik-Zentrum 1992.
70. Nordstrom, T. V., Barrett, C. R.: Recovery of high temperature deformed Ni-Al alloys. J. Mat. Sci. 1052-1060 (1972).
71. Ahlquist, C. N., Gasca-Neri, R., Nix, W. D.: A phenomenological theory of steady state creep based on average internal and effective stresses. Acta Metall. 18, 663-671 (1970).
72. Kocks, U. F., Mecking, H.: A mechanism for static and dynamic recovery. In: Strength of metals and alloys (Haasen, P., Gerold, V., Kostorz, G., eds.), pp. 345-350. Proc. of the 5th HICSMA-Conf., Aachen: Pergamon Press 1980.
73. Kassner, M. E., Miller, A. K., Sherby, O. D.: The separate roles of subgrains and forest dislocations in the isotropic hardening of type 304 stainless steel. Metall. Trans. A 13, 1977-1986 (1982).
74. Argon, A. S., Takeuchi, C.: Internal stresses in power-law creep. Acta Metall. 29, 1877-1884 (1981).
75. Gottstein, G., Argon, A. S.: Dislocation theory of strain hardening and steady state deformation in creep and constant strain rate tests. In: Creep and fracture of engineering materials and structures (Wilshire, B., Owen, D. R. J., eds.), pp. 15-26. Swansea: Pineridge Press 1984.
76. Gottstein, G., Argon, A. S.: Dislocation theory of steady state deformation and its approach in creep and dynamic tests. Acta Metall. 35, 1261-1271 (1987).
77. Prinz, F. B., Argon, A. S.: The evolution of plastic resistance in large strain plastic flow of single phase subgrain forming metals. Acta Metall. 32, 1021-1030 (1984).
78. Mecking, H.: Description of hardening curves of f.c.c. single and polycrystals. In: Work hardening in tension and fatigue (Thompson, A. W., ed.), pp. 67-88. Ohio 1975.
79. Prinz, F., Argon, A. S., Moffatt, W. C.: Recovery of dislocation structures in plastically deformed copper and nickel single crystals. Acta Metall. 30, 821-830 (1982).
80. Kocks, U. F.: Law for work hardening and low-temperature creep. J. Eng. Mat. Tech. Trans of the ASME 97, 76-85 (1976).
81. Cernocky, E. P., Krempl, E.: A non-linear uniaxial integral constitutive equation incorporating rate effects, creep and relaxation. Int. J. Non-Linear Mech. 14, 183-203 (1979).
82. Chaboche, J. L.: Constitutive equations for cyclic plasticity. Int. J. Plast. 5, 247-302 (1989).
83. Haupt, P., Korzen, M.: A new constitutive model of the phenomenological representation of rate-dependent and rate-independent material behavior. Proc. of Mecamat, The Inelastic Behavior of Solids, pp. 41-52 (1989).
84. Szepan, F.: Ein elastisch-viskoplastisches Stoffgesetz zur Beschreibung großer Formänderungen unter Berücksichtigung der thermomechanischen Kopplung. Mitteilungen aus dem Institut für Mechanik 70. Bochum 1989.
85. Estrin, Y.: A unified constitutive model with one structure parameter. Proc. of Mecamat, Inelastic Behavior of Solids, pp. 537-546 (1989).
86. Feltham, P.: A stochastic model of creep. Phys. Stat. Sol. 30, 135-146 (1968).
87. Täubert, P.: Eine Kriechtheorie für Metalle unter Berücksichtigung von Verfestigung und Erholung. Deutsche Akademie der Wissenschaften, Klasse Mathematik, Physik, Technik. 7, (1958).
88. Steck, E. A.: A stochastic model for the high-temperature plasticity of metals. Int. J. Plast. 5, 243-258 (1985).
89. Steck, E. A.: A stochastic model for the interaction of plasticity and creep in metals. Nucl. Eng. Design. 114, 285-294 (1989).
90. Gerdes, R.: Ein stochastisches Werkstoffmodell für das inelastische Materialverhalten metallischer Werkstoffe im Hoch- und Tieftemperaturbereich. Braunschweiger Series on Mechanics 20. Braunschweig: Mechanik-Zentrum 1995.
91. Gifkins, R. C.: Transitions in creep behavior. J. Mat. Sci. 5, 156-165 (1970).
92. Siethoff, H.: Change in steady - state deformation mechanism of f.c.c. metals at intermediate temperatures. Z. Metallkunde 77 (1986).
93. Mecking, H.: Bestimmung der Werkstoffparameter für das Kriechen von Aluminium-Legierungen. Abschlußbericht zum DFG-Forschungsvorhaben Me 428/7 (1989).
94. Steck, E. A., Gerdes, R., Lewerenz, M.: A stochastic constitutive model for high temperatures and its application to three-dimensional structures. In: Mathematical Modelling and Scientific Computing, special issue on Materials Modelling (to appear).
95. Rie, K. T., Wittke, H.: Inelastisches Stoffgesetz und zyklisches Werkstoffverhalten im LCF-Bereich. In: Stoffgesetz für das inelastische Verhalten metallischer Werkstoffe. SFB 319. Braunschweig 1993.