Fatigue crack growth behaviour of SM45C steel under cyclic mode I with superimposed static mode II loadings

Fatigue and Fracture of Engineering Materials and Structures

Volumn 20, Issue 7, 1997, Pages 1059-1074

  You, B R ^a,b   Lee, S B ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^b LS Industrial Systems Co Ltd   (South Korea)

Author keywords

Adhesive wear; Crack locking; Crack surface interference; Mixed mode fatigue

Indexed keywords

CRACK PROPAGATION; FATIGUE OF MATERIALS; FATIGUE TESTING; LOADS (FORCES); STRESS INTENSITY FACTORS; SURFACE PHENOMENA;

ADHESIVE WEAR; CRACK LOCKING; CRACK SURFACE INTERFERENCE; MIXED MODE FATIGUE CRACKING; STEEL SM45C;

STEEL;

EID: 0030677939     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.1997.tb01548.x     Document Type: Article

References (60)

1. V. Srinivas and P. Vasudevan (1993) Studies of mixed-mode crack propagation in D16AT aluminium alloy. Engng Fract. Mech. 45, 415-430.
2. H. Zhinzhong, H. Lihua and C. Shuzhen (1992) A study of shear fatigue crack mechanisms. Fatigue Fract. Engng Mater. Struct. 15, 563-572.
3. H. W. Liu (1985) Shear fatigue crack growth: A literature survey. Fatigue Fract. Engng Mater. Struct. 8, 295-313.
4. S. B. Lee (1980) Evaluation of theories on multiaxial fatigue with discriminating specimen. Ph.D. thesis, Stanford University.
5. B. R. You and S. B. Lee (1996) A critical review on multiaxial fatigue assessments of metals. Int. J. Fatigue 18, 235-244.
6. M. W. Brown and K. J. Miller (1982) A theory for fatigue failure under multiaxial low-cycle fatigue life. In: Low-cycle Fatigue and Life Prediction, ASTM STP 770, pp. 482-499.
7. P. Paris and F. Erdogan (1963) A critical analysis of crack propagation laws. J. Basic Engng 85, 528-534.
8. W. Elber (1971) The significance of fatigue crack closure. In: Damage Tolerance in Aircraft Structure, ASTM STP 486, pp. 230-259.
9. S. Iida and A. S. Kobayashi (1969) Crack propagation rate in 7075-T6 plates under cyclic tensile stress and transverse shear loading, J. Bas. Engng 9, 764-769.
10. R. Roberts and J. Kibler (1971) Mode II fatigue crack propagation. J. Bas. Engng 93, 671-680.
11. T. Yokobori, I. Maekawa, T. A. Yokobori, Jr., K. Sato and Y. Ishazaki (1982) Proc. Symposium on Absorbed Spectrometry Energy/Strain Energy Density, pp. 45-55.
12. H. Kordisch, J. Riedmuller and E. Sommer (1982) Proc. Symposium on Absorbed Spectrometry Energy/Strain Energy Density, pp. 33-43.
13. F. Hourlier and A. Pineau (1982) Fatigue crack propagation behaviour under complex loading. Fatigue Engng Mater. Struct. 5, 287-302.
14. F. Hourlier, H. d'Hondt, M. Truchon and A. Pineau (1985) Fatigue crack path behaviour under polymodal fatigue. Multiaxial fatigue, ASTM STP 853, pp. 228-247.
15. C. J. Beevers, K. Bell, R. L. Carlson and E. A. Starke (1984) A model for fatigue crack closure. Engng Fract. Mech. 19, 93-100.
16. R. L. Carlson and C. J. Beevers (1985) A mixed-mode fatigue crack closure model, Engng Fract. Mech. 12, 651-660.
17. T. S. Gross and D. A. Mendelsohn (1988) On the effect of crack face contact and friction due to fracture surface roughness in edge cracks subjected to external shear. Engng Fract. Mech. 31, 405-420.
18. T. S. Gross and D. A. Mendelsohn (1989) Mode I stress intensity factors induced by fracture surface roughness under pure mode III loading: Application to the effect of loading modes on stress corrosion crack growth. Metall. Trans. A 20A, 1989-1999.
19. T. S. Gross and D. A. Mendelsohn (1988) An analysis of fractional effects on cylindrical mode III fatigue crack propagation specimens. Fatigue Fract. Mater. Struct. 11, 167-178.
20. L. P. Pook (1977) An observation on mode II fatigue crack growth threshold behaviour Int. J. Fracture 13, 867-869.
21. M. C. Smith and R. A. Smith (1988) Toward an understanding of mode II fatigue crack growth. In: Basic Questions in Fatigue, Vol. I, ASTM STP 924, pp. 268-280.
22. E. W. Smith and K. J. Pascoe (1985) Fatigue crack initiation and growth in a high strength ductile steel subject to in-plane biaxial loading. In: Multiaxial Fatigue, ASTM STP 853, pp. 111-135.
23. S. E. Stanzl, M. Czegley, H. R. Mayer and E. K. Tschegg (1989) Fatigue crack growth under combined mode I and mode II loading. In: Fracture Mechanics: Perspectives and Directions (Twentieth Symposium), ASTM STP 1020, pp. 479-496.
24. A. M. Abdel Mageed and R. K. Pandey (1992) Studies on cyclic crack path and the mixed-mode crack closure behaviour in Al-alloy. Int. J. Fatigue 14, 21-29.
25. K. Kitagawa, R. Yuuki, K. Tohgo and M. Tanabe (1985) ΔK-dependency of fatigue growth of single and mixed-mode cracks under biaxial stresses. In: Multiaxial Fatigue, ASTM STP 853, pp. 164-183.
26. D. Bai-ping, L. Niau and W. Zhang-Zhong (1994) Influence of mode I, II, and III overloading on the fatigue threshold of mode I. Int. J. Fatigue 16, 315-320.
27. K. J. Miller and C. D. Hopper (1977) Fatigue crack propagation in biaxial stress fields. J. Strain Analysis 12, 23-28.
28. G. C. Sih and B. M. Barthelemy (1980) Mixed mode fatigue crack growth prediction. Engng Fract. Mech. 13, 439-451.
29. A. T. Yokobori, Jr., T. Yokobori, K. Sato and K. Syoji (1985) Fatigue crack growth under mixed modes I and II. Fatigue Fract. Engng Mater. Struct. 8, 315-325.
30. Q. Gao and X. Chen (1989) A fatigue life prediction methodology for cylindrical shell with an inclined crack under torsion. Theoret. App. Fract. Mech. 12, 155-160.
31. S. Suresh and R. O. Ritchie (1982) A geometric model for fatigue crack closure induced by fracture surface roughness. Metall. Trans. A 13A, 1627-1631.
32. R. O. Ritchie and S. Suresh (1982) Communications: Some considerations on fatigue crack closure at near-threshold stress intensities due to fracture surface morphology. Metall. Trans. A 13A, 937-940.
33. D. Taylor (1989) Fatigue Threshold. Butterworth & Co. Ltd., U.K.
34. A. D. Sakar (1976) Wear of Metals. Pergamon Press, U.K.
35. E. Rabinowicz (1965) Friction and Wear of Materials. Wiley, NY
36. E. Rabinowicz (1961) Influence of surface energy on friction and wear phenomena. J. App. Mech. 32, 1440-1444.
37. C. D. Carmann, C. C. Turner and B. M. Hillberry (1988) A method for determining crack opening load from load-displacement data. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 214-221.
38. J. K. Donald (1988) A procedure for standardizing crack closure levels. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 222-229.
39. L. J. Robertson and M. T. Kirk (1988) A statistical approach to crack closure determination. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 230-246.
40. C. Y. Kim and J. H. Song (1993) An automated procedure for determining crack opening from differential displacement signal data. Int. J. Fatigue 15, 301-310.
41. M. H. El Haddad, K. N. Smith and T. H. Topper (1978) A strain based intensity factor solution for short fatigue cracks initiating from notches. In: Fracture Mechanics, ASTM STP 667, pp. 274-289.
42. G. C. Sih (1974) Strain energy density factor applied to mixed-mode crack problems. Int. J. Fract. 10, 305-321.
43. C. Wei-Ren and L. M. Keer (1991) Fatigue crack growth in mixed-mode loading. J. Engng Mater. Technol. 113, 222-227.
44. A. Otsuka, K. Mori and T. Miyata (1975) The condition of fatigue crack growth in mixed-mode condition. Engng Fract. Mech. 7, 429-439.
45. H. V. Lakshminarayana and M. V. V. Murthy (1976) On stress around an arbitrarily oriented crack in a cylindrical shell. Int. J. Fract. 12, 547-566.
46. R. Kumar and S. B. L. Garg (1989) Influence of stress ratio and material properties on effective stress range ratio and crack growth. Engng Fract. Mech. 32, 195-202.
47. R. Kumar (1992) Review on crack closure for constant amplitude loading in fatigue. Engng Fract. Mech. 42, 389-400.
48. K. Hellan (1984) Introduction to Fracture Mechanics. McGraw-Hill Book Co.
49. V. N. Shlyannikov and N. Z. Braude (1992) A model for predicting crack growth rate for mixed-mode fracture under biaxial loads. Fatigue Fract. Engng Mater. Struct. 15, 825-844.
50. A. Abdel and R. K. Pandey (1991) Mixed mode crack growth under static and cyclic loading in Al-alloy sheets. Engng Fract. Mech. 40, 371-385.
51. E. K. Tschegg (1983) Sliding mode crack closure and mode III fatigue crack growth in mild steel. Acta Metall. 31, 1323-1330.
52. M. W. Brown, E. Hay and K. J. Miller (1985) Fatigue at notches subjected to reversed torsion and static axial loads. Fatigue Fract. Engng Mater. Struct. 8, 243-258.
53. F. Hourlier, D. McLean and A. Pineau (1978) Fatigue crack growth behaviour of Ti-5Al-2.5Sn alloy under complex stress (mode I + steady mode III). Metals Tech. 154-158.
54. H. Nayeb-Hashemi, F. A. McClintock and R. O. Ritchie (1983) Micro-mechanical modelling of mode III fatigue crack growth in rotor steels. Int. J. Fract. 23, 163-185.
55. J. R. Yates (1991) Fatigue thresholds under mixed-mode (I + II) loading. Int. J. Fatigue 13, 383-388.
56. Gao Hua, M. W. Brown and K. J. Miller (1982) Mixed-mode fatigue thresholds. Fatigue Fract. Engng Mater. Struct. 5, 1-17.
57. L. P. Pook (1971) The effect of crack angle on fracture toughness. Engng Fract. Mech. 3, 205-218.
58. L. Banks-sills and S. Daniel (1989) On the influence of crack plane orientation in fatigue crack propagation and catastrophic failure. In: Fracture Mechanics: Perspective and Directions, ASTM STP 1020, pp. 479-513.
59. N. Nayeb-Hashemi (1987) Failure modes of specimen containing surface flaws under cyclic torsion. Exp. Mech. March, pp. 51-56.
60. K. Kathiresan, T. R. Brussat and J. L. Rudd (1985) Crack growth analysis and correlations for the attachment lugs. J. Aircraft 22, 818-824.